BRIGHT LED ELECTRONICS CORP. BL-BD03V1-FA6-TBF22.5A SINCE 1981 Features: Package dimensions 1. Chip material: AlGaAs/GaAs 3.00(.118) 2. Emitted color : Super Red 3. Lens Appearance : Water Clear 4. Low power consumption. 5.30(.209) 0.81(.032) 5. High efficiency. 6. Versatile mounting on P.C. Board or panel. 1.5(.059) MAX. 6.0 0.5 (.236 .020) 7. Low current requirement. 9. This product don't contained restriction substance, compliance ROHS standard. CATHODE 8. 3mm diameter package 0.5(.02) SQ.TYP. 3.80(.150) Flat Denotes Cathode 1.0(.039) MIN. 5.08(.200)NOM. Applications: 1. TV set Notes: 2. Monitor 1. All dimensions are in millimeters (inches). 3. Telephone 2. Tolerance is 0.25mm (0.01") unless otherwise specified. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 4. Computer 5. Circuit board Absolute Maximum Ratings(Ta=25) Parameter Symbol Rating Unit Power Dissipation Pd 80 mW Forward Current IF 30 mA Peak Forward Current*1 IFP 150 mA Reverse Voltage VR 5 V Operating Temperature Topr -40~80 Storage Temperature Tstg -40~85 Soldering Temperature Tsol 260(for 5 seconds) 1 * Condition for IFP is pulse of 1/10 duty and 0.1msec width. Ver.1.0 Page: 1 of 3 BRIGHT LED ELECTRONICS CORP. BL-BD03V1-FA6-TBF22.5A SINCE 1981 Electrical and optical characteristics(Ta=25) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF=20mA - 1.8 2.6 V Luminous Intensity Iv IF=20mA - 400 - mcd Reverse Current IR VR=5V - - 100 A Peak Wave Length p IF=20mA - 660 - nm Dominant Wave Length d IF=20mA - 643 - nm Spectral Line Half-width IF=20mA - 20 - nm Viewing Angle 21/2 IF=20mA - 30 - deg Typical Electro-Optical Characteristics Curves Fig.2 Forward current derating curve vs. Ambient temperature Fig.1 Relative intensity vs. Wavelength 1.0 60 Forward current(mA) Relative radiant intensity 50 0.5 40 30 20 10 0 610 660 0 710 20 Wavelength (nm) Fig.3 Forward current vs. Forward voltage Relative luminous intensity Forward current(mA) 80 100 3.0 40 30 20 10 1 2 3 4 2.5 2.0 1.5 1.0 0.5 0 -40 5 -20 0 20 40 60 Ambient temperature Ta() Forward voltage(V) Fig.5 Relative luminous intensity vs. Forward current Fig.6 Radiation diagram 0 2.0 10 20 30 Relative radiant intensity Relative luminous intensity(@20mA) 60 Fig.4 Relative luminous intensity vs. Ambient temperature 50 0 40 Ambient temperature Ta() 1.5 1.0 0.5 40 1.0 0.9 50 0.8 60 70 0.7 80 90 0 10 20 30 40 50 0.5 0.3 0.1 0.2 0.4 0.6 Forward current (mA) Ver.1.0 Page: 2 of 3 BRIGHT LED ELECTRONICS CORP. BL-BD03V1-FA6-TBF22.5A SINCE 1981 Tapping and packaging specifications(Units: mm) 3.0(.118) 3.8(.150) H1----------------22.5(.886)0.5 5.3(.209) 11.3 0.5 (.445 .02) H2-------------------6.0(.236)0.5 L--------------------11.0(.433) Max. ANODE H2 Wo-------------------------9.0(.35) P1-------------------------3.85(.15) H1 F--------------------------5.08(.20) P---------------------------12.7(.50) W2 L Wo D----------------------W1 W3 4.0(.157) W1----------------------10.0(.394) W2----------------4.0(.157) Max. P1 D F P W3--------------------18.0(.708) T T-----------------1.42(.055) Max. TxFxxx (5.08 PITCH PREFORMED LEADS) USER DIRECTION OF FEED Notes: 1.All dimensions are in millimeter (inch). 2.Tolerance is 0.25mm (0.01") unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package. Bin Limits 1. Intensity Bin Limits (At IF= 20mA) Bin Code Min. (mcd) Max. (mcd) : : : R 120 240 S 180 360 T 280 550 U 410 820 V 620 1230 : : : Bin x Intensity Bin Code Ver.1.0 Page: 3 of 3