MCC R SMAJ10AHE3 THRU SMAJ85CAHE3 Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * Halogen free For Surface Mount Applications Unidirectional And Bidirectional Low Inductance High Temp Soldering: 260C for 10 Seconds At Terminals For Bidirectional Devices Add "C" To The Suffix of The Part Number: i.e.SMAJ10CAHE3 for 5% Tolerance Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) UL Recognized File # E480232 AEC-Q101 Qualified * * * 0HFKDQLFDO'DWD * * * * 400 Watt Transient Voltage Suppressors 10 to 85 Volts DO-214AC (SMA)( LEAD FRAME) A Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Manufacturing code added for better tracking Polarity: Indicated by cathode band except bi-directional types B 0D[LPXP5DWLQJ * * * C Operating Temperature: -55C to +175C Storage Temperature: -55C to +175C Typical Thermal Resistance: 100 /W Junction to Ambient F H D Peak Pulse Current on 10/1000 us Wave form IPPM G See Table 1 Note 2 E DIMENSIONS Peak Pulse Power Dissipation Steady State Power Dissipation Note: PPPM PM(AV) Min 400 W 1.5 W Note 2, 6 Note 2, 5 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 per Fig.2. 3. Mounted on 5.0mm2 copper pads to each terminal. 4. 8.3ms, single half sine wave duty cycle = 4 pulses per Minutes maximum. 5. Lead temperature at TL = 75 . 6. Peak pulse power waveform is 10/1000us DIM A B C D E F G H INCHES MIN .157 .098 .006 .030 .188 .078 .050 .002 MM MIN 4.00 2.50 0.152 0.76 4.80 2.00 1.27 0.051 MAX .181 .114 .012 .060 .208 .096 .064 .008 MAX 4.60 2.90 0.305 1..52 5.28 2.44 1.63 0.203 NOTE SUGGESTED SOLDER PAD LAYOUT 0.090 " 0.085 " 0.070" www.mccsemi.com Revision: C 1 of 4 2016/08/01 MCC R Micro Commercial Components SMAJ10AHE3 thru SMAJ85CAHE3 PEAK PULSE POWER(Ppp) OR CURRENT(Ipp) DERATING IN PERCENTAGE % PPPM , PEAK PULSE POWER, KW 100 100 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 3 TA = 25 C 10 1.0 MOUNTED ON 5.0mm 2 COPPER LAND AREAS 0.1 0.1us 1.0 us 10 us 100 us 1.0ms 75 50 25 0 10ms 0 25 td, PULSE WIDTH, SEC 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, C Fig. 1-PEAK PULSE POWER RATING CURVE Fig. 2-PULSE RATING CURVE 10,000 40,000 150 20,000 Pulse Width(td) is Defined as the Point Where the Peak Current sec CJ, CAPACITANCE, pF Ippm, PEAK PULSE CURRENT, % TA = 25 C tf = 10 Decays to 50% of lpp Peak Value Ippm 100 Half Value- Ipp 2 10/1000 50 TJ = 25 C f = 1.0MHz Vsig = 50mVp-p sec Waveform as Defined by R.E.A. MEASURED AT ZERO BIAS 1,000 6,000 4,000 2,000 100 MEASURED AT STAND-OFF VOLTAGE(VMW) 500 200 0 e-kt td 0 1.0 2.0 3.0 10 1.0 4.0 2.0 5.0 10 20 50 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS t, TIME , ms PM(AV), STEADY STATE POWER DISSIPATION (W) Fig. 3-PULSE WAVEFORM Fig. 4-TYPICAL JUNCTION CAPACITANCE 1.5 1.2 0.9 0.6 0.3 0.0 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE (C) 200 Fig.5-Steady State Power Derating Curve Revision: C www.mccsemi.com 2 of 4 2016/08/01 MCC SMAJ10AHE3 thru SMAJ85CAHE3 R Micro Commercial Components ELECTRICAL CHARACTERISTICS @25qC MCC PART NUMBER UNI-POLAR SMAJ10AHE3 SMAJ11AHE3 SMAJ12AHE3 SMAJ13AHE3 SMAJ14AHE3 SMAJ15AHE3 SMAJ16AHE3 SMAJ17AHE3 SMAJ18AHE3 SMAJ20AHE3 SMAJ22AHE3 SMAJ24AHE3 SMAJ26AHE3 SMAJ28AHE3 SMAJ30AHE3 SMAJ33AHE3 SMAJ36AHE3 SMAJ40AHE3 SMAJ43AHE3 SMAJ45AHE3 SMAJ48AHE3 SMAJ51AHE3 SMAJ54AHE3 SMAJ58AHE3 SMAJ60AHE3 SMAJ64AHE3 SMAJ70AHE3 SMAJ75AHE3 SMAJ78AHE3 SMAJ85AHE3 BI-POLAR SMAJ10CAHE3 SMAJ11CAHE3 SMAJ12CAHE3 SMAJ13CAHE3 SMAJ14CAHE3 SMAJ15CAHE3 SMAJ16CAHE3 SMAJ17CAHE3 SMAJ18CAHE3 SMAJ20CAHE3 SMAJ22CAHE3 SMAJ24CAHE3 SMAJ26CAHE3 SMAJ28CAHE3 SMAJ30CAHE3 SMAJ33CAHE3 SMAJ36CAHE3 SMAJ40CAHE3 SMAJ43CAHE3 SMAJ45CAHE3 SMAJ48CAHE3 SMAJ51CAHE3 SMAJ54CAHE3 SMAJ58CAHE3 SMAJ60CAHE3 SMAJ64CAHE3 SMAJ70CAHE3 SMAJ75CAHE3 SMAJ78CAHE3 SMAJ85CAHE3 REVERSE STAND-OFF VOLTAGE VWM (VOLTS) 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 BREAKDOWN VOLTAGE V(BR) @ IT (VOLTS) MIN 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 MAX 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 I T (mA) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE @ IPP (VOLTS) 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 PEAK PULSE CURRENT IPP (AMPS) 23.5 22.0 20.1 18.6 17.2 16.4 15.3 14.5 13.7 12.3 11.2 10.3 9.5 8.8 8.3 7.5 6.9 6.2 5.7 5.5 5.2 4.9 4.6 4.3 4.1 3.9 3.5 3.3 2.2 2.9 MAXIMUM REVERSE LEAKAGE @VWM ID (PA) 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MARKING CODE 1 AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ RE RG RK RM RP RR RT RV 2 WX WZ XE XG XK XM XP XR XT XV XX XZ YE YG YK YM YP YR YT YV YX YZ ZE ZG ZK ZM ZP ZR ZT ZV For bi-directional type having Vrwm of 10 Volts and less, the IR limit is double. For parts without A, the VBR is +10%. Revision: C www.mccsemi.com 3 of 4 2016/08/01 MCC R Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 4 of 4 2016/08/01