High Collector-Emitter Voltage Type Photocoupler CNY17 Series Features Package Dimensions High collector-emitter voltage ( VCEO : 70V ) High input-output isolation voltage : ( VISO : 5,000Vrms ) Directly connectable to TTL UL approved ( No. E113898 ) VDE approved ( No. 094722 ) FIMKO approved (No. 209049) SEMKO approved (No. 9943380/01-20) NEMKO approved ( No. P99102464 ) DEMKO approved (No. 99-04182 ) CSA approve in progress Options Available : - Leads with 0.4" (10.16mm) Spacing (M Type) - Lead Bends for Surface Mounting (S Type) - Tape and Reel of Type I for SMD (Add "-TA" Suffix) - Tape and Reel of Type II for SMD (Add "-TA1" Suffix) - VDE 0884 Approvals (Add "-V" Suffix) 1. Telephone sets, telephone exchangers 2. System appliances, measuring instruments 3. Signal transmission between circuits of different potentials and impedances NOTES : 1. Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z Taiwan, Y Thailand). 4. Model No.: CNY17-1 ; CNY17-2 ; CNY17-3 ; CNY17-4 5. All dimensions are in millimeters (inches). 6. Tolerance is 0.25mm (.010") unless otherwise noted. 7. Specifications are subject to change without notice. PHOTOCOUPLER Applications 12-147 Ordering Information Part Number CNY17-1 CNY17-1M CNY17-1S CNY17-1S-TA CNY17-1S-TA1 CNY17-2 CNY17-2M CNY17-2S CNY17-2S-TA CNY17-2S-TA1 CNY17-3 CNY17-3M CNY17-3S CNY17-3S-TA CNY17-3S-TA1 CNY17-4 CNY17-4M CNY17-4S CNY17-4S-TA CNY17-4S-TA1 CNY17-1-V CNY17-1M-V CNY17-1S-V CNY17-1STA-V CNY17-1STA1-V CNY17-2-V CNY17-2M-V CNY17-2S-V CNY17-2STA-V CNY17-2STA1-V CNY17-3-V CNY17-3M-V CNY17-3S-V CNY17-3STA-V CNY17-3STA1-V CNY17-4-V CNY17-4M-V CNY17-4S-V CNY17-4STA-V CNY17-4STA1-V 12-148 Package 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type Safety Standard Approval I) II) UL approved FIMKO approved SEMKO approved NEMKO approved DEMKO approved CSA approve in progress Application part number CNY17-1 CNY17-2 I) II) CNY17-3 I) II) CNY17-4 I) II) VDE approved CNY17-1 I) II) CNY17-2 I) II) I) II) I) II) CNY17-3 CNY17-4 Ratings and Characteristics Absolute Maximum Ratings (Ta=25 ) Parameter Input Output Symbol Rating Unit Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 100 mW Collector-Emitter Voltage V CEO 70 V Emitter-Collector Voltage V ECO 7 V Collector-Base Voltage V CBO 70 V IC 150 mA mW Cllector Current PC 150 P tot 250 mW V iso 5,000 Vrms Operating Temperature Topr -55~+100 Storage Temperature Tstg -55~+150 Tsol 260 Collector Power Dissipation Total Power Dissipation *1.Isolation Voltage *2.Soldering Temperature *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 seconds Absolute Maximum Ratings (Ta=25 ) Input Symbol 1.45 1.65 V Conditions IR 10 Terminal Capacitance Ct 100 pF V=0, f=1MH Z Collector Dark Current I CEO 50 nA V CE =10V, I F=0 Breakdown Voltage Collector-Base Breakdown Voltage Current *1 Transfer Ratio Collector-Emitter Saturation Voltage I F =60mA V R =6V 70 V I C=0.1mA I F =0 BV ECO 7 V I E=10 I F =0 BV CBO 70 V I C=0.1mA I F =0 % I F =10mA V CE =5V V I F =10mA I C=2.5mA CNY17-1 40 80 CNY17-2 63 125 100 200 160 320 CNY17-3 A BV CEO CTR CNY17-4 IC *1 CTR= I F Unit. VF Emitter-Collector Characteristics Max. Reverse Current Breakdown Voltage Transfer Typ. Forward Voltage Collector-Emitter Output Min. V CE (sat) 0.3 100 A DC500V 40~60%R.H. Isolation Resistance Riso Floating Capacitance Cf Response Time (Rise) tr 5 10 S V CC =10V, IC =2mA Response Time (Fall) tf 5 10 S R L =100 G 2 PHOTOCOUPLER Parameter pF V=0, f=1MHZ 100% 12-149 Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 12-150 12-151 PHOTOCOUPLER