TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
Digital Signal Processors
Data Manual
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Literature Number: SPRS230N
October 2003Revised May 2012
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Contents
1 F280x, F2801x, C280x DSPs .................................................................................................. 8
1.1 Features ...................................................................................................................... 8
1.2 Getting Started .............................................................................................................. 9
2 Introduction ...................................................................................................................... 10
2.1 Pin Assignments ........................................................................................................... 13
2.2 Signal Descriptions ........................................................................................................ 18
3 Functional Overview .......................................................................................................... 24
3.1 Memory Maps .............................................................................................................. 25
3.2 Brief Descriptions .......................................................................................................... 33
3.2.1 C28x CPU ....................................................................................................... 33
3.2.2 Memory Bus (Harvard Bus Architecture) .................................................................... 33
3.2.3 Peripheral Bus .................................................................................................. 33
3.2.4 Real-Time JTAG and Analysis ................................................................................ 34
3.2.5 Flash ............................................................................................................. 34
3.2.6 ROM .............................................................................................................. 34
3.2.7 M0, M1 SARAMs ............................................................................................... 34
3.2.8 L0, L1, H0 SARAMs ............................................................................................ 35
3.2.9 Boot ROM ....................................................................................................... 35
3.2.10 Security .......................................................................................................... 36
3.2.11 Peripheral Interrupt Expansion (PIE) Block ................................................................. 37
3.2.12 External Interrupts (XINT1, XINT2, XNMI) .................................................................. 37
3.2.13 Oscillator and PLL .............................................................................................. 37
3.2.14 Watchdog ........................................................................................................ 37
3.2.15 Peripheral Clocking ............................................................................................. 37
3.2.16 Low-Power Modes .............................................................................................. 37
3.2.17 Peripheral Frames 0, 1, 2 (PFn) .............................................................................. 38
3.2.18 General-Purpose Input/Output (GPIO) Multiplexer ......................................................... 38
3.2.19 32-Bit CPU-Timers (0, 1, 2) ................................................................................... 38
3.2.20 Control Peripherals ............................................................................................. 38
3.2.21 Serial Port Peripherals ......................................................................................... 39
3.3 Register Map ............................................................................................................... 39
3.4 Device Emulation Registers .............................................................................................. 41
3.5 Interrupts .................................................................................................................... 41
3.5.1 External Interrupts .............................................................................................. 44
3.6 System Control ............................................................................................................ 45
3.6.1 OSC and PLL Block ............................................................................................ 46
3.6.1.1 External Reference Oscillator Clock Option .................................................... 47
3.6.1.2 PLL-Based Clock Module ......................................................................... 48
3.6.1.3 Loss of Input Clock ................................................................................ 49
3.6.2 Watchdog Block ................................................................................................. 50
3.7 Low-Power Modes Block ................................................................................................. 51
4 Peripherals ....................................................................................................................... 52
4.1 32-Bit CPU-Timers 0/1/2 ................................................................................................. 52
4.2 Enhanced PWM Modules (ePWM1/2/3/4/5/6) ......................................................................... 54
4.3 Hi-Resolution PWM (HRPWM) .......................................................................................... 57
4.4 Enhanced CAP Modules (eCAP1/2/3/4) ............................................................................... 57
4.5 Enhanced QEP Modules (eQEP1/2) .................................................................................... 60
4.6 Enhanced Analog-to-Digital Converter (ADC) Module ............................................................... 62
4.6.1 ADC Connections if the ADC Is Not Used .................................................................. 65
4.6.2 ADC Registers .................................................................................................. 66
4.7 Enhanced Controller Area Network (eCAN) Modules (eCAN-A and eCAN-B) .................................... 67
2Contents Copyright © 2003–2012, Texas Instruments Incorporated
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
4.8 Serial Communications Interface (SCI) Modules (SCI-A, SCI-B) ................................................... 72
4.9 Serial Peripheral Interface (SPI) Modules (SPI-A, SPI-B, SPI-C, SPI-D) .......................................... 75
4.10 Inter-Integrated Circuit (I2C) ............................................................................................. 79
4.11 GPIO MUX ................................................................................................................. 81
5 Device Support ................................................................................................................. 85
5.1 Device and Development Support Tool Nomenclature ............................................................... 85
5.2 Documentation Support .................................................................................................. 87
5.3 Community Resources .................................................................................................... 92
6 Electrical Specifications ..................................................................................................... 93
6.1 Absolute Maximum Ratings .............................................................................................. 93
6.2 Recommended Operating Conditions .................................................................................. 94
6.3 Electrical Characteristics ................................................................................................. 94
6.4 Current Consumption ..................................................................................................... 95
6.4.1 Reducing Current Consumption .............................................................................. 99
6.4.2 Current Consumption Graphs ............................................................................... 100
6.5 Emulator Connection Without Signal Buffering for the DSP ....................................................... 102
6.6 Timing Parameter Symbology .......................................................................................... 103
6.6.1 General Notes on Timing Parameters ...................................................................... 103
6.6.2 Test Load Circuit .............................................................................................. 103
6.6.3 Device Clock Table ........................................................................................... 104
6.7 Clock Requirements and Characteristics ............................................................................. 105
6.8 Power Sequencing ....................................................................................................... 106
6.8.1 Power Management and Supervisory Circuit Solutions .................................................. 106
6.9 General-Purpose Input/Output (GPIO) ................................................................................ 109
6.9.1 GPIO - Output Timing ........................................................................................ 109
6.9.2 GPIO - Input Timing .......................................................................................... 110
6.9.3 Sampling Window Width for Input Signals ................................................................. 111
6.9.4 Low-Power Mode Wakeup Timing .......................................................................... 112
6.10 Enhanced Control Peripherals ......................................................................................... 115
6.10.1 Enhanced Pulse Width Modulator (ePWM) Timing ....................................................... 115
6.10.2 Trip-Zone Input Timing ....................................................................................... 115
6.10.3 External Interrupt Timing ..................................................................................... 117
6.10.4 I2C Electrical Specification and Timing .................................................................... 118
6.10.5 Serial Peripheral Interface (SPI) Master Mode Timing ................................................... 118
6.10.6 SPI Slave Mode Timing ...................................................................................... 123
6.10.7 On-Chip Analog-to-Digital Converter ....................................................................... 125
6.10.7.1 ADC Power-Up Control Bit Timing ............................................................. 126
6.10.7.2 Definitions ......................................................................................... 127
6.10.7.3 Sequential Sampling Mode (Single-Channel) (SMODE = 0) ............................... 128
6.10.7.4 Simultaneous Sampling Mode (Dual-Channel) (SMODE = 1) .............................. 129
6.11 Detailed Descriptions .................................................................................................... 130
6.12 Flash Timing .............................................................................................................. 131
6.13 ROM Timing (C280x only) .............................................................................................. 133
7 Migrating From F280x Devices to C280x Devices ................................................................. 134
7.1 Migration Issues .......................................................................................................... 134
8 Revision History .............................................................................................................. 135
9 Mechanical Data .............................................................................................................. 136
Copyright © 2003–2012, Texas Instruments Incorporated Contents 3
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
List of Figures
2-1 TMS320F2809, TMS320F2808 100-Pin PZ LQFP (Top View) ............................................................ 14
2-2 TMS320F2806 100-Pin PZ LQFP (Top View)................................................................................ 15
2-3 TMS320F2802, TMS320F2801, TMS320C2802, TMS320C2801 100-Pin PZ LQFP (Top View)..................... 16
2-4 TMS320F2801x 100-Pin PZ LQFP (Top View) .............................................................................. 17
2-5 TMS320F2809, TMS320F2808, TMS320F2806,TMS320F2802, TMS320F2801,
TMS320F28016, TMS320F28015, TMS320C2802, TMS320C2801
100-Ball GGM and ZGM MicroStar BGA™ (Bottom View) ................................................................. 17
3-1 Functional Block Diagram....................................................................................................... 25
3-2 F2809 Memory Map.............................................................................................................. 26
3-3 F2808 Memory Map.............................................................................................................. 27
3-4 F2806 Memory Map.............................................................................................................. 28
3-5 F2802, C2802 Memory Map.................................................................................................... 29
3-6 F2801, F28015, F28016, C2801 Memory Map............................................................................... 29
3-7 External and PIE Interrupt Sources............................................................................................ 43
3-8 Multiplexing of Interrupts Using the PIE Block ............................................................................... 43
3-9 Clock and Reset Domains ...................................................................................................... 45
3-10 OSC and PLL Block Diagram................................................................................................... 46
3-11 Using a 3.3-V External Oscillator............................................................................................... 47
3-12 Using a 1.8-V External Oscillator............................................................................................... 47
3-13 Using the Internal Oscillator .................................................................................................... 47
3-14 Watchdog Module................................................................................................................ 50
4-1 CPU-Timers....................................................................................................................... 52
4-2 CPU-Timer Interrupt Signals and Output Signal ............................................................................. 53
4-3 Multiple PWM Modules in a 280x System .................................................................................... 54
4-4 ePWM Sub-Modules Showing Critical Internal Signal Interconnections.................................................. 56
4-5 eCAP Functional Block Diagram............................................................................................... 58
4-6 eQEP Functional Block Diagram............................................................................................... 60
4-7 Block Diagram of the ADC Module ............................................................................................ 63
4-8 ADC Pin Connections With Internal Reference .............................................................................. 64
4-9 ADC Pin Connections With External Reference ............................................................................. 65
4-10 eCAN Block Diagram and Interface Circuit ................................................................................... 68
4-11 eCAN-A Memory Map ........................................................................................................... 69
4-12 eCAN-B Memory Map ........................................................................................................... 70
4-13 Serial Communications Interface (SCI) Module Block Diagram............................................................ 74
4-14 SPI Module Block Diagram (Slave Mode) .................................................................................... 78
4-15 I2C Peripheral Module Interfaces .............................................................................................. 80
4-16 GPIO MUX Block Diagram...................................................................................................... 81
4-17 Qualification Using Sampling Window......................................................................................... 84
5-1 Example of TMS320x280x/2801x Device Nomenclature ................................................................... 86
6-1 Typical Operational Current Versus Frequency (F2808) .................................................................. 100
6-2 Typical Operational Power Versus Frequency (F2808).................................................................... 100
6-3 Typical Operational Current Versus Frequency (C280x).................................................................. 101
6-4 Typical Operational Power Versus Frequency (C280x) ................................................................... 101
6-5 Emulator Connection Without Signal Buffering for the DSP .............................................................. 102
6-6 3.3-V Test Load Circuit......................................................................................................... 103
6-7 Clock Timing..................................................................................................................... 106
6-8 Power-on Reset................................................................................................................. 107
4List of Figures Copyright © 2003–2012, Texas Instruments Incorporated
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6-9 Warm Reset ..................................................................................................................... 108
6-10 Example of Effect of Writing Into PLLCR Register ......................................................................... 109
6-11 General-Purpose Output Timing.............................................................................................. 110
6-12 Sampling Mode ................................................................................................................. 110
6-13 General-Purpose Input Timing................................................................................................ 111
6-14 IDLE Entry and Exit Timing.................................................................................................... 112
6-15 STANDBY Entry and Exit Timing Diagram.................................................................................. 113
6-16 HALT Wake-Up Using GPIOn................................................................................................. 114
6-17 PWM Hi-Z Characteristics ..................................................................................................... 115
6-18 ADCSOCAO or ADCSOCBO Timing ........................................................................................ 117
6-19 External Interrupt Timing....................................................................................................... 117
6-20 SPI Master Mode External Timing (Clock Phase = 0) ..................................................................... 120
6-21 SPI Master Mode External Timing (Clock Phase = 1) ..................................................................... 122
6-22 SPI Slave Mode External Timing (Clock Phase = 0)....................................................................... 124
6-23 SPI Slave Mode External Timing (Clock Phase = 1)....................................................................... 125
6-24 ADC Power-Up Control Bit Timing ........................................................................................... 126
6-25 ADC Analog Input Impedance Model ........................................................................................ 127
6-26 Sequential Sampling Mode (Single-Channel) Timing...................................................................... 128
6-27 Simultaneous Sampling Mode Timing ....................................................................................... 129
Copyright © 2003–2012, Texas Instruments Incorporated List of Figures 5
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
List of Tables
2-1 Hardware Features (100-MHz Devices)....................................................................................... 11
2-2 Hardware Features (60-MHz Devices) ........................................................................................ 12
2-3 Signal Descriptions............................................................................................................... 18
3-1 Addresses of Flash Sectors in F2809 ......................................................................................... 30
3-2 Addresses of Flash Sectors in F2808 ......................................................................................... 30
3-3 Addresses of Flash Sectors in F2806, F2802................................................................................ 30
3-4 Addresses of Flash Sectors in F2801, F28015, F28016.................................................................... 31
3-5 Impact of Using the Code Security Module................................................................................... 31
3-6 Wait-states ........................................................................................................................ 32
3-7 Boot Mode Selection............................................................................................................. 35
3-8 Peripheral Frame 0 Registers .................................................................................................. 40
3-9 Peripheral Frame 1 Registers .................................................................................................. 40
3-10 Peripheral Frame 2 Registers .................................................................................................. 41
3-11 Device Emulation Registers..................................................................................................... 41
3-12 PIE Peripheral Interrupts ....................................................................................................... 43
3-13 PIE Configuration and Control Registers...................................................................................... 44
3-14 External Interrupt Registers..................................................................................................... 44
3-15 PLL, Clocking, Watchdog, and Low-Power Mode Registers .............................................................. 46
3-16 PLLCR Register Bit Definitions................................................................................................. 48
3-17 Possible PLL Configuration Modes ............................................................................................ 49
3-18 Low-Power Modes ............................................................................................................... 51
4-1 CPU-Timers 0, 1, 2 Configuration and Control Registers................................................................... 53
4-2 ePWM Control and Status Registers .......................................................................................... 55
4-3 eCAP Control and Status Registers ........................................................................................... 59
4-4 eQEP Control and Status Registers........................................................................................... 61
4-5 ADC Registers ................................................................................................................... 66
4-6 3.3-V eCAN Transceivers ...................................................................................................... 68
4-7 CAN Register Map .............................................................................................................. 71
4-8 SCI-A Registers .................................................................................................................. 73
4-9 SCI-B Registers .................................................................................................................. 73
4-10 SPI-A Registers................................................................................................................... 76
4-11 SPI-B Registers................................................................................................................... 76
4-12 SPI-C Registers .................................................................................................................. 77
4-13 SPI-D Registers .................................................................................................................. 77
4-14 I2C-A Registers................................................................................................................... 80
4-15 GPIO Registers .................................................................................................................. 82
4-16 F2808 GPIO MUX Table ........................................................................................................ 83
5-1 TMS320x280x, 2801x Peripheral Selection Guide .......................................................................... 87
6-1 TMS320F2809, TMS320F2808 Current Consumption by Power-Supply Pins at 100-MHz SYSCLKOUT........... 95
6-2 TMS320F2806 Current Consumption by Power-Supply Pins at 100-MHz SYSCLKOUT ............................. 96
6-3 TMS320F2802, TMS320F2801 Current Consumption by Power-Supply Pins at 100-MHz SYSCLKOUT........... 97
6-4 TMS320C2802, TMS320C2801 Current Consumption by Power-Supply Pins at 100-MHz SYSCLKOUT .......... 98
6-5 Typical Current Consumption by Various Peripherals (at 100 MHz) ..................................................... 99
6-6 TMS320x280x Clock Table and Nomenclature (100-MHz Devices)..................................................... 104
6-7 TMS320x280x/2801x Clock Table and Nomenclature (60-MHz Devices) .............................................. 104
6-8 Input Clock Frequency ......................................................................................................... 105
6-9 XCLKIN Timing Requirements - PLL Enabled ............................................................................. 105
6List of Tables Copyright © 2003–2012, Texas Instruments Incorporated
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6-10 XCLKIN Timing Requirements - PLL Disabled ............................................................................. 105
6-11 XCLKOUT Switching Characteristics (PLL Bypassed or Enabled) ...................................................... 105
6-12 Power Management and Supervisory Circuit Solutions ................................................................... 106
6-13 Reset (XRS) Timing Requirements .......................................................................................... 108
6-14 General-Purpose Output Switching Characteristics........................................................................ 109
6-15 General-Purpose Input Timing Requirements .............................................................................. 110
6-16 IDLE Mode Timing Requirements ........................................................................................... 112
6-17 IDLE Mode Switching Characteristics ....................................................................................... 112
6-18 STANDBY Mode Timing Requirements ..................................................................................... 113
6-19 STANDBY Mode Switching Characteristics ................................................................................ 113
6-20 HALT Mode Timing Requirements ........................................................................................... 114
6-21 HALT Mode Switching Characteristics ...................................................................................... 114
6-22 ePWM Timing Requirements ................................................................................................. 115
6-23 ePWM Switching Characteristics ............................................................................................ 115
6-24 Trip-Zone input Timing Requirements ....................................................................................... 115
6-25 High-Resolution PWM Characteristics at SYSCLKOUT = 60–100 MHz ................................................ 116
6-26 Enhanced Capture (eCAP) Timing Requirement .......................................................................... 116
6-27 eCAP Switching Characteristics ............................................................................................. 116
6-28 Enhanced Quadrature Encoder Pulse (eQEP) Timing Requirements .................................................. 116
6-29 eQEP Switching Characteristics ............................................................................................. 116
6-30 External ADC Start-of-Conversion Switching Characteristics............................................................. 117
6-31 External Interrupt Timing Requirements .................................................................................... 117
6-32 External Interrupt Switching Characteristics ................................................................................ 117
6-33 I2C Timing ...................................................................................................................... 118
6-34 SPI Master Mode External Timing (Clock Phase = 0) .................................................................... 119
6-35 SPI Master Mode External Timing (Clock Phase = 1) .................................................................... 121
6-36 SPI Slave Mode External Timing (Clock Phase = 0) ...................................................................... 123
6-37 SPI Slave Mode External Timing (Clock Phase = 1) ...................................................................... 124
6-38 ADC Electrical Characteristics (over recommended operating conditions) ............................................ 125
6-39 ADC Power-Up Delays......................................................................................................... 126
6-40 Current Consumption for Different ADC Configurations (at 12.5-MHz ADCCLK) ..................................... 126
6-41 Sequential Sampling Mode Timing........................................................................................... 128
6-42 Simultaneous Sampling Mode Timing ....................................................................................... 129
6-43 Flash Endurance for A and S Temperature Material ...................................................................... 131
6-44 Flash Endurance for Q Temperature Material .............................................................................. 131
6-45 Flash Parameters at 100-MHz SYSCLKOUT............................................................................... 131
6-46 Flash/OTP Access Timing .................................................................................................... 132
6-47 Minimum Required Flash/OTP Wait-States at Different Frequencies ................................................... 132
6-48 ROM/OTP Access Timing .................................................................................................... 133
6-49 ROM/ROM (OTP area) Minimum Required Wait-States at Different Frequencies..................................... 133
9-1 F280x Thermal Model 100-pin GGM Results............................................................................... 136
9-2 F280x Thermal Model 100-pin PZ Results.................................................................................. 136
9-3 C280x Thermal Model 100-pin GGM Results............................................................................... 136
9-4 C280x Thermal Model 100-pin PZ Results.................................................................................. 136
9-5 F2809 Thermal Model 100-pin GGM Results .............................................................................. 136
9-6 F2809 Thermal Model 100-pin PZ Results ................................................................................. 137
Copyright © 2003–2012, Texas Instruments Incorporated List of Tables 7
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Digital Signal Processors
Check for Samples: TMS320F2809,TMS320F2808,TMS320F2806,TMS320F2802,TMS320F2801,TMS320C2802,
TMS320C2801,TMS320F28016,TMS320F28015
1 F280x, F2801x, C280x DSPs
1.1 Features
1234
High-Performance Static CMOS Technology 128-Bit Security Key/Lock
100 MHz (10-ns Cycle Time) Protects Flash/OTP/L0/L1 Blocks
60 MHz (16.67-ns Cycle Time) Prevents Firmware Reverse Engineering
Low-Power (1.8-V Core, 3.3-V I/O) Design Three 32-Bit CPU Timers
JTAG Boundary Scan Support (1) Enhanced Control Peripherals
High-Performance 32-Bit CPU ( TMS320C28x™) Up to 16 PWM Outputs
16 x 16 and 32 x 32 MAC Operations Up to 6 HRPWM Outputs With 150-ps MEP
Resolution
16 x 16 Dual MAC Up to Four Capture Inputs
Harvard Bus Architecture Up to Two Quadrature Encoder Interfaces
Atomic Operations Up to Six 32-bit/Six 16-bit Timers
Fast Interrupt Response and Processing Serial Port Peripherals
Unified Memory Programming Model Up to 4 SPI Modules
Code-Efficient (in C/C++ and Assembly) Up to 2 SCI (UART) Modules
On-Chip Memory Up to 2 CAN Modules
F2809: 128K x 16 Flash, 18K x 16 SARAM
F2808: 64K x 16 Flash, 18K x 16 SARAM One Inter-Integrated-Circuit (I2C) Bus
F2806: 32K x 16 Flash, 10K x 16 SARAM 12-Bit ADC, 16 Channels
F2802: 32K x 16 Flash, 6K x 16 SARAM 2 x 8 Channel Input Multiplexer
F2801: 16K x 16 Flash, 6K x 16 SARAM Two Sample-and-Hold
F2801x: 16K x 16 Flash, 6K x 16 SARAM Single/Simultaneous Conversions
1K x 16 OTP ROM (Flash Devices Only) Fast Conversion Rate:
C2802: 32K x 16 ROM, 6K x 16 SARAM 80 ns - 12.5 MSPS (F2809 only)
C2801: 16K x 16 ROM, 6K x 16 SARAM 160 ns - 6.25 MSPS (280x)
Boot ROM (4K x 16) 267 ns - 3.75 MSPS (F2801x)
With Software Boot Modes (via SCI, SPI, Internal or External Reference
CAN, I2C, and Parallel I/O) Up to 35 Individually Programmable,
Standard Math Tables Multiplexed GPIO Pins With Input Filtering
Clock and System Control Advanced Emulation Features
Dynamic PLL Ratio Changes Supported Analysis and Breakpoint Functions
On-Chip Oscillator Real-Time Debug via Hardware
Watchdog Timer Module Development Support Includes
Any GPIO A Pin Can Be Connected to One of ANSI C/C++ Compiler/Assembler/Linker
the Three External Core Interrupts Code Composer Studio™ IDE
Peripheral Interrupt Expansion (PIE) Block That DSP/BIOS™
Supports All 43 Peripheral Interrupts Digital Motor Control and Digital Power
Endianness: Little Endian Software Libraries
Low-Power Modes and Power Savings
IDLE, STANDBY, HALT Modes Supported
Disable Individual Peripheral Clocks
(1) IEEE Standard 1149.1-1990 Standard Test Access Port and
Boundary Scan Architecture
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2TMS320C28x, Code Composer Studio, DSP/BIOS, MicroStar BGA, C28x, TI, TMS320C2000 are trademarks of Texas
Instruments.
3eZdsp is a trademark of Spectrum Digital.
4All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products conform to
Copyright © 2003–2012, Texas Instruments Incorporated specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Package Options Temperature Options
Thin Quad Flatpack (PZ) A: –40°C to 85°C (PZ, GGM, ZGM)
MicroStar BGA (GGM, ZGM) S: –40°C to 125°C (PZ, GGM, ZGM)
Q: –40°C to 125°C (PZ)
1.2 Getting Started
This section gives a brief overview of the steps to take when first developing for a C28x™ device. For
more detail on each of these steps, see the following:
Getting Started With TMS320C28x Digital Signal Controllers (literature number SPRAAM0).
C2000 Getting Started Website (http://www.ti.com/c2000getstarted)
Step 1. Acquire the appropriate development tools
The quickest way to begin working with a C28x device is to acquire an eZdsp™ kit for initial
development, which, in one package, includes:
On-board JTAG emulation via USB or parallel port
Appropriate emulation driver
Code Composer Studio™ IDE for eZdsp
Once you have become familiar with the device and begin developing on your own
hardware, purchase Code Composer Studio™ IDE separately for software development and
a JTAG emulation tool to get started on your project.
Step 2. Download starter software
To simplify programming for C28x devices, it is recommended that users download and use
the C/C++ Header Files and Example(s) to begin developing software for the C28x devices
and their various peripherals.
After downloading the appropriate header file package for your device, refer to the following
resources for step-by-step instructions on how to run the peripheral examples and use the
header file structure for your own software
The Quick Start Readme in the /doc directory to run your first application.
Programming TMS320x28xx and 28xxx Peripherals in C/C++ Application Report
(literature number SPRAA85)
Step 3. Download flash programming software
Many C28x devices include on-chip flash memory and tools that allow you to program the
flash with your software IP.
Flash Tools: C28x Flash Tools
TMS320F281x™ Flash Programming Solutions (literature number SPRB169)
Running an Application from Internal Flash Memory on the TMS320F28xxx DSP
(literature number SPRA958)
Step 4. Move on to more advanced topics
For more application software and other advanced topics, visit the TI™ website at
http://www.ti.com or http://www.ti.com/c2000getstarted.
Copyright © 2003–2012, Texas Instruments Incorporated F280x, F2801x, C280x DSPs 9
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
2 Introduction
The TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320F28015,
TMS320F28016, TMS320C2802, and TMS320C2801 devices, members of the TMS320C28x™ DSP
generation, are highly integrated, high-performance solutions for demanding control applications.
Throughout this document, TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802,
TMS320F2801, TMS320C2802, TMS320C2801, TMS320F28015, and TMS320F28016 are abbreviated as
F2809, F2808, F2806, F2802, F2801, C2802, C2801, F28015, and F28016, respectively. TMS320F28015
and TMS320F28016 are abbreviated as F2801x. Table 2-1 provides a summary of features for each
device.
10 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 2-1. Hardware Features (100-MHz Devices)
FEATURE TYPE(1) F2809 F2808 F2806 F2802 F2801 C2802 C2801
Instruction cycle (at 100 MHz) 10 ns 10 ns 10 ns 10 ns 10 ns 10 ns 10 ns
18K 18K 10K 6K 6K 6K 6K
Single-access RAM (SARAM) (16-bit word) (L0, L1, M0, M1, (L0, L1, M0, M1, (L0, L1, M0, M1) (L0, M0, M1) (L0, M0, M1) (L0, M0, M1) (L0, M0, M1)
H0) H0)
3.3-V on-chip flash (16-bit word) 128K 64K 32K 32K 16K
On-chip ROM (16-bit word) 32K 16K
Code security for on-chip flash/SARAM/OTP blocks Yes Yes Yes Yes Yes Yes Yes
Boot ROM (4K x 16) Yes Yes Yes Yes Yes Yes Yes
One-time programmable (OTP) ROM 1K 1K 1K 1K 1K
(16-bit word)
PWM outputs 0 ePWM1/2/3/4/5/6 ePWM1/2/3/4/5/6 ePWM1/2/3/4/5/6 ePWM1/2/3 ePWM1/2/3 ePWM1/2/3 ePWM1/2/3
ePWM1A/2A/3A/ ePWM1A/2A/ ePWM1A/2A/
HRPWM channels 0 ePWM1A/2A/3A ePWM1A/2A/3A ePWM1A/2A/3A ePWM1A/2A/3A
4A/5A/6A 3A/4A 3A/4A
32-bit CAPTURE inputs or auxiliary PWM outputs 0 eCAP1/2/3/4 eCAP1/2/3/4 eCAP1/2/3/4 eCAP1/2 eCAP1/2 eCAP1/2 eCAP1/2
32-bit QEP channels (four inputs/channel) 0 eQEP1/2 eQEP1/2 eQEP1/2 eQEP1 eQEP1 eQEP1 eQEP1
Watchdog timer Yes Yes Yes Yes Yes Yes Yes
12-Bit, 16-channel ADC conversion time 1 80 ns 160 ns 160 ns 160 ns 160 ns 160 ns 160 ns
32-Bit CPU timers 3 3 3 3 3 3 3
Serial Peripheral Interface (SPI) 0 SPI-A/B/C/D SPI-A/B/C/D SPI-A/B/C/D SPI-A/B SPI-A/B SPI-A/B SPI-A/B
Serial Communications Interface (SCI) 0 SCI-A/B SCI-A/B SCI-A/B SCI-A SCI-A SCI-A SCI-A
Enhanced Controller Area Network (eCAN) 0 eCAN-A/B eCAN-A/B eCAN-A eCAN-A eCAN-A eCAN-A eCAN-A
Inter-Integrated Circuit (I2C) 0 I2C-A I2C-A I2C-A I2C-A I2C-A I2C-A I2C-A
Digital I/O pins (shared) 35 35 35 35 35 35 35
External interrupts 3 3 3 3 3 3 3
Supply voltage 1.8-V Core, 3.3-V I/O Yes Yes Yes Yes Yes Yes Yes
100-Pin PZ Yes Yes Yes Yes Yes Yes Yes
Packaging 100-Ball GGM, ZGM Yes Yes Yes Yes Yes Yes Yes
A: –40°C to 85°C (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM)
Temperature options S: –40°C to 125°C (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM)
Q: –40°C to 125°C (PZ) (PZ) (PZ) (PZ) (PZ) (PZ) (PZ)
Product status(2) TMS TMS TMS TMS TMS TMS TMS
(1) A type change represents a major functional feature difference in a peripheral module. Within a peripheral type, there may be minor differences between devices that do not affect the
basic functionality of the module. These device-specific differences are listed in the TMS320x28xx, 28xxx DSP Peripheral Reference Guide (literature number SPRU566) and in the
peripheral reference guides.
(2) See Section 5.1, Device and Development Support Tool Nomenclature, for descriptions of device stages.
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 11
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 2-2. Hardware Features (60-MHz Devices)
FEATURE TYPE(1) F2802-60 F2801-60 F28016 F28015
Instruction cycle (at 60 MHz) 16.67 ns 16.67 ns 16.67 ns 16.67 ns
6K 6K 6K 6K
Single-access RAM (SARAM) (16-bit word) (L0, M0, M1) (L0, M0, M1) (L0, M0, M1) (L0, M0, M1)
3.3-V on-chip flash (16-bit word) 32K 16K 16K 16K
On-chip ROM (16-bit word)
Code security for on-chip flash/SARAM/OTP blocks Yes Yes Yes Yes
Boot ROM (4K x 16) Yes Yes Yes Yes
One-time programmable (OTP) ROM 1K 1K 1K 1K
(16-bit word)
PWM outputs 0 ePWM1/2/3 ePWM1/2/3 ePWM1/2/3/4 ePWM1/2/3/4
HRPWM channels 0 ePWM1A/2A/3A ePWM1A/2A/3A ePWM1A/2A/3A/4A ePWM1A/2A/3A/4A
32-bit CAPTURE inputs or auxiliary PWM outputs 0 eCAP1/2 eCAP1/2 eCAP1/2 eCAP1/2
32-bit QEP channels (four inputs/channel) 0 eQEP1 eQEP1 - -
Watchdog timer Yes Yes Yes Yes
No. of channels 16 16 16 16
12-Bit ADC MSPS 1 3.75 3.75 3.75 3.75
Conversion time 267 ns 267 ns 267 ns 267 ns
32-Bit CPU timers 3 3 3 3
Serial Peripheral Interface (SPI) 0 SPI-A/B SPI-A/B SPI-A SPI-A
Serial Communications Interface (SCI) 0 SCI-A SCI-A SCI-A SCI-A
Enhanced Controller Area Network (eCAN) 0 eCAN-A eCAN-A eCAN-A -
Inter-Integrated Circuit (I2C) 0 I2C-A I2C-A I2C-A I2C-A
Digital I/O pins (shared) 35 35 35 35
External interrupts 3 3 3 3
1.8-V Core, 1.8-V Core, 1.8-V Core, 1.8-V Core,
Supply voltage 3.3-V I/O 3.3-V I/O 3.3-V I/O 3.3-V I/O
100-Pin PZ Yes Yes Yes Yes
Packaging 100-Ball GGM, ZGM Yes Yes Yes Yes
A: –40°C to 85°C (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM)
Temperature options S: –40°C to 125°C (PZ GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM)
Q: –40°C to 125°C (PZ) (PZ) (PZ) (PZ)
Product status(2) TMS TMS TMS TMS
(1) A type change represents a major functional feature difference in a peripheral module. Within a peripheral type, there may be minor differences between devices that do not affect the
basic functionality of the module. These device-specific differences are listed in the TMS320x28xx, 28xxx DSP Peripheral Reference Guide (literature number SPRU566) and in the
peripheral reference guides.
(2) See Section 5.1, Device and Development Support Tool Nomenclature, for descriptions of device stages.
12 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
76
75
74
51
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
52
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
GPIO0/EPWM1A
XRS
TRST
VDD2A18
VSS2AGND
VDDAIO
GPIO13/ /CANRXB/SPISOMIBTZ2
VDD3VFL
VDD
VDD
VDDIO
VDD
VSS
VSS
VSS
VSS
VSS
VSS
VDDIO
GPIO26/ECAP3/EQEP2I/SPICLKB
TEST2
TEST1
GPIO25/ECAP2/EQEP2B/SPISOMIB
XCLKIN
X1
X2
EMU1
EMU0
GPIO24/ECAP1/EQEP2A/SPISIMOB
GPIO27/ECAP4/EQEP2S/SPISTEB
TDO
TCK
GPIO12/ /CANTXB/SPISIMOBTZ1
GPIO14/ /SCITXDB/SPICLKBTZ3
GPIO15/ /SCIRXDB/SPISTEBTZ4
GPIO30/CANRXA
ADCINA3
ADCINA7
ADCINA6
ADCINA5
ADCINA4
ADCINA2
ADCINA1
ADCINA0
ADCLO
GPIO31/CANTXA
GPIO29/SCITXDA//TZ6
GPIO33/SCLA/EPWMSYNCO/ADCSOCBO
GPIO4/EPWM3A
GPIO17/SPISOMIA/CANRXB/TZ6
GPIO5/EPWM3B/SPICLKD/ECAP1
GPIO18/SPICLKA/SCITXDB
GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO
GPIO19/SPISTEA/SCIRXDB
GPIO7/EPWM4B/SPISTED/ECAP2
GPIO9/EPWM5B/SCITXDB/ECAP3
GPIO20/EQEP1A/SPISIMOC/CANTXB
GPIO10/EPWM6A/CANRXB/ADCSOCBO
GPIO8/EPWM5A/CANTXB/ADCSOCAO
XCLKOUT
GPIO21/EQEP1B/SPISOMIC/CANRXB
VSS
VSS
VSS
VSS
VSS
VSS1AGND
VSSA2
VSSAIO
VDD
VDDA2
VDD1A18
VDDIO
VDD
VDD
VDDIO
GPIO11/EPWM6B/SCIRXDB/ECAP4
GPIO22/EQEP1S/SPICLKC/SCITXDB
TMS
TDI
GPIO23/EQEP1I/SPISTEC/SCIRXDB
ADCINB0
ADCINB1
ADCINB2
ADCINB3
ADCINB7
ADCINB6
ADCINB5
ADCINB4
ADCREFIN
ADCREFM
ADCREFP
ADCRESEXT
GPIO34
GPIO1/EPWM1B/SPISIMOD
GPIO2/EPWM2A
GPIO3/EPWM2B/SPISOMID
GPIO16/SPISIMOA/CANTXB/TZ5
GPIO32/SDAA/EPWMSYNCI/ADCSOCAO
GPIO28/SCIRXDA/TZ5
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
2.1 Pin Assignments
The TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320C2802,
TMS320C2801, TMS320F28015, and TMS320F28016 100-pin PZ low-profile quad flatpack (LQFP) pin
assignments are shown in Figure 2-1,Figure 2-2,Figure 2-3, and Figure 2-4. The 100-ball GGM and ZGM
ball grid array (BGA) terminal assignments are shown in Figure 2-5.Table 2-3 describes the function(s) of
each pin.
Figure 2-1. TMS320F2809, TMS320F2808 100-Pin PZ LQFP (Top View)
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 13
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
76
75
74
51
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
52
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
GPIO0/EPWM1A
XRS
TRST
VDD2A18
VSS2AGND
VDDAIO
GPIO13/ /SPISOMIBTZ2
VDD3VFL
VDD
VDD
VDDIO
VDD
VSS
VSS
VSS
VSS
VSS
VSS
VDDIO
GPIO26/ECAP3/EQEP2I/SPICLKB
TEST2
TEST1
GPIO25/ECAP2/EQEP2B/SPISOMIB
XCLKIN
X1
X2
EMU1
EMU0
GPIO24/ECAP1/EQEP2A/SPISIMOB
GPIO27/ECAP4/EQEP2S/SPISTEB
TDO
TCK
GPIO12/ /SPISIMOBTZ1
GPIO14/ /SCITXDB/SPICLKBTZ3
GPIO15/ /SCIRXDB/SPISTEBTZ4
GPIO30/CANRXA
ADCINA3
ADCINA7
ADCINA6
ADCINA5
ADCINA4
ADCINA2
ADCINA1
ADCINA0
ADCLO
GPIO31/CANTXA
GPIO29/SCITXDA//TZ6
GPIO33/SCLA/EPWMSYNCO/ADCSOCBO
GPIO4/EPWM3A
GPIO17/SPISOMIA/TZ6
GPIO5/EPWM3B/SPICLKD/ECAP1
GPIO18/SPICLKA/SCITXDB
GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO
GPIO19/SPISTEA/SCIRXDB
GPIO7/EPWM4B/SPISTED/ECAP2
GPIO9/EPWM5B/SCITXDB/ECAP3
GPIO20/EQEP1A/SPISIMOC
GPIO10/EPWM6A/ADCSOCBO
GPIO8/EPWM5A/ADCSOCAO
XCLKOUT
GPIO21/EQEP1B/SPISOMIC
VSS
VSS
VSS
VSS
VSS
VSS1AGND
VSSA2
VSSAIO
VDD
VDDA2
VDD1A18
VDDIO
VDD
VDD
VDDIO
GPIO11/EPWM6B/SCIRXDB/ECAP4
GPIO22/EQEP1S/SPICLKC/SCITXDB
TMS
TDI
GPIO23/EQEP1I/SPISTEC/SCIRXDB
ADCINB0
ADCINB1
ADCINB2
ADCINB3
ADCINB7
ADCINB6
ADCINB5
ADCINB4
ADCREFIN
ADCREFM
ADCREFP
ADCRESEXT
GPIO34
GPIO1/EPWM1B/SPISIMOD
GPIO2/EPWM2A
GPIO3/EPWM2B/SPISOMID
GPIO16/SPISIMOA/TZ5
GPIO32/SDAA/EPWMSYNCI/ADCSOCAO
GPIO28/SCIRXDA/TZ5
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 2-2. TMS320F2806 100-Pin PZ LQFP (Top View)
14 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
76
75
74
51
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
52
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
GPIO0/EPWM1A
XRS
TRST
VDD2A18
VSS2AGND
VDDAIO
SPISOMIB/GPIO13/TZ2
VDD3VFL
(A)
VDD
VDD
VDDIO
VDD
VSS
VSS
VSS
VSS
VSS
VSS
VDDIO
SPICLKB/GPIO26
TEST2
TEST1
GPIO25/ECAP2/SPISOMIB
XCLKIN
X1
X2
EMU1
EMU0
SPISIMOB/GPIO24/ECAP1
SPISTEB/GPIO27
TDO
TCK
SPISIMOB/GPIO12/TZ1
SPICLKB/GPIO14/TZ3
SPISTEB/GPIO15/TZ4
GPIO30/CANRXA
ADCINA3
ADCINA7
ADCINA6
ADCINA5
ADCINA4
ADCINA2
ADCINA1
ADCINA0
ADCLO
GPIO31/CANTXA
GPIO29/SCITXDA//TZ6
GPIO33/SCLA/EPWMSYNCO/ADCSOCBO
GPIO4/EPWM3A
GPIO17/SPISOMIA/TZ6
GPIO5/EPWM3B/ECAP1
GPIO18/SPICLKA
GPIO6/EPWMSYNCI/EPWMSYNCO
GPIO19/SPISTEA
GPIO7/ECAP2
GPIO9
GPIO20/EQEP1A
GPIO10/ADCSOCBO
GPIO8/ADCSOCAO
XCLKOUT
GPIO21/EQEP1B
VSS
VSS
VSS
VSS
VSS
VSS1AGND
VSSA2
VSSAIO
VDD
VDDA2
VDD1A18
VDDIO
VDD
VDD
VDDIO
GPIO11
GPIO22/EQEP1S
TMS
TDI
GPIO23/EQEP1I
ADCINB0
ADCINB1
ADCINB2
ADCINB3
ADCINB7
ADCINB6
ADCINB5
ADCINB4
ADCREFIN
ADCREFM
ADCREFP
ADCRESEXT
GPIO34
GPIO1/EPWM1B
GPIO2/EPWM2A
GPIO3/EPWM2B
GPIO16/SPISIMOA/TZ5
GPIO32/SDAA/EPWMSYNCI/ADCSOCAO
GPIO28/SCIRXDA/TZ5
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
A. On the C280x devices, the VDD3VFL pin is VDDIO.
Figure 2-3. TMS320F2802, TMS320F2801, TMS320C2802, TMS320C2801 100-Pin PZ LQFP (Top View)
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 15
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
76
75
74
51
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
52
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
GPIO0/EPWM1A
XRS
TRST
VDD2A18
VSS2AGND
VDDAIO
GPIO13/TZ2
VDD3VFL
VDD
VDD
VDDIO
VDD
VSS
VSS
VSS
VSS
VSS
VSS
VDDIO
GPIO26
TEST2
TEST1
GPIO25/ECAP2
XCLKIN
X1
X2
EMU1
EMU0
GPIO24/ECAP1
GPIO27
TDO
TCK
GPIO12/TZ1
GPIO14/TZ3
GPIO15/TZ4
GPIO30/CANRXA(A)
ADCINA3
ADCINA7
ADCINA6
ADCINA5
ADCINA4
ADCINA2
ADCINA1
ADCINA0
ADCLO
GPIO31/CANTXA(A)
GPIO29/SCITXDA//TZ6
GPIO33/SCLA/EPWMSYNCO/ADCSOCBO
GPIO4/EPWM3A
GPIO17/SPISOMIA/TZ6
GPIO5/EPWM3B/ECAP1
GPIO18/SPICLKA
GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO
GPIO19/SPISTEA
GPIO7/EPWM4B/ECAP2
GPIO9
GPIO20
GPIO10/ADCSOCBO
GPIO8/ADCSOCAO
XCLKOUT
GPIO21
VSS
VSS
VSS
VSS
VSS
VSS1AGND
VSSA2
VSSAIO
VDD
VDDA2
VDD1A18
VDDIO
VDD
VDD
VDDIO
GPIO11
GPIO22
TMS
TDI
GPIO23
ADCINB0
ADCINB1
ADCINB2
ADCINB3
ADCINB7
ADCINB6
ADCINB5
ADCINB4
ADCREFIN
ADCREFM
ADCREFP
ADCRESEXT
GPIO34
GPIO1/EPWM1B
GPIO2/EPWM2A
GPIO3/EPWM2B
GPIO16/SPISIMOA/TZ5
GPIO32/SDAA/EPWMSYNCI/ADCSOCAO
GPIO28/SCIRXDA/TZ5
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. CANTXA (pin 7) and CANRXA (pin 6) pins are not applicable for the TMS320F28015.
Figure 2-4. TMS320F2801x 100-Pin PZ LQFP (Top View)
16 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
4
C
B
A
D
E
21 3
K
F
G
H
J
57
698 10
Bottom View
TRST TCK
TDI
TDO TMS
EMU0
EMU1
VDD3VFL
TEST1
TEST2
XCLKOUT
XCLKIN
X1
X2
XRS
GPIO0GPIO1
GPIO2 GPIO3 GPIO4
GPIO5
GPIO6GPIO7
GPIO9 GPIO8
GPIO10
GPIO11
GPIO12 GPIO13
GPIO14
GPIO15
GPIO16
GPIO17
GPIO18
GPIO19
GPIO20
GPIO21
GPIO22
GPIO23GPIO24GPIO25
GPIO26
GPIO27
GPIO28
GPIO29
GPIO30GPIO31
GPIO32
GPIO33
GPIO34
VDDA2
VDD1A18 VSS1AGND
VSSAIO
VDDAIO
VSSA2 ADCINA7
VSS2AGND
VDD2A18
VDD
VDD
VDD
VDD
VDD
VDD
VDDIO
VDDIO
VDDIO
VDDIO
VSS VSS
VSS
VSS
VSS VSS
VSS
VSS VSS
VSS
VSS
ADCINB2
ADCINA6
ADCINA5ADCINA4 ADCINA3 ADCINA2
ADCINA1 ADCINA0
ADCINB7
ADCINB1
ADCINB0
ADCLO
ADCRESEXT
ADCREFIN
ADCREFP
ADCREFM
ADCINB3 ADCINB5
ADCINB4
ADCINB6
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 2-5. TMS320F2809, TMS320F2808, TMS320F2806,TMS320F2802, TMS320F2801,
TMS320F28016, TMS320F28015, TMS320C2802, TMS320C2801
100-Ball GGM and ZGM MicroStar BGA™ (Bottom View)
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 17
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
2.2 Signal Descriptions
Table 2-3 describes the signals on the 280x devices. All digital inputs are TTL-compatible. All outputs are
3.3 V with CMOS levels. Inputs are not 5-V tolerant.
Table 2-3. Signal Descriptions
PIN NO.
GGM/
NAME DESCRIPTION (1)
PZ ZGM
PIN # BALL #
JTAG
JTAG test reset with internal pulldown. TRST, when driven high, gives the scan system control of
the operations of the device. If this signal is not connected or driven low, the device operates in its
functional mode, and the test reset signals are ignored.
NOTE: Do not use pullup resistors on TRST; it has an internal pull-down device. TRST is an active
TRST 84 A6 high test pin and must be maintained low at all times during normal device operation. An external
pulldown resistor is required on this pin. The value of this resistor should be based on drive strength
of the debugger pods applicable to the design. A 2.2-kresistor generally offers adequate
protection. Since this is application-specific, it is recommended that each target board be validated
for proper operation of the debugger and the application. (I, )
TCK 75 A10 JTAG test clock with internal pullup (I, )
JTAG test-mode select (TMS) with internal pullup. This serial control input is clocked into the TAP
TMS 74 B10 controller on the rising edge of TCK. (I, )
JTAG test data input (TDI) with internal pullup. TDI is clocked into the selected register (instruction
TDI 73 C9 or data) on a rising edge of TCK. (I, )
JTAG scan out, test data output (TDO). The contents of the selected register (instruction or data)
TDO 76 B9 are shifted out of TDO on the falling edge of TCK. (O/Z 8 mA drive)
Emulator pin 0. When TRST is driven high, this pin is used as an interrupt to or from the emulator
system and is defined as input/output through the JTAG scan. This pin is also used to put the
device into boundary-scan mode. With the EMU0 pin at a logic-high state and the EMU1 pin at a
logic-low state, a rising edge on the TRST pin would latch the device into boundary-scan mode.
EMU0 80 A8 (I/O/Z, 8 mA drive )
NOTE: An external pullup resistor is recommended on this pin. The value of this resistor should be
based on the drive strength of the debugger pods applicable to the design. A 2.2-kto 4.7-k
resistor is generally adequate. Since this is application-specific, it is recommended that each target
board be validated for proper operation of the debugger and the application.
Emulator pin 1. When TRST is driven high, this pin is used as an interrupt to or from the emulator
system and is defined as input/output through the JTAG scan. This pin is also used to put the
device into boundary-scan mode. With the EMU0 pin at a logic-high state and the EMU1 pin at a
logic-low state, a rising edge on the TRST pin would latch the device into boundary-scan mode.
EMU1 81 B7 (I/O/Z, 8 mA drive )
NOTE: An external pullup resistor is recommended on this pin. The value of this resistor should be
based on the drive strength of the debugger pods applicable to the design. A 2.2-kto 4.7-k
resistor is generally adequate. Since this is application-specific, it is recommended that each target
board be validated for proper operation of the debugger and the application.
FLASH
3.3-V Flash Core Power Pin. This pin should be connected to 3.3 V at all times. On the ROM
VDD3VFL 96 C4 parts (C280x), this pin should be connected to VDDIO.
TEST1 97 A3 Test Pin. Reserved for TI. Must be left unconnected. (I/O)
TEST2 98 B3 Test Pin. Reserved for TI. Must be left unconnected. (I/O)
CLOCK
Output clock derived from SYSCLKOUT. XCLKOUT is either the same frequency, one-half the
frequency, or one-fourth the frequency of SYSCLKOUT. This is controlled by the bits 1, 0
XCLKOUT 66 E8 (XCLKOUTDIV) in the XCLK register. At reset, XCLKOUT = SYSCLKOUT/4. The XCLKOUT signal
can be turned off by setting XCLKOUTDIV to 3. Unlike other GPIO pins, the XCLKOUT pin is not
placed in high-impedance state during a reset. (O/Z, 8 mA drive).
External Oscillator Input. This pin is used to feed a clock from an external 3.3-V oscillator. In this
XCLKIN 90 B5 case, tie the X1 pin to GND. Alternately, when a crystal/resonator is used (or if an external 1.8-V
oscillator is fed into the X1 pin), tie the XCLKIN pin to GND. (I)
(1) I = Input, O = Output, Z = High impedance, OD = Open drain, = Pullup, = Pulldown
18 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 2-3. Signal Descriptions (continued)
PIN NO.
GGM/
NAME DESCRIPTION (1)
PZ ZGM
PIN # BALL #
Internal/External Oscillator Input. To use the internal oscillator, a quartz crystal or a ceramic
resonator may be connected across X1 and X2. The X1 pin is referenced to the 1.8-V core digital
X1 88 E6 power supply. A 1.8-V external oscillator may be connected to the X1 pin. In this case, the XCLKIN
pin must be connected to ground. If a 3.3-V external oscillator is used with the XCLKIN pin, X1 must
be tied to GND. (I)
Internal Oscillator Output. A quartz crystal or a ceramic resonator may be connected across X1 and
X2 86 C6 X2. If X2 is not used it must be left unconnected. (O)
RESET
Device Reset (in) and Watchdog Reset (out).
Device reset. XRS causes the device to terminate execution. The PC will point to the address
contained at the location 0x3FFFC0. When XRS is brought to a high level, execution begins at the
location pointed to by the PC. This pin is driven low by the DSP when a watchdog reset occurs.
XRS 78 B8 During watchdog reset, the XRS pin is driven low for the watchdog reset duration of 512 OSCCLK
cycles. (I/OD, )
The output buffer of this pin is an open-drain with an internal pullup. It is recommended that this pin
be driven by an open-drain device.
ADC SIGNALS
ADCINA7 16 F3 ADC Group A, Channel 7 input (I)
ADCINA6 17 F4 ADC Group A, Channel 6 input (I)
ADCINA5 18 G4 ADC Group A, Channel 5 input (I)
ADCINA4 19 G1 ADC Group A, Channel 4 input (I)
ADCINA3 20 G2 ADC Group A, Channel 3 input (I)
ADCINA2 21 G3 ADC Group A, Channel 2 input (I)
ADCINA1 22 H1 ADC Group A, Channel 1 input (I)
ADCINA0 23 H2 ADC Group A, Channel 0 input (I)
ADCINB7 34 K5 ADC Group B, Channel 7 input (I)
ADCINB6 33 H4 ADC Group B, Channel 6 input (I)
ADCINB5 32 K4 ADC Group B, Channel 5 input (I)
ADCINB4 31 J4 ADC Group B, Channel 4 input (I)
ADCINB3 30 K3 ADC Group B, Channel 3 input (I)
ADCINB2 29 H3 ADC Group B, Channel 2 input (I)
ADCINB1 28 J3 ADC Group B, Channel 1 input (I)
ADCINB0 27 K2 ADC Group B, Channel 0 input (I)
ADCLO 24 J1 Low Reference (connect to analog ground) (I)
ADCRESEXT 38 F5 ADC External Current Bias Resistor. Connect a 22-kresistor to analog ground.
ADCREFIN 35 J5 External reference input (I)
Internal Reference Positive Output. Requires a low ESR (under 1.5 ) ceramic bypass capacitor of
2.2 μF to analog ground. (O)
ADCREFP 37 G5 NOTE: Use the ADC Clock rate to derive the ESR specification from the capacitor data sheet that is
used in the system.
Internal Reference Medium Output. Requires a low ESR (under 1.5 ) ceramic bypass capacitor of
2.2 μF to analog ground. (O)
ADCREFM 36 H5 NOTE: Use the ADC Clock rate to derive the ESR specification from the capacitor data sheet that is
used in the system.
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 19
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 2-3. Signal Descriptions (continued)
PIN NO.
GGM/
NAME DESCRIPTION (1)
PZ ZGM
PIN # BALL #
CPU AND I/O POWER PINS
VDDA2 15 F2 ADC Analog Power Pin (3.3 V)
VSSA2 14 F1 ADC Analog Ground Pin
VDDAIO 26 J2 ADC Analog I/O Power Pin (3.3 V)
VSSAIO 25 K1 ADC Analog I/O Ground Pin
VDD1A18 12 E4 ADC Analog Power Pin (1.8 V)
VSS1AGND 13 E5 ADC Analog Ground Pin
VDD2A18 40 J6 ADC Analog Power Pin (1.8 V)
VSS2AGND 39 K6 ADC Analog Ground Pin
VDD 10 E2
VDD 42 G6
VDD 59 F10 CPU and Logic Digital Power Pins (1.8 V)
VDD 68 D7
VDD 85 B6
VDD 93 D4
VDDIO 3 C2
VDDIO 46 H7 Digital I/O Power Pin (3.3 V)
VDDIO 65 E9
VDDIO 82 A7
VSS 2 B1
VSS 11 E3
VSS 41 H6
VSS 49 K9
VSS 55 H10
VSS 62 F7 Digital Ground Pins
VSS 69 D10
VSS 77 A9
VSS 87 D6
VSS 89 A5
VSS 94 A4
GPIOA AND PERIPHERAL SIGNALS(1) (2)
GPIO0 General-purpose input/output 0 (I/O/Z) (3)
EPWM1A Enhanced PWM1 Output A and HRPWM channel (O)
47 K8
- -
- -
GPIO1 General-purpose input/output 1 (I/O/Z)(3)
EPWM1B Enhanced PWM1 Output B (O)
44 K7
SPISIMOD SPI-D slave in, master out (I/O) (not available on 2801, 2802)
- -
GPIO2 General-purpose input/output 2 (I/O/Z)(3)
EPWM2A Enhanced PWM2 Output A and HRPWM channel (O)
45 J7
- -
- -
(1) Some peripheral functions may not be available in TMS320F2801x devices. See Table 2-2 for details.
(2) All GPIO pins are I/O/Z, 4-mA drive typical (unless otherwise indicated), and have an internal pullup, which can be selectively
enabled/disabled on a per-pin basis. This feature only applies to the GPIO pins. The GPIO function (shown in Italics) is the default at
reset. The peripheral signals that are listed under them are alternate functions.
(3) The pullups on GPIO0-GPIO11 pins are not enabled at reset.
20 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 2-3. Signal Descriptions (continued)
PIN NO.
GGM/
NAME DESCRIPTION (1)
PZ ZGM
PIN # BALL #
GPIO3 General-purpose input/output 3 (I/O/Z)(1)
EPWM2B Enhanced PWM2 Output B (O)
48 J8
SPISOMID SPI-D slave out, master in (I/O) (not available on 2801, 2802)
- -
GPIO4 General-purpose input/output 4 (I/O/Z)(1)
EPWM3A Enhanced PWM3 output A and HRPWM channel (O)
51 J9
- -
- -
GPIO5 General-purpose input/output 5 (I/O/Z)(1)
EPWM3B Enhanced PWM3 output B (O)
53 H9
SPICLKD SPI-D clock (I/O) (not available on 2801, 2802)
ECAP1 Enhanced capture input/output 1 (I/O)
GPIO6 General-purpose input/output 6 (I/O/Z)(1)
EPWM4A Enhanced PWM4 output A and HRPWM channel (O) (not available on 2801, 2802)
56 G9
EPWMSYNCI External ePWM sync pulse input (I)
EPWMSYNCO External ePWM sync pulse output (O)
GPIO7 General-purpose input/output 7 (I/O/Z)(1)
EPWM4B Enhanced PWM4 output B (O) (not available on 2801, 2802)
58 G8
SPISTED SPI-D slave transmit enable (I/O) (not available on 2801, 2802)
ECAP2 Enhanced capture input/output 2 (I/O)
GPIO8 General-purpose input/output 8 (I/O/Z)(1)
EPWM5A Enhanced PWM5 output A and HRPWM channel (O) (not available on 2801, 2802)
60 F9
CANTXB Enhanced CAN-B transmit (O) (not available on 2801, 2802, F2806)
ADCSOCAO ADC start-of-conversion A (O)
GPIO9 General-purpose input/output 9 (I/O/Z)(1)
EPWM5B Enhanced PWM5 output B (O) (not available on 2801, 2802)
61 F8
SCITXDB SCI-B transmit data (O) (not available on 2801, 2802)
ECAP3 Enhanced capture input/output 3 (I/O) (not available on 2801, 2802)
GPIO10 General-purpose input/output 10 (I/O/Z)(1)
EPWM6A Enhanced PWM6 output A and HRPWM channel (O) (not available on 2801, 2802)
64 E10
CANRXB Enhanced CAN-B receive (I) (not available on 2801, 2802, F2806)
ADCSOCBO ADC start-of-conversion B (O)
GPIO11 General-purpose input/output 11 (I/O/Z)(1)
EPWM6B Enhanced PWM6 output B (O) (not available on 2801, 2802)
70 D9
SCIRXDB SCI-B receive data (I) (not available on 2801, 2802)
ECAP4 Enhanced CAP Input/Output 4 (I/O) (not available on 2801, 2802)
GPIO12 General-purpose input/output 12 (I/O/Z)(2)
TZ1 Trip Zone input 1 (I)
1 B2
CANTXB Enhanced CAN-B transmit (O) (not available on 2801, 2802, F2806)
SPISIMOB SPI-B Slave in, Master out (I/O)
GPIO13 General-purpose input/output 13 (I/O/Z)(2)
TZ2 Trip zone input 2 (I)
95 B4
CANRXB Enhanced CAN-B receive (I) (not available on 2801, 2802, F2806)
SPISOMIB SPI-B slave out, master in (I/O)
GPIO14 General-purpose input/output 14 (I/O/Z)(2)
TZ3 Trip zone input 3 (I)
8 D3
SCITXDB SCI-B transmit (O) (not available on 2801, 2802)
SPICLKB SPI-B clock input/output (I/O)
GPIO15 General-purpose input/output 15 (I/O/Z)(2)
TZ4 Trip zone input 4 (I)
9 E1
SCIRXDB SCI-B receive (I) (not available on 2801, 2802)
SPISTEB SPI-B slave transmit enable (I/O)
GPIO16 General-purpose input/output 16 (I/O/Z)(2)
SPISIMOA SPI-A slave in, master out (I/O)
50 K10
CANTXB Enhanced CAN-B transmit (O) (not available on 2801, 2802, F2806)
TZ5 Trip zone input 5 (I)
(1) The pullups on GPIO0-GPIO11 pins are not enabled at reset.
(2) The pullups on GPIO12-GPIO34 are enabled upon reset.
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 21
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 2-3. Signal Descriptions (continued)
PIN NO.
GGM/
NAME DESCRIPTION (1)
PZ ZGM
PIN # BALL #
GPIO17 General-purpose input/output 17 (I/O/Z)(1)
SPISOMIA SPI-A slave out, master in (I/O)
52 J10
CANRXB Enhanced CAN-B receive (I) (not available on 2801, 2802, F2806)
TZ6 Trip zone input 6 (I)
GPIO18 General-purpose input/output 18 (I/O/Z)(1)
SPICLKA SPI-A clock input/output (I/O)
SCITXDB 54 H8 SCI-B transmit (O) (not available on 2801, 2802)
- -
- -
GPIO19 General-purpose input/output 19 (I/O/Z)(1)
SPISTEA SPI-A slave transmit enable input/output (I/O)
SCIRXDB 57 G10 SCI-B receive (I) (not available on 2801, 2802)
- -
- -
GPIO20 General-purpose input/output 20 (I/O/Z)(1)
EQEP1A Enhanced QEP1 input A (I)
63 F6
SPISIMOC SPI-C slave in, master out (I/O) (not available on 2801, 2802)
CANTXB Enhanced CAN-B transmit (O) (not available on 2801, 2802, F2806)
GPIO21 General-purpose input/output 21 (I/O/Z)(1)
EQEP1B Enhanced QEP1 input A (I)
67 E7
SPISOMIC SPI-C master in, slave out (I/O) (not available on 2801, 2802)
CANRXB Enhanced CAN-B receive (I) (not available on 2801, 2802, F2806)
GPIO22 General-purpose input/output 22 (I/O/Z)(1)
EQEP1S Enhanced QEP1 strobe (I/O)
71 D8
SPICLKC SPI-C clock (I/O) (not available on 2801, 2802)
SCITXDB SCI-B transmit (O) (not available on 2801, 2802)
GPIO23 General-purpose input/output 23 (I/O/Z)(1)
EQEP1I Enhanced QEP1 index (I/O)
72 C10
SPISTEC SPI-C slave transmit enable (I/O) (not available on 2801, 2802)
SCIRXDB SCI-B receive (I) (not available on 2801, 2802)
GPIO24 General-purpose input/output 24 (I/O/Z)(1)
ECAP1 Enhanced capture 1 (I/O)
83 C7
EQEP2A Enhanced QEP2 input A (I) (not available on 2801, 2802)
SPISIMOB SPI-B slave in, master out (I/O)
GPIO25 General-purpose input/output 25 (I/O/Z)(1)
ECAP2 Enhanced capture 2 (I/O)
91 C5
EQEP2B Enhanced QEP2 input B (I) (not available on 2801, 2802)
SPISOMIB SPI-B master in, slave out (I/O)
GPIO26 General-purpose input/output 26 (I/O/Z)(1)
ECAP3 Enhanced capture 3 (I/O) (not available on 2801, 2802)
99 A2
EQEP2I Enhanced QEP2 index (I/O) (not available on 2801, 2802)
SPICLKB SPI-B clock (I/O)
GPIO27 General-purpose input/output 27 (I/O/Z)(1)
ECAP4 Enhanced capture 4 (I/O) (not available on 2801, 2802)
79 C8
EQEP2S Enhanced QEP2 strobe (I/O) (not available on 2801, 2802)
SPISTEB SPI-B slave transmit enable (I/O)
GPIO28 General-purpose input/output 28. This pin has an 8-mA (typical) output buffer. (I/O/Z)(1)
SCIRXDA SCI receive data (I)
92 D5
- -
TZ5 Trip zone input 5 (I)
GPIO29 General-purpose input/output 29. This pin has an 8-mA (typical) output buffer. (I/O/Z)(1)
SCITXDA SCI transmit data (O)
4 C3
- -
TZ6 Trip zone 6 input (I)
(1) The pullups on GPIO12-GPIO34 are enabled upon reset.
22 Introduction Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 2-3. Signal Descriptions (continued)
PIN NO.
GGM/
NAME DESCRIPTION (1)
PZ ZGM
PIN # BALL #
GPIO30 General-purpose input/output 30. This pin has an 8-mA (typical) output buffer. (I/O/Z)(1)
CANRXA Enhanced CAN-A receive data (I)
6 D2
- -
- -
GPIO31 General-purpose input/output 31. This pin has an 8-mA (typical) output buffer. (I/O/Z)(1)
CANTXA Enhanced CAN-A transmit data (O)
7 D1
- -
- -
GPIO32 General-purpose input/output 32 (I/O/Z)(1)
SDAA I2C data open-drain bidirectional port (I/OD)
100 A1
EPWMSYNCI Enhanced PWM external sync pulse input (I)
ADCSOCAO ADC start-of-conversion (O)
GPIO33 General-Purpose Input/Output 33 (I/O/Z)(1)
SCLA I2C clock open-drain bidirectional port (I/OD)
5 C1
EPWMSYNCO Enhanced PWM external synch pulse output (O)
ADCSOCBO ADC start-of-conversion (O)
GPIO34 General-Purpose Input/Output 34 (I/O/Z)(1)
- -
43 G7
- -
- -
(1) The pullups on GPIO12-GPIO34 are enabled upon reset.
NOTE
Some peripheral functions may not be available in TMS320F2801x devices. See Table 2-2
for details.
Copyright © 2003–2012, Texas Instruments Incorporated Introduction 23
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
INT[12:1]
Real-Time JTAG
(TDI, TDO, , TCK,
TMS, EMU0, EMU1)
TRST
C28x CPU
(100 MHz)
NMI, INT13
Memory Bus
INT14
SYSCLKOUT
RS
CLKIN
12-Bit ADC
ADCSOCA/B
SOCA/B
16 Channels
12
6
32
XCLKOUT
XRS
XCLKIN
X1
X2
32
System Control
(Oscillator, PLL,
Peripheral Clocking,
Low-Power Modes,
Watchdog)
ePWM1/2/3/4/5/6
(12 PWM Outputs,
6 Trip Zones,
6 16-bit Timers)
eCAP1/2/3/4
(4 32-bit Timers)
eQEP1/2
eCAN-A/B (32 mbox)
External Interrupt
Control
PIE
(96 Interrupts)(A)
FIFO
FIFO
FIFO
SCI-A/B
GPIO MUX
I2C-A
SPI-A/B/C/D
4
8
4
2
16
4
GPIOs
(35)
TINT0
TINT1
TINT2
7
Peripheral Bus
M0 SARAM
1K x 16
M1 SARAM
1K x 16
Boot ROM
4K x 16
(1-wait state)
L0 SARAM
4K x 16
(0-wait)
L1 SARAM
4K x 16
(0-wait)
(B)
H0 SARAM
8K x 16
(0-wait)
(C)
ROM
32K x 16 (C2802)
16K x 16 (C2801)
FLASH
128K x 16 (F2809)
64K x 16 (F2808)
32K x 16 (F2806)
32K x 16 (F2802)
16K x 16 (F2801)
16K x 16 (F2801x)
OTP
1K x 16
(D)
Protected by the code-security module.
32-bit CPU TIMER 0
32-bit CPU TIMER 1
32-bit CPU TIMER 2
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
3 Functional Overview
A. 43 of the possible 96 interrupts are used on the devices.
B. Not available in F2802, F2801, C2802, and C2801.
C. Not available in F2806, F2802, F2801, C2802, and C2801.
D. The 1K x 16 OTP has been replaced with 1K x 16 ROM for C280x devices.
Figure 3-1. Functional Block Diagram
24 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
0x00 0000
Block Start
Address Data Space Prog Space
M0 Vector − RAM (32 x 32)
(Enabled if VMAP = 0)
M1 SARAM (1K y 16)
0x00 0400
Peripheral Frame 0
0x00 0800
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
0x00 0D00
Peripheral Frame 1
(protected)
0x00 6000
Peripheral Frame 2
(protected)
0x00 7000
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x00 8000
L1 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x00 9000
H0 SARAM (0-wait)
(8K y 16, Dual-Mapped)
0x00 A000
0x00 C000
OTP
(1K y 16, Secure Zone)
0x3D 7800
0x3D 7C00
FLASH
(128K y 16, Secure Zone)
0x3D 8000
0x3F 7FF8 128-bit Password
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x3F 8000
L1 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x3F 9000
H0 SARAM (0-wait)
(8K y 16, Dual-Mapped)
0x3F A000
0x3F F000
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
Boot ROM (4K y 16)
Vectors (32 y 32)
(enabled if VMAP = 1, ENPIE = 0)
0x3F FFC0
Low 64K [0000 − FFFF]
(24x/240x equivalent data space)
High 64K [3F0000 − 3FFFFF]
(24x/240x equivalent program space)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
PIE Vector − RAM
(256 x 16)
(Enabled if ENPIE = 1)
0x00 0E00
0x3F C000
Reserved
Reserved
Reserved
Reserved
Reserved
M0 SARAM (1K y 16)
0x00 0040
Reserved
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
3.1 Memory Maps
A. Memory blocks are not to scale.
B. Peripheral Frame 0, Peripheral Frame 1, and Peripheral Frame 2 memory maps are restricted to data memory only.
User program cannot access these memory maps in program space.
C. Protected means the order of Write followed by Read operations is preserved rather than the pipeline order.
D. Certain memory ranges are EALLOW protected against spurious writes after configuration.
Figure 3-2. F2809 Memory Map
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 25
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
0x00 0000
Block Start
Address Data Space Prog Space
M0 SARAM (1K y 16)
M1 SARAM (1K y 16)
0x00 0400
Peripheral Frame 0
0x00 0800
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
0x00 0D00
Peripheral Frame 1
(protected)
0x00 6000
Peripheral Frame 2
(protected)
0x00 7000
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x00 8000
L1 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x00 9000
H0 SARAM (0-wait)
(8K y 16, Dual-Mapped)
0x00 A000
0x00 C000
OTP
(1K y 16, Secure Zone)
0x3D 7800
0x3D 7C00
FLASH
(64K y 16, Secure Zone)
0x3E 8000
0x3F 7FF8 128-bit Password
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x3F 8000
L1 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
0x3F 9000
H0 SARAM (0-wait)
(8K y 16, Dual-Mapped)
0x3F A000
0x3F F000
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
Boot ROM (4K y 16)
Vectors (32 y 32)
(enabled if VMAP = 1, ENPIE = 0)
0x3F FFC0
Low 64K [0000 − FFFF]
(24x/240x equivalent data space)
High 64K [3F0000 − 3FFFFF]
(24x/240x equivalent program space)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
PIE Vector − RAM
(256 x 16)
(Enabled if ENPIE = 1)
0x00 0E00
0x3F C000
M0 Vector − RAM (32 x 32)
(Enabled if VMAP = 0)
0x00 0040
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. Memory blocks are not to scale.
B. Peripheral Frame 0, Peripheral Frame 1, and Peripheral Frame 2 memory maps are restricted to data memory only.
User program cannot access these memory maps in program space.
C. Protected means the order of Write followed by Read operations is preserved rather than the pipeline order.
D. Certain memory ranges are EALLOW protected against spurious writes after configuration.
Figure 3-3. F2808 Memory Map
26 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
0x00 0000
Block Start
Address Data Space
0x00 0400
0x00 0800
0x00 0D00
0x00 6000
0x00 7000
0x00 8000
0x00 9000
0x00 A000
0x3D 7800
0x3D 7C00
0x3F 7FF8
0x3F 8000
0x3F 9000
0x3F A000
0x3F F000
0x3F FFC0
OTP
(1K y 16, Secure Zone)
FLASH
(32K y 16, Secure Zone)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
Boot ROM (4K y 16)
Low 64K [0000−FFFF]
(24x/240x equivalent data space)
High 64K [3F0000 −3FFFF]
(24x/240x equivalent program space)
M1 SARAM (1K y 16)
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
L1 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
L1 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
128-bit Password
0x3F 0000
Prog Space
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
Peripheral Frame 0
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
ÉÉÉÉÉÉ
Peripheral Frame 1
(protected)
Peripheral Frame 2
(protected)
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
PIE Vector − RAM
(256 x 16)
(Enabled if ENPIE = 1)
Vectors (32 y 32)
(enabled if VMAP = 1, ENPIE = 0)
0x00 0E00
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
M0 SARAM (1K y 16)
M0 Vector − RAM (32 x 32)
(Enabled if VMAP = 0)
0x00 0040
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
A. Memory blocks are not to scale.
B. Peripheral Frame 0, Peripheral Frame 1, and Peripheral Frame 2 memory maps are restricted to data memory only.
User program cannot access these memory maps in program space.
C. Protected means the order of Write followed by Read operations is preserved rather than the pipeline order.
D. Certain memory ranges are EALLOW protected against spurious writes after configuration.
Figure 3-4. F2806 Memory Map
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 27
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
0x00 0000
Block Start
Address
0x00 0400
0x00 0800
0x00 0D00
0x00 6000
0x00 7000
0x00 8000
0x00 9000
0x3D 7800
0x3F 0000
0x3F 7FF8
0x3F 8000
0x3F 9000
0x3F F000
0x3F FFC0
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
OTP (F2802 Only)(A)
(1K y 16, Secure Zone)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
FLASH (F2802) or ROM (C2802)
(32K y 16, Secure Zone)
L0 (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
Boot ROM (4K y 16)
128-bit Password
Data Space Prog Space
0x3D 7C00
Vectors (32 y 32)
(enabled if VMAP = 1, ENPIE = 0)
Low 64K [0000−FFFF]
(24x/240x equivalent data space)
High 64K [3F0000 −3FFFF]
(24x/240x equivalent program space)
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
M0 SARAM (1K y 16)
M1 SARAM (1K y 16)
Peripheral Frame 0
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
Peripheral Frame 1
(protected)
Peripheral Frame 2
(protected)
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
PIE Vector − RAM
(256 x 16)
(Enabled if ENPIE = 1)
0x00 0E00
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
0x00 0040
M0 Vector − RAM (32 x 32)
(Enabled if VMAP = 0)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. The 1K x 16 OTP has been replaced with 1K x 16 ROM in C2802.
B. Memory blocks are not to scale.
C. Peripheral Frame 0, Peripheral Frame 1, and Peripheral Frame 2 memory maps are restricted to data memory only.
User program cannot access these memory maps in program space.
D. Protected means the order of Write followed by Read operations is preserved rather than the pipeline order.
E. Certain memory ranges are EALLOW protected against spurious writes after configuration.
F. Some locations in ROM are reserved for TI. See Table 3-5 for more information.
Figure 3-5. F2802, C2802 Memory Map
28 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
0x00 0000
Block Start
Address
0x00 0400
0x00 0800
0x00 0D00
0x00 6000
0x00 7000
0x00 8000
0x00 9000
0x3D 7800
0x3F 4000
0x3F 7FF8
0x3F 8000
0x3F 9000
0x3F F000
0x3F FFC0
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
OTP (F2801/F2801x Only)(A)
(1K y 16, Secure Zone)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
FLASH (F2801) or ROM (C2801)
(16K y 16, Secure Zone)
L0 (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉ
Boot ROM (4K y 16)
128-bit Password
Data Space Prog Space
0x3D 7C00
Vectors (32 y 32)
(enabled if VMAP = 1, ENPIE = 0)
Low 64K [0000−FFFF]
(24x/240x equivalent data space)
High 64K [3F0000 −3FFFF]
(24x/240x equivalent program space)
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
M1 SARAM (1K y 16)
Peripheral Frame 0
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
Peripheral Frame 1
(protected)
Peripheral Frame 2
(protected)
L0 SARAM (0-wait)
(4K y 16, Secure Zone, Dual-Mapped)
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
ÉÉÉÉÉ
PIE Vector − RAM
(256 x 16)
(Enabled if ENPIE = 1)
0x00 0E00
Reserved
Reserved
Reserved
M0 SARAM (1K y 16)
M0 Vector − RAM (32 x 32)
(Enabled if VMAP = 0)
0x00 0040
Reserved
Reserved
Reserved
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
A. The 1K x 16 OTP has been replaced with 1K x 16 ROM in C2801.
B. Memory blocks are not to scale.
C. Peripheral Frame 0, Peripheral Frame 1, and Peripheral Frame 2 memory maps are restricted to data memory only.
User program cannot access these memory maps in program space.
D. Protected means the order of Write followed by Read operations is preserved rather than the pipeline order.
E. Certain memory ranges are EALLOW protected against spurious writes after configuration.
F. Some locations in ROM are reserved for TI. See Table 3-5 for more information.
Figure 3-6. F2801, F28015, F28016, C2801 Memory Map
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 29
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 3-1. Addresses of Flash Sectors in F2809
ADDRESS RANGE PROGRAM AND DATA SPACE
0x3D 8000 0x3D BFFF Sector H (16K x 16)
0x3D C000 0x3D FFFF Sector G (16K x 16)
0x3E 0000 0x3E 3FFF Sector F (16K x 16)
0x3E 4000 0x3E 7FFF Sector E (16K x 16)
0x3E 8000 0x3E BFFF Sector D (16K x 16)
0x3E C000 0x3E FFFF Sector C (16K x 16)
0x3F 0000 0x3F 3FFF Sector B (16K x 16)
0x3F 4000 0x3F 7F7F Sector A (16K x 16)
Program to 0x0000 when using the
0x3F 7F80 0x3F 7FF5 Code Security Module
Boot-to-Flash Entry Point
0x3F 7FF6 0x3F 7FF7 (program branch instruction here)
Security Password (128-Bit)
0x3F 7FF8 0x3F 7FFF (Do not program to all zeros)
Table 3-2. Addresses of Flash Sectors in F2808
ADDRESS RANGE PROGRAM AND DATA SPACE
0x3E 8000 0x3E BFFF Sector D (16K x 16)
0x3E C000 0x3E FFFF Sector C (16K x 16)
0x3F 0000 0x3F 3FFF Sector B (16K x 16)
0x3F 4000 0x3F 7F7F Sector A (16K x 16)
Program to 0x0000 when using the
0x3F 7F80 0x3F 7FF5 Code Security Module
Boot-to-Flash Entry Point
0x3F 7FF6 0x3F 7FF7 (program branch instruction here)
Security Password (128-Bit)
0x3F 7FF8 0x3F 7FFF (Do not program to all zeros)
Table 3-3. Addresses of Flash Sectors in F2806, F2802
ADDRESS RANGE PROGRAM AND DATA SPACE
0x3F 0000 0x3F 1FFF Sector D (8K x 16)
0x3F 2000 0x3F 3FFF Sector C (8K x 16)
0x3F 4000 0x3F 5FFF Sector B (8K x 16)
0x3F 6000 0x3F 7F7F Sector A (8K x 16)
Program to 0x0000 when using the
0x3F 7F80 0x3F 7FF5 Code Security Module
Boot-to-Flash Entry Point
0x3F 7FF6 0x3F 7FF7 (program branch instruction here)
Security Password (128-Bit)
0x3F 7FF8 0x3F 7FFF (Do not program to all zeros)
30 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 3-4. Addresses of Flash Sectors in F2801, F28015, F28016
ADDRESS RANGE PROGRAM AND DATA SPACE
0x3F 4000 0x3F 4FFF Sector D (4K x 16)
0x3F 5000 0x3F 5FFF Sector C (4K x 16)
0x3F 6000 0x3F 6FFF Sector B (4K x 16)
0x3F 7000 0x3F 7F7F Sector A (4K x 16)
0x3F 7F80 0x3F 7FF5 Program to 0x0000 when using the
Code Security Module
0x3F 7FF6 0x3F 7FF7 Boot-to-Flash Entry Point
(program branch instruction here)
0x3F 7FF8 0x3F 7FFF Security Password (128-Bit)
(Do not program to all zeros)
NOTE
When the code-security passwords are programmed, all addresses between 0x3F7F80
and 0x3F7FF5 cannot be used as program code or data. These locations must be
programmed to 0x0000.
If the code security feature is not used, addresses 0x3F7F80 through 0x3F7FEF may be
used for code or data. Addresses 0x3F7FF0 0x3F7FF5 are reserved for data and
should not contain program code.
On ROM devices, addresses 0x3F7FF0 0x3F7FF5 and 0x3D7BFC 0x3D7BFF are
reserved for TI, irrespective of whether code security has been used or not. User
application should not use these locations in any way.
Table 3-5 shows how to handle these memory locations.
Table 3-5. Impact of Using the Code Security Module
FLASH ROM
ADDRESS Code security enabled Code security disabled Code security enabled Code security disabled
0x3F 7F80 0x3F 7FEF Application code and data Fill with 0x0000 Application code and data
Fill with 0x0000
0x3F 7FF0 0x3F 7FF5 Reserved for data only Reserved for TI. Do not use.
0x3D 7BFC 0x3D 7BFF Application code and data
Peripheral Frame 1 and Peripheral Frame 2 are grouped together so as to enable these blocks to be
write/read peripheral block protected. The protected mode ensures that all accesses to these blocks
happen as written. Because of the C28x pipeline, a write immediately followed by a read, to different
memory locations, will appear in reverse order on the memory bus of the CPU. This can cause problems
in certain peripheral applications where the user expected the write to occur first (as written). The C28x
CPU supports a block protection mode where a region of memory can be protected so as to make sure
that operations occur as written (the penalty is extra cycles are added to align the operations). This mode
is programmable and by default, it will protect the selected zones.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 31
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
The wait-states for the various spaces in the memory map area are listed in Table 3-6.
Table 3-6. Wait-states
AREA WAIT-STATES COMMENTS
M0 and M1 SARAMs 0-wait Fixed
Peripheral Frame 0 0-wait Fixed
0-wait (writes) Fixed. The eCAN peripheral can extend a cycle as needed.
Peripheral Frame 1 2-wait (reads) Back-to-back writes will introduce a 1-cycle delay.
0-wait (writes)
Peripheral Frame 2 Fixed
2-wait (reads)
L0 and L1 SARAMs 0-wait Programmed via the Flash registers. 1-wait-state operation
Programmable,
OTP is possible at a reduced CPU frequency. See Section 3.2.5
1-wait minimum for more information.
Programmed via the Flash registers. 0-wait-state operation
Programmable, is possible at reduced CPU frequency. The CSM password
Flash 0-wait minimum locations are hardwired for 16 wait-states. See
Section 3.2.5 for more information.
H0 SARAM 0-wait Fixed
Boot-ROM 1-wait Fixed
32 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
3.2 Brief Descriptions
3.2.1 C28x CPU
The C28x™ DSP generation is the newest member of the TMS320C2000™ DSP platform. The C28x is a
very efficient C/C++ engine, enabling users to develop not only their system control software in a high-
level language, but also enables math algorithms to be developed using C/C++. The C28x is as efficient in
DSP math tasks as it is in system control tasks that typically are handled by microcontroller devices. This
efficiency removes the need for a second processor in many systems. The 32 x 32-bit MAC capabilities of
the C28x and its 64-bit processing capabilities, enable the C28x to efficiently handle higher numerical
resolution problems that would otherwise demand a more expensive floating-point processor solution. Add
to this the fast interrupt response with automatic context save of critical registers, resulting in a device that
is capable of servicing many asynchronous events with minimal latency. The C28x has an 8-level-deep
protected pipeline with pipelined memory accesses. This pipelining enables the C28x to execute at high
speeds without resorting to expensive high-speed memories. Special branch-look-ahead hardware
minimizes the latency for conditional discontinuities. Special store conditional operations further improve
performance.
3.2.2 Memory Bus (Harvard Bus Architecture)
As with many DSP type devices, multiple busses are used to move data between the memories and
peripherals and the CPU. The C28x memory bus architecture contains a program read bus, data read bus
and data write bus. The program read bus consists of 22 address lines and 32 data lines. The data read
and write busses consist of 32 address lines and 32 data lines each. The 32-bit-wide data busses enable
single cycle 32-bit operations. The multiple bus architecture, commonly termed Harvard Bus, enables the
C28x to fetch an instruction, read a data value and write a data value in a single cycle. All peripherals and
memories attached to the memory bus will prioritize memory accesses. Generally, the priority of memory
bus accesses can be summarized as follows:
Highest: Data Writes (Simultaneous data and program writes cannot occur on the
memory bus.)
Program Writes (Simultaneous data and program writes cannot occur on the
memory bus.)
Data Reads
Program (Simultaneous program reads and fetches cannot occur on the
Reads memory bus.)
Lowest: Fetches (Simultaneous program reads and fetches cannot occur on the
memory bus.)
3.2.3 Peripheral Bus
To enable migration of peripherals between various Texas Instruments (TI) DSP family of devices, the
280x devices adopt a peripheral bus standard for peripheral interconnect. The peripheral bus bridge
multiplexes the various busses that make up the processor Memory Bus into a single bus consisting of
16 address lines and 16 or 32 data lines and associated control signals. Two versions of the peripheral
bus are supported on the 280x. One version only supports 16-bit accesses (called peripheral frame 2).
The other version supports both 16- and 32-bit accesses (called peripheral frame 1).
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 33
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
3.2.4 Real-Time JTAG and Analysis
The 280x implements the standard IEEE 1149.1 JTAG interface. Additionally, the 280x supports real-time
mode of operation whereby the contents of memory, peripheral and register locations can be modified
while the processor is running and executing code and servicing interrupts. The user can also single step
through non-time critical code while enabling time-critical interrupts to be serviced without interference.
The 280x implements the real-time mode in hardware within the CPU. This is a unique feature to the
280x, no software monitor is required. Additionally, special analysis hardware is provided which allows the
user to set hardware breakpoint or data/address watch-points and generate various user-selectable break
events when a match occurs.
3.2.5 Flash
The F2809 contains 128K x 16 of embedded flash memory, segregated into eight 16K x 16 sectors. The
F2808 contains 64K x 16 of embedded flash memory, segregated into four 16K x 16 sectors. The F2806
and F2802 have 32K x 16 of embedded flash, segregated into four 8K x 16 sectors. The F2801 device
contains 16K x 16 of embedded flash, segregated into four 4K x 16 sectors. All five devices also contain a
single 1K x 16 of OTP memory at address range 0x3D 7800 0x3D 7BFF. The user can individually
erase, program, and validate a flash sector while leaving other sectors untouched. However, it is not
possible to use one sector of the flash or the OTP to execute flash algorithms that erase/program other
sectors. Special memory pipelining is provided to enable the flash module to achieve higher performance.
The flash/OTP is mapped to both program and data space; therefore, it can be used to execute code or
store data information. Note that addresses 0x3F7FF0 0x3F7FF5 are reserved for data variables and
should not contain program code.
NOTE
The F2809/F2808/F2806/F2802/F2801 Flash and OTP wait-states can be configured by the
application. This allows applications running at slower frequencies to configure the flash to
use fewer wait-states.
Flash effective performance can be improved by enabling the flash pipeline mode in the
Flash options register. With this mode enabled, effective performance of linear code
execution will be much faster than the raw performance indicated by the wait-state
configuration alone. The exact performance gain when using the Flash pipeline mode is
application-dependent.
For more information on the Flash options, Flash wait-state, and OTP wait-state registers,
see the TMS320x280x, 2801x, 2804x DSP System Control and Interrupts Reference Guide
(literature number SPRU712).
3.2.6 ROM
The C2802 contains 32K x 16 of ROM, while the C2801 contains 16K x 16 of ROM.
3.2.7 M0, M1 SARAMs
All 280x devices contain these two blocks of single-access memory, each 1K x 16 in size. The stack
pointer points to the beginning of block M1 on reset. The M0 and M1 blocks, like all other memory blocks
on C28x devices, are mapped to both program and data space. Hence, the user can use M0 and M1 to
execute code or for data variables. The partitioning is performed within the linker. The C28x device
presents a unified memory map to the programmer. This makes for easier programming in high-level
languages.
34 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
3.2.8 L0, L1, H0 SARAMs
The F2809 and F2808 each contain an additional 16K x 16 of single-access RAM, divided into three
blocks (L0-4K, L1-4K, H0-8K). The F2806 contains an additional 8K x 16 of single-access RAM, divided
into two blocks (L0-4K, L1-4K). The F2802, F2801, C2802, and C2801 each contain an additional 4K x 16
of single-access RAM (L0-4K). Each block can be independently accessed to minimize CPU pipeline
stalls. Each block is mapped to both program and data space.
3.2.9 Boot ROM
The Boot ROM is factory-programmed with boot-loading software. Boot-mode signals are provided to tell
the bootloader software what boot mode to use on power up. The user can select to boot normally or to
download new software from an external connection or to select boot software that is programmed in the
internal Flash/ROM. The Boot ROM also contains standard tables, such as SIN/COS waveforms, for use
in math related algorithms.
Table 3-7. Boot Mode Selection
GPIO18 GPIO29
MODE DESCRIPTION SPICLKA GPIO34
SCITXDA
SCITXDB
Boot to Flash/ROM Jump to Flash/ROM address 0x3F 7FF6 1 1 1
You must have programmed a branch instruction here prior
to reset to redirect code execution as desired.
SCI-A Boot Load a data stream from SCI-A 1 1 0
SPI-A Boot Load from an external serial SPI EEPROM on SPI-A 1 0 1
I2C Boot Load data from an external EEPROM at address 0x50 on 1 0 0
the I2C bus
eCAN-A Boot Call CAN_Boot to load from eCAN-A mailbox 1. 0 1 1
Boot to M0 SARAM Jump to M0 SARAM address 0x00 0000. 0 1 0
Boot to OTP Jump to OTP address 0x3D 7800 0 0 1
Parallel I/O Boot Load data from GPIO0 - GPIO15 0 0 0
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 35
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
3.2.10 Security
The 280x devices support high levels of security to protect the user firmware from being reverse
engineered. The security features a 128-bit password (hardcoded for 16 wait-states), which the user
programs into the flash. One code security module (CSM) is used to protect the flash/OTP and the L0/L1
SARAM blocks. The security feature prevents unauthorized users from examining the memory contents
via the JTAG port, executing code from external memory or trying to boot-load some undesirable software
that would export the secure memory contents. To enable access to the secure blocks, the user must
write the correct 128-bit KEY value, which matches the value stored in the password locations within the
Flash.
NOTE
The 128-bit password (at 0x3F 7FF8 0x3F 7FFF) must not be programmed to zeros. Doing
so would permanently lock the device.
disclaimer
Code Security Module Disclaimer
THE CODE SECURITY MODULE (CSM) INCLUDED ON THIS DEVICE WAS DESIGNED
TO PASSWORD PROTECT THE DATA STORED IN THE ASSOCIATED MEMORY
(EITHER ROM OR FLASH) AND IS WARRANTED BY TEXAS INSTRUMENTS (TI), IN
ACCORDANCE WITH ITS STANDARD TERMS AND CONDITIONS, TO CONFORM TO
TI'S PUBLISHED SPECIFICATIONS FOR THE WARRANTY PERIOD APPLICABLE FOR
THIS DEVICE.
TI DOES NOT, HOWEVER, WARRANT OR REPRESENT THAT THE CSM CANNOT BE
COMPROMISED OR BREACHED OR THAT THE DATA STORED IN THE ASSOCIATED
MEMORY CANNOT BE ACCESSED THROUGH OTHER MEANS. MOREOVER, EXCEPT
AS SET FORTH ABOVE, TI MAKES NO WARRANTIES OR REPRESENTATIONS
CONCERNING THE CSM OR OPERATION OF THIS DEVICE, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL TI BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT,
INCIDENTAL, OR PUNITIVE DAMAGES, HOWEVER CAUSED, ARISING IN ANY WAY
OUT OF YOUR USE OF THE CSM OR THIS DEVICE, WHETHER OR NOT TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCLUDED DAMAGES INCLUDE,
BUT ARE NOT LIMITED TO LOSS OF DATA, LOSS OF GOODWILL, LOSS OF USE OR
INTERRUPTION OF BUSINESS OR OTHER ECONOMIC LOSS.
36 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
3.2.11 Peripheral Interrupt Expansion (PIE) Block
The PIE block serves to multiplex numerous interrupt sources into a smaller set of interrupt inputs. The
PIE block can support up to 96 peripheral interrupts. On the 280x, 43 of the possible 96 interrupts are
used by peripherals. The 96 interrupts are grouped into blocks of 8 and each group is fed into 1 of
12 CPU interrupt lines (INT1 to INT12). Each of the 96 interrupts is supported by its own vector stored in a
dedicated RAM block that can be overwritten by the user. The vector is automatically fetched by the CPU
on servicing the interrupt. It takes 8 CPU clock cycles to fetch the vector and save critical CPU registers.
Hence the CPU can quickly respond to interrupt events. Prioritization of interrupts is controlled in
hardware and software. Each individual interrupt can be enabled/disabled within the PIE block.
3.2.12 External Interrupts (XINT1, XINT2, XNMI)
The 280x supports three masked external interrupts (XINT1, XINT2, XNMI). XNMI can be connected to
the INT13 or NMI interrupt of the CPU. Each of the interrupts can be selected for negative, positive, or
both negative and positive edge triggering and can also be enabled/disabled (including the XNMI). The
masked interrupts also contain a 16-bit free running up counter, which is reset to zero when a valid
interrupt edge is detected. This counter can be used to accurately time stamp the interrupt. Unlike the
281x devices, there are no dedicated pins for the external interrupts. Rather, any Port A GPIO pin can be
configured to trigger any external interrupt.
3.2.13 Oscillator and PLL
The 280x can be clocked by an external oscillator or by a crystal attached to the on-chip oscillator circuit.
A PLL is provided supporting up to 10 input-clock-scaling ratios. The PLL ratios can be changed on-the-fly
in software, enabling the user to scale back on operating frequency if lower power operation is desired.
Refer to the Electrical Specification section for timing details. The PLL block can be set in bypass mode.
3.2.14 Watchdog
The 280x devices contain a watchdog timer. The user software must regularly reset the watchdog counter
within a certain time frame; otherwise, the watchdog will generate a reset to the processor. The watchdog
can be disabled if necessary.
3.2.15 Peripheral Clocking
The clocks to each individual peripheral can be enabled/disabled so as to reduce power consumption
when a peripheral is not in use. Additionally, the system clock to the serial ports (except I2C and eCAN)
and the ADC blocks can be scaled relative to the CPU clock. This enables the timing of peripherals to be
decoupled from increasing CPU clock speeds.
3.2.16 Low-Power Modes
The 280x devices are full static CMOS devices. Three low-power modes are provided:
IDLE: Place CPU into low-power mode. Peripheral clocks may be turned off selectively and
only those peripherals that need to function during IDLE are left operating. An
enabled interrupt from an active peripheral or the watchdog timer will wake the
processor from IDLE mode.
STANDBY: Turns off clock to CPU and peripherals. This mode leaves the oscillator and PLL
functional. An external interrupt event will wake the processor and the peripherals.
Execution begins on the next valid cycle after detection of the interrupt event
HALT: Turns off the internal oscillator. This mode basically shuts down the device and
places it in the lowest possible power consumption mode. A reset or external signal
can wake the device from this mode.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 37
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
3.2.17 Peripheral Frames 0, 1, 2 (PFn)
The 280x segregate peripherals into three sections. The mapping of peripherals is as follows:
PF0: PIE: PIE Interrupt Enable and Control Registers Plus PIE Vector Table
Flash: Flash Control, Programming, Erase, Verify Registers
Timers: CPU-Timers 0, 1, 2 Registers
CSM: Code Security Module KEY Registers
ADC: ADC Result Registers (dual-mapped)
PF1: eCAN: eCAN Mailbox and Control Registers
GPIO: GPIO MUX Configuration and Control Registers
ePWM: Enhanced Pulse Width Modulator Module and Registers
eCAP: Enhanced Capture Module and Registers
eQEP: Enhanced Quadrature Encoder Pulse Module and Registers
PF2: SYS: System Control Registers
SCI: Serial Communications Interface (SCI) Control and RX/TX Registers
SPI: Serial Port Interface (SPI) Control and RX/TX Registers
ADC: ADC Status, Control, and Result Register
I2C: Inter-Integrated Circuit Module and Registers
3.2.18 General-Purpose Input/Output (GPIO) Multiplexer
Most of the peripheral signals are multiplexed with general-purpose input/output (GPIO) signals. This
enables the user to use a pin as GPIO if the peripheral signal or function is not used. On reset, GPIO pins
are configured as inputs. The user can individually program each pin for GPIO mode or peripheral signal
mode. For specific inputs, the user can also select the number of input qualification cycles. This is to filter
unwanted noise glitches. The GPIO signals can also be used to bring the device out of specific low-power
modes.
3.2.19 32-Bit CPU-Timers (0, 1, 2)
CPU-Timers 0, 1, and 2 are identical 32-bit timers with presettable periods and with 16-bit clock
prescaling. The timers have a 32-bit count-down register, which generates an interrupt when the counter
reaches zero. The counter is decremented at the CPU clock speed divided by the prescale value setting.
When the counter reaches zero, it is automatically reloaded with a 32-bit period value. CPU-Timer 2 is
reserved for the DSP/BIOS Real-Time OS, and is connected to INT14 of the CPU. If DSP/BIOS is not
being used, CPU-Timer 2 is available for general use. CPU-Timer 1 is for general use and can be
connected to INT13 of the CPU. CPU-Timer 0 is also for general use and is connected to the PIE block.
3.2.20 Control Peripherals
The 280x devices support the following peripherals which are used for embedded control and
communication:
ePWM: The enhanced PWM peripheral supports independent/complementary PWM
generation, adjustable dead-band generation for leading/trailing edges,
latched/cycle-by-cycle trip mechanism. Some of the PWM pins support HRPWM
features.
eCAP: The enhanced capture peripheral uses a 32-bit time base and registers up to four
programmable events in continuous/one-shot capture modes.
This peripheral can also be configured to generate an auxiliary PWM signal.
38 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
eQEP: The enhanced QEP peripheral uses a 32-bit position counter, supports low-speed
measurement using capture unit and high-speed measurement using a 32-bit unit
timer.
This peripheral has a watchdog timer to detect motor stall and input error detection
logic to identify simultaneous edge transition in QEP signals.
ADC: The ADC block is a 12-bit converter, single-ended, 16-channels. It contains two
sample-and-hold units for simultaneous sampling.
3.2.21 Serial Port Peripherals
The 280x devices support the following serial communication peripherals:
eCAN: This is the enhanced version of the CAN peripheral. It supports 32 mailboxes, time
stamping of messages, and is CAN 2.0B-compliant.
SPI: The SPI is a high-speed, synchronous serial I/O port that allows a serial bit stream of
programmed length (one to sixteen bits) to be shifted into and out of the device at a
programmable bit-transfer rate. Normally, the SPI is used for communications
between the DSP controller and external peripherals or another processor. Typical
applications include external I/O or peripheral expansion through devices such as
shift registers, display drivers, and ADCs. Multi-device communications are
supported by the master/slave operation of the SPI. On the 280x, the SPI contains a
16-level receive and transmit FIFO for reducing interrupt servicing overhead.
SCI: The serial communications interface is a two-wire asynchronous serial port,
commonly known as UART. On the 280x, the SCI contains a 16-level receive and
transmit FIFO for reducing interrupt servicing overhead.
I2C: The inter-integrated circuit (I2C) module provides an interface between a DSP and
other devices compliant with Philips Semiconductors Inter-IC bus (I2C-bus)
specification version 2.1 and connected by way of an I2C-bus. External components
attached to this 2-wire serial bus can transmit/receive up to 8-bit data to/from the
DSP through the I2C module. On the 280x, the I2C contains a 16-level receive and
transmit FIFO for reducing interrupt servicing overhead.
3.3 Register Map
The 280x devices contain three peripheral register spaces. The spaces are categorized as follows:
Peripheral These are peripherals that are mapped directly to the CPU memory bus.
Frame 0: See Table 3-8.
Peripheral These are peripherals that are mapped to the 32-bit peripheral bus.
Frame 1 See Table 3-9.
Peripheral These are peripherals that are mapped to the 16-bit peripheral bus.
Frame 2: See Table 3-10.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 39
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 3-8. Peripheral Frame 0 Registers(1) (2)
NAME ADDRESS RANGE SIZE (x16) ACCESS TYPE(3)
Device Emulation Registers 0x0880 0x09FF 384 EALLOW protected
EALLOW protected
FLASH Registers(4) 0x0A80 0x0ADF 96 CSM Protected
Code Security Module Registers 0x0AE0 0x0AEF 16 EALLOW protected
ADC Result Registers (dual-mapped) 0x0B00 0x0B0F 16 Not EALLOW protected
CPU-TIMER0/1/2 Registers 0x0C00 0x0C3F 64 Not EALLOW protected
PIE Registers 0x0CE0 0x0CFF 32 Not EALLOW protected
PIE Vector Table 0x0D00 0x0DFF 256 EALLOW protected
(1) Registers in Frame 0 support 16-bit and 32-bit accesses.
(2) Missing segments of memory space are reserved and should not be used in applications.
(3) If registers are EALLOW protected, then writes cannot be performed until the EALLOW instruction is executed. The EDIS instruction
disables writes to prevent stray code or pointers from corrupting register contents.
(4) The Flash Registers are also protected by the Code Security Module (CSM).
Table 3-9. Peripheral Frame 1 Registers(1) (2)
NAME ADDRESS RANGE SIZE (x16) ACCESS TYPE
Some eCAN control registers (and selected
eCANA Registers 0x6000 0x60FF 256 bits in other eCAN control registers) are
EALLOW-protected.
eCANA Mailbox RAM 0x6100 0x61FF 256 Not EALLOW-protected
Some eCAN control registers (and selected
eCANB Registers 0x6200 0x62FF 256 bits in other eCAN control registers) are
EALLOW-protected.
eCANB Mailbox RAM 0x6300 0x63FF 256 Not EALLOW-protected
ePWM1 Registers 0x6800 0x683F 64
ePWM2 Registers 0x6840 0x687F 64
ePWM3 Registers 0x6880 0x68BF 64 Some ePWM registers are EALLOW
protected. See Table 4-2.
ePWM4 Registers 0x68C0 0x68FF 64
ePWM5 Registers 0x6900 0x693F 64
ePWM6 Registers 0x6940 0x697F 64
eCAP1 Registers 0x6A00 0x6A1F 32
eCAP2 Registers 0x6A20 0x6A3F 32
eCAP3 Registers 0x6A40 0x6A5F 32 Not EALLOW protected
eCAP4 Registers 0x6A60 0x6A7F 32
eQEP1 Registers 0x6B00 0x6B3F 64
eQEP2 Registers 0x6B40 0x6B7F 64
GPIO Control Registers 0x6F80 0x6FBF 128 EALLOW protected
GPIO Data Registers 0x6FC0 0x6FDF 32 Not EALLOW protected
GPIO Interrupt and LPM Select Registers 0x6FE0 0x6FFF 32 EALLOW protected
(1) The eCAN control registers only support 32-bit read/write operations. All 32-bit accesses are aligned to even address boundaries.
(2) Missing segments of memory space are reserved and should not be used in applications.
40 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 3-10. Peripheral Frame 2 Registers(1) (2)
NAME ADDRESS RANGE SIZE (x16) ACCESS TYPE
System Control Registers 0x7010 0x702F 32 EALLOW Protected
SPI-A Registers 0x7040 0x704F 16
SCI-A Registers 0x7050 0x705F 16
External Interrupt Registers 0x7070 0x707F 16
ADC Registers 0x7100 0x711F 32
SPI-B Registers 0x7740 0x774F 16 Not EALLOW Protected
SCI-B Registers 0x7750 0x775F 16
SPI-C Registers 0x7760 0x776F 16
SPI-D Registers 0x7780 0x778F 16
I2C Registers 0x7900 0x792F 48
(1) Peripheral Frame 2 only allows 16-bit accesses. All 32-bit accesses are ignored (invalid data may be returned or written).
(2) Missing segments of memory space are reserved and should not be used in applications.
3.4 Device Emulation Registers
These registers are used to control the protection mode of the C28x CPU and to monitor some critical
device signals. The registers are defined in Table 3-11.
Table 3-11. Device Emulation Registers
ADDRESS
NAME SIZE (x16) DESCRIPTION
RANGE
0x0880
DEVICECNF 2 Device Configuration Register
0x0881
PARTID 0x0882 1 Part ID Register 0x002C(1) - F2801
0x0024 F2802
0x0034 F2806
0x003C F2808
0x00FE F2809
0x0014 F28016
0x001C F28015
0xFF2C C2801
0xFF24 C2802
REVID 0x0883 1 Revision ID Register 0x0000 Silicon Rev. 0 TMX
0x0001 Silicon Rev. A TMX
0x0002 Silicon Rev. B TMS
0x0003 Silicon Rev. C TMS
Revision ID Register 0x0000 Silicon rev. 0 TMS (F2809 only)
PROTSTART 0x0884 1 Block Protection Start Address Register
PROTRANGE 0x0885 1 Block Protection Range Address Register
(1) The first byte (00) denotes flash devices. FF denotes ROM devices. Other values are reserved for future devices.
3.5 Interrupts
Figure 3-7 shows how the various interrupt sources are multiplexed within the 280x devices.
Eight PIE block interrupts are grouped into one CPU interrupt. In total, 12 CPU interrupt groups, with
8 interrupts per group equals 96 possible interrupts. On the 280x, 43 of these are used by peripherals as
shown in Table 3-12.
The TRAP #VectorNumber instruction transfers program control to the interrupt service routine
corresponding to the vector specified. TRAP #0 attempts to transfer program control to the address
pointed to by the reset vector. The PIE vector table does not, however, include a reset vector. Therefore,
TRAP #0 should not be used when the PIE is enabled. Doing so will result in undefined behavior.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 41
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
XINT2
C28x
CPU
CPU TIMER 2 (Reserved for DSP/BIOS)
CPU TIMER 0
Watchdog
Peripherals
(SPI, SCI, I2C, eCAN, ePWM, eCAP, eQEP, ADC)
TINT0
Interrupt Control
XNMICR(15:0)
XINT1
MUX
MUX
MUX
MUX MUX
Interrupt Control
XINT1
XINT1CR(15:0)
Interrupt Control
XINT2
96 Interrupts
PIE
XINT2CR(15:0)
GPIO
MUX
WDINT
INT1
to
INT12
INT13
INT14
NMI
XINT1CTR(15:0)
XINT2CTR(15:0)
XNMICTR(15:0)
CPU TIMER 1
TINT2
Low-Power Modes
LPMINT
WAKEINT
TINT1
int13_select
XNMI_XINT13
GPIO0.int
GPIO31.int
ADC XINT2SOC
GPIOXINT1SEL(4:0)
GPIOXINT2SEL(4:0)
GPIOXNMISEL(4:0)
nmi_select
1
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
When the PIE is enabled, TRAP #1 through TRAP #12 will transfer program control to the interrupt service
routine corresponding to the first vector within the PIE group. For example: TRAP #1 fetches the vector
from INT1.1, TRAP #2 fetches the vector from INT2.1 and so forth.
Figure 3-7. External and PIE Interrupt Sources
42 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
INT12
MUX
INT11
INT2
INT1
CPU
(Enable)(Flag)
INTx
INTx.8
PIEIERx[8:1] PIEIFRx[8:1]
MUX
INTx.7
INTx.6
INTx.5
INTx.4
INTx.3
INTx.2
INTx.1
From
Peripherals
or
External
Interrupts
(Enable) (Flag)
IER[12:1]IFR[12:1]
Global
Enable
INTM
1
0
PIEACKx
(Enable/Flag)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 3-8. Multiplexing of Interrupts Using the PIE Block
Table 3-12. PIE Peripheral Interrupts(1)
PIE INTERRUPTS
CPU
INTERRUPTS INTx.8 INTx.7 INTx.6 INTx.5 INTx.4 INTx.3 INTx.2 INTx.1
WAKEINT TINT0 ADCINT SEQ2INT SEQ1INT
INT1 XINT2 XINT1 Reserved
(LPM/WD) (TIMER 0) (ADC) (ADC) (ADC)
EPWM6_TZINT EPWM5_TZINT EPWM4_TZINT EPWM3_TZINT EPWM2_TZINT EPWM1_TZINT
INT2 Reserved Reserved (ePWM6) (ePWM5) (ePWM4) (ePWM3) (ePWM2) (ePWM1)
EPWM6_INT EPWM5_INT EPWM4_INT EPWM3_INT EPWM2_INT EPWM1_INT
INT3 Reserved Reserved (ePWM6) (ePWM5) (ePWM4) (ePWM3) (ePWM2) (ePWM1)
ECAP4_INT ECAP3_INT ECAP2_INT ECAP1_INT
INT4 Reserved Reserved Reserved Reserved (eCAP4) (eCAP3) (eCAP2) (eCAP1)
EQEP2_INT EQEP1_INT
INT5 Reserved Reserved Reserved Reserved Reserved Reserved (eQEP2) (eQEP1)
SPITXINTD SPIRXINTD SPITXINTC SPIRXINTC SPITXINTB SPIRXINTB SPITXINTA SPIRXINTA
INT6 (SPI-D) (SPI-D) (SPI-C) (SPI-C) (SPI-B) (SPI-B) (SPI-A) (SPI-A)
INT7 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
I2CINT2A I2CINT1A
INT8 Reserved Reserved Reserved Reserved Reserved Reserved (I2C-A) (I2C-A)
ECAN1_INTB ECAN0_INTB ECAN1_INTA ECAN0_INTA SCITXINTB SCIRXINTB SCITXINTA SCIRXINTA
INT9 (CAN-B) (CAN-B) (CAN-A) (CAN-A) (SCI-B) (SCI-B) (SCI-A) (SCI-A)
INT10 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
INT11 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
INT12 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
(1) Out of the 96 possible interrupts, 43 interrupts are currently used. The remaining interrupts are reserved for future devices. These
interrupts can be used as software interrupts if they are enabled at the PIEIFRx level, provided none of the interrupts within the group is
being used by a peripheral. Otherwise, interrupts coming in from peripherals may be lost by accidentally clearing their flag while
modifying the PIEIFR. To summarize, there are two safe cases when the reserved interrupts could be used as software interrupts:
1) No peripheral within the group is asserting interrupts.
2) No peripheral interrupts are assigned to the group (example PIE group 12).
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 43
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 3-13. PIE Configuration and Control Registers
NAME ADDRESS SIZE (x16) DESCRIPTION(1)
PIECTRL 0x0CE0 1 PIE, Control Register
PIEACK 0x0CE1 1 PIE, Acknowledge Register
PIEIER1 0x0CE2 1 PIE, INT1 Group Enable Register
PIEIFR1 0x0CE3 1 PIE, INT1 Group Flag Register
PIEIER2 0x0CE4 1 PIE, INT2 Group Enable Register
PIEIFR2 0x0CE5 1 PIE, INT2 Group Flag Register
PIEIER3 0x0CE6 1 PIE, INT3 Group Enable Register
PIEIFR3 0x0CE7 1 PIE, INT3 Group Flag Register
PIEIER4 0x0CE8 1 PIE, INT4 Group Enable Register
PIEIFR4 0x0CE9 1 PIE, INT4 Group Flag Register
PIEIER5 0x0CEA 1 PIE, INT5 Group Enable Register
PIEIFR5 0x0CEB 1 PIE, INT5 Group Flag Register
PIEIER6 0x0CEC 1 PIE, INT6 Group Enable Register
PIEIFR6 0x0CED 1 PIE, INT6 Group Flag Register
PIEIER7 0x0CEE 1 PIE, INT7 Group Enable Register
PIEIFR7 0x0CEF 1 PIE, INT7 Group Flag Register
PIEIER8 0x0CF0 1 PIE, INT8 Group Enable Register
PIEIFR8 0x0CF1 1 PIE, INT8 Group Flag Register
PIEIER9 0x0CF2 1 PIE, INT9 Group Enable Register
PIEIFR9 0x0CF3 1 PIE, INT9 Group Flag Register
PIEIER10 0x0CF4 1 PIE, INT10 Group Enable Register
PIEIFR10 0x0CF5 1 PIE, INT10 Group Flag Register
PIEIER11 0x0CF6 1 PIE, INT11 Group Enable Register
PIEIFR11 0x0CF7 1 PIE, INT11 Group Flag Register
PIEIER12 0x0CF8 1 PIE, INT12 Group Enable Register
PIEIFR12 0x0CF9 1 PIE, INT12 Group Flag Register
Reserved 0x0CFA 6 Reserved
0x0CFF
(1) The PIE configuration and control registers are not protected by EALLOW mode. The PIE vector table
is protected.
3.5.1 External Interrupts
Table 3-14. External Interrupt Registers
NAME ADDRESS SIZE (x16) DESCRIPTION
XINT1CR 0x7070 1 XINT1 control register
XINT2CR 0x7071 1 XINT2 control register
Reserved 0x7072 0x7076 5 Reserved
XNMICR 0x7077 1 XNMI control register
XINT1CTR 0x7078 1 XINT1 counter register
XINT2CTR 0x7079 1 XINT2 counter register
Reserved 0x707A 0x707E 5 Reserved
XNMICTR 0x707F 1 XNMI counter register
44 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
PLL
X1
X2
Power
Modes
Control
Watchdog
Block
28x
CPU
Peripheral Bus
High-Speed Prescaler
Low-Speed Prescaler
Clock Enables
GPIO
MUX
XCLKIN
16 ADC Inputs
LSPCLK
I/O
Peripheral Reset
SYSCLKOUT(A) XRS
Reset
GPIOs
I/O
OSC
CLKIN(A)
HSPCLK
I/O
Peripheral
Registers
CPU
Timers
System
Control
Registers
Peripheral
Registers
ePWM 1/2/3/4/5/6
eCAP 1/2/3/4 eQEP 1/2
ADC
Registers 12-Bit ADC
Peripheral
Registers
Low-Speed Peripherals
SCI-A/B, SPI-A/B/C/D
Peripheral
Registers
eCAN-A/B
I2C-A
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Each external interrupt can be enabled/disabled or qualified using positive, negative, or both positive and
negative edge. For more information, see the TMS320x280x, 2801x, 2804x DSP System Control and
Interrupts Reference Guide (literature number SPRU712).
3.6 System Control
This section describes the 280x oscillator, PLL and clocking mechanisms, the watchdog function and the
low power modes. Figure 3-9 shows the various clock and reset domains in the 280x devices that will be
discussed.
A. CLKIN is the clock into the CPU. It is passed out of the CPU as SYSCLKOUT (that is, CLKIN is the same frequency
as SYSCLKOUT).
Figure 3-9. Clock and Reset Domains
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 45
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
X1
XCLKIN
(3.3-V Clock Input)
On-Chip
Oscillator
X2
XOR
PLLSTS[OSCOFF]
OSCCLK
PLL VCOCLK
OSCCLK
or
VCOCLK CLKIN
OSCCLK 0
PLLSTS[PLLOFF]
n
/2
PLLSTS[CLKINDIV]
n0
4-bit PLL Select
(PLLCR)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
The PLL, clocking, watchdog and low-power modes, are controlled by the registers listed in Table 3-15.
Table 3-15. PLL, Clocking, Watchdog, and Low-Power Mode Registers(1)
NAME ADDRESS SIZE (x16) DESCRIPTION
XCLK 0x7010 1 XCLKOUT Pin Control, X1 and XCLKIN Status Register
PLLSTS 0x7011 1 PLL Status Register
Reserved 0x7012 0x7019 8 Reserved
HISPCP 0x701A 1 High-Speed Peripheral Clock Prescaler Register (for HSPCLK)
LOSPCP 0x701B 1 Low-Speed Peripheral Clock Prescaler Register (for LSPCLK)
PCLKCR0 0x701C 1 Peripheral Clock Control Register 0
PCLKCR1 0x701D 1 Peripheral Clock Control Register 1
LPMCR0 0x701E 1 Low-Power Mode Control Register 0
Reserved 0x701F 0x7020 1 Reserved
PLLCR 0x7021 1 PLL Control Register
SCSR 0x7022 1 System Control and Status Register
WDCNTR 0x7023 1 Watchdog Counter Register
Reserved 0x7024 1 Reserved
WDKEY 0x7025 1 Watchdog Reset Key Register
Reserved 0x7026 0x7028 3 Reserved
WDCR 0x7029 1 Watchdog Control Register
Reserved 0x702A 0x702F 6 Reserved
(1) All of the registers in this table are EALLOW protected.
3.6.1 OSC and PLL Block
Figure 3-10 shows the OSC and PLL block on the 280x.
Figure 3-10. OSC and PLL Block Diagram
The on-chip oscillator circuit enables a crystal/resonator to be attached to the 280x devices using the X1
and X2 pins. If the on-chip oscillator is not used, an external oscillator can be used in either one of the
following configurations:
1. A 3.3-V external oscillator can be directly connected to the XCLKIN pin. The X2 pin should be left
unconnected and the X1 pin tied low. The logic-high level in this case should not exceed VDDIO.
2. A 1.8-V external oscillator can be directly connected to the X1 pin. The X2 pin should be left
unconnected and the XCLKIN pin tied low. The logic-high level in this case should not exceed VDD.
46 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
CL1
X2X1
Crystal
CL2
XCLKIN
External Clock Signal
(Toggling 0-V )
DD
XCLKIN X2
NC
X1
External Clock Signal
(Toggling 0-V )
DDIO
XCLKIN X2
NC
X1
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
The three possible input-clock configurations are shown in Figure 3-11 through Figure 3-13.
Figure 3-11. Using a 3.3-V External Oscillator
Figure 3-12. Using a 1.8-V External Oscillator
Figure 3-13. Using the Internal Oscillator
3.6.1.1 External Reference Oscillator Clock Option
The typical specifications for the external quartz crystal for a frequency of 20 MHz are listed below:
Fundamental mode, parallel resonant
CL(load capacitance) = 12 pF
CL1 = CL2 = 24 pF
Cshunt = 6 pF
ESR range = 30 to 60
TI recommends that customers have the resonator/crystal vendor characterize the operation of their
device with the DSP chip. The resonator/crystal vendor has the equipment and expertise to tune the tank
circuit. The vendor can also advise the customer regarding the proper tank component values that will
produce proper start up and stability over the entire operating range.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 47
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
3.6.1.2 PLL-Based Clock Module
The 280x devices have an on-chip, PLL-based clock module. This module provides all the necessary
clocking signals for the device, as well as control for low-power mode entry. The PLL has a 4-bit ratio
control PLLCR[DIV] to select different CPU clock rates. The watchdog module should be disabled before
writing to the PLLCR register. It can be re-enabled (if need be) after the PLL module has stabilized, which
takes 131072 OSCCLK cycles.
Table 3-16. PLLCR Register Bit Definitions
SYSCLKOUT
PLLCR[DIV](1) (CLKIN)(2)
0000 (PLL bypass) OSCCLK/n
0001 (OSCCLK*1)/n
0010 (OSCCLK*2)/n
0011 (OSCCLK*3)/n
0100 (OSCCLK*4)/n
0101 (OSCCLK*5)/n
0110 (OSCCLK*6)/n
0111 (OSCCLK*7)/n
1000 (OSCCLK*8)/n
1001 (OSCCLK*9)/n
1010 (OSCCLK*10)/n
1011–1111 Reserved
(1) This register is EALLOW protected.
(2) CLKIN is the input clock to the CPU. SYSCLKOUT is the output
clock from the CPU. The frequency of SYSCLKOUT is the same as
CLKIN. If CLKINDIV = 0, n = 2; if CLKINDIV = 1, n = 1.
NOTE
PLLSTS[CLKINDIV] enables or bypasses the divide-by-two block before the clock is fed to
the core. This bit must be 0 before writing to the PLLCR and must only be set after
PLLSTS[PLLLOCKS] = 1.
The PLL-based clock module provides two modes of operation:
Crystal-operation - This mode allows the use of an external crystal/resonator to provide the time base
to the device.
External clock source operation - This mode allows the internal oscillator to be bypassed. The device
clocks are generated from an external clock source input on the X1 or the XCLKIN pin.
48 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 3-17. Possible PLL Configuration Modes
SYSCLKOUT
PLL MODE REMARKS PLLSTS[CLKINDIV] (CLKIN)
Invoked by the user setting the PLLOFF bit in the PLLSTS register. The PLL block 0 OSCCLK/2
is disabled in this mode. This can be useful to reduce system noise and for low
PLL Off power operation. The PLLCR register must first be set to 0x0000 (PLL Bypass) 1 OSCCLK
before entering this mode. The CPU clock (CLKIN) is derived directly from the
input clock on either X1/X2, X1 or XCLKIN.
PLL Bypass is the default PLL configuration upon power-up or after an external 0 OSCCLK/2
reset (XRS). This mode is selected when the PLLCR register is set to 0x0000 or
PLL Bypass while the PLL locks to a new frequency after the PLLCR register has been 1 OSCCLK
modified. In this mode, the PLL itself is bypassed but the PLL is not turned off.
Achieved by writing a non-zero value n into the PLLCR register. Upon writing to the
PLL Enable 0 OSCCLK*n/2
PLLCR the device will switch to PLL Bypass mode until the PLL locks.
3.6.1.3 Loss of Input Clock
In PLL-enabled and PLL-bypass mode, if the input clock OSCCLK is removed or absent, the PLL will still
issue a limp-mode clock. The limp-mode clock continues to clock the CPU and peripherals at a typical
frequency of 1–5 MHz. Limp mode is not specified to work from power-up, only after input clocks have
been present initially. In PLL bypass mode, the limp mode clock from the PLL is automatically routed to
the CPU if the input clock is removed or absent.
Normally, when the input clocks are present, the watchdog counter decrements to initiate a watchdog
reset or WDINT interrupt. However, when the external input clock fails, the watchdog counter stops
decrementing (that is, the watchdog counter does not change with the limp-mode clock). In addition to
this, the device will be reset and the “Missing Clock Status” (MCLKSTS) bit will be set. These conditions
could be used by the application firmware to detect the input clock failure and initiate necessary shut-down
procedure for the system.
NOTE
Applications in which the correct CPU operating frequency is absolutely critical should
implement a mechanism by which the DSP will be held in reset, should the input clocks ever
fail. For example, an R-C circuit may be used to trigger the XRS pin of the DSP, should the
capacitor ever get fully charged. An I/O pin may be used to discharge the capacitor on a
periodic basis to prevent it from getting fully charged. Such a circuit would also help in
detecting failure of the flash memory and the VDD3VFL rail.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 49
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
/512
OSCCLK
WDCR (WDPS[2:0])
WDCLK
WDCNTR[7:0]
WDKEY[7:0]
Good Key
101
WDCR (WDCHK[2:0])
Bad
WDCHK
Key
WDCR (WDDIS)
Clear Counter
SCSR (WDENINT)
Watchdog
Prescaler
Generate
Output Pulse
(512 OSCCLKs)
8-Bit
Watchdog
Counter
CLR
WDRST
WDINT
Watchdog
55 + AA
Key Detector
XRS
Core-reset
WDRST(A)
Internal
Pullup
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
3.6.2 Watchdog Block
The watchdog block on the 280x is similar to the one used on the 240x and 281x devices. The watchdog
module generates an output pulse, 512 oscillator clocks wide (OSCCLK), whenever the 8-bit watchdog up
counter has reached its maximum value. To prevent this, the user disables the counter or the software
must periodically write a 0x55 + 0xAA sequence into the watchdog key register which will reset the
watchdog counter. Figure 3-14 shows the various functional blocks within the watchdog module.
A. The WDRST signal is driven low for 512 OSCCLK cycles.
Figure 3-14. Watchdog Module
The WDINT signal enables the watchdog to be used as a wakeup from IDLE/STANDBY mode.
In STANDBY mode, all peripherals are turned off on the device. The only peripheral that remains
functional is the watchdog. The WATCHDOG module will run off OSCCLK. The WDINT signal is fed to the
LPM block so that it can wake the device from STANDBY (if enabled). See Section 3.7, Low-Power
Modes Block, for more details.
In IDLE mode, the WDINT signal can generate an interrupt to the CPU, via the PIE, to take the CPU out of
IDLE mode.
In HALT mode, this feature cannot be used because the oscillator (and PLL) are turned off and hence so
is the WATCHDOG.
50 Functional Overview Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
3.7 Low-Power Modes Block
The low-power modes on the 280x are similar to the 240x devices. Table 3-18 summarizes the various
modes.
Table 3-18. Low-Power Modes
MODE LPMCR0(1:0) OSCCLK CLKIN SYSCLKOUT EXIT(1)
XRS, Watchdog interrupt, any enabled
IDLE 00 On On On(2) interrupt, XNMI
On XRS, Watchdog interrupt, GPIO Port A
STANDBY 01 Off Off
(watchdog still running) signal, debugger(3), XNMI
Off XRS, GPIO Port A signal, XNMI,
HALT 1X (oscillator and PLL turned off, Off Off debugger(3)
watchdog not functional)
(1) The Exit column lists which signals or under what conditions the low power mode will be exited. A low signal, on any of the signals, will
exit the low power condition. This signal must be kept low long enough for an interrupt to be recognized by the device. Otherwise the
IDLE mode will not be exited and the device will go back into the indicated low power mode.
(2) The IDLE mode on the C28x behaves differently than on the 24x/240x. On the C28x, the clock output from the CPU (SYSCLKOUT) is
still functional while on the 24x/240x the clock is turned off.
(3) On the C28x, the JTAG port can still function even if the CPU clock (CLKIN) is turned off.
The various low-power modes operate as follows:
IDLE Mode: This mode is exited by any enabled interrupt or an XNMI that is recognized
by the processor. The LPM block performs no tasks during this mode as
long as the LPMCR0(LPM) bits are set to 0,0.
STANDBY Mode: Any GPIO port A signal (GPIO[31:0]) can wake the device from STANDBY
mode. The user must select which signal(s) will wake the device in the
GPIOLPMSEL register. The selected signal(s) are also qualified by the
OSCCLK before waking the device. The number of OSCCLKs is specified in
the LPMCR0 register.
HALT Mode: Only the XRS and any GPIO port A signal (GPIO[31:0]) can wake the
device from HALT mode. The user selects the signal in the GPIOLPMSEL
register.
NOTE
The low-power modes do not affect the state of the output pins (PWM pins included). They
will be in whatever state the code left them in when the IDLE instruction was executed. See
the TMS320x280x, 2801x, 2804x DSP System Control and Interrupts Reference Guide
(literature number SPRU712) for more details.
Copyright © 2003–2012, Texas Instruments Incorporated Functional Overview 51
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Borrow
Reset
Timer Reload
SYSCLKOUT
TCR.4
(Timer Start Status)
TINT
16-Bit Timer Divide-Down
TDDRH:TDDR 32-Bit Timer Period
PRDH:PRD
32-Bit Counter
TIMH:TIM
16-Bit Prescale Counter
PSCH:PSC
Borrow
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
4 Peripherals
The integrated peripherals of the 280x are described in the following subsections:
Three 32-bit CPU-Timers
Up to six enhanced PWM modules (ePWM1, ePWM2, ePWM3, ePWM4, ePWM5, ePWM6)
Up to four enhanced capture modules (eCAP1, eCAP2, eCAP3, eCAP4)
Up to two enhanced QEP modules (eQEP1, eQEP2)
Enhanced analog-to-digital converter (ADC) module
Up to two enhanced controller area network (eCAN) modules (eCAN-A, eCAN-B)
Up to two serial communications interface modules (SCI-A, SCI-B)
Up to four serial peripheral interface (SPI) modules (SPI-A, SPI-B, SPI-C, SPI-D)
Inter-integrated circuit module (I2C)
Digital I/O and shared pin functions
4.1 32-Bit CPU-Timers 0/1/2
There are three 32-bit CPU-timers on the 280x devices (CPU-TIMER0/1/2).
CPU-Timer 0 and CPU-Timer 1 can be used in user applications. Timer 2 is reserved for DSP/BIOS™.
These timers are different from the timers that are present in the ePWM modules.
NOTE
If the application is not using DSP/BIOS, then CPU-Timer 2 can be used in the application.
Figure 4-1. CPU-Timers
52 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
INT1
to
INT12
INT14
C28x
TINT2
TINT0
PIE
CPU-TIMER 2
(Reserved for
DSP/BIOS)
INT13 TINT1
XINT13
CPU-TIMER 0
CPU-TIMER 1
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
In the 280x devices, the timer interrupt signals (TINT0, TINT1, TINT2) are connected as shown in
Figure 4-2.
A. The timer registers are connected to the memory bus of the C28x processor.
B. The timing of the timers is synchronized to SYSCLKOUT of the processor clock.
Figure 4-2. CPU-Timer Interrupt Signals and Output Signal
The general operation of the timer is as follows: The 32-bit counter register "TIMH:TIM" is loaded with the
value in the period register "PRDH:PRD". The counter register decrements at the SYSCLKOUT rate of the
C28x. When the counter reaches 0, a timer interrupt output signal generates an interrupt pulse. The
registers listed in Table 4-1 are used to configure the timers. For more information, see the TMS320x280x,
2801x, 2804x DSP System Control and Interrupts Reference Guide (literature number SPRU712).
Table 4-1. CPU-Timers 0, 1, 2 Configuration and Control Registers
NAME ADDRESS SIZE (x16) DESCRIPTION
TIMER0TIM 0x0C00 1 CPU-Timer 0, Counter Register
TIMER0TIMH 0x0C01 1 CPU-Timer 0, Counter Register High
TIMER0PRD 0x0C02 1 CPU-Timer 0, Period Register
TIMER0PRDH 0x0C03 1 CPU-Timer 0, Period Register High
TIMER0TCR 0x0C04 1 CPU-Timer 0, Control Register
Reserved 0x0C05 1 Reserved
TIMER0TPR 0x0C06 1 CPU-Timer 0, Prescale Register
TIMER0TPRH 0x0C07 1 CPU-Timer 0, Prescale Register High
TIMER1TIM 0x0C08 1 CPU-Timer 1, Counter Register
TIMER1TIMH 0x0C09 1 CPU-Timer 1, Counter Register High
TIMER1PRD 0x0C0A 1 CPU-Timer 1, Period Register
TIMER1PRDH 0x0C0B 1 CPU-Timer 1, Period Register High
TIMER1TCR 0x0C0C 1 CPU-Timer 1, Control Register
Reserved 0x0C0D 1 Reserved
TIMER1TPR 0x0C0E 1 CPU-Timer 1, Prescale Register
TIMER1TPRH 0x0C0F 1 CPU-Timer 1, Prescale Register High
TIMER2TIM 0x0C10 1 CPU-Timer 2, Counter Register
TIMER2TIMH 0x0C11 1 CPU-Timer 2, Counter Register High
TIMER2PRD 0x0C12 1 CPU-Timer 2, Period Register
TIMER2PRDH 0x0C13 1 CPU-Timer 2, Period Register High
TIMER2TCR 0x0C14 1 CPU-Timer 2, Control Register
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 53
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
PIE
Peripheral Bus
ePWM1 Module
ePWM2 Module
ePWMx Module
EPWM1SYNCI
EPWM2SYNCI
EPWM2SYNCO
EPWMxSYNCI
EPWMxSYNCO
ADC
GPIO
MUX
EPWM1SYNCI
EPWM1SYNCO
ADCSOCx0
EPWMxA
EPWMxB
EPWM2A
EPWM2B
EPWM1A
EPWM1B
EPWM1INT
EPWM1SOC
EPWM2INT
EPWM2SOC
EPWMxINT
EPWMxSOC
To eCAP1
Module
(Sync in)
TZ1 to TZ6
TZ1 to TZ6
TZ1 to TZ6
EPWM1SYNCO
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 4-1. CPU-Timers 0, 1, 2 Configuration and Control Registers (continued)
NAME ADDRESS SIZE (x16) DESCRIPTION
Reserved 0x0C15 1 Reserved
TIMER2TPR 0x0C16 1 CPU-Timer 2, Prescale Register
TIMER2TPRH 0x0C17 1 CPU-Timer 2, Prescale Register High
0x0C18
Reserved 40 Reserved
0x0C3F
4.2 Enhanced PWM Modules (ePWM1/2/3/4/5/6)
The 280x device contains up to six enhanced PWM modules (ePWM). Figure 4-3 shows a block diagram
of multiple ePWM modules. Figure 4-4 shows the signal interconnections with the ePWM. See the
TMS320x280x, 2801x, 2804x Enhanced Pulse Width Modulator (ePWM) Module Reference Guide
(literature number SPRU791) for more details.
Figure 4-3. Multiple PWM Modules in a 280x System
Table 4-2 shows the complete ePWM register set per module.
54 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 4-2. ePWM Control and Status Registers
SIZE (x16) /
NAME ePWM1 ePWM2 ePWM3 ePWM4 ePWM5 ePWM6 DESCRIPTION
#SHADOW
TBCTL 0x6800 0x6840 0x6880 0x68C0 0x6900 0x6940 1 / 0 Time Base Control Register
TBSTS 0x6801 0x6841 0x6881 0x68C1 0x6901 0x6941 1 / 0 Time Base Status Register
TBPHSHR 0x6802 0x6842 0x6882 0x68C2 N/A N/A 1 / 0 Time Base Phase HRPWM Register
TBPHS 0x6803 0x6843 0x6883 0x68C3 0x6903 0x6943 1 / 0 Time Base Phase Register
TBCTR 0x6804 0x6844 0x6884 0x68C4 0x6904 0x6944 1 / 0 Time Base Counter Register
TBPRD 0x6805 0x6845 0x6885 0x68C5 0x6905 0x6945 1 / 1 Time Base Period Register Set
CMPCTL 0x6807 0x6847 0x6887 0x68C7 0x6907 0x6947 1 / 0 Counter Compare Control Register
CMPAHR 0x6808 0x6848 0x6888 0x68C8 N/A N/A 1 / 1 Time Base Compare A HRPWM Register
CMPA 0x6809 0x6849 0x6889 0x68C9 0x6909 0x6949 1 / 1 Counter Compare A Register Set
CMPB 0x680A 0x684A 0x688A 0x68CA 0x690A 0x694A 1 / 1 Counter Compare B Register Set
AQCTLA 0x680B 0x684B 0x688B 0x68CB 0x690B 0x694B 1 / 0 Action Qualifier Control Register For Output A
AQCTLB 0x680C 0x684C 0x688C 0x68CC 0x690C 0x694C 1 / 0 Action Qualifier Control Register For Output B
AQSFRC 0x680D 0x684D 0x688D 0x68CD 0x690D 0x694D 1 / 0 Action Qualifier Software Force Register
AQCSFRC 0x680E 0x684E 0x688E 0x68CE 0x690E 0x694E 1 / 1 Action Qualifier Continuous S/W Force Register Set
DBCTL 0x680F 0x684F 0x688F 0x68CF 0x690F 0x694F 1 / 1 Dead-Band Generator Control Register
DBRED 0x6810 0x6850 0x6890 0x68D0 0x6910 0x6950 1 / 0 Dead-Band Generator Rising Edge Delay Count Register
DBFED 0x6811 0x6851 0x6891 0x68D1 0x6911 0x6951 1 / 0 Dead-Band Generator Falling Edge Delay Count Register
TZSEL 0x6812 0x6852 0x6892 0x68D2 0x6912 0x6952 1 / 0 Trip Zone Select Register(1)
TZCTL 0x6814 0x6854 0x6894 0x68D4 0x6914 0x6954 1 / 0 Trip Zone Control Register(1)
TZEINT 0x6815 0x6855 0x6895 0x68D5 0x6915 0x6955 1 / 0 Trip Zone Enable Interrupt Register(1)
TZFLG 0x6816 0x6856 0x6896 0x68D6 0x6916 0x6956 1 / 0 Trip Zone Flag Register
TZCLR 0x6817 0x6857 0x6897 0x68D7 0x6917 0x6957 1 / 0 Trip Zone Clear Register(1)
TZFRC 0x6818 0x6858 0x6898 0x68D8 0x6918 0x6958 1 / 0 Trip Zone Force Register(1)
ETSEL 0x6819 0x6859 0x6899 0x68D9 0x6919 0x6959 1 / 0 Event Trigger Selection Register
ETPS 0x681A 0x685A 0x689A 0x68DA 0x691A 0x695A 1 / 0 Event Trigger Prescale Register
ETFLG 0x681B 0x685B 0x689B 0x68DB 0x691B 0x695B 1 / 0 Event Trigger Flag Register
ETCLR 0x681C 0x685C 0x689C 0x68DC 0x691C 0x695C 1 / 0 Event Trigger Clear Register
ETFRC 0x681D 0x685D 0x689D 0x68DD 0x691D 0x695D 1 / 0 Event Trigger Force Register
PCCTL 0x681E 0x685E 0x689E 0x68DE 0x691E 0x695E 1 / 0 PWM Chopper Control Register
HRCNFG 0x6820 0x6860 0x68A0 0x68E0 0x6920(2) 0x6960(2) 1 / 0 HRPWM Configuration Register(1)
(1) Registers that are EALLOW protected.
(2) Applicable to F2809 only
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 55
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
CTR = PRD
TBPRD Shadow (16)
TBPRD Active (16)
Counter
Up/Down
(16-Bit)
TBCNT
Active (16)
TBCTL[PHSEN]
TBCTL[SWFSYNC]
(Software-Forced Sync)
EPWMxSYNCI
CTR = ZERO
CTR_Dir
CTR = CMPB
Disabled
Sync
In/Out
Select
Mux
TBCTL[SYNCOSEL]
EPWMxSYNCO
TBPHS Active (24)
16 8
TBPHSHR (8)
Phase
Control
Time-Base (TB)
CTR = CMPA
CMPA Active (24)
16
CMPA Shadow (24)
Action
Qualifier
(AQ)
8
16
Counter Compare (CC)
CMPB Active (16)
CTR = CMPB
CMPB Shadow (16)
CMPAHR (8)
EPWMA
EPWMB
Dead
Band
(DB)
PWM
Chopper
(PC)
Trip
Zone
(TZ)
CTR = ZERO
EPWMxAO
EPWMxBO
EPWMxTZINT
TZ1 to TZ6
HiRes PWM (HRPWM)
CTR = PRD
CTR = ZERO
CTR = CMPB
CTR = CMPA
CTR_Dir
Event
Trigger
and
Interrupt
(ET)
EPWMxINT
EPWMxSOCA
EPWMxSOCB
CTR = ZERO
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-4. ePWM Sub-Modules Showing Critical Internal Signal Interconnections
56 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
4.3 Hi-Resolution PWM (HRPWM)
The HRPWM module offers PWM resolution (time granularity) which is significantly better than what can
be achieved using conventionally derived digital PWM methods. The key points for the HRPWM module
are:
Significantly extends the time resolution capabilities of conventionally derived digital PWM
Typically used when effective PWM resolution falls below ~ 9–10 bits. This occurs at PWM frequencies
greater than ~200 kHz when using a CPU/System clock of 100 MHz.
This capability can be utilized in both duty cycle and phase-shift control methods.
Finer time granularity control or edge positioning is controlled via extensions to the Compare A and
Phase registers of the ePWM module.
HRPWM capabilities are offered only on the A signal path of an ePWM module (that is, on the
EPWMxA output). EPWMxB output has conventional PWM capabilities.
4.4 Enhanced CAP Modules (eCAP1/2/3/4)
The 280x device contains up to four enhanced capture (eCAP) modules. Figure 4-5 shows a functional
block diagram of a module. See the TMS320x280x, 2801x, 2804x Enhanced Capture (eCAP) Module
Reference Guide (literature number SPRU807) for more details.
The eCAP modules are clocked at the SYSCLKOUT rate.
The clock enable bits (ECAP1/2/3/4ENCLK) in the PCLKCR1 register are used to turn off the eCAP
modules individually (for low power operation). Upon reset, ECAP1ENCLK, ECAP2ENCLK,
ECAP3ENCLK, and ECAP4ENCLK are set to low, indicating that the peripheral clock is off.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 57
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TSCTR
(Counter - 32-bit)
RST
CAP1
(APRD Active) LD
CAP2
(ACMP Active) LD
CAP3
(APRD Shadow) LD
CAP4
(ACMP Shadow) LD
Continuous/
One-Shot
Capture Control
LD1
LD2
LD3
LD4
32 PRD [0-31]
CTR [0-31]
eCAPx
MODE SELECT
Interrupt
Trigger
and
Flag
Control
to PIE
CTR=CMP
32
32
32
ACMP
Shadow
Event
Prescale
CTRPHS
(Phase Register - 32-bit)
SYNCOut
SYNCIn
SYNC
Event
Qualifier
Polarity
Select
Polarity
Select
Polarity
Select
Polarity
Select
CTR=PRD
CTR_OVF
4
PWM
Compare
Logic
CTR [0-31]
PRD [0-31]
CMP [0-31]
CTR=CMP
CTR=PRD
CTR_OVF
OVF
APWM Mode
Delta Mode
4
Capture Events
CEVT[1:4]
APRD
Shadow
32
32
32
32
32 CMP [0-31]
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-5. eCAP Functional Block Diagram
58 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 4-3. eCAP Control and Status Registers
SIZE
NAME eCAP1 eCAP2 eCAP3 eCAP4 DESCRIPTION
(x16)
TSCTR 0x6A00 0x6A20 0x6A40 0x6A60 2 Time-Stamp Counter
CTRPHS 0x6A02 0x6A22 0x6A42 0x6A62 2 Counter Phase Offset Value Register
CAP1 0x6A04 0x6A24 0x6A44 0x6A64 2 Capture 1 Register
CAP2 0x6A06 0x6A26 0x6A46 0x6A66 2 Capture 2 Register
CAP3 0x6A08 0x6A28 0x6A48 0x6A68 2 Capture 3 Register
CAP4 0x6A0A 0x6A2A 0x6A4A 0x6A6A 2 Capture 4 Register
Reserved 0x6A0C 0x6A2C 0x6A4C 0x6A6C 8 Reserved
0x6A12 0x6A32 0x6A52 0x6A72
ECCTL1 0x6A14 0x6A34 0x6A54 0x6A74 1 Capture Control Register 1
ECCTL2 0x6A15 0x6A35 0x6A55 0x6A75 1 Capture Control Register 2
ECEINT 0x6A16 0x6A36 0x6A56 0x6A76 1 Capture Interrupt Enable Register
ECFLG 0x6A17 0x6A37 0x6A57 0x6A77 1 Capture Interrupt Flag Register
ECCLR 0x6A18 0x6A38 0x6A58 0x6A78 1 Capture Interrupt Clear Register
ECFRC 0x6A19 0x6A39 0x6A59 0x6A79 1 Capture Interrupt Force Register
Reserved 0x6A1A 0x6A3A 0x6A5A 0x6A7A 6 Reserved
0x6A1F 0x6A3F 0x6A5F 0x6A7F
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 59
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
QWDTMR
QWDPRD
16
QWDOG
UTIME
QUPRD
QUTMR
32
UTOUT
WDTOUT
Quadrature
Capture
Unit
(QCAP)
QCPRDLAT
QCTMRLAT
16
QFLG
QEPSTS
QEPCTL
Registers
Used by
Multiple Units
QCLK
QDIR
QI
QS
PHE
PCSOUT
Quadrature
Decoder
(QDU)
QDECCTL
16
Position Counter/
Control Unit
(PCCU)
QPOSLAT
QPOSSLAT
16
QPOSILAT
EQEPxAIN
EQEPxBIN
EQEPxIIN
EQEPxIOUT
EQEPxIOE
EQEPxSIN
EQEPxSOUT
EQEPxSOE
GPIO
MUX
EQEPxA/XCLK
EQEPxB/XDIR
EQEPxS
EQEPxI
QPOSCMP QEINT
QFRC
32
QCLR
QPOSCTL
1632
QPOSCNT
QPOSMAX
QPOSINIT
PIE EQEPxINT
Enhanced QEP (eQEP) Peripheral
System Control
Registers
QCTMR
QCPRD
1616
QCAPCTL
EQEPxENCLK
SYSCLKOUT
To CPU
Data Bus
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
4.5 Enhanced QEP Modules (eQEP1/2)
The 280x device contains up to two enhanced quadrature encoder (eQEP) modules. See the
TMS320x280x, 2801x, 2804x Enhanced Quadrature Encoder Pulse (eQEP) Module Reference Guide
(literature number SPRU790) for more details.
Figure 4-6. eQEP Functional Block Diagram
60 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 4-4. eQEP Control and Status Registers
eQEP1
eQEP1 eQEP2
NAME SIZE(x16)/ REGISTER DESCRIPTION
ADDRESS ADDRESS #SHADOW
QPOSCNT 0x6B00 0x6B40 2/0 eQEP Position Counter
QPOSINIT 0x6B02 0x6B42 2/0 eQEP Initialization Position Count
QPOSMAX 0x6B04 0x6B44 2/0 eQEP Maximum Position Count
QPOSCMP 0x6B06 0x6B46 2/1 eQEP Position-compare
QPOSILAT 0x6B08 0x6B48 2/0 eQEP Index Position Latch
QPOSSLAT 0x6B0A 0x6B4A 2/0 eQEP Strobe Position Latch
QPOSLAT 0x6B0C 0x6B4C 2/0 eQEP Position Latch
QUTMR 0x6B0E 0x6B4E 2/0 eQEP Unit Timer
QUPRD 0x6B10 0x6B50 2/0 eQEP Unit Period Register
QWDTMR 0x6B12 0x6B52 1/0 eQEP Watchdog Timer
QWDPRD 0x6B13 0x6B53 1/0 eQEP Watchdog Period Register
QDECCTL 0x6B14 0x6B54 1/0 eQEP Decoder Control Register
QEPCTL 0x6B15 0x6B55 1/0 eQEP Control Register
QCAPCTL 0x6B16 0x6B56 1/0 eQEP Capture Control Register
QPOSCTL 0x6B17 0x6B57 1/0 eQEP Position-compare Control Register
QEINT 0x6B18 0x6B58 1/0 eQEP Interrupt Enable Register
QFLG 0x6B19 0x6B59 1/0 eQEP Interrupt Flag Register
QCLR 0x6B1A 0x6B5A 1/0 eQEP Interrupt Clear Register
QFRC 0x6B1B 0x6B5B 1/0 eQEP Interrupt Force Register
QEPSTS 0x6B1C 0x6B5C 1/0 eQEP Status Register
QCTMR 0x6B1D 0x6B5D 1/0 eQEP Capture Timer
QCPRD 0x6B1E 0x6B5E 1/0 eQEP Capture Period Register
QCTMRLAT 0x6B1F 0x6B5F 1/0 eQEP Capture Timer Latch
QCPRDLAT 0x6B20 0x6B60 1/0 eQEP Capture Period Latch
Reserved 0x6B21– 0x6B61 31/0 Reserved
0x6B3F 0x6B7F
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 61
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
0,ValueDigital =
V0inputwhen £
4095,ValueDigital =
V3inputwhen ³
V3inputV0when <<
3
ADCLOVoltageAnalogInput
4096ValueDigital -
´=
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
4.6 Enhanced Analog-to-Digital Converter (ADC) Module
A simplified functional block diagram of the ADC module is shown in Figure 4-7. The ADC module
consists of a 12-bit ADC with a built-in sample-and-hold (S/H) circuit. Functions of the ADC module
include:
12-bit ADC core with built-in S/H
Analog input: 0.0 V to 3.0 V (Voltages above 3.0 V produce full-scale conversion results.)
Fast conversion rate: Up to 80 ns at 25-MHz ADC clock, 12.5 MSPS
16-channel, MUXed inputs
Autosequencing capability provides up to 16 "autoconversions" in a single session. Each conversion
can be programmed to select anyone of 16 input channels
Sequencer can be operated as two independent 8-channel sequencers or as one large 16-channel
sequencer (that is, two cascaded 8-channel sequencers)
Sixteen result registers (individually addressable) to store conversion values
The digital value of the input analog voltage is derived by:
A. All fractional values are truncated.
Multiple triggers as sources for the start-of-conversion (SOC) sequence
S/W - software immediate start
ePWM start of conversion
XINT2 ADC start of conversion
Flexible interrupt control allows interrupt request on every end-of-sequence (EOS) or every other EOS.
Sequencer can operate in "start/stop" mode, allowing multiple "time-sequenced triggers" to
synchronize conversions.
SOCA and SOCB triggers can operate independently in dual-sequencer mode.
Sample-and-hold (S/H) acquisition time window has separate prescale control.
The ADC module in the 280x has been enhanced to provide flexible interface to ePWM peripherals. The
ADC interface is built around a fast, 12-bit ADC module with a fast conversion rate of up to 80 ns at 25-
MHz ADC clock. The ADC module has a 16-channel sequencer, configurable as two independent 8-
channel sequencers. The two independent 8-channel sequencers can be cascaded to form a 16-channel
sequencer. Although there are multiple input channels and two sequencers, there is only one converter in
the ADC module. Figure 4-7 shows the block diagram of the ADC module.
The two 8-channel sequencer modules have the capability to autosequence a series of conversions, each
module has the choice of selecting any one of the respective eight channels available through an analog
MUX. In the cascaded mode, the autosequencer functions as a single 16-channel sequencer. On each
sequencer, once the conversion is complete, the selected channel value is stored in its respective
RESULT register. Autosequencing allows the system to convert the same channel multiple times, allowing
the user to perform oversampling algorithms. This gives increased resolution over traditional single-
sampled conversion results.
62 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Result Registers
EPWMSOCB
S/W
ADC Control Registers
70B7h
70B0h
70AFh
70A8h
Result Reg 15
Result Reg 8
Result Reg 7
Result Reg 1
Result Reg 0
12-Bit
ADC
Module
Analog
MUX
EPWMSOCA
S/W
GPIO/XINT2_
ADCSOC
ADCINA0
ADCINA7
ADCINB0
ADCINB7
System
Control Block
High-Speed
Prescaler
HSPCLK
ADCENCLK
DSP
SYSCLKOUT
S/H
S/H
HALT
Sequencer 2Sequencer 1 SOCSOC
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 4-7. Block Diagram of the ADC Module
To obtain the specified accuracy of the ADC, proper board layout is very critical. To the best extent
possible, traces leading to the ADCIN pins should not run in close proximity to the digital signal paths.
This is to minimize switching noise on the digital lines from getting coupled to the ADC inputs.
Furthermore, proper isolation techniques must be used to isolate the ADC module power pins (VDD1A18,
VDD2A18, VDDA2, VDDAIO) from the digital supply. Figure 4-8 and Figure 4-9 show the ADC pin connections
for the 280x devices.
NOTE
1. The ADC registers are accessed at the SYSCLKOUT rate. The internal timing of the
ADC module is controlled by the high-speed peripheral clock (HSPCLK).
2. The behavior of the ADC module based on the state of the ADCENCLK and HALT
signals is as follows:
ADCENCLK: On reset, this signal will be low. While reset is active-low (XRS) the
clock to the register will still function. This is necessary to make sure all registers and
modes go into their default reset state. The analog module, however, will be in a low-
power inactive state. As soon as reset goes high, then the clock to the registers will
be disabled. When the user sets the ADCENCLK signal high, then the clocks to the
registers will be enabled and the analog module will be enabled. There will be a
certain time delay (ms range) before the ADC is stable and can be used.
HALT: This mode only affects the analog module. It does not affect the registers. In
this mode, the ADC module goes into low-power mode. This mode also will stop the
clock to the CPU, which will stop the HSPCLK; therefore, the ADC register logic will
be turned off indirectly.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 63
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ADCINA[7:0]
ADCINB[7:0]
ADCLO
ADCREFIN
ADCRESEXT
ADCREFP
VDD1A18
VDD2A18
VSS1AGND
VSS2AGND
VDDAIO
VSSAIO
VDDA2
VSSA2
ADCREFM
Analog input 0-3 V with respect to ADCLO
Connect to analog ground
ADC Analog Power Pin (1.8 V)
ADC Analog Power Pin (1.8 V)
ADC Analog Power Pin (3.3 V)
ADC Analog I/O Ground Pin
ADC Analog Power Pin (3.3 V)
ADCREFP and ADCREFM should not
be loaded by external circuitry
ADC Analog Ground Pin
ADC External Current Bias Resistor
ADC Reference Positive Output
ADC Reference Medium Output
ADC Power
ADC Analog and Reference I/O Power
ADC 16-Channel Analog Inputs
Float or ground if internal reference is used
ADC Analog Ground Pin
ADC Analog Ground Pin
22 k
2.2 Fμ (A)
2.2 Fμ (A)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-8 shows the ADC pin-biasing for internal reference and Figure 4-9 shows the ADC pin-biasing for
external reference.
A. TAIYO YUDEN LMK212BJ225MG-T or equivalent
B. External decoupling capacitors are recommended on all power pins.
C. Analog inputs must be driven from an operational amplifier that does not degrade the ADC performance.
Figure 4-8. ADC Pin Connections With Internal Reference
64 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ADCINA[7:0]
ADCINB[7:0]
ADCLO
ADCREFIN
ADC External Current Bias Resistor ADCRESEXT
ADCREFP
VDD1A18
VDD2A18
VSS1AGND
VSS2AGND
VDDAIO
VSSAIO
VDDA2
VSSA2
ADC Reference Positive Output
ADCREFM
ADC Reference Medium Output
ADC Analog Power
ADC Analog and Reference I/O Power
Analog input 0-3 V with respect to ADCLO
Connect to Analog Ground
ADCREFP and ADCREFM should not
be loaded by external circuitry
ADC 16-Channel Analog Inputs
Connect to 1.500, 1.024, or 2.048-V precision source(D)
ADC Analog Power Pin (1.8 V)
ADC Analog Power Pin (1.8 V)
ADC Analog I/O Ground Pin
ADC Analog Power Pin (3.3 V)
ADC Analog Ground Pin
ADC Analog Ground Pin
ADC Analog Ground Pin
ADC Analog Power Pin (3.3 V)
22 k
2.2 Fμ (A)
2.2 Fμ (A)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
A. TAIYO YUDEN LMK212BJ225MG-T or equivalent
B. External decoupling capacitors are recommended on all power pins.
C. Analog inputs must be driven from an operational amplifier that does not degrade the ADC performance.
D. External voltage on ADCREFIN is enabled by changing bits 15:14 in the ADC Reference Select register depending on
the voltage used on this pin. TI recommends TI part REF3020 or equivalent for 2.048-V generation. Overall gain
accuracy will be determined by accuracy of this voltage source.
Figure 4-9. ADC Pin Connections With External Reference
NOTE
The temperature rating of any recommended component must match the rating of the end
product.
4.6.1 ADC Connections if the ADC Is Not Used
It is recommended to keep the connections for the analog power pins, even if the ADC is not used.
Following is a summary of how the ADC pins should be connected, if the ADC is not used in an
application:
VDD1A18/VDD2A18 Connect to VDD
VDDA2, VDDAIO Connect to VDDIO
VSS1AGND/VSS2AGND, VSSA2, VSSAIO Connect to VSS
ADCLO Connect to VSS
ADCREFIN Connect to VSS
ADCREFP/ADCREFM Connect a 100-nF cap to VSS
ADCRESEXT Connect a 20-kresistor (very loose tolerance) to VSS.
ADCINAn, ADCINBn - Connect to VSS
When the ADC is not used, be sure that the clock to the ADC module is not turned on to realize power
savings.
When the ADC module is used in an application, unused ADC input pins should be connected to analog
ground (VSS1AGND/VSS2AGND)
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 65
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
4.6.2 ADC Registers
The ADC operation is configured, controlled, and monitored by the registers listed in Table 4-5.
Table 4-5. ADC Registers(1)
NAME ADDRESS(1) ADDRESS(2) SIZE (x16) DESCRIPTION
ADCTRL1 0x7100 1 ADC Control Register 1
ADCTRL2 0x7101 1 ADC Control Register 2
ADCMAXCONV 0x7102 1 ADC Maximum Conversion Channels Register
ADCCHSELSEQ1 0x7103 1 ADC Channel Select Sequencing Control Register 1
ADCCHSELSEQ2 0x7104 1 ADC Channel Select Sequencing Control Register 2
ADCCHSELSEQ3 0x7105 1 ADC Channel Select Sequencing Control Register 3
ADCCHSELSEQ4 0x7106 1 ADC Channel Select Sequencing Control Register 4
ADCASEQSR 0x7107 1 ADC Auto-Sequence Status Register
ADCRESULT0 0x7108 0x0B00 1 ADC Conversion Result Buffer Register 0
ADCRESULT1 0x7109 0x0B01 1 ADC Conversion Result Buffer Register 1
ADCRESULT2 0x710A 0x0B02 1 ADC Conversion Result Buffer Register 2
ADCRESULT3 0x710B 0x0B03 1 ADC Conversion Result Buffer Register 3
ADCRESULT4 0x710C 0x0B04 1 ADC Conversion Result Buffer Register 4
ADCRESULT5 0x710D 0x0B05 1 ADC Conversion Result Buffer Register 5
ADCRESULT6 0x710E 0x0B06 1 ADC Conversion Result Buffer Register 6
ADCRESULT7 0x710F 0x0B07 1 ADC Conversion Result Buffer Register 7
ADCRESULT8 0x7110 0x0B08 1 ADC Conversion Result Buffer Register 8
ADCRESULT9 0x7111 0x0B09 1 ADC Conversion Result Buffer Register 9
ADCRESULT10 0x7112 0x0B0A 1 ADC Conversion Result Buffer Register 10
ADCRESULT11 0x7113 0x0B0B 1 ADC Conversion Result Buffer Register 11
ADCRESULT12 0x7114 0x0B0C 1 ADC Conversion Result Buffer Register 12
ADCRESULT13 0x7115 0x0B0D 1 ADC Conversion Result Buffer Register 13
ADCRESULT14 0x7116 0x0B0E 1 ADC Conversion Result Buffer Register 14
ADCRESULT15 0x7117 0x0B0F 1 ADC Conversion Result Buffer Register 15
ADCTRL3 0x7118 1 ADC Control Register 3
ADCST 0x7119 1 ADC Status Register
0x711A
Reserved 2 Reserved
0x711B
ADCREFSEL 0x711C 1 ADC Reference Select Register
ADCOFFTRIM 0x711D 1 ADC Offset Trim Register
0x711E
Reserved 2 Reserved
0x711F
(1) The registers in this column are Peripheral Frame 2 Registers.
(2) The ADC result registers are dual mapped in the 280x DSP. Locations in Peripheral Frame 2 (0x7108-0x7117) are 2 wait-states and left
justified. Locations in Peripheral frame 0 space (0x0B00-0x0B0F) are 0 wait sates and right justified. During high-speed/continuous
conversion use of the ADC, use the 0 wait-state locations for fast transfer of ADC results to user memory.
66 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
4.7 Enhanced Controller Area Network (eCAN) Modules (eCAN-A and eCAN-B)
The CAN module has the following features:
Fully compliant with CAN protocol, version 2.0B
Supports data rates up to 1 Mbps
Thirty-two mailboxes, each with the following properties:
Configurable as receive or transmit
Configurable with standard or extended identifier
Has a programmable receive mask
Supports data and remote frame
Composed of 0 to 8 bytes of data
Uses a 32-bit time stamp on receive and transmit message
Protects against reception of new message
Holds the dynamically programmable priority of transmit message
Employs a programmable interrupt scheme with two interrupt levels
Employs a programmable alarm on transmission or reception time-out
Low-power mode
Programmable wake-up on bus activity
Automatic reply to a remote request message
Automatic retransmission of a frame in case of loss of arbitration or error
32-bit local network time counter synchronized by a specific message (communication in conjunction
with mailbox 16)
Self-test mode
Operates in a loopback mode receiving its own message. A "dummy" acknowledge is provided,
thereby eliminating the need for another node to provide the acknowledge bit.
NOTE
For a SYSCLKOUT of 100 MHz, the smallest bit rate possible is 15.625 kbps.
For a SYSCLKOUT of 60 MHz, the smallest bit rate possible is 9.375 kbps.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 67
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Mailbox RAM
(512 Bytes)
32-Message Mailbox
of 4 x 32-Bit Words
Memory Management
Unit
CPU Interface,
Receive Control Unit,
Timer Management Unit
eCAN Memory
(512 Bytes)
Registers and
Message Objects Control
Message Controller
32 32
eCAN Protocol Kernel
Receive Buffer
Transmit Buffer
Control Buffer
Status Buffer
Enhanced CAN Controller 32
Controls Address Data
eCAN1INTeCAN0INT
32
SN65HVD23x
3.3-V CAN Transceiver
CAN Bus
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-10. eCAN Block Diagram and Interface Circuit
Table 4-6. 3.3-V eCAN Transceivers
SUPPLY LOW-POWER SLOPE
PART NUMBER VREF OTHER TA
VOLTAGE MODE CONTROL
SN65HVD230 3.3 V Standby Adjustable Yes –40°C to 85°C
SN65HVD230Q 3.3 V Standby Adjustable Yes –40°C to 125°C
SN65HVD231 3.3 V Sleep Adjustable Yes –40°C to 85°C
SN65HVD231Q 3.3 V Sleep Adjustable Yes –40°C to 125°C
SN65HVD232 3.3 V None None None –40°C to 85°C
SN65HVD232Q 3.3 V None None None –40°C to 125°C
SN65HVD233 3.3 V Standby Adjustable None Diagnostic –40°C to 125°C
Loopback
SN65HVD234 3.3 V Standby & Sleep Adjustable None –40°C to 125°C
SN65HVD235 3.3 V Standby Adjustable None Autobaud –40°C to 125°C
Loopback
68 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Mailbox Enable - CANME
Mailbox Direction - CANMD
Transmission Request Set - CANTRS
Transmission Request Reset - CANTRR
Transmission Acknowledge - CANTA
Abort Acknowledge - CANAA
Received Message Pending - CANRMP
Received Message Lost - CANRML
Remote Frame Pending - CANRFP
Global Acceptance Mask - CANGAM
Master Control - CANMC
Bit-Timing Configuration - CANBTC
Error and Status - CANES
Transmit Error Counter - CANTEC
Receive Error Counter - CANREC
Global Interrupt Flag 0 - CANGIF0
Global Interrupt Mask - CANGIM
Mailbox Interrupt Mask - CANMIM
Mailbox Interrupt Level - CANMIL
Overwrite Protection Control - CANOPC
TX I/O Control - CANTIOC
RX I/O Control - CANRIOC
Time Stamp Counter - CANTSC
Global Interrupt Flag 1 - CANGIF1
Time-Out Control - CANTOC
Time-Out Status - CANTOS
Reserved
eCAN-A Control and Status Registers
Message Identifier - MSGID
61E8h-61E9h
Message Control - MSGCTRL
Message Data Low - MDL
Message Data High - MDH
Message Mailbox (16 Bytes)
Control and Status Registers
6000h
603Fh
Local Acceptance Masks (LAM)
(32 x 32-Bit RAM)
6040h
607Fh
6080h
60BFh
60C0h
60FFh
eCAN-A Memory (512 Bytes)
Message Object Time Stamps (MOTS)
(32 x 32-Bit RAM)
Message Object Time-Out (MOTO)
(32 x 32-Bit RAM)
Mailbox 06100h-6107h
Mailbox 1
6108h-610Fh
Mailbox 2
6110h-6117h
Mailbox 3
6118h-611Fh
eCAN-A Memory RAM (512 Bytes)
Mailbox 4
6120h-6127h
Mailbox 28
61E0h-61E7h
Mailbox 2961E8h-61EFh
Mailbox 3061F0h-61F7h
Mailbox 31
61F8h-61FFh
61EAh-61EBh
61ECh-61EDh
61EEh-61EFh
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 4-11. eCAN-A Memory Map
NOTE
If the eCAN module is not used in an application, the RAM available (LAM, MOTS, MOTO,
and mailbox RAM) can be used as general-purpose RAM. The CAN module clock should be
enabled for this.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 69
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Mailbox Enable - CANME
Mailbox Direction - CANMD
Transmission Request Set - CANTRS
Transmission Request Reset - CANTRR
Transmission Acknowledge - CANTA
Abort Acknowledge - CANAA
Received Message Pending - CANRMP
Received Message Lost - CANRML
Remote Frame Pending - CANRFP
Global Acceptance Mask - CANGAM
Master Control - CANMC
Bit-Timing Configuration - CANBTC
Error and Status - CANES
Transmit Error Counter - CANTEC
Receive Error Counter - CANREC
Global Interrupt Flag 0 - CANGIF0
Global Interrupt Mask - CANGIM
Mailbox Interrupt Mask - CANMIM
Mailbox Interrupt Level - CANMIL
Overwrite Protection Control - CANOPC
TX I/O Control - CANTIOC
RX I/O Control - CANRIOC
Time Stamp Counter - CANTSC
Global Interrupt Flag 1 - CANGIF1
Time-Out Control - CANTOC
Time-Out Status - CANTOS
Reserved
eCAN-B Control and Status Registers
Message Identifier - MSGID
63E8h-63E9h
Message Control - MSGCTRL
Message Data Low - MDL
Message Data High - MDH
Message Mailbox (16 Bytes)
Control and Status Registers
6200h
623Fh
Local Acceptance Masks (LAM)
(32 x 32-Bit RAM)
6240h
627Fh
6280h
62BFh
62C0h
62FFh
eCAN-B Memory (512 Bytes)
Message Object Time Stamps (MOTS)
(32 x 32-Bit RAM)
Message Object Time-Out (MOTO)
(32 x 32-Bit RAM)
Mailbox 06300h-6307h
Mailbox 1
6308h-630Fh
Mailbox 2
6310h-6317h
Mailbox 3
6318h-631Fh
eCAN-B Memory RAM (512 Bytes)
Mailbox 4
6320h-6327h
Mailbox 28
63E0h-63E7h
Mailbox 2963E8h-63EFh
Mailbox 3063F0h-63F7h
Mailbox 31
63F8h-63FFh
63EAh-63EBh
63ECh-63EDh
63EEh-63EFh
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-12. eCAN-B Memory Map
70 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
The CAN registers listed in Table 4-7 are used by the CPU to configure and control the CAN controller
and the message objects. eCAN control registers only support 32-bit read/write operations. Mailbox RAM
can be accessed as 16 bits or 32 bits. 32-bit accesses are aligned to an even boundary.
Table 4-7. CAN Register Map(1)
eCAN-A eCAN-B SIZE
REGISTER NAME DESCRIPTION
ADDRESS ADDRESS (x32)
CANME 0x6000 0x6200 1 Mailbox enable
CANMD 0x6002 0x6202 1 Mailbox direction
CANTRS 0x6004 0x6204 1 Transmit request set
CANTRR 0x6006 0x6206 1 Transmit request reset
CANTA 0x6008 0x6208 1 Transmission acknowledge
CANAA 0x600A 0x620A 1 Abort acknowledge
CANRMP 0x600C 0x620C 1 Receive message pending
CANRML 0x600E 0x620E 1 Receive message lost
CANRFP 0x6010 0x6210 1 Remote frame pending
CANGAM 0x6012 0x6212 1 Global acceptance mask
CANMC 0x6014 0x6214 1 Master control
CANBTC 0x6016 0x6216 1 Bit-timing configuration
CANES 0x6018 0x6218 1 Error and status
CANTEC 0x601A 0x621A 1 Transmit error counter
CANREC 0x601C 0x621C 1 Receive error counter
CANGIF0 0x601E 0x621E 1 Global interrupt flag 0
CANGIM 0x6020 0x6220 1 Global interrupt mask
CANGIF1 0x6022 0x6222 1 Global interrupt flag 1
CANMIM 0x6024 0x6224 1 Mailbox interrupt mask
CANMIL 0x6026 0x6226 1 Mailbox interrupt level
CANOPC 0x6028 0x6228 1 Overwrite protection control
CANTIOC 0x602A 0x622A 1 TX I/O control
CANRIOC 0x602C 0x622C 1 RX I/O control
CANTSC 0x602E 0x622E 1 Time stamp counter (Reserved in SCC mode)
CANTOC 0x6030 0x6230 1 Time-out control (Reserved in SCC mode)
CANTOS 0x6032 0x6232 1 Time-out status (Reserved in SCC mode)
(1) These registers are mapped to Peripheral Frame 1.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 71
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
devices)MHz-60(forb/s
10
3.75
16
MHz60
ratebitMax 6
´==
devices)MHz-100(forb/s
10
6.25
16
MHz100
ratebitMax 6
´==
8*1)(BRR
LSPCLK
rateBaud +
=
0BRRwhen ¹
16
LSPCLK
rateBaud =
0BRRwhen =
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
4.8 Serial Communications Interface (SCI) Modules (SCI-A, SCI-B)
The 280x devices include two serial communications interface (SCI) modules. The SCI modules support
digital communications between the CPU and other asynchronous peripherals that use the standard non-
return-to-zero (NRZ) format. The SCI receiver and transmitter are double-buffered, and each has its own
separate enable and interrupt bits. Both can be operated independently or simultaneously in the full-
duplex mode. To ensure data integrity, the SCI checks received data for break detection, parity, overrun,
and framing errors. The bit rate is programmable to over 65000 different speeds through a 16-bit baud-
select register.
Features of each SCI module include:
Two external pins:
SCITXD: SCI transmit-output pin
SCIRXD: SCI receive-input pin
NOTE: Both pins can be used as GPIO if not used for SCI.
Baud rate programmable to 64K different rates:
Data-word format
One start bit
Data-word length programmable from one to eight bits
Optional even/odd/no parity bit
One or two stop bits
Four error-detection flags: parity, overrun, framing, and break detection
Two wake-up multiprocessor modes: idle-line and address bit
Half- or full-duplex operation
Double-buffered receive and transmit functions
Transmitter and receiver operations can be accomplished through interrupt-driven or polled algorithms
with status flags.
Transmitter: TXRDY flag (transmitter-buffer register is ready to receive another character) and TX
EMPTY flag (transmitter-shift register is empty)
Receiver: RXRDY flag (receiver-buffer register is ready to receive another character), BRKDT flag
(break condition occurred), and RX ERROR flag (monitoring four interrupt conditions)
Separate enable bits for transmitter and receiver interrupts (except BRKDT)
NRZ (non-return-to-zero) format
Ten SCI module control registers located in the control register frame beginning at address 7050h
NOTE
All registers in this module are 8-bit registers that are connected to Peripheral Frame 2.
When a register is accessed, the register data is in the lower byte (7–0), and the upper byte
(15–8) is read as zeros. Writing to the upper byte has no effect.
72 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Enhanced features:
Auto baud-detect hardware logic
16-level transmit/receive FIFO
The SCI port operation is configured and controlled by the registers listed in Table 4-8 and Table 4-9.
Table 4-8. SCI-A Registers(1)
NAME ADDRESS SIZE (x16) DESCRIPTION
SCICCRA 0x7050 1 SCI-A Communications Control Register
SCICTL1A 0x7051 1 SCI-A Control Register 1
SCIHBAUDA 0x7052 1 SCI-A Baud Register, High Bits
SCILBAUDA 0x7053 1 SCI-A Baud Register, Low Bits
SCICTL2A 0x7054 1 SCI-A Control Register 2
SCIRXSTA 0x7055 1 SCI-A Receive Status Register
SCIRXEMUA 0x7056 1 SCI-A Receive Emulation Data Buffer Register
SCIRXBUFA 0x7057 1 SCI-A Receive Data Buffer Register
SCITXBUFA 0x7059 1 SCI-A Transmit Data Buffer Register
SCIFFTXA(2) 0x705A 1 SCI-A FIFO Transmit Register
SCIFFRXA(2) 0x705B 1 SCI-A FIFO Receive Register
SCIFFCTA(2) 0x705C 1 SCI-A FIFO Control Register
SCIPRIA 0x705F 1 SCI-A Priority Control Register
(1) Registers in this table are mapped to Peripheral Frame 2 space. This space only allows 16-bit accesses. 32-bit accesses produce
undefined results.
(2) These registers are new registers for the FIFO mode.
Table 4-9. SCI-B Registers(1) (2)
NAME ADDRESS SIZE (x16) DESCRIPTION
SCICCRB 0x7750 1 SCI-B Communications Control Register
SCICTL1B 0x7751 1 SCI-B Control Register 1
SCIHBAUDB 0x7752 1 SCI-B Baud Register, High Bits
SCILBAUDB 0x7753 1 SCI-B Baud Register, Low Bits
SCICTL2B 0x7754 1 SCI-B Control Register 2
SCIRXSTB 0x7755 1 SCI-B Receive Status Register
SCIRXEMUB 0x7756 1 SCI-B Receive Emulation Data Buffer Register
SCIRXBUFB 0x7757 1 SCI-B Receive Data Buffer Register
SCITXBUFB 0x7759 1 SCI-B Transmit Data Buffer Register
SCIFFTXB(2) 0x775A 1 SCI-B FIFO Transmit Register
SCIFFRXB(2) 0x775B 1 SCI-B FIFO Receive Register
SCIFFCTB(2) 0x775C 1 SCI-B FIFO Control Register
SCIPRIB 0x775F 1 SCI-B Priority Control Register
(1) Registers in this table are mapped to peripheral bus 16 space. This space only allows 16-bit accesses. 32-bit accesses produce
undefined results.
(2) These registers are new registers for the FIFO mode.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 73
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
LSPCLK
Frame Format and Mode
Even/Odd Enable
Parity
8
SCIRXD
SCIRXST.1
TXENA
RXWAKE
SCITXD
SCICCR.6 SCICCR.5
RXSHF Register
SCITXD
TXSHF
Register
WUT
SCICTL1.3
TXWAKE
1
Baud Rate
MSbyte
Register
Baud Rate
LSbyte
Register
SCIHBAUD. 15 - 8
SCILBAUD. 7 - 0
TX
FIFO
Interrupts
RXENA
SCICTL1.0
RX
FIFO
Interrupts
SCICTL1.1
SCIRXD
RX ERR INT ENA
SCICTL1.6
RX Error
PEFE OE
RX Error
SCIRXST.7 SCIRXST.4 - 2
8
SCITXBUF.7-0
TX FIFO Registers
Transmitter-Data
Buffer Register
8
SCIFFENA
TX FIFO _15
- - - - -
TX FIFO _1
TX FIFO _0
SCIFFTX.14
SCIRXBUF.7-0
RX FIFO Registers
Receive-Data
Buffer Register
SCIRXBUF.7-0
8
SCIFFRX.15
RXFFOVF
RX FIFO _0
- - - - -
RX FIFO _1
RX FIFO _15
SCI TX Interrupt Select Logic
TX EMPTY
SCICTL2.6
TXINT
TXRDY
SCICTL2.0
TX INT ENA
SCICTL2.7
To CPU
AutoBaud Detect Logic
TX Interrupt Logic
RX Interrupt Logic
SCI RX Interrupt Select Logic
RXRDY
SCIRXST.6
BRKDT
SCIRXST.5
RX/BK INT ENA
SCICTL2.1
RXINT
To CPU
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-13 shows the SCI module block diagram.
Figure 4-13. Serial Communications Interface (SCI) Module Block Diagram
74 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
1)(SPIBRR
LSPCLK
rateBaud +
=
127to3SPIBRRwhen =
4
LSPCLK
rateBaud =
21,0,SPIBRRwhen =
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
4.9 Serial Peripheral Interface (SPI) Modules (SPI-A, SPI-B, SPI-C, SPI-D)
The 280x devices include the four-pin serial peripheral interface (SPI) module. Up to four SPI modules
(SPI-A, SPI-B, SPI-C, and SPI-D) are available. The SPI is a high-speed, synchronous serial I/O port that
allows a serial bit stream of programmed length (one to sixteen bits) to be shifted into and out of the
device at a programmable bit-transfer rate. Normally, the SPI is used for communications between the
DSP controller and external peripherals or another processor. Typical applications include external I/O or
peripheral expansion through devices such as shift registers, display drivers, and ADCs. Multidevice
communications are supported by the master/slave operation of the SPI.
The SPI module features include:
Four external pins:
SPISOMI: SPI slave-output/master-input pin
SPISIMO: SPI slave-input/master-output pin
SPISTE: SPI slave transmit-enable pin
SPICLK: SPI serial-clock pin
NOTE: All four pins can be used as GPIO, if the SPI module is not used.
Two operational modes: master and slave
Baud rate: 125 different programmable rates.
Data word length: one to sixteen data bits
Four clocking schemes (controlled by clock polarity and clock phase bits) include:
Falling edge without phase delay: SPICLK active-high. SPI transmits data on the falling edge of the
SPICLK signal and receives data on the rising edge of the SPICLK signal.
Falling edge with phase delay: SPICLK active-high. SPI transmits data one half-cycle ahead of the
falling edge of the SPICLK signal and receives data on the falling edge of the SPICLK signal.
Rising edge without phase delay: SPICLK inactive-low. SPI transmits data on the rising edge of the
SPICLK signal and receives data on the falling edge of the SPICLK signal.
Rising edge with phase delay: SPICLK inactive-low. SPI transmits data one half-cycle ahead of the
falling edge of the SPICLK signal and receives data on the rising edge of the SPICLK signal.
Simultaneous receive and transmit operation (transmit function can be disabled in software)
Transmitter and receiver operations are accomplished through either interrupt-driven or polled
algorithms.
Nine SPI module control registers: Located in control register frame beginning at address 7040h.
NOTE
All registers in this module are 16-bit registers that are connected to Peripheral Frame 2.
When a register is accessed, the register data is in the lower byte (7–0), and the upper byte
(15–8) is read as zeros. Writing to the upper byte has no effect.
Enhanced feature:
16-level transmit/receive FIFO
Delayed transmit control
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 75
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
The SPI port operation is configured and controlled by the registers listed in Table 4-10 through Table 4-
13.
Table 4-10. SPI-A Registers
NAME ADDRESS SIZE (x16) DESCRIPTION(1)
SPICCR 0x7040 1 SPI-A Configuration Control Register
SPICTL 0x7041 1 SPI-A Operation Control Register
SPISTS 0x7042 1 SPI-A Status Register
SPIBRR 0x7044 1 SPI-A Baud Rate Register
SPIRXEMU 0x7046 1 SPI-A Receive Emulation Buffer Register
SPIRXBUF 0x7047 1 SPI-A Serial Input Buffer Register
SPITXBUF 0x7048 1 SPI-A Serial Output Buffer Register
SPIDAT 0x7049 1 SPI-A Serial Data Register
SPIFFTX 0x704A 1 SPI-A FIFO Transmit Register
SPIFFRX 0x704B 1 SPI-A FIFO Receive Register
SPIFFCT 0x704C 1 SPI-A FIFO Control Register
SPIPRI 0x704F 1 SPI-A Priority Control Register
(1) Registers in this table are mapped to Peripheral Frame 2. This space only allows 16-bit accesses. 32-bit accesses produce undefined
results.
Table 4-11. SPI-B Registers
NAME ADDRESS SIZE (x16) DESCRIPTION(1)
SPICCR 0x7740 1 SPI-B Configuration Control Register
SPICTL 0x7741 1 SPI-B Operation Control Register
SPISTS 0x7742 1 SPI-B Status Register
SPIBRR 0x7744 1 SPI-B Baud Rate Register
SPIRXEMU 0x7746 1 SPI-B Receive Emulation Buffer Register
SPIRXBUF 0x7747 1 SPI-B Serial Input Buffer Register
SPITXBUF 0x7748 1 SPI-B Serial Output Buffer Register
SPIDAT 0x7749 1 SPI-B Serial Data Register
SPIFFTX 0x774A 1 SPI-B FIFO Transmit Register
SPIFFRX 0x774B 1 SPI-B FIFO Receive Register
SPIFFCT 0x774C 1 SPI-B FIFO Control Register
SPIPRI 0x774F 1 SPI-B Priority Control Register
(1) Registers in this table are mapped to Peripheral Frame 2. This space only allows 16-bit accesses. 32-bit accesses produce undefined
results.
76 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 4-12. SPI-C Registers
NAME ADDRESS SIZE (x16) DESCRIPTION(1)
SPICCR 0x7760 1 SPI-C Configuration Control Register
SPICTL 0x7761 1 SPI-C Operation Control Register
SPISTS 0x7762 1 SPI-C Status Register
SPIBRR 0x7764 1 SPI-C Baud Rate Register
SPIRXEMU 0x7766 1 SPI-C Receive Emulation Buffer Register
SPIRXBUF 0x7767 1 SPI-C Serial Input Buffer Register
SPITXBUF 0x7768 1 SPI-C Serial Output Buffer Register
SPIDAT 0x7769 1 SPI-C Serial Data Register
SPIFFTX 0x776A 1 SPI-C FIFO Transmit Register
SPIFFRX 0x776B 1 SPI-C FIFO Receive Register
SPIFFCT 0x776C 1 SPI-C FIFO Control Register
SPIPRI 0x776F 1 SPI-C Priority Control Register
(1) Registers in this table are mapped to Peripheral Frame 2. This space only allows 16-bit accesses. 32-bit accesses produce undefined
results.
Table 4-13. SPI-D Registers
NAME ADDRESS SIZE (x16) DESCRIPTION(1)
SPICCR 0x7780 1 SPI-D Configuration Control Register
SPICTL 0x7781 1 SPI-D Operation Control Register
SPISTS 0x7782 1 SPI-D Status Register
SPIBRR 0x7784 1 SPI-D Baud Rate Register
SPIRXEMU 0x7786 1 SPI-D Receive Emulation Buffer Register
SPIRXBUF 0x7787 1 SPI-D Serial Input Buffer Register
SPITXBUF 0x7788 1 SPI-D Serial Output Buffer Register
SPIDAT 0x7789 1 SPI-D Serial Data Register
SPIFFTX 0x778A 1 SPI-D FIFO Transmit Register
SPIFFRX 0x778B 1 SPI-D FIFO Receive Register
SPIFFCT 0x778C 1 SPI-D FIFO Control Register
SPIPRI 0x778F 1 SPI-D Priority Control Register
(1) Registers in this table are mapped to Peripheral Frame 2. This space only allows 16-bit accesses. 32-bit accesses produce undefined
results.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 77
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
S
S
LSPCLK
456 123 0
0123
SPI Bit Rate
State Control
SPICCR.3 - 0
SPIBRR.6 - 0
Clock
Polarity
SPICCR.6
Clock
Phase
SPICTL.3
Talk
SPICTL.1
M
S
M
M
S
Master/Slave
SPICTL.2
SPI Char
SPISIMO
SPISOMI
SPICLK
SW2
S
M
M
S
SW3
To CPU
M
SW1
SPIDAT.15 - 0
16
16
SPITXINT
TX
FIFO
Interrupt
RX
FIFO
Interrupt
SPISTE(A)
RX FIFO Registers
SPIRXBUF
SPIFFTX.14
SPIFFENA
RX FIFO _15
- - - - -
RX FIFO _1
RX FIFO _0
TX FIFO Registers
SPITXBUF
- - - - -
TX FIFO _15
TX FIFO _0
TX FIFO _1
16
SPITXBUF Buffer Register
SPIRXBUF Buffer Register
SPICTL.0
SPI
INT ENA
SPI
INT FLAG
SPISTS.6
Receiver
Overrun Flag
Overrun
INT ENA
SPISTS.7
SPICTL.4
SPIINT/SPIRXINT
RX Interrupt
Logic
TX Interrupt
Logic
SPIFFOVF
FLAG
SPIFFRX.15
SPIDAT Data Register
16
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Figure 4-14 is a block diagram of the SPI in slave mode.
A. SPISTE is driven low by the master for a slave device.
Figure 4-14. SPI Module Block Diagram (Slave Mode)
78 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
4.10 Inter-Integrated Circuit (I2C)
The 280x device contains one I2C Serial Port. Figure 4-15 shows how the I2C peripheral module
interfaces within the 280x device.
The I2C module has the following features:
Compliance with the Philips Semiconductors I2C-bus specification (version 2.1):
Support for 1-bit to 8-bit format transfers
7-bit and 10-bit addressing modes
General call
START byte mode
Support for multiple master-transmitters and slave-receivers
Support for multiple slave-transmitters and master-receivers
Combined master transmit/receive and receive/transmit mode
Data transfer rate of from 10 kbps up to 400 kbps (I2C Fast-mode rate)
One 16-word receive FIFO and one 16-word transmit FIFO
One interrupt that can be used by the CPU. This interrupt can be generated as a result of one of the
following conditions:
Transmit-data ready
Receive-data ready
Register-access ready
No-acknowledgment received
Arbitration lost
Stop condition detected
Addressed as slave
An additional interrupt that can be used by the CPU when in FIFO mode
Module enable/disable capability
Free data format mode
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 79
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
SYSRS
SYSCLKOUT
Control
I2CINT1A
I2CINT2A
C28x CPU
GPIO
MUX
Peripheral Bus
I2C-A
System Control Block
I2CAENCLK
PIE
Block
SDAA
SCLA
Data[16]
Data[16]
Addr[16]
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. The I2C registers are accessed at the SYSCLKOUT rate. The internal timing and signal waveforms of the I2C port are
also at the SYSCLKOUT rate.
B. The clock enable bit (I2CAENCLK) in the PCLKCRO register turns off the clock to the I2C port for low power
operation. Upon reset, I2CAENCLK is clear, which indicates the peripheral internal clocks are off.
Figure 4-15. I2C Peripheral Module Interfaces
The registers in Table 4-14 configure and control the I2C port operation.
Table 4-14. I2C-A Registers
NAME ADDRESS DESCRIPTION
I2COAR 0x7900 I2C own address register
I2CIER 0x7901 I2C interrupt enable register
I2CSTR 0x7902 I2C status register
I2CCLKL 0x7903 I2C clock low-time divider register
I2CCLKH 0x7904 I2C clock high-time divider register
I2CCNT 0x7905 I2C data count register
I2CDRR 0x7906 I2C data receive register
I2CSAR 0x7907 I2C slave address register
I2CDXR 0x7908 I2C data transmit register
I2CMDR 0x7909 I2C mode register
I2CISRC 0x790A I2C interrupt source register
I2CPSC 0x790C I2C prescaler register
I2CFFTX 0x7920 I2C FIFO transmit register
I2CFFRX 0x7921 I2C FIFO receive register
I2CRSR - I2C receive shift register (not accessible to the CPU)
I2CXSR - I2C transmit shift register (not accessible to the CPU)
80 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
GPxDAT (read)
Input
Qualification
GPxMUX1/2
High-Impedance
Output Control
GPIOx pin
XRS
0 = Input, 1 = Output
Low-Power
Modes Block
01
10
11
01
10
11
01
10
11
GPxPUD
Internal
Pullup
= Default at Reset
External Interrupt
MUX
Peripheral 3 Input
Peripheral 3 Output Enable
Peripheral 2 Output Enable
Peripheral 1 Output Enable
Peripheral 3 Output
Peripheral 2 Output
Peripheral 1 Output
Peripheral 2 Input
Peripheral 1 Input
N/C
GPxDIR (latch)
GPxDAT (latch)
Asynchronous
path
Asynchronous path
LPMCR0
GPIOLMPSEL
GPxCTRL
GPxQSEL1/2
GPIOXNMISEL
GPIOXINT2SEL
GPIOXINT1SEL
GPxSET
GPxCLEAR
GPxTOGGLE
00
00
00
PIE
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
4.11 GPIO MUX
On the 280x, the GPIO MUX can multiplex up to three independent peripheral signals on a single GPIO
pin in addition to providing individual pin bit-banging IO capability. The GPIO MUX block diagram per pin
is shown in Figure 4-16. Because of the open-drain capabilities of the I2C pins, the GPIO MUX block
diagram for these pins differ. See the TMS320x280x, 2801x, 2804x DSP System Control and Interrupts
Reference Guide (literature number SPRU712) for details.
A. x stands for the port, either A or B. For example, GPxDIR refers to either the GPADIR and GPBDIR register
depending on the particular GPIO pin selected.
B. GPxDAT latch/read are accessed at the same memory location.
Figure 4-16. GPIO MUX Block Diagram
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 81
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
The 280x supports 34 GPIO pins. The GPIO control and data registers are mapped to Peripheral Frame 1
to enable 32-bit operations on the registers (along with 16-bit operations). Table 4-15 shows the GPIO
register mapping.
Table 4-15. GPIO Registers
NAME ADDRESS SIZE (x16) DESCRIPTION
GPIO CONTROL REGISTERS (EALLOW PROTECTED)
GPACTRL 0x6F80 2 GPIO A Control Register (GPIO0 to 31)
GPAQSEL1 0x6F82 2 GPIO A Qualifier Select 1 Register (GPIO0 to 15)
GPAQSEL2 0x6F84 2 GPIO A Qualifier Select 2 Register (GPIO16 to 31)
GPAMUX1 0x6F86 2 GPIO A MUX 1 Register (GPIO0 to 15)
GPAMUX2 0x6F88 2 GPIO A MUX 2 Register (GPIO16 to 31)
GPADIR 0x6F8A 2 GPIO A Direction Register (GPIO0 to 31)
GPAPUD 0x6F8C 2 GPIO A Pull Up Disable Register (GPIO0 to 31)
0x6F8E
Reserved 2 Reserved
0x6F8F
GPBCTRL 0x6F90 2 GPIO B Control Register (GPIO32 to 35)
GPBQSEL1 0x6F92 2 GPIO B Qualifier Select 1 Register (GPIO32 to 35)
GPBQSEL2 0x6F94 2 Reserved
GPBMUX1 0x6F96 2 GPIO B MUX 1 Register (GPIO32 to 35)
GPBMUX2 0x6F98 2 Reserved
GPBDIR 0x6F9A 2 GPIO B Direction Register (GPIO32 to 35)
GPBPUD 0x6F9C 2 GPIO B Pull Up Disable Register (GPIO32 to 35)
0x6F9E
Reserved 2 Reserved
0x6F9F
0x6FA0
Reserved 32 Reserved
0x6FBF
GPIO DATA REGISTERS (NOT EALLOW PROTECTED)
GPADAT 0x6FC0 2 GPIO Data Register (GPIO0 to 31)
GPASET 0x6FC2 2 GPIO Data Set Register (GPIO0 to 31)
GPACLEAR 0x6FC4 2 GPIO Data Clear Register (GPIO0 to 31)
GPATOGGLE 0x6FC6 2 GPIO Data Toggle Register (GPIO0 to 31)
GPBDAT 0x6FC8 2 GPIO Data Register (GPIO32 to 35)
GPBSET 0x6FCA 2 GPIO Data Set Register (GPIO32 to 35)
GPBCLEAR 0x6FCC 2 GPIO Data Clear Register (GPIO32 to 35)
GPBTOGGLE 0x6FCE 2 GPIO Data Toggle Register (GPIO32 to 35)
0x6FD0
Reserved 16 Reserved
0x6FDF
GPIO INTERRUPT AND LOW POWER MODES SELECT REGISTERS (EALLOW PROTECTED)
GPIOXINT1SEL 0x6FE0 1 XINT1 GPIO Input Select Register (GPIO0 to 31)
GPIOXINT2SEL 0x6FE1 1 XINT2 GPIO Input Select Register (GPIO0 to 31)
GPIOXNMISEL 0x6FE2 1 XNMI GPIO Input Select Register (GPIO0 to 31)
0x6FE3
Reserved 5 Reserved
0x6FE7
GPIOLPMSEL 0x6FE8 2 LPM GPIO Select Register (GPIO0 to 31)
0x6FEA
Reserved 22 Reserved
0x6FFF
82 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 4-16. F2808 GPIO MUX Table
DEFAULT AT RESET
GPAMUX1/2(1) PRIMARY I/O PERIPHERAL PERIPHERAL PERIPHERAL
REGISTER FUNCTION SELECTION 1(2) SELECTION 2 SELECTION 3
BITS (GPxMUX1/2 (GPxMUX1/2 BITS = 0,1) (GPxMUX1/2 BITS = 1,0) (GPxMUX1/2 BITS = 1,1)
BITS = 0,0)
GPAMUX1
1–0 GPIO0 EPWM1A (O) Reserved(3) Reserved(3)
3–2 GPIO1 EPWM1B (O) SPISIMOD (I/O) Reserved(3)
5–4 GPIO2 EPWM2A (O) Reserved(3) Reserved(3)
7–6 GPIO3 EPWM2B (O) SPISOMID (I/O) Reserved(3)
9–8 GPIO4 EPWM3A (O) Reserved(3) Reserved(3)
11–10 GPIO5 EPWM3B (O) SPICLKD (I/O) ECAP1 (I/O)
13–12 GPIO6 EPWM4A (O) EPWMSYNCI (I) EPWMSYNCO (O)
15–14 GPIO7 EPWM4B (O) SPISTED (I/O) ECAP2 (I/O)
17–16 GPIO8 EPWM5A (O) CANTXB (O) ADCSOCAO (O)
19–18 GPIO9 EPWM5B (O) SCITXDB (O) ECAP3 (I/O)
21–20 GPIO10 EPWM6A (O) CANRXB (I) ADCSOCBO (O)
23–22 GPIO11 EPWM6B (O) SCIRXDB (I) ECAP4 (I/O)
25–24 GPIO12 TZ1 (I) CANTXB (O) SPISIMOB (I/O)
27–26 GPIO13 TZ2 (I) CANRXB (I) SPISOMIB (I/O)
29–28 GPIO14 TZ3 (I) SCITXDB (O) SPICLKB (I/O)
31–30 GPIO15 TZ4 (I) SCIRXDB (I) SPISTEB (I/O)
GPAMUX2
1–0 GPIO16 SPISIMOA (I/O) CANTXB (O) TZ5 (I)
3–2 GPIO17 SPISOMIA (I/O) CANRXB (I) TZ6 (I)
5–4 GPIO18 SPICLKA (I/O) SCITXDB (O) Reserved(4)
7–6 GPIO19 SPISTEA (I/O) SCIRXDB (I) Reserved(4)
9–8 GPIO20 EQEP1A (I) SPISIMOC (I/O) CANTXB (O)
11–10 GPIO21 EQEP1B (I) SPISOMIC (I/O) CANRXB (I)
13–12 GPIO22 EQEP1S (I/O) SPICLKC (I/O) SCITXDB (O)
15–14 GPIO23 EQEP1I (I/O) SPISTEC (I/O) SCIRXDB (I)
17–16 GPIO24 ECAP1 (I/O) EQEP2A (I) SPISIMOB (I/O)
19–18 GPIO25 ECAP2 (I/O) EQEP2B (I) SPISOMIB (I/O)
21–20 GPIO26 ECAP3 (I/O) EQEP2I (I/O) SPICLKB (I/O)
23–22 GPIO27 ECAP4 (I/O) EQEP2S (I/O) SPISTEB (I/O)
25–24 GPIO28 SCIRXDA (I) Reserved(4) TZ5 (I)
27–26 GPIO29 SCITXDA (O) Reserved(4) TZ6 (I)
29–28 GPIO30 CANRXA (I) Reserved(4) Reserved(4)
31–30 GPIO31 CANTXA (O) Reserved(4) Reserved(4)
GPBMUX1
1–0 GPIO32 SDAA (I/OC) EPWMSYNCI (I) ADCSOCAO (O)
3–2 GPIO33 SCLA (I/OC)EPWMSYNCO (O) ADCSOCBO (O)
5–4 GPIO34 Reserved(4) Reserved(4) Reserved(4)
(1) GPxMUX1/2 refers to the appropriate MUX register for the pin; GPAMUX1, GPAMUX2 or GPBMUX1.
(2) This table pertains to the 2808 device. Some peripherals may not be available in the 2809, 2806, 2802, or 2801 devices. See the pin
descriptions for more detail.
(3) The word "Reserved" means that there is no peripheral assigned to this GPxMUX1/2 register setting. Should it be selected, the state of
the pin will be undefined and the pin may be driven. This selection is a reserved configuration for future expansion.
(4) The word "Reserved" means that there is no peripheral assigned to this GPxMUX1/2 register setting. Should it be selected, the state of
the pin will be undefined and the pin may be driven. This selection is a reserved configuration for future expansion.
Copyright © 2003–2012, Texas Instruments Incorporated Peripherals 83
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
GPyCTRL Reg
SYNC
SYSCLKOUT
Qualification
Input Signal
Qualified by
3 or 6 Samples
GPIOx
Time Between Samples
GPxQSEL
Number of Samples
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
The user can select the type of input qualification for each GPIO pin via the GPxQSEL1/2 registers from
four choices:
Synchronization To SYSCLKOUT Only (GPxQSEL1/2 = 0,0): This is the default mode of all GPIO pins
at reset and it simply synchronizes the input signal to the system clock (SYSCLKOUT).
Qualification Using Sampling Window (GPxQSEL1/2 = 0,1 and 1,0): In this mode the input signal, after
synchronization to the system clock (SYSCLKOUT), is qualified by a specified number of cycles before
the input is allowed to change.
Figure 4-17. Qualification Using Sampling Window
The sampling period is specified by the QUALPRD bits in the GPxCTRL register and is configurable in
groups of 8 signals. It specifies a multiple of SYSCLKOUT cycles for sampling the input signal. The
sampling window is either 3-samples or 6-samples wide and the output is only changed when ALL
samples are the same (all 0s or all 1s) as shown in Figure 6-12 (for 6-sample mode).
No Synchronization (GPxQSEL1/2 = 1,1): This mode is used for peripherals where synchronization is
not required (synchronization is performed within the peripheral).
Due to the multi-level multiplexing that is required on the 280x device, there may be cases where a
peripheral input signal can be mapped to more then one GPIO pin. Also, when an input signal is not
selected, the input signal will default to either a 0 or 1 state, depending on the peripheral.
84 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
5 Device Support
Texas Instruments (TI) offers an extensive line of development tools for the C28x™ generation of DSPs,
including tools to evaluate the performance of the processors, generate code, develop algorithm
implementations, and fully integrate and debug software and hardware modules.
The following products support development of 280x-based applications:
Software Development Tools
Code Composer Studio™ Integrated Development Environment (IDE)
C/C++ Compiler
Code generation tools
Assembler/Linker
Cycle Accurate Simulator
Application algorithms
Sample applications code
Hardware Development Tools
2808 eZdsp™
Evaluation modules
JTAG-based emulators - SPI515, XDS510PP, XDS510PP Plus, XDS510USB
Universal 5-V dc power supply
Documentation and cables
5.1 Device and Development Support Tool Nomenclature
To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all
TMS320™ DSP devices and support tools. Each TMS320™ DSP commercial family member has one of
three prefixes: TMX, TMP, or TMS (for example, TMS320F2808). Texas Instruments recommends two of
three possible prefix designators for its support tools: TMDX and TMDS. These prefixes represent
evolutionary stages of product development from engineering prototypes (TMX/TMDX) through fully
qualified production devices/tools (TMS/TMDS).
Device development evolutionary flow:
TMX Experimental device that is not necessarily representative of the final device's electrical
specifications
TMP Final silicon die that conforms to the device's electrical specifications but has not
completed quality and reliability verification
TMS Fully qualified production device
Support tool development evolutionary flow:
TMDX Development-support product that has not yet completed Texas Instruments internal
qualification testing
TMDS Fully qualified development-support product
TMX and TMP devices and TMDX development-support tools are shipped against the following
disclaimer:
"Developmental product is intended for internal evaluation purposes."
TMS devices and TMDS development-support tools have been characterized fully, and the quality and
reliability of the device have been demonstrated fully. TI's standard warranty applies.
Copyright © 2003–2012, Texas Instruments Incorporated Device Support 85
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS 320 F28015 PZ
PREFIX
TMX = Experimental Device
TMP = Prototype Device
TMS = Qualified Device
DEVICE FAMILY
320 = TMS320 DSP Family
TM
TECHNOLOGY
PACKAGE TYPE
PZ = 100-Pin Low-Profile Quad Flatpack (LQFP)
GGM = 100-Ball Ball Grid Array (BGA)
ZGM = 100-Ball Lead-Free BGA
F = Flash EEPROM
(1.8-V Core/3.3-V I/O)
C = ROM
(1.8-V Core/3.3-V I/O)
DEVICE
2809
2808
2806
2802
2801
28015
28016
A-60
Indicates 60-MHz device.
Absence of “-60” indicates
100-MHz device.
TEMPERTURE RANGE
A = −40 °
−40°C to 125°C
Q = −40°C to 125°C (Q100 qualification)
°C to 85 C
S =
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Predictions show that prototype devices (TMX or TMP) have a greater failure rate than the standard
production devices. Texas Instruments recommends that these devices not be used in any production
system because their expected end-use failure rate still is undefined. Only qualified production devices are
to be used.
TI device nomenclature also includes a suffix with the device family name. This suffix indicates the
package type (for example, PZ) and temperature range (for example, S). Figure 5-1 provides a legend for
reading the complete device name for any family member.
Figure 5-1. Example of TMS320x280x/2801x Device Nomenclature
86 Device Support Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
5.2 Documentation Support
Extensive documentation supports all of the TMS320™ DSP family generations of devices from product
announcement through applications development. The types of documentation available include: data
sheets and data manuals, with design specifications; and hardware and software applications.
Table 5-1 shows the peripheral reference guides appropriate for use with the devices in this data manual.
See the TMS320x28xx, 28xxx DSP Peripheral Reference Guide (literature number SPRU566) for more
information on types of peripherals.
Table 5-1. TMS320x280x, 2801x Peripheral Selection Guide
F2809, F2808,
F2806, F2802,
LITERATURE
PERIPHERAL GUIDE TYPE(1) F2801, C2802,
NUMBER C2801, F28016,
F28015
TMS320x280x, 2801x, 2804x DSP System Control and Interrupts SPRU712 X
TMS320x280x, 2801x, 2804x Boot ROM SPRU722
TMS320x280x, 2801x, 2804x DSP Analog-to-Digital Converter (ADC) SPRU716 1 X
TMS320x280x, 2801x, 2804x Enhanced Pulse Width Modulator SPRU791 0 X
(ePWM) Module
TMS320x280x, 2801x, 2804x High-Resolution Pulse Width Modulator SPRU924 0 X
TMS320x280x, 2801x, 2804x Enhanced Capture (eCAP) Module SPRU807 0 X
TMS320x280x, 2801x, 2804x Enhanced Quadrature Encoder Pulse SPRU790 0 X
(eQEP) Module
TMS320x280x/2801x Enhanced Controller Area Network (eCAN) SPRUEU0 0 X
TMS320x280x, 2801x, 2804x Serial Communication Interface (SCI) SPRUFK7 0 X
TMS320x280x, 2801x, 2804x Serial Peripheral Interface SPRUG72 0 X
TMS320x28xx, 28xxx Inter-Integrated Circuit (I2C) Module SPRU721 0 X
(1) A type change represents a major functional feature difference in a peripheral module. Within a peripheral type, there may be minor
differences between devices that do not affect the basic functionality of the module. These device-specific differences are listed in the
TMS320x28xx, 28xxx DSP Peripheral Reference Guide (literature number SPRU566) and in the peripheral reference guides.
The following documents are available on the TI website (www.ti.com):
Data Manual and Errata
SPRS230 TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801,
TMS320C2802, TMS320C2801, TMS320F28016, TMS320F28015 Digital Signal
Processors Data Manual contains the pinout, signal descriptions, as well as electrical and
timing specifications for the F280x, C280x, and F2801x devices.
SPRZ171 TMS320F280x, TMS320C280x, and TMS320F2801x DSC Silicon Errata describes known
advisories on silicon and provides workarounds.
CPU User's Guides
SPRU430 TMS320C28x CPU and Instruction Set Reference Guide describes the central processing
unit (CPU) and the assembly language instructions of the TMS320C28x fixed-point digital
signal processors (DSPs). It also describes emulation features available on these DSPs.
SPRU712 TMS320x280x, 2801x, 2804x DSP System Control and Interrupts Reference Guide
describes the various interrupts and system control features of the 280x digital signal
processors (DSPs).
Copyright © 2003–2012, Texas Instruments Incorporated Device Support 87
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Peripheral Guides
SPRU566 TMS320x28xx, 28xxx DSP Peripheral Reference Guide describes the peripheral reference
guides of the 28x digital signal processors (DSPs).
SPRU716 TMS320x280x, 2801x, 2804x DSP Analog-to-Digital Converter (ADC) Reference Guide
describes how to configure and use the on-chip ADC module, which is a 12-bit pipelined
ADC.
SPRU791 TMS320x280x, 2801x, 2804x Enhanced Pulse Width Modulator (ePWM) Module
Reference Guide describes the main areas of the enhanced pulse width modulator that
include digital motor control, switch mode power supply control, UPS (uninterruptible power
supplies), and other forms of power conversion
SPRU790 TMS320x280x, 2801x, 2804x Enhanced Quadrature Encoder Pulse (eQEP) Module
Reference Guide describes the eQEP module, which is used for interfacing with a linear or
rotary incremental encoder to get position, direction, and speed information from a rotating
machine in high performance motion and position control systems. It includes the module
description and registers
SPRU807 TMS320x280x, 2801x, 2804x Enhanced Capture (eCAP) Module Reference Guide
describes the enhanced capture module. It includes the module description and registers.
SPRU924 TMS320x280x, 2801x, 2804x High-Resolution Pulse Width Modulator Reference Guide
describes the operation of the high-resolution extension to the pulse width modulator
(HRPWM).
SPRUEU0 TMS320x280x/2801x Enhanced Controller Area Network (eCAN) Reference Guide
describes the enhanced controller area network (eCAN) on the x280x and x2801x devices.
SPRUFK7 TMS320x280x, 2801x, 2804x Serial Communication Interface (SCI) Reference Guide
describes the features and operation of the serial communication interface (SCI) module that
is available on the TMS320x280x, 2801x, 2804x devices.
SPRUG72 TMS320x280x, 2801x, 2804x Serial Peripheral Interface Reference Guide describes how
the serial peripheral interface works.
SPRU721 TMS320x28xx, 28xxx Inter-Integrated Circuit (I2C) Module Reference Guide describes
the features and operation of the inter-integrated circuit (I2C) module.
SPRU722 TMS320x280x, 2801x, 2804x Boot ROM Reference Guide describes the purpose and
features of the bootloader (factory-programmed boot-loading software). It also describes
other contents of the device on-chip boot ROM and identifies where all of the information is
located within that memory.
Tools Guides
SPRU513 TMS320C28x Assembly Language Tools v5.0.0 User's Guide describes the assembly
language tools (assembler and other tools used to develop assembly language code),
assembler directives, macros, common object file format, and symbolic debugging directives
for the TMS320C28x device.
SPRU514 TMS320C28x Optimizing C/C++ Compiler v5.0.0 User's Guide describes the
TMS320C28x™ C/C++ compiler. This compiler accepts ANSI standard C/C++ source code
and produces TMS320 DSP assembly language source code for the TMS320C28x device.
SPRU608 TMS320C28x Instruction Set Simulator Technical Overview describes the simulator,
available within the Code Composer Studio for TMS320C2000 IDE, that simulates the
instruction set of the C28x™ core.
SPRU625 TMS320C28x DSP/BIOS 5.32 Application Programming Interface (API) Reference
Guide describes development using DSP/BIOS.
88 Device Support Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Application Reports and Software
Key Links Include:
1. C2000 Get Started - www.ti.com/c2000getstarted
2. C2000 Digital Motor Control Software Library - www.ti.com/c2000appsw
3. C2000 Digital Power Supply Software Library - www.ti.com/dpslib
4. DSP Power Management Reference Designs - www.ti.com/dsppower
SPRAAQ7 TMS320x281x to TMS320x2833x or 2823x Migration Overview describes how to migrate
from the 281x device design to 2833x or 2823x designs.
SPRAAQ8 TMS320x280x to TMS320x2833x or 2823x Migration Overview describes how to migrate
from a 280x device design to 2833x or 2823x designs.
SPRAAN9 C28x FPU Primer provides an overview of the floating-point unit (FPU) in the
TMS320F28335, TMS320F28334, and TMS320F28332 Digital Signal Controller (DSC)
devices.
SPRAAM0 Getting Started With TMS320C28x Digital Signal Controllers is organized by
development flow and functional areas to make your design effort as seamless as possible.
Tips on getting started with C28x™ DSP software and hardware development are provided
to aid in your initial design and debug efforts. Each section includes pointers to valuable
information including technical documentation, software, and tools for use in each phase of
design.
SPRA958 Running an Application from Internal Flash Memory on the TMS320F28xxx DSP covers
the requirements needed to properly configure application software for execution from on-
chip flash memory. Requirements for both DSP/BIOS™ and non-DSP/BIOS projects are
presented. Example code projects are included.
SPRAA85 Programming TMS320x28xx and 28xxx Peripherals in C/C++ explores a hardware
abstraction layer implementation to make C/C++ coding easier on 28x DSPs. This method is
compared to traditional #define macros and topics of code efficiency and special case
registers are also addressed.
SPRAA88 Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x Digital Signal
Controller presents a method for utilizing the on-chip pulse width modulated (PWM) signal
generators on the TMS320F280x family of digital signal controllers as a digital-to-analog
converter (DAC).
SPRAA91 TMS320F280x Digital Signal Controller USB Connectivity Using the TUSB3410 USB-to-
UART Bridge Chip presents hardware connections as well as software preparation and
operation of the development system using a simple communication echo program.
SPRAAH1 Using the Enhanced Quadrature Encoder Pulse (eQEP) Module in TMS320x280x,
28xxx as a Dedicated Capture provides a guide for the use of the eQEP module as a
dedicated capture unit and is applicable to the TMS320x280x, 28xxx family of processors.
SPRAAI1 Using the ePWM Module for 0% 100% Duty Cycle Control provides a guide for the use
of the ePWM module to provide 0% to 100% duty cycle control and is applicable to the
TMS320x280x family of processors.
SPRAAD5 Power Line Communication for Lighting Applications Using Binary Phase Shift Keying
(BPSK) with a Single DSP Controller presents a complete implementation of a power line
modem following CEA-709 protocol using a single DSP.
Copyright © 2003–2012, Texas Instruments Incorporated Device Support 89
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
SPRAAD8 TMS320x280x and TMS320F2801x ADC Calibration describes a method for improving the
absolute accuracy of the 12-bit ADC found on the TMS320x280x and TMS320F2801x
devices. Inherent gain and offset errors affect the absolute accuracy of the ADC. The
methods described in this report can improve the absolute accuracy of the ADC to levels
better than 0.5%. This application report has an option to download an example program that
executes from RAM on the F2808 EzDSP.
SPRA820 Online Stack Overflow Detection on the TMS320C28x DSP presents the methodology for
online stack overflow detection on the TMS320C28x DSP. C-source code is provided that
contains functions for implementing the overflow detection on both DSP/BIOS and non-
DSP/BIOS applications.
SPRA806 An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
provides instructions and suggestions to configure the C compiler to assist with C-callable
assembly routines.
SPRAA58 TMS320x281x to TMS320x280x Migration Overview describes differences between the
Texas Instruments TMS320x281x and the TMS320x280x/2801x/2804x DSPs to assist in
application migration.
Software
SPRC191 C280x, C2801x C/C++ Header Files and Peripheral Examples
BSDL Models
SPRM244 F2809 GGM/ZGM BSDL Model
SPRM245 F2809 PZ BSDL Model
SPRM198 F2808 100-Pin GGM/ZGM BSDL Model
SPRM197 F2808 100-Pin PZ BSDL Model
SPRM196 F2806 100-Pin PZ BSDL Model
SPRM200 F2806 100-Pin GGM/ZGM BSDL Model
SPRM414 F2802 GGM BSDL Model
SPRM413 F2802 PZ BSDL Model
SPRM415 F2802 ZGM BSDL Model
SPRM194 F2801 100-Pin GGM/ZGM BSDL Model
SPRM195 F2801 100-Pin PZ BSDL Model
SPRM261 C2802 100-Pin GGM/ZGM BSDL Model
SPRM260 C2802 100-Pin PZ BSDL Model
SPRM259 C2801 100-Pin GGM/ZGM BSDL Model
SPRM258 C2801 100-Pin PZ BSDL Model
SPRM416 F28016 GGM BSDL Model
SPRM357 F28016 PZ BSDL Model
SPRM417 F28016 ZGM BSDL Model
SPRM412 F28015 GGM BSDL Model
SPRM356 F28015 PZ BSDL Model
SPRM355 F28015 ZGM BSDL Model
90 Device Support Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
IBIS Models
SPRM445 F2809 GGM IBIS Model
SPRM295 F2809 PZ IBIS Model
SPRM444 F2809 ZGM IBIS Model
SPRM291 F2808 GGM IBIS Model
SPRM292 F2808 PZ IBIS Model
SPRM293 F2808 ZGM IBIS Model
SPRM288 F2806 GGM IBIS Model
SPRM289 F2806 PZ IBIS Model
SPRM290 F2806 ZGM IBIS Model
SPRM285 F2802 GGM IBIS Model
SPRM286 F2802 PZ IBIS Model
SPRM287 F2802 ZGM IBIS Model
SPRM282 F2801 GGM IBIS Model
SPRM283 F2801 PZ IBIS Model
SPRM284 F2801 ZGM IBIS Model
SPRM310 C2802 GGM IBIS Model
SPRM449 C2802 PZ IBIS Model
SPRM311 C2802 ZGM IBIS Model
SPRM308 C2801 GGM IBIS Model
SPRM448 C2801 PZ IBIS Model
SPRM309 C2801 ZGM IBIS Model
SPRM405 F28016 GGM IBIS Model
SPRM300 F28016 PZ IBIS Model
SPRM404 F28016 ZGM IBIS Model
SPRM403 F28015 GGM IBIS Model
SPRM299 F28015 PZ IBIS Model
SPRM402 F28015 ZGM IBIS Model
A series of DSP textbooks is published by Prentice-Hall and John Wiley & Sons to support digital signal
processing research and education. The TMS320 DSP newsletter, Details on Signal Processing, is
published quarterly and distributed to update TMS320 DSP customers on product information.
Updated information on the TMS320 DSP controllers can be found on the worldwide web at:
http://www.ti.com.
To send comments regarding this data manual (literature number SPRS230), use the
comments@books.sc.ti.com email address, which is a repository for feedback. For questions and support,
contact the Product Information Center listed at the http://www.ti.com/sc/docs/pic/home.htm site.
Copyright © 2003–2012, Texas Instruments Incorporated Device Support 91
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
5.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the
respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views;
see TI's Terms of Use.
TI E2E Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and
help solve problems with fellow engineers.
TI Embedded Processors Wiki Texas Instruments Embedded Processors Wiki. Established to help
developers get started with Embedded Processors from Texas Instruments and to foster
innovation and growth of general knowledge about the hardware and software surrounding
these devices.
92 Device Support Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6 Electrical Specifications
This section provides the absolute maximum ratings and the recommended operating conditions for the
TMS320F280x DSPs.
6.1 Absolute Maximum Ratings(1) (2)
Unless otherwise noted, the list of absolute maximum ratings are specified over operating temperature ranges.
Supply voltage range, VDDIO, VDD3VFL with respect to VSS –0.3 V to 4.6 V
Supply voltage range, VDDA2, VDDAIO with respect to VSSA –0.3 V to 4.6 V
Supply voltage range, VDD with respect to VSS –0.3 V to 2.5 V
Supply voltage range, VDD1A18, VDD2A18 with respect to VSSA –0.3 V to 2.5 V
Supply voltage range, VSSA2, VSSAIO, VSS1AGND, VSS2AGND with respect to VSS 0.3 V to 0.3 V
Input voltage range, VIN –0.3 V to 4.6 V
Output voltage range, VO–0.3 V to 4.6 V
Input clamp current, IIK (VIN < 0 or VIN > VDDIO)(3) ±20 mA
Output clamp current, IOK (VO< 0 or VO> VDDIO) ±20 mA
Operating ambient temperature ranges TA: A version (GGM, ZGM, PZ)(4) –40°C to 85°C
TA: S version (GGM, ZGM, PZ) (4) –40°C to 125°C
TA: Q version (PZ)(4) –40°C to 125°C
Junction temperature range, TJ(4) –40°C to 150°C
Storage temperature range, Tstg (4) –65°C to 150°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Section 6.2 is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to VSS, unless otherwise noted.
(3) Continuous clamp current per pin is ±2 mA. This includes the analog inputs which have an internal clamping circuit that clamps the
voltage to a diode drop above VDDA2 or below VSSA2.
(4) Long-term high-temperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall device
life. For additional information, see IC Package Thermal Metrics Application Report (literature number SPRA953) and Reliability Data for
TMS320LF24xx and TMS320F28xx Devices Application Report (literature number SPRA963).
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 93
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.2 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted) MIN NOM MAX UNIT
Device supply voltage, I/O, VDDIO 3.14 3.3 3.47 V
Device supply voltage CPU, VDD 1.71 1.8 1.89 V
Supply ground, VSS, VSSIO 0 V
ADC supply voltage (3.3 V), VDDA2, VDDAIO 3.14 3.3 3.47 V
ADC supply voltage (1.8 V), VDD1A18, VDD2A18 1.71 1.8 1.89 V
Flash supply voltage, VDD3VFL 3.14 3.3 3.47 V
Device clock frequency (system clock), 100-MHz devices 2 100 MHz
fSYSCLKOUT 60-MHz devices 2 60 MHz
High-level input voltage, VIH All inputs except X1 2 VDDIO + 0.3 V
X1 0.7 * VDD 0.05 VDD
Low-level input voltage, VIL All inputs except X1 VSS 0.3 0.8 V
X1 0.3 * VDD + 0.05
All I/Os except Group 2 –4 mA
High-level output source current,
VOH = 2.4 V, IOH Group 2(1) –8
All I/Os except Group 2 4 mA
Low-level output sink current,
VOL = VOL MAX, IOL Group 2(1) 8
A version –40 85 °C
S version –40 125
Ambient temperature, TAQ version –40 125
(Q100 Qualification)
(1) Group 2 pins are as follows: GPIO28, GPIO29, GPIO30, GPIO31, TDO, XCLKOUT, EMU0, and EMU1
6.3 Electrical Characteristics
over recommended operating conditions (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
IOH = IOH MAX 2.4
VOH High-level output voltage V
IOH = 50 μA VDDIO 0.2
VOL Low-level output voltage IOL = IOL MAX 0.4 V
Pin with pullup VDDIO = 3.3 V, VIN = 0 V All I/Os (including XRS) –80 –140 –190
enabled
Input current
IIL μA
(low level) Pin with pulldown VDDIO = 3.3 V, VIN = 0 V ±2
enabled
Pin with pullup VDDIO = 3.3 V, VIN = VDDIO ±2
enabled
Input current Pin with pulldown
IIH VDDIO = 3.3 V, VIN = VDDIO (F280x) 28 50 80 μA
(high level) enabled
Pin with pulldown VDDIO = 3.3 V, VIN = VDDIO (C280x) 80 140 190
enabled
Output current, pullup or
IOZ VO= VDDIO or 0 V ±2 μA
pulldown disabled
CIInput capacitance 2 pF
94 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.4 Current Consumption
Table 6-1. TMS320F2809, TMS320F2808 Current Consumption by Power-Supply Pins at 100-MHz
SYSCLKOUT
IDD IDDIO (1) IDD3VFL (2) IDDA18 (3) IDDA33 (4)
MODE TEST CONDITIONS TYP(5) MAX(6) TYP(5) MAX(6) TYP MAX(6) TYP(5) MAX(6) TYP(5) MAX(6)
The following peripheral
clocks are enabled:
ePWM1/2/3/4/5/6
eCAP1/2/3/4
eQEP1/2
eCAN-A
SCI-A/B
SPI-A
ADC
I2C
Operational 195 mA 230 mA 15 mA 27 mA 35 mA 40 mA 30 mA 38 mA 1.5 mA 2 mA
All PWM pins are toggled
(Flash) at 100 kHz.
All I/O pins are left
unconnected.
Data is continuously
transmitted out of the
SCI-A, SCI-B, and
eCAN-A ports. The
hardware multiplier is
exercised.
Code is running out of
flash with 3 wait-states.
XCLKOUT is turned off.
Flash is powered down.
XCLKOUT is turned off.
The following peripheral
clocks are enabled:
IDLE 75 mA 90 mA 500 μA 2 mA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
eCAN-A
SCI-A
SPI-A
I2C
Flash is powered down.
STANDBY 6 mA 12 mA 100 μA 500 μA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
Peripheral clocks are off.
Flash is powered down.
HALT Peripheral clocks are off. 70 μA 60 μA 120 μA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
Input clock is disabled.
(1) IDDIO current is dependent on the electrical loading on the I/O pins.
(2) The IDD3VFL current indicated in this table is the flash read-current and does not include additional current for erase/write operations.
During flash programming, extra current is drawn from the VDD and VDD3VFL rails, as indicated in Table 6-45. If the user application
involves on-board flash programming, this extra current must be taken into account while architecting the power-supply stage.
(3) IDDA18 includes current into VDD1A18 and VDD2A18 pins. In order to realize the IDDA18 currents shown for IDLE, STANDBY, and HALT,
clock to the ADC module must be turned off explicitly by writing to the PCLKCR0 register.
(4) IDDA33 includes current into VDDA2 and VDDAIO pins.
(5) TYP numbers are applicable over room temperature and nominal voltage.
(6) MAX numbers are at 125°C and MAX voltage.
NOTE
The peripheral - I/O multiplexing implemented in the 280x devices prevents all available
peripherals from being used at the same time. This is because more than one peripheral
function may share an I/O pin. It is, however, possible to turn on the clocks to all the
peripherals at the same time, although such a configuration is not useful. If this is done, the
current drawn by the device will be more than the numbers specified in the current
consumption tables.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 95
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-2. TMS320F2806 Current Consumption by Power-Supply Pins at 100-MHz SYSCLKOUT
IDD IDDIO (1) IDD3VFL (2) IDDA18 (3) IDDA33 (4)
MODE TEST CONDITIONS TYP(5) MAX(6) TYP(5) MAX(6) TYP(5) MAX(6) TYP(5) MAX(6) TYP(5) MAX(6)
The following peripheral
clocks are enabled:
ePWM1/2/3/4/5/6
eCAP1/2/3/4
eQEP1/2
eCAN-A
SCI-A/B
SPI-A
ADC
Operational I2C 195 mA 230 mA 15 mA 27 mA 35 mA 40 mA 30 mA 38 mA 1.5 mA 2 mA
(Flash) All PWM pins are toggled at
100 kHz.
All I/O pins are left
unconnected.
Data is continuously
transmitted out of the SCI-
A, SCI-B, and eCAN-A
ports. The hardware
multiplier is exercised.
Code is running out of flash
with 3 wait-states.
XCLKOUT is turned off
Flash is powered down.
XCLKOUT is turned off.
The following peripheral
clocks are enabled:
IDLE 75 mA 90 mA 500 μA 2 mA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
eCAN-A
SCI-A
SPI-A
I2C
Flash is powered down.
STANDBY 6 mA 12 mA 100 μA 500 μA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
Peripheral clocks are off.
Flash is powered down.
HALT Peripheral clocks are off. 70 μA 60 μA 120 μA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
Input clock is disabled.
(1) IDDIO current is dependent on the electrical loading on the I/O pins.
(2) The IDD3VFL current indicated in this table is the flash read-current and does not include additional current for erase/write operations.
During flash programming, extra current is drawn from the VDD and VDD3VFL rails, as indicated in Table 6-45. If the user application
involves on-board flash programming, this extra current must be taken into account while architecting the power-supply stage.
(3) IDDA18 includes current into VDD1A18 and VDD2A18 pins. In order to realize the IDDA18 currents shown for IDLE, STANDBY, and HALT,
clock to the ADC module must be turned off explicitly by writing to the PCLKCR0 register.
(4) IDDA33 includes current into VDDA2 and VDDAIO pins.
(5) TYP numbers are applicable over room temperature and nominal voltage.
(6) MAX numbers are at 125°C and MAX voltage.
NOTE
The peripheral - I/O multiplexing implemented in the 280x devices prevents all available
peripherals from being used at the same time. This is because more than one peripheral
function may share an I/O pin. It is, however, possible to turn on the clocks to all the
peripherals at the same time, although such a configuration is not useful. If this is done, the
current drawn by the device will be more than the numbers specified in the current
consumption tables.
96 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 6-3. TMS320F2802, TMS320F2801 Current Consumption by Power-Supply Pins at 100-MHz
SYSCLKOUT
IDD IDDIO (1) IDD3VFL (2) IDDA18 (3) IDDA33 (4)
MODE TEST CONDITIONS TYP(5) MAX(6) TYP(5) MAX(6) TYP(5) MAX(6) TYP(5) MAX(6) TYP(5) MAX(6)
The following peripheral
clocks are enabled:
ePWM1/2/3
eCAP1/2
eQEP1
eCAN-A
SCI-A
SPI-A
ADC
Operational I2C 180 mA 210 mA 15 mA 27 mA 35 mA 40 mA 30 mA 38 mA 1.5 mA 2 mA
(Flash) All PWM pins are toggled at
100 kHz.
All I/O pins are left
unconnected.
Data is continuously
transmitted out of the SCI-A,
SCI-B, and eCAN-A ports.
The hardware multiplier is
exercised.
Code is running out of flash
with 3 wait-states.
XCLKOUT is turned off.
Flash is powered down.
XCLKOUT is turned off.
The following peripheral
clocks are enabled:
IDLE 75 mA 90 mA 500 μA 2 mA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
eCAN-A
SCI-A
SPI-A
I2C
Flash is powered down.
STANDBY 6 mA 12 mA 100 μA 500 μA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
Peripheral clocks are off.
Flash is powered down.
HALT Peripheral clocks are off. 70 μA 60 μA 120 μA 2 μA 10 μA 5 μA 50 μA 15 μA 30 μA
Input clock is disabled.
(1) IDDIO current is dependent on the electrical loading on the I/O pins.
(2) The IDD3VFL current indicated in this table is the flash read-current and does not include additional current for erase/write operations.
During flash programming, extra current is drawn from the VDD and VDD3VFL rails, as indicated in Table 6-45. If the user application
involves on-board flash programming, this extra current must be taken into account while architecting the power-supply stage.
(3) IDDA18 includes current into VDD1A18 and VDD2A18 pins. In order to realize the IDDA18 currents shown for IDLE, STANDBY, and HALT,
clock to the ADC module must be turned off explicitly by writing to the PCLKCR0 register.
(4) IDDA33 includes current into VDDA2 and VDDAIO pins.
(5) TYP numbers are applicable over room temperature and nominal voltage.
(6) MAX numbers are at 125°C and MAX voltage.
NOTE
The peripheral - I/O multiplexing implemented in the 280x devices prevents all available
peripherals from being used at the same time. This is because more than one peripheral
function may share an I/O pin. It is, however, possible to turn on the clocks to all the
peripherals at the same time, although such a configuration is not useful. If this is done, the
current drawn by the device will be more than the numbers specified in the current
consumption tables.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 97
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-4. TMS320C2802, TMS320C2801 Current Consumption by Power-Supply Pins at 100-
MHz SYSCLKOUT
IDD IDDIO (1) IDDA18 (2) IDDA33 (3)
MODE TEST CONDITIONS TYP(4) MAX(5) TYP(4) MAX(5) TYP(4) MAX(5) TYP(4) MAX(5)
The following peripheral clocks
are enabled:
ePWM1/2/3
eCAP1/2
eQEP1
eCAN-A
SCI-A
SPI-A
ADC
Operational 150 mA 165 mA 5 mA 10 mA 30 mA 38 mA 1.5 mA 2 mA
(ROM) I2C
All PWM pins are toggled at
100 kHz.
All I/O pins are left unconnected.
Data is continuously transmitted
out of the SCI-A, SCI-B, and
eCAN-A ports. The hardware
multiplier is exercised.
Code is running out of ROM with
3 wait-states.
XCLKOUT is turned off.
XCLKOUT is turned off.
The following peripheral clocks
are enabled:
eCAN-A
IDLE 75 mA 90 mA 500 μA 2 mA 5 μA 50 μA 15 μA 30 μA
SCI-A
SPI-A
I2C
STANDBY Peripheral clocks are off. 6 mA 12 mA 100 μA 500 μA 5 μA 50 μA 15 μA 30 μA
Peripheral clocks are off.
HALT 70 μA 80 μA 120 μA 5 μA 50 μA 15 μA 30 μA
Input clock is disabled.
(1) IDDIO current is dependent on the electrical loading on the I/O pins.
(2) IDDA18 includes current into VDD1A18 and VDD2A18 pins. In order to realize the IDDA18 currents shown for IDLE, STANDBY, and HALT,
clock to the ADC module must be turned off explicitly by writing to the PCLKCR0 register.
(3) IDDA33 includes current into VDDA2 and VDDAIO pins.
(4) TYP numbers are applicable over room temperature and nominal voltage.
(5) MAX numbers are at 125°C and MAX voltage.
NOTE
The peripheral - I/O multiplexing implemented in the 280x devices prevents all available
peripherals from being used at the same time. This is because more than one peripheral
function may share an I/O pin. It is, however, possible to turn on the clocks to all the
peripherals at the same time, although such a configuration is not useful. If this is done, the
current drawn by the device will be more than the numbers specified in the current
consumption tables.
98 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.4.1 Reducing Current Consumption
280x devices have a richer peripheral mix compared to the 281x family. While the McBSP has been
removed, the following new peripherals have been added on the 280x:
3 SPI modules
1 CAN module
1 I2C module
The two event manager modules of the 281x have been enhanced and replaced with separate ePWM (6),
eCAP (4) and eQEP (2) modules, providing tremendous flexibility in applications. Like 281x, 280x DSPs
incorporate a unique method to reduce the device current consumption. Since each peripheral unit has an
individual clock-enable bit, significant reduction in current consumption can be achieved by turning off the
clock to any peripheral module that is not used in a given application. Furthermore, any one of the three
low-power modes could be taken advantage of to reduce the current consumption even further. Table 6-5
indicates the typical reduction in current consumption achieved by turning off the clocks.
Table 6-5. Typical Current Consumption by Various
Peripherals (at 100 MHz)(1)
PERIPHERAL IDD CURRENT
MODULE REDUCTION (mA)(2)
ADC 8(3)
I2C 5
eQEP 5
ePWM 5
eCAP 2
SCI 4
SPI 5
eCAN 11
(1) All peripheral clocks are disabled upon reset. Writing to/reading from
peripheral registers is possible only after the peripheral clocks are
turned on.
(2) For peripherals with multiple instances, the current quoted is per
module. For example, the 5 mA number quoted for ePWM is for one
ePWM module.
(3) This number represents the current drawn by the digital portion of
the ADC module. Turning off the clock to the ADC module results in
the elimination of the current drawn by the analog portion of the ADC
(IDDA18) as well.
NOTE
IDDIO current consumption is reduced by 15 mA (typical) when XCLKOUT is turned off.
NOTE
The baseline IDD current (current when the core is executing a dummy loop with no
peripherals enabled) is 110 mA, typical. To arrive at the IDD current for a given application,
the current-drawn by the peripherals (enabled by that application) must be added to the
baseline IDD current.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 99
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
0.0
100.0
200.0
300.0
400.0
500.0
600.0
10 20 30 40 50 60 70 80 90 100
SYSCLKOUT (MHz)
Device Power (mW)
TOTAL POWER
0.0
50.0
100.0
150.0
200.0
250.0
10 20 30 40 50 60 70 80 90 100
SYSCLKOUT (MHz)
Current (mA)
IDD IDDA18 IDDIO IDD3VFL 3.3-V current
1.8-V current
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.4.2 Current Consumption Graphs
Figure 6-1. Typical Operational Current Versus Frequency (F2808)
Figure 6-2. Typical Operational Power Versus Frequency (F2808)
NOTE
Typical operational current for 60-MHz devices can be estimated from Figure 6-1. For IDD
current alone, subtract the current contribution of non-existent peripherals after scaling the
peripheral currents for 60 MHz. For example, to compute the current of F2801-60 device, the
contribution by the following peripherals must be subtracted from IDD: ePWM4/5/6, eCAP3/4,
eQEP2, SCI-B.
100 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Device Power Vs SYSCLKOUT
0.0
100.0
200.0
300.0
400.0
10 20 30 40 50 60 70 80 90 100
SYSCLKOUT (MHz)
Device Power (mW)
TOTAL POWER
Current Vs SYSCLKOUT
0
20
40
60
80
100
120
140
160
180
200
10 20 30 40 50 60 70 80 90 10
SYSCLKOUT (MHz)
Current (mA)
IDD IDDA18 1.8v current IDDIO IDD3VFL 3.3v current
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 6-3. Typical Operational Current Versus Frequency (C280x)
Figure 6-4. Typical Operational Power Versus Frequency (C280x)
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 101
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
6 inches or less
EMU0 13
11
2
5
4
6
8
10
12
1
3
9
7
14
EMU0 PD
GND
GND
GND
GND
GND
EMU1 EMU1
TMS TMS
TDI TDI
DSP
JTAG Header
TDO TDO
TCK TCK
TCK_RET
TRST TRST
VDDIO VDDIO
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.5 Emulator Connection Without Signal Buffering for the DSP
Figure 6-5 shows the connection between the DSP and JTAG header for a single-processor configuration.
If the distance between the JTAG header and the DSP is greater than 6 inches, the emulation signals
must be buffered. If the distance is less than 6 inches, buffering is typically not needed. Figure 6-5 shows
the simpler, no-buffering situation. For the pullup/pulldown resistor values, see the pin description section.
Figure 6-5. Emulator Connection Without Signal Buffering for the DSP
102 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Transmission Line
4.0 pF 1.85 pF
Z0 = 50 W(A)
Tester Pin Electronics Data Sheet Timing Reference Point
Output
Under
Test
42 W3.5 nH
Device Pin(B)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.6 Timing Parameter Symbology
Timing parameter symbols used are created in accordance with JEDEC Standard 100. To shorten the
symbols, some of the pin names and other related terminology have been abbreviated as follows:
Lowercase subscripts and their Letters and symbols and their
meanings: meanings:
a access time H High
c cycle time (period) L Low
d delay time V Valid
Unknown, changing, or don't care
f fall time X level
h hold time Z High impedance
r rise time
su setup time
t transition time
v valid time
w pulse duration (width)
6.6.1 General Notes on Timing Parameters
All output signals from the 28x devices (including XCLKOUT) are derived from an internal clock such that
all output transitions for a given half-cycle occur with a minimum of skewing relative to each other.
The signal combinations shown in the following timing diagrams may not necessarily represent actual
cycles. For actual cycle examples, see the appropriate cycle description section of this document.
6.6.2 Test Load Circuit
This test load circuit is used to measure all switching characteristics provided in this document.
A. Input requirements in this data sheet are tested with an input slew rate of < 4 Volts per nanosecond (4 V/ns) at the
device pin.
B. The data sheet provides timing at the device pin. For output timing analysis, the tester pin electronics and its
transmission line effects must be taken into account. A transmission line with a delay of 2 ns or longer can be used to
produce the desired transmission line effect. The transmission line is intended as a load only. It is not necessary to
add or subtract the transmission line delay (2 ns or longer) from the data sheet timing.
Figure 6-6. 3.3-V Test Load Circuit
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 103
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.6.3 Device Clock Table
This section provides the timing requirements and switching characteristics for the various clock options
available on the 280x DSPs. Table 6-6 and Table 6-7 list the cycle times of various clocks.
Table 6-6. TMS320x280x Clock Table and Nomenclature (100-MHz Devices)
MIN NOM MAX UNIT
tc(OSC), Cycle time 28.6 50 ns
On-chip oscillator
clock Frequency 20 35 MHz
tc(CI), Cycle time 10 250 ns
XCLKIN(1) Frequency 4 100 MHz
tc(SCO), Cycle time 10 500 ns
SYSCLKOUT Frequency 2 100 MHz
tc(XCO), Cycle time 10 2000 ns
XCLKOUT Frequency 0.5 100 MHz
tc(HCO), Cycle time 10 20(3) ns
HSPCLK(2) Frequency 50(3) 100 MHz
tc(LCO), Cycle time 10 40(3) ns
LSPCLK(2) Frequency 25(3) 100 MHz
tc(ADCCLK), Cycle time (All devices except F2809) 80 ns
Frequency (All devices except F2809) 12.5 MHz
ADC clock tc(ADCCLK), Cycle time (F2809) 40 ns
Frequency (F2809) 25 MHz
(1) This also applies to the X1 pin if a 1.8-V oscillator is used.
(2) Lower LSPCLK and HSPCLK will reduce device power consumption.
(3) This is the default reset value if SYSCLKOUT = 100 MHz.
Table 6-7. TMS320x280x/2801x Clock Table and Nomenclature (60-MHz Devices)
MIN NOM MAX UNIT
tc(OSC), Cycle time 28.6 50 ns
On-chip oscillator
clock Frequency 20 35 MHz
tc(CI), Cycle time 16.67 250 ns
XCLKIN(1) Frequency 4 60 MHz
tc(SCO), Cycle time 16.67 500 ns
SYSCLKOUT Frequency 2 60 MHz
tc(XCO), Cycle time 16.67 2000 ns
XCLKOUT Frequency 0.5 60 MHz
tc(HCO), Cycle time 16.67 33.3(3) ns
HSPCLK(2) Frequency 30(3) 60 MHz
tc(LCO), Cycle time 16.67 66.7(3) ns
LSPCLK(2) Frequency 15(3) 60 MHz
tc(ADCCLK), Cycle time 133.33 ns
ADC clock Frequency 7.5 MHz
(1) This also applies to the X1 pin if a 1.8-V oscillator is used.
(2) Lower LSPCLK and HSPCLK will reduce device power consumption.
(3) This is the default reset value if SYSCLKOUT = 60 MHz.
104 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.7 Clock Requirements and Characteristics
Table 6-8. Input Clock Frequency
PARAMETER MIN TYP MAX UNIT
Resonator (X1/X2) 20 35
Crystal (X1/X2) 20 35
fxInput clock frequency MHz
100-MHz device 4 100
External oscillator/clock
source (XCLKIN or X1 pin) 60-MHz device 4 60
flLimp mode SYSCLKOUT frequency range (with /2 enabled) 1–5 MHz
Table 6-9. XCLKIN(1) Timing Requirements - PLL Enabled
NO. MIN MAX UNIT
C8 tc(CI) Cycle time, XCLKIN 33.3 200 ns
C9 tf(CI) Fall time, XCLKIN 6 ns
C10 tr(CI) Rise time, XCLKIN 6 ns
C11 tw(CIL) Pulse duration, XCLKIN low as a percentage of tc(OSCCLK) 45 55 %
C12 tw(CIH) Pulse duration, XCLKIN high as a percentage of tc(OSCCLK) 45 55 %
(1) This applies to the X1 pin also.
Table 6-10. XCLKIN(1) Timing Requirements - PLL Disabled
NO. MIN MAX UNIT
C8 tc(CI) Cycle time, XCLKIN 100-MHz device 10 250 ns
60-MHz device 16.67 250
C9 tf(CI) Fall time, XCLKIN Up to 20 MHz 6 ns
20 MHz to 100 MHz 2 ns
C10 tr(CI) Rise time, XCLKIN Up to 20 MHz 6 ns
20 MHz to 100 MHz 2 ns
C11 tw(CIL) Pulse duration, XCLKIN low as a percentage of tc(OSCCLK) 45 55 %
C12 tw(CIH) Pulse duration, XCLKIN high as a percentage of tc(OSCCLK) 45 55 %
(1) This applies to the X1 pin also.
The possible configuration modes are shown in Table 3-17.
Table 6-11. XCLKOUT Switching Characteristics (PLL Bypassed or Enabled)(1) (2)
NO. PARAMETER MIN TYP MAX UNIT
100-MHz device 10
C1 tc(XCO) Cycle time, XCLKOUT ns
60-MHz device 16.67
C3 tf(XCO) Fall time, XCLKOUT 2 ns
C4 tr(XCO) Rise time, XCLKOUT 2 ns
C5 tw(XCOL) Pulse duration, XCLKOUT low H 2 H + 2 ns
C6 tw(XCOH) Pulse duration, XCLKOUT high H 2 H + 2 ns
tpPLL lock time 131072tc(OSCCLK) (3) cycles
(1) A load of 40 pF is assumed for these parameters.
(2) H = 0.5tc(XCO)
(3) OSCCLK is either the output of the on-chip oscillator or the output from an external oscillator.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 105
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
C4
C3
XCLKOUT(B)
XCLKIN(A)
C5
C9
C10
C1
C8
C6
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. The relationship of XCLKIN to XCLKOUT depends on the divide factor chosen. The waveform relationship shown is
intended to illustrate the timing parameters only and may differ based on actual configuration.
B. XCLKOUT configured to reflect SYSCLKOUT.
Figure 6-7. Clock Timing
6.8 Power Sequencing
No requirements are placed on the power up/down sequence of the various power pins to ensure the
correct reset state for all the modules. However, if the 3.3-V transistors in the level shifting output buffers
of the I/O pins are powered prior to the 1.8-V transistors, it is possible for the output buffers to turn on,
causing a glitch to occur on the pin during power up. To avoid this behavior, power the VDD (core voltage)
pins prior to or simultaneously with the VDDIO (input/output voltage) pins, ensuring that the VDD pins have
reached 0.7 V before the VDDIO pins reach 0.7 V.
There are some requirements on the XRS pin:
1. During power up, the XRS pin must be held low for tw(RSL1) after the input clock is stable (see Table 6-
13). This is to enable the entire device to start from a known condition.
2. During power down, the XRS pin must be pulled low at least 8 μs prior to VDD reaching 1.5 V. This is to
enhance flash reliability.
No voltage larger than a diode drop (0.7 V) above VDDIO should be applied to any digital pin (for analog
pins, it is 0.7 V above VDDA) prior to powering up the device. Furthermore, VDDIO and VDDA should always
be within 0.3 V of each other. Voltages applied to pins on an unpowered device can bias internal p-n
junctions in unintended ways and produce unpredictable results.
6.8.1 Power Management and Supervisory Circuit Solutions
Table 6-12 lists the power management and supervisory circuit solutions for 280x DSPs. LDO selection
depends on the total power consumed in the end application. Go to http://www.power.ti.com for a
complete list of TI power ICs.
Table 6-12. Power Management and Supervisory Circuit Solutions
SUPPLIER TYPE PART DESCRIPTION
Texas Instruments LDO TPS767D301 Dual 1-A low-dropout regulator (LDO) with supply voltage supervisor (SVS)
Texas Instruments LDO TPS70202 Dual 500/250-mA LDO with SVS
Texas Instruments LDO TPS766xx 250-mA LDO with PG
Texas Instruments SVS TPS3808 Open Drain SVS with programmable delay
Texas Instruments SVS TPS3803 Low-cost Open-drain SVS with 5 μS delay
Texas Instruments LDO TPS799xx 200-mA LDO in WCSP package
Texas Instruments LDO TPS736xx 400-mA LDO with 40 mV of VDO
Texas Instruments DC/DC TPS62110 High Vin 1.2-A dc/dc converter in 4x4 QFN package
Texas Instruments DC/DC TPS6230x 500-mA converter in WCSP package
106 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
tw(RSL1)
th(boot-mode)(B)
VDDIO, VDD3VFL
VDDA2, VDDAIO
(3.3 V)
XCLKIN
X1/X2
XRS
Boot-Mode
Pins
VDD, VDD1A18,
VDD2A18
(1.8 V)
XCLKOUT
I/O Pins(C)
User-Code Dependent
User-Code Dependent
Boot-ROM Execution Starts Peripheral/GPIO Function
Based on Boot Code
GPIO Pins as Input
OSCCLK/8(A)
GPIO Pins as Input (State Depends on Internal PU/PD)
tOSCST
User-Code Dependent
Address/Data/
Control
(Internal)
Address/Data Valid. Internal Boot-ROM Code Execution Phase
User-Code Execution Phase
td(EX)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
A. Upon power up, SYSCLKOUT is OSCCLK/2. Since the XCLKOUTDIV bits in the XCLK register come up with a reset
state of 0, SYSCLKOUT is further divided by 4 before it appears at XCLKOUT. This explains why XCLKOUT =
OSCCLK/8 during this phase.
B. After reset, the boot ROM code samples Boot Mode pins. Based on the status of the Boot Mode pin, the boot code
branches to destination memory or boot code function. If boot ROM code executes after power-on conditions (in
debugger environment), the boot code execution time is based on the current SYSCLKOUT speed. The SYSCLKOUT
will be based on user environment and could be with or without PLL enabled.
C. See Section 6.8 for requirements to ensure a high-impedance state for GPIO pins during power-up.
Figure 6-8. Power-on Reset
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 107
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
th(boot-mode)(A)
tw(RSL2)
XCLKIN
X1/X2
XRS
Boot-Mode
Pins
XCLKOUT
I/O Pins
Address/Data/
Control
(Internal)
Boot-ROM Execution Starts
User-Code Execution Starts
User-Code Dependent
User-Code Execution Phase
(Don’t Care)
User-Code Dependent
User-Code Execution
Peripheral/GPIO Function
User-Code Dependent
GPIO Pins as Input (State Depends on Internal PU/PD)
GPIO Pins as Input Peripheral/GPIO Function
td(EX)
OSCCLK * 5
OSCCLK/8
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-13. Reset (XRS) Timing Requirements
MIN NOM MAX UNIT
tw(RSL1) (1) Pulse duration, stable XCLKIN to XRS high 8tc(OSCCLK) cycles
tw(RSL2) Pulse duration, XRS low Warm reset 8tc(OSCCLK) cycles
Pulse duration, reset pulse generated by
tw(WDRS) 512tc(OSCCLK) cycles
watchdog
td(EX) Delay time, address/data valid after XRS high 32tc(OSCCLK) cycles
tOSCST (2) Oscillator start-up time 1 10 ms
th(boot-mode) Hold time for boot-mode pins 200tc(OSCCLK) cycles
(1) In addition to the tw(RSL1) requirement, XRS has to be low at least for 1 ms after VDD reaches 1.5 V.
(2) Dependent on crystal/resonator and board design.
A. After reset, the Boot ROM code samples BOOT Mode pins. Based on the status of the Boot Mode pin, the boot code
branches to destination memory or boot code function. If Boot ROM code executes after power-on conditions (in
debugger environment), the Boot code execution time is based on the current SYSCLKOUT speed. The
SYSCLKOUT will be based on user environment and could be with or without PLL enabled.
Figure 6-9. Warm Reset
108 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
GPIO
tr(GPO)
tf(GPO)
OSCCLK
SYSCLKOUT
Write to PLLCR
OSCCLK * 2
(Current CPU
Frequency)
OSCCLK/2
(CPU Frequency While PLL is Stabilizing
With the Desired Frequency. This Period
(PLL Lock-up Time, tp) is
131072 OSCCLK Cycles Long.)
OSCCLK * 4
(Changed CPU Frequency)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 6-10 shows an example for the effect of writing into PLLCR register. In the first phase, PLLCR =
0x0004 and SYSCLKOUT = OSCCLK x 2. The PLLCR is then written with 0x0008. Right after the PLLCR
register is written, the PLL lock-up phase begins. During this phase, SYSCLKOUT = OSCCLK/2. After the
PLL lock-up is complete (which takes 131072 OSCCLK cycles), SYSCLKOUT reflects the new operating
frequency, OSCCLK x 4.
Figure 6-10. Example of Effect of Writing Into PLLCR Register
6.9 General-Purpose Input/Output (GPIO)
6.9.1 GPIO - Output Timing
Table 6-14. General-Purpose Output Switching Characteristics
PARAMETER MIN MAX UNIT
tr(GPO) Rise time, GPIO switching low to high All GPIOs 8 ns
tf(GPO) Fall time, GPIO switching high to low All GPIOs 8 ns
tfGPO Toggling frequency, GPO pins 25 MHz
Figure 6-11. General-Purpose Output Timing
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 109
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
GPIO Signal
1
Sampling Window
Output From
Qualifier
1 1 1111111110000000 000
SYSCLKOUT
QUALPRD = 1
(SYSCLKOUT/2)
(SYSCLKOUT cycle * 2 * QUALPRD) * 5(C))
(A)
GPxQSELn = 1,0 (6 samples)
Sampling Period determined
by GPxCTRL[QUALPRD](B)
(D)
tw(SP)
tw(IQSW)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.9.2 GPIO - Input Timing
A. This glitch will be ignored by the input qualifier. The QUALPRD bit field specifies the qualification sampling period. It
can vary from 00 to 0xFF. If QUALPRD = 00, then the sampling period is 1 SYSCLKOUT cycle. For any other value
"n", the qualification sampling period in 2n SYSCLKOUT cycles (that is, at every 2n SYSCLKOUT cycles, the GPIO
pin will be sampled).
B. The qualification period selected via the GPxCTRL register applies to groups of 8 GPIO pins.
C. The qualification block can take either three or six samples. The GPxQSELn Register selects which sample mode is
used.
D. In the example shown, for the qualifier to detect the change, the input should be stable for 10 SYSCLKOUT cycles or
greater. In other words, the inputs should be stable for (5 x QUALPRD x 2) SYSCLKOUT cycles. This would ensure
5 sampling periods for detection to occur. Since external signals are driven asynchronously, an 13-SYSCLKOUT-wide
pulse ensures reliable recognition.
Figure 6-12. Sampling Mode
Table 6-15. General-Purpose Input Timing Requirements
MIN MAX UNIT
QUALPRD = 0 1tc(SCO) cycles
tw(SP) Sampling period QUALPRD 0 2tc(SCO) * QUALPRD cycles
tw(IQSW) Input qualifier sampling window tw(SP) * (n(1) 1) cycles
Synchronous mode 2tc(SCO) cycles
tw(GPI) (2) Pulse duration, GPIO low/high With input qualifier tw(IQSW) + tw(SP) + 1tc(SCO) cycles
(1) "n" represents the number of qualification samples as defined by GPxQSELn register.
(2) For tw(GPI), pulse width is measured from VIL to VIL for an active low signal and VIH to VIH for an active high signal.
110 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
GPIOxn
XCLKOUT
tw(GPI)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.9.3 Sampling Window Width for Input Signals
The following section summarizes the sampling window width for input signals for various input qualifier
configurations.
Sampling frequency denotes how often a signal is sampled with respect to SYSCLKOUT.
Sampling frequency = SYSCLKOUT/(2 * QUALPRD), if QUALPRD 0
Sampling frequency = SYSCLKOUT, if QUALPRD = 0
Sampling period = SYSCLKOUT cycle x 2 x QUALPRD, if QUALPRD 0
In the above equations, SYSCLKOUT cycle indicates the time period of SYSCLKOUT.
Sampling period = SYSCLKOUT cycle, if QUALPRD = 0
In a given sampling window, either 3 or 6 samples of the input signal are taken to determine the validity of
the signal. This is determined by the value written to GPxQSELn register.
Case 1:
Qualification using 3 samples
Sampling window width = (SYSCLKOUT cycle x 2 x QUALPRD) x 2, if QUALPRD 0
Sampling window width = (SYSCLKOUT cycle) x 2, if QUALPRD = 0
Case 2:
Qualification using 6 samples
Sampling window width = (SYSCLKOUT cycle x 2 x QUALPRD) x 5, if QUALPRD 0
Sampling window width = (SYSCLKOUT cycle) x 5, if QUALPRD = 0
Figure 6-13. General-Purpose Input Timing
NOTE
The pulse-width requirement for general-purpose input is applicable for the XINT2_ADCSOC
signal as well.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 111
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
WAKE INT(A)
XCLKOUT
Address/Data
(internal)
td(WAKE−IDLE)
tw(WAKE−INT)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.9.4 Low-Power Mode Wakeup Timing
Table 6-16 shows the timing requirements, Table 6-17 shows the switching characteristics, and Figure 6-
14 shows the timing diagram for IDLE mode.
Table 6-16. IDLE Mode Timing Requirements(1)
MIN NOM MAX UNIT
Without input qualifier 2tc(SCO)
tw(WAKE-INT) Pulse duration, external wake-up signal cycles
With input qualifier 5tc(SCO) + tw(IQSW)
(1) For an explanation of the input qualifier parameters, see Table 6-15.
Table 6-17. IDLE Mode Switching Characteristics(1)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Delay time, external wake signal to
program execution resume (2)
Without input qualifier 20tc(SCO) cycles
Wake-up from Flash
Flash module in active state With input qualifier 20tc(SCO) + tw(IQSW)
td(WAKE-IDLE) Without input qualifier 1050tc(SCO) cycles
Wake-up from Flash
Flash module in sleep state With input qualifier 1050tc(SCO) + tw(IQSW)
Without input qualifier 20tc(SCO) cycles
Wake-up from SARAM With input qualifier 20tc(SCO) + tw(IQSW)
(1) For an explanation of the input qualifier parameters, see Table 6-15.
(2) This is the time taken to begin execution of the instruction that immediately follows the IDLE instruction. execution of an ISR (triggered
by the wake up) signal involves additional latency.
A. WAKE INT can be any enabled interrupt, WDINT, XNMI, or XRS.
Figure 6-14. IDLE Entry and Exit Timing
112 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
tw(WAKE-INT)
td(WAKE-STBY)
td(IDLE−XCOL)
Wake−up
Signal
X1/X2 or
X1 or
XCLKIN
XCLKOUT
STANDBY Normal ExecutionSTANDBY
Flushing Pipeline
(A) (B) (C) (D) (E) (F)
Device
Status
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 6-18. STANDBY Mode Timing Requirements
TEST CONDITIONS MIN NOM MAX UNIT
Without input qualification 3tc(OSCCLK)
Pulse duration, external
tw(WAKE-INT) cycles
wake-up signal With input qualification(1) (2 + QUALSTDBY) * tc(OSCCLK)
(1) QUALSTDBY is a 6-bit field in the LPMCR0 register.
Table 6-19. STANDBY Mode Switching Characteristics
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Delay time, IDLE instruction
td(IDLE-XCOL) 32tc(SCO) 45tc(SCO) cycles
executed to XCLKOUT low
Delay time, external wake signal
to program execution resume(1)
Without input qualifier 100tc(SCO)
Wake up from flash cycles
Flash module in active With input qualifier 100tc(SCO) + tw(WAKE-INT)
state
td(WAKE-STBY) Without input qualifier 1125tc(SCO)
Wake up from flash cycles
Flash module in sleep With input qualifier 1125tc(SCO) + tw(WAKE-INT)
state Without input qualifier 100tc(SCO) cycles
Wake up from SARAM With input qualifier 100tc(SCO) + tw(WAKE-INT)
(1) This is the time taken to begin execution of the instruction that immediately follows the IDLE instruction. execution of an ISR (triggered
by the wake up signal) involves additional latency.
A. IDLE instruction is executed to put the device into STANDBY mode.
B. The PLL block responds to the STANDBY signal. SYSCLKOUT is held for approximately 32 cycles (if CLKINDIV = 0)
or 64 cycles (if CLKINDIV = 1) before being turned off. This delay enables the CPU pipe and any other pending
operations to flush properly.
C. Clock to the peripherals are turned off. However, the PLL and watchdog are not shut down. The device is now in
STANDBY mode.
D. The external wake-up signal is driven active.
E. After a latency period, the STANDBY mode is exited.
F. Normal execution resumes. The device will respond to the interrupt (if enabled).
Figure 6-15. STANDBY Entry and Exit Timing Diagram
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 113
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
td(IDLE−XCOL)
X1/X2
or XCLKIN
XCLKOUT
HALT HALT
Wake-up Latency
Flushing Pipeline
td(WAKE−HALT)
(A) (B) (C) (D)
Device
Status
(E) (G)
(F)
PLL Lock-up Time Normal
Execution
tw(WAKE-GPIO) tp
GPIOn
Oscillator Start-up Time
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-20. HALT Mode Timing Requirements
MIN NOM MAX UNIT
tw(WAKE-GPIO) Pulse duration, GPIO wake-up signal toscst + 2tc(OSCCLK) (1) cycles
tw(WAKE-XRS) Pulse duration, XRS wakeup signal toscst + 8tc(OSCCLK) cycles
(1) See Table 6-13 for an explanation of toscst.
Table 6-21. HALT Mode Switching Characteristics
PARAMETER MIN TYP MAX UNIT
td(IDLE-XCOL) Delay time, IDLE instruction executed to XCLKOUT low 32tc(SCO) 45tc(SCO) cycles
tpPLL lock-up time 131072tc(OSCCLK) cycles
Delay time, PLL lock to program execution resume 1125tc(SCO) cycles
Wake up from flash
td(WAKE-HALT) Flash module in sleep state
35tc(SCO) cycles
Wake up from SARAM
A. IDLE instruction is executed to put the device into HALT mode.
B. The PLL block responds to the HALT signal. SYSCLKOUT is held for approximately 32 cycles (if CLKINDIV = 0) or
64 cycles (if CLKINDIV = 1) before the oscillator is turned off and the CLKIN to the core is stopped. This delay
enables the CPU pipe and any other pending operations to flush properly.
C. Clocks to the peripherals are turned off and the PLL is shut down. If a quartz crystal or ceramic resonator is used as
the clock source, the internal oscillator is shut down as well. The device is now in HALT mode and consumes
absolute minimum power.
D. When the GPIOn pin (used to bring the device out of HALT) is driven low, the oscillator is turned on and the oscillator
wake-up sequence is initiated. The GPIO pin should be driven high only after the oscillator has stabilized. This
enables the provision of a clean clock signal during the PLL lock sequence. Since the falling edge of the GPIO pin
asynchronously begins the wakeup process, care should be taken to maintain a low noise environment prior to
entering and during HALT mode.
E. Once the oscillator has stabilized, the PLL lock sequence is initiated, which takes 131,072 OSCCLK (X1/X2 or X1 or
XCLKIN) cycles. Note that these 131,072 clock cycles are applicable even when the PLL is disabled (that is, code
execution will be delayed by this duration even when the PLL is disabled).
F. Clocks to the core and peripherals are enabled. The HALT mode is now exited. The device will respond to the
interrupt (if enabled), after a latency.
G. Normal operation resumes.
Figure 6-16. HALT Wake-Up Using GPIOn
114 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
PWM(B)
TZ
XCLKOUT(A)
tw(TZ)
td(TZ-PWM)HZ
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.10 Enhanced Control Peripherals
6.10.1 Enhanced Pulse Width Modulator (ePWM) Timing
PWM refers to PWM outputs on ePWM1–6. Table 6-22 shows the PWM timing requirements and Table 6-
23, switching characteristics.
Table 6-22. ePWM Timing Requirements(1)
TEST CONDITIONS MIN MAX UNIT
tw(SYCIN) Sync input pulse width Asynchronous 2tc(SCO) cycles
Synchronous 2tc(SCO) cycles
With input qualifier 1tc(SCO) + tw(IQSW) cycles
(1) For an explanation of the input qualifier parameters, see Table 6-15.
Table 6-23. ePWM Switching Characteristics
PARAMETER TEST CONDITIONS MIN MAX UNIT
tw(PWM) Pulse duration, PWMx output high/low 20 ns
tw(SYNCOUT) Sync output pulse width 8tc(SCO) cycles
td(PWM)tza Delay time, trip input active to PWM forced high no pin load 25 ns
Delay time, trip input active to PWM forced low
td(TZ-PWM)HZ Delay time, trip input active to PWM Hi-Z 20 ns
6.10.2 Trip-Zone Input Timing
A. TZ: TZ1, TZ2, TZ3, TZ4, TZ5, TZ6
B. PWM refers to all the PWM pins in the device. The state of the PWM pins after TZ is taken high depends on the PWM
recovery software.
Figure 6-17. PWM Hi-Z Characteristics
Table 6-24. Trip-Zone input Timing Requirements(1)
MIN MAX UNIT
tw(TZ) Pulse duration, TZx input low Asynchronous 1tc(SCO) cycles
Synchronous 2tc(SCO) cycles
With input qualifier 1tc(SCO) + tw(IQSW) cycles
(1) For an explanation of the input qualifier parameters, see Table 6-15.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 115
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-25 shows the high-resolution PWM switching characteristics.
Table 6-25. High-Resolution PWM Characteristics at SYSCLKOUT = 60–100 MHz
MIN TYP MAX UNIT
Micro Edge Positioning (MEP) step size(1) 150 310 ps
(1) Maximum MEP step size is based on worst-case process, maximum temperature and maximum voltage. MEP step size will increase
with low voltage and high temperature and decrease with voltage and cold temperature.
Applications that use the HRPWM feature should use MEP Scale Factor Optimizer (SFO) estimation software functions. See the TI
software libraries for details of using SFO function in end applications. SFO functions help to estimate the number of MEP steps per
SYSCLKOUT period dynamically while the HRPWM is in operation.
Table 6-26 shows the eCAP timing requirement and Table 6-27 shows the eCAP switching characteristics.
Table 6-26. Enhanced Capture (eCAP) Timing Requirement(1)
TEST CONDITIONS MIN MAX UNIT
tw(CAP) Capture input pulse width Asynchronous 2tc(SCO) cycles
Synchronous 2tc(SCO)
With input qualifier 1tc(SCO) + tw(IQSW)
(1) For an explanation of the input qualifier parameters, see Table 6-15.
Table 6-27. eCAP Switching Characteristics
PARAMETER TEST CONDITIONS MIN MAX UNIT
tw(APWM) Pulse duration, APWMx output high/low 20 ns
Table 6-28 shows the eQEP timing requirement and Table 6-29 shows the eQEP switching
characteristics.
Table 6-28. Enhanced Quadrature Encoder Pulse (eQEP) Timing Requirements(1)
TEST CONDITIONS MIN MAX UNIT
tw(QEPP) QEP input period Asynchronous(2)/synchronous 2tc(SCO) cycles
With input qualifier 2[1tc(SCO) + tw(IQSW)]
tw(INDEXH) QEP Index Input High time Asynchronous(2)/synchronous 2tc(SCO) cycles
With input qualifier 2tc(SCO) +tw(IQSW)
tw(INDEXL) QEP Index Input Low time Asynchronous(2)/synchronous 2tc(SCO) cycles
With input qualifier 2tc(SCO) + tw(IQSW)
tw(STROBH) QEP Strobe High time Asynchronous(2)/synchronous 2tc(SCO) cycles
With input qualifier 2tc(SCO) + tw(IQSW)
tw(STROBL) QEP Strobe Input Low time Asynchronous(2)/synchronous 2tc(SCO) cycles
With input qualifier 2tc(SCO) +tw(IQSW)
(1) For an explanation of the input qualifier parameters, see Table 6-15.
(2) Refer to the TMS320F280x, TMS320C280x, and TMS320F2801x DSC Silicon Errata (literature number SPRZ171) for limitations in the
asynchronous mode.
Table 6-29. eQEP Switching Characteristics
PARAMETER TEST CONDITIONS MIN MAX UNIT
td(CNTR)xin Delay time, external clock to counter increment 4tc(SCO) cycles
td(PCS-OUT)QEP Delay time, QEP input edge to position compare sync output 6tc(SCO) cycles
116 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
XNMI, XINT1, XINT2
tw(INT)
Interrupt Vector
td(INT)
Address bus
(internal)
ADCSOCAO
or
ADCSOCBO
tw(ADCSOCAL)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 6-30. External ADC Start-of-Conversion Switching Characteristics
PARAMETER MIN MAX UNIT
tw(ADCSOCAL) Pulse duration, ADCSOCAO low 32tc(HCO ) cycles
Figure 6-18. ADCSOCAO or ADCSOCBO Timing
6.10.3 External Interrupt Timing
Figure 6-19. External Interrupt Timing
Table 6-31. External Interrupt Timing Requirements(1)
TEST CONDITIONS MIN MAX UNIT
tw(INT) (2) Pulse duration, INT input low/high Synchronous 1tc(SCO) cycles
With qualifier 1tc(SCO) + tw(IQSW)
(1) For an explanation of the input qualifier parameters, see Table 6-15.
(2) This timing is applicable to any GPIO pin configured for ADCSOC functionality.
Table 6-32. External Interrupt Switching Characteristics(1)
PARAMETER MIN MAX UNIT
td(INT) Delay time, INT low/high to interrupt-vector fetch tw(IQSW) + 12tc(SCO) cycles
(1) For an explanation of the input qualifier parameters, see Table 6-15.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 117
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.10.4 I2C Electrical Specification and Timing
Table 6-33. I2C Timing
TEST CONDITIONS MIN MAX UNIT
fSCL SCL clock frequency I2C clock module frequency is between 400 kHz
7 MHz and 12 MHz and I2C prescaler and
clock divider registers are configured
appropriately
Vil Low level input voltage 0.3 VDDIO V
Vih High level input voltage 0.7 VDDIO V
Vhys Input hysteresis 0.05 VDDIO V
Vol Low level output voltage 3 mA sink current 0 0.4 V
tLOW Low period of SCL clock I2C clock module frequency is between 1.3 μs
7 MHz and 12 MHz and I2C prescaler and
clock divider registers are configured
appropriately
tHIGH High period of SCL clock I2C clock module frequency is between 0.6 μs
7 MHz and 12 MHz and I2C prescaler and
clock divider registers are configured
appropriately
lIInput current with an input voltage –10 10 μA
between 0.1 VDDIO and 0.9 VDDIO MAX
6.10.5 Serial Peripheral Interface (SPI) Master Mode Timing
Table 6-34 lists the master mode timing (clock phase = 0) and Table 6-35 lists the timing (clock
phase = 1). Figure 6-20 and Figure 6-21 show the timing waveforms.
118 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 6-34. SPI Master Mode External Timing (Clock Phase = 0)(1) (2) (3) (4) (5)
SPI WHEN (SPIBRR + 1) IS EVEN OR SPI WHEN (SPIBRR + 1) IS ODD AND
SPIBRR = 0 OR 2 SPIBRR > 3
NO. UNIT
MIN MAX MIN MAX
1 tc(SPC)M Cycle time, SPICLK 4tc(LCO) 128tc(LCO) 5tc(LCO) 127tc(LCO) ns
tw(SPCH)M Pulse duration, SPICLK high 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M 0.5tc(LCO) 10 0.5tc(SPC)M 0.5tc(LCO)
(clock polarity = 0)
2 ns
tw(SPCL)M Pulse duration, SPICLK low 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M 0.5tc(LCO) 10 0.5tc(SPC)M 0.5tc(LCO)
(clock polarity = 1)
tw(SPCL)M Pulse duration, SPICLK low 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M + 0.5tc(LCO) 10 0.5tc(SPC)M + 0.5tc(LCO)
(clock polarity = 0)
3 ns
tw(SPCH)M Pulse duration, SPICLK high 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M + 0.5tc(LCO) 10 0.5tc(SPC)M + 0.5tc(LCO)
(clock polarity = 1)
td(SPCH-SIMO)M Delay time, SPICLK high to SPISIMO 10 10
valid (clock polarity = 0)
4 ns
td(SPCL-SIMO)M Delay time, SPICLK low to SPISIMO 10 10
valid (clock polarity = 1)
tv(SPCL-SIMO)M Valid time, SPISIMO data valid after 0.5tc(SPC)M 10 0.5tc(SPC)M + 0.5tc(LCO) 10
SPICLK low (clock polarity = 0)
5 ns
tv(SPCH-SIMO)M Valid time, SPISIMO data valid after 0.5tc(SPC)M 10 0.5tc(SPC)M + 0.5tc(LCO) 10
SPICLK high (clock polarity = 1)
tsu(SOMI-SPCL)M Setup time, SPISOMI before SPICLK 35 35
low (clock polarity = 0)
8 ns
tsu(SOMI-SPCH)M Setup time, SPISOMI before SPICLK 35 35
high (clock polarity = 1)
tv(SPCL-SOMI)M Valid time, SPISOMI data valid after 0.25tc(SPC)M 10 0.5tc(SPC)M 0.5tc(LCO) 10
SPICLK low (clock polarity = 0)
9 ns
tv(SPCH-SOMI)M Valid time, SPISOMI data valid after 0.25tc(SPC)M 10 0.5tc(SPC)M 0.5tc(LCO) 10
SPICLK high (clock polarity = 1)
(1) The MASTER / SLAVE bit (SPICTL.2) is set and the CLOCK PHASE bit (SPICTL.3) is cleared.
(2) tc(SPC) = SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR +1)
(3) tc(LCO) = LSPCLK cycle time
(4) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 25-MHz MAX, master mode receive 12.5-MHz MAX
Slave mode transmit 12.5-MAX, slave mode receive 12.5-MHz MAX.
(5) The active edge of the SPICLK signal referenced is controlled by the clock polarity bit (SPICCR.6).
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 119
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
9
4
SPISOMI
SPISIMO
SPICLK
(clock polarity = 1)
SPICLK
(clock polarity = 0)
Master In Data
Must Be Valid
Master Out Data Is Valid
8
5
3
2
1
SPISTE(A)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. In the master mode, SPISTE goes active 0.5tc(SPC) (minimum) before valid SPI clock edge. On the trailing end of the word, the SPISTE will go inactive 0.5tc(SPC) after
the receiving edge (SPICLK) of the last data bit, except that SPISTE stays active between back-to-back transmit words in both FIFO and non-FIFO modes.
Figure 6-20. SPI Master Mode External Timing (Clock Phase = 0)
120 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 6-35. SPI Master Mode External Timing (Clock Phase = 1)(1) (2) (3) (4) (5)
SPI WHEN (SPIBRR + 1) IS EVEN OR SPI WHEN (SPIBRR + 1) IS ODD AND
SPIBRR = 0 OR 2 SPIBRR > 3
NO. UNIT
MIN MAX MIN MAX
1 tc(SPC)M Cycle time, SPICLK 4tc(LCO) 128tc(LCO) 5tc(LCO) 127tc(LCO) ns
tw(SPCH)M Pulse duration, SPICLK high 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M 0.5tc (LCO) 10 0.5tc(SPC)M 0.5tc(LCO)
(clock polarity = 0)
2 ns
tw(SPCL))M Pulse duration, SPICLK low 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M 0.5tc (LCO) 10 0.5tc(SPC)M 0.5tc(LCO
(clock polarity = 1)
tw(SPCL)M Pulse duration, SPICLK low 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M + 0.5tc(LCO) 10 0.5tc(SPC)M + 0.5tc(LCO)
(clock polarity = 0)
3 ns
tw(SPCH)M Pulse duration, SPICLK high 0.5tc(SPC)M 10 0.5tc(SPC)M 0.5tc(SPC)M + 0.5tc(LCO) 10 0.5tc(SPC)M + 0.5tc(LCO)
(clock polarity = 1)
tsu(SIMO-SPCH)M Setup time, SPISIMO data valid 0.5tc(SPC)M 10 0.5tc(SPC)M 10
before SPICLK high
(clock polarity = 0)
6 ns
tsu(SIMO-SPCL)M Setup time, SPISIMO data valid 0.5tc(SPC)M 10 0.5tc(SPC)M 10
before SPICLK low
(clock polarity = 1)
tv(SPCH-SIMO)M Valid time, SPISIMO data valid after 0.5tc(SPC)M 10 0.5tc(SPC)M 10
SPICLK high (clock polarity = 0)
7 ns
tv(SPCL-SIMO)M Valid time, SPISIMO data valid after 0.5tc(SPC)M 10 0.5tc(SPC)M 10
SPICLK low (clock polarity = 1)
tsu(SOMI-SPCH)M Setup time, SPISOMI before 35 35
SPICLK high (clock polarity = 0)
10 ns
tsu(SOMI-SPCL)M Setup time, SPISOMI before 35 35
SPICLK low (clock polarity = 1)
tv(SPCH-SOMI)M Valid time, SPISOMI data valid after 0.25tc(SPC)M 10 0.5tc(SPC)M 10
SPICLK high (clock polarity = 0)
11 ns
tv(SPCL-SOMI)M Valid time, SPISOMI data valid after 0.25tc(SPC)M 10 0.5tc(SPC)M 10
SPICLK low (clock polarity = 1)
(1) The MASTER/SLAVE bit (SPICTL.2) is set and the CLOCK PHASE bit (SPICTL.3) is set.
(2) tc(SPC) = SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR + 1)
(3) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 25 MHz MAX, master mode receive 12.5 MHz MAX
Slave mode transmit 12.5 MHz MAX, slave mode receive 12.5 MHz MAX.
(4) tc(LCO) = LSPCLK cycle time
(5) The active edge of the SPICLK signal referenced is controlled by the CLOCK POLARITY bit (SPICCR.6).
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 121
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Data Valid
11
SPISOMI
SPISIMO
SPICLK
(clock polarity = 1)
SPICLK
(clock polarity = 0)
Master In Data Must
Be Valid
Master Out Data Is Valid
1
7
6
10
3
2
SPISTE(A)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
A. In the master mode, SPISTE goes active 0.5tc(SPC) (minimum) before valid SPI clock edge. On the trailing end of the word, the SPISTE will go inactive 0.5tc(SPC) after
the receiving edge (SPICLK) of the last data bit, except that SPISTE stays active between back-to-back transmit words in both FIFO and non-FIFO modes.
Figure 6-21. SPI Master Mode External Timing (Clock Phase = 1)
122 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
20
15
SPISIMO
SPISOMI
SPICLK
(clock polarity = 1)
SPICLK
(clock polarity = 0)
SPISIMO Data
Must Be Valid
SPISOMI Data Is Valid
19
16
14
13
12
SPISTE(A)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.10.6 SPI Slave Mode Timing
Table 6-36 lists the slave mode external timing (clock phase = 0) and Table 6-37 (clock phase = 1).
Figure 6-22 and Figure 6-23 show the timing waveforms.
Table 6-36. SPI Slave Mode External Timing (Clock Phase = 0)(1) (2) (3) (4) (5)
NO. MIN MAX UNIT
12 tc(SPC)S Cycle time, SPICLK 4tc(LCO) ns
tw(SPCH)S Pulse duration, SPICLK high (clock polarity = 0) 0.5tc(SPC)S 10 0.5tc(SPC)S
13 ns
tw(SPCL)S Pulse duration, SPICLK low (clock polarity = 1) 0.5tc(SPC)S 10 0.5tc(SPC)S
tw(SPCL)S Pulse duration, SPICLK low (clock polarity = 0) 0.5tc(SPC)S 10 0.5tc(SPC)S
14 ns
tw(SPCH)S Pulse duration, SPICLK high (clock polarity = 1) 0.5tc(SPC)S 10 0.5tc(SPC)S
td(SPCH-SOMI)S Delay time, SPICLK high to SPISOMI valid (clock polarity = 0) 35
15 ns
td(SPCL-SOMI)S Delay time, SPICLK low to SPISOMI valid (clock polarity = 1) 35
tv(SPCL-SOMI)S Valid time, SPISOMI data valid after SPICLK low (clock polarity = 0) 0.75tc(SPC)S
16 ns
tv(SPCH-SOMI)S Valid time, SPISOMI data valid after SPICLK high (clock polarity = 1) 0.75tc(SPC)S
tsu(SIMO-SPCL)S Setup time, SPISIMO before SPICLK low (clock polarity = 0) 35
19 ns
tsu(SIMO-SPCH)S Setup time, SPISIMO before SPICLK high (clock polarity = 1) 35
tv(SPCL-SIMO)S Valid time, SPISIMO data valid after SPICLK low (clock polarity = 0) 0.5tc(SPC)S 10
20 ns
tv(SPCH-SIMO)S Valid time, SPISIMO data valid after SPICLK high (clock polarity = 1) 0.5tc(SPC)S 10
(1) The MASTER / SLAVE bit (SPICTL.2) is cleared and the CLOCK PHASE bit (SPICTL.3) is cleared.
(2) tc(SPC) = SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR + 1)
(3) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 25-MHz MAX, master mode receive 12.5-MHz MAX
Slave mode transmit 12.5-MHz MAX, slave mode receive 12.5-MHz MAX.
(4) tc(LCO) = LSPCLK cycle time
(5) The active edge of the SPICLK signal referenced is controlled by the CLOCK POLARITY bit (SPICCR.6).
A. In the slave mode, the SPISTE signal should be asserted low at least 0.5tc(SPC) (minimum) before the valid SPI clock
edge and remain low for at least 0.5tc(SPC) after the receiving edge (SPICLK) of the last data bit.
Figure 6-22. SPI Slave Mode External Timing (Clock Phase = 0)
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 123
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Data Valid
22
SPISIMO
SPISOMI
SPICLK
(clock polarity = 1)
SPICLK
(clock polarity = 0)
SPISIMO Data
Must Be Valid
SPISOMI Data Is Valid
21
12
18
17
14
13
SPISTE(A)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-37. SPI Slave Mode External Timing (Clock Phase = 1)(1) (2) (3) (4)
NO. MIN MAX UNIT
12 tc(SPC)S Cycle time, SPICLK 8tc(LCO) ns
tw(SPCH)S Pulse duration, SPICLK high (clock polarity = 0) 0.5tc(SPC)S 10 0.5tc(SPC)S
13 ns
tw(SPCL)S Pulse duration, SPICLK low (clock polarity = 1) 0.5tc(SPC)S 10 0.5tc(SPC) S
tw(SPCL)S Pulse duration, SPICLK low (clock polarity = 0) 0.5tc(SPC)S 10 0.5tc(SPC) S
14 ns
tw(SPCH)S Pulse duration, SPICLK high (clock polarity = 1) 0.5tc(SPC)S 10 0.5tc(SPC)S
tsu(SOMI-SPCH)S Setup time, SPISOMI before SPICLK high (clock polarity = 0) 0.125tc(SPC)S
17 ns
tsu(SOMI-SPCL)S Setup time, SPISOMI before SPICLK low 0.125tc(SPC)S
(clock polarity = 1)
tv(SPCL-SOMI)S Valid time, SPISOMI data valid after SPICLK low 0.75tc(SPC)S
(clock polarity = 1)
18 ns
tv(SPCH-SOMI)S Valid time, SPISOMI data valid after SPICLK high 0.75tc(SPC) S
(clock polarity = 0)
tsu(SIMO-SPCH)S Setup time, SPISIMO before SPICLK high (clock polarity = 0) 35
21 ns
tsu(SIMO-SPCL)S Setup time, SPISIMO before SPICLK low (clock polarity = 1) 35
tv(SPCH-SIMO)S Valid time, SPISIMO data valid after SPICLK high 0.5tc(SPC)S 10
(clock polarity = 0)
22 ns
tv(SPCL-SIMO)S Valid time, SPISIMO data valid after SPICLK low 0.5tc(SPC)S 10
(clock polarity = 1)
(1) The MASTER / SLAVE bit (SPICTL.2) is cleared and the CLOCK PHASE bit (SPICTL.3) is cleared.
(2) tc(SPC) = SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR + 1)
(3) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 25-MHz MAX, master mode receive 12.5-MHz MAX
Slave mode transmit 12.5-MHz MAX, slave mode receive 12.5-MHz MAX.
(4) The active edge of the SPICLK signal referenced is controlled by the CLOCK POLARITY bit (SPICCR.6).
A. In the slave mode, the SPISTE signal should be asserted low at least 0.5tc(SPC) before the valid SPI clock edge and
remain low for at least 0.5tc(SPC) after the receiving edge (SPICLK) of the last data bit.
Figure 6-23. SPI Slave Mode External Timing (Clock Phase = 1)
124 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.10.7 On-Chip Analog-to-Digital Converter
Table 6-38. ADC Electrical Characteristics (over recommended operating conditions)(1)(2)
PARAMETER MIN TYP MAX UNIT
DC SPECIFICATIONS
Resolution 12 Bits
ADC clock 60-MHz device 0.001 7.5 MHz
100-MHz device 0.001 12.5
100-MHz device (F2809 only) 0.001 25
ACCURACY
INL (Integral nonlinearity) 1–12.5 MHz ADC clock (6.25 MSPS) ±1.5 LSB
12.5–25 MHz ADC clock (12.5 MSPS) ±2
DNL (Differential nonlinearity)(3) ±1 LSB
Offset error(4) –60 +60 LSB
Offset error with hardware trimming ±4 LSB
Overall gain error with internal reference(5) –60 +60 LSB
Overall gain error with external reference –60 +60 LSB
Channel-to-channel offset variation ±4 LSB
Channel-to-channel gain variation ±4 LSB
ANALOG INPUT
Analog input voltage (ADCINx to ADCLO)(6) 0 3 V
ADCLO –5 0 5 mV
Input capacitance 10 pF
Input leakage current ±5 μA
INTERNAL VOLTAGE REFERENCE(5)
VADCREFP - ADCREFP output voltage at the pin 1.275 V
based on internal reference
VADCREFM - ADCREFM output voltage at the pin 0.525 V
based on internal reference
Voltage difference, ADCREFP - ADCREFM 0.75 V
Temperature coefficient 50 PPM/°C
EXTERNAL VOLTAGE REFERENCE(5) (7)
ADCREFSEL[15:14] = 11b 1.024 V
VADCREFIN - External reference voltage input on
ADCREFIN pin 0.2% or better accurate ADCREFSEL[15:14] = 10b 1.500 V
reference recommended ADCREFSEL[15:14] = 01b 2.048 V
AC SPECIFICATIONS
SINAD (100 kHz) Signal-to-noise ratio + 67.5 dB
distortion
SNR (100 kHz) Signal-to-noise ratio 68 dB
THD (100 kHz) Total harmonic distortion –79 dB
ENOB (100 kHz) Effective number of bits 10.9 Bits
SFDR (100 kHz) Spurious free dynamic range 83 dB
(1) Tested at 12.5 MHz ADCCLK.
(2) All voltages listed in this table are with respect to VSSA2.
(3) TI specifies that the ADC will have no missing codes.
(4) 1 LSB has the weighted value of 3.0/4096 = 0.732 mV.
(5) A single internal/external band gap reference sources both ADCREFP and ADCREFM signals, and hence, these voltages track
together. The ADC converter uses the difference between these two as its reference. The total gain error listed for the internal reference
is inclusive of the movement of the internal bandgap over temperature. Gain error over temperature for the external reference option will
depend on the temperature profile of the source used.
(6) Voltages above VDDA + 0.3 V or below VSS - 0.3 V applied to an analog input pin may temporarily affect the conversion of another pin.
To avoid this, the analog inputs should be kept within these limits.
(7) TI recommends using high precision external reference TI part REF3020/3120 or equivalent for 2.048-V reference.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 125
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ADC Power Up Delay ADC Ready for Conversions
PWDNBG
PWDNREF
PWDNADC
Request for
ADC
Conversion
td(BGR)
td(PWD)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.10.7.1 ADC Power-Up Control Bit Timing
Figure 6-24. ADC Power-Up Control Bit Timing
Table 6-39. ADC Power-Up Delays
PARAMETER(1) MIN TYP MAX UNIT
td(BGR) Delay time for band gap reference to be stable. Bits 7 and 6 of the ADCTRL3 5 ms
register (ADCBGRFDN1/0) must be set to 1 before the PWDNADC bit is enabled.
td(PWD) Delay time for power-down control to be stable. Bit delay time for band-gap 20 50 μs
reference to be stable. Bits 7 and 6 of the ADCTRL3 register (ADCBGRFDN1/0) 1 ms
must be set to 1 before the PWDNADC bit is enabled. Bit 5 of the ADCTRL3
register (PWDNADC)must be set to 1 before any ADC conversions are initiated.
(1) Timings maintain compatibility to the 281x ADC module. The 280x ADC also supports driving all 3 bits at the same time and waiting
td(BGR) ms before first conversion.
Table 6-40. Current Consumption for Different ADC Configurations (at 12.5-MHz ADCCLK)(1) (2)
ADC OPERATING MODE CONDITIONS VDDA18 VDDA3.3 UNIT
Mode A (Operational Mode): 30 2 mA
BG and REF enabled
PWD disabled
Mode B: 9 0.5 mA
ADC clock enabled
BG and REF enabled
PWD enabled
Mode C: 5 20 μA
ADC clock enabled
BG and REF disabled
PWD enabled
Mode D: 5 15 μA
ADC clock disabled
BG and REF disabled
PWD enabled
(1) Test Conditions:
SYSCLKOUT = 100 MHz
ADC module clock = 12.5 MHz
ADC performing a continuous conversion of all 16 channels in Mode A
(2) VDDA18 includes current into VDD1A18 and VDD2A18. VDDA3.3 includes current into VDDA2 and VDDAIO.
126 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
ac
RsADCIN0
Cp
10 pF
Ron
1 k
1.64 pF
Ch
Switch
Typical Values of the Input Circuit Components:
Switch Resistance (Ron): 1 k
Sampling Capacitor (Ch): 1.64 pF
Parasitic Capacitance (Cp): 10 pF
Source Resistance (Rs): 50
28x DSP
Source
Signal
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Figure 6-25. ADC Analog Input Impedance Model
6.10.7.2 Definitions
Reference Voltage
The on-chip ADC has a built-in reference, which provides the reference voltages for the ADC.
Analog Inputs
The on-chip ADC consists of 16 analog inputs, which are sampled either one at a time or two channels at
a time. These inputs are software-selectable.
Converter
The on-chip ADC uses a 12-bit four-stage pipeline architecture, which achieves a high sample rate with
low power consumption.
Conversion Modes
The conversion can be performed in two different conversion modes:
Sequential sampling mode (SMODE = 0)
Simultaneous sampling mode (SMODE = 1)
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 127
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Analog Input on
Channel Ax or Bx
ADC Clock
Sample and Hold
SH Pulse
SMODE Bit
tdschx_n
tdschx_n+1
Sample n
Sample n+1Sample n+2
tSH
ADC Event Trigger from
ePWM or Other Sources
td(SH)
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.10.7.3 Sequential Sampling Mode (Single-Channel) (SMODE = 0)
In sequential sampling mode, the ADC can continuously convert input signals on any of the channels (Ax
to Bx). The ADC can start conversions on event triggers from the ePWM, software trigger, or from an
external ADCSOC signal. If the SMODE bit is 0, the ADC will do conversions on the selected channel on
every Sample/Hold pulse. The conversion time and latency of the Result register update are explained
below. The ADC interrupt flags are set a few SYSCLKOUT cycles after the Result register update. The
selected channels will be sampled at every falling edge of the Sample/Hold pulse. The Sample/Hold pulse
width can be programmed to be 1 ADC clock wide (minimum) or 16 ADC clocks wide (maximum).
Figure 6-26. Sequential Sampling Mode (Single-Channel) Timing
Table 6-41. Sequential Sampling Mode Timing
AT 12.5 MHz
SAMPLE n SAMPLE n + 1 ADC CLOCK, REMARKS
tc(ADCCLK) = 80 ns
td(SH) Delay time from event trigger to 2.5tc(ADCCLK)
sampling
tSH Sample/Hold width/Acquisition (1 + Acqps) * 80 ns with Acqps value = 0–15
Width tc(ADCCLK) Acqps = 0 ADCTRL1[8:11]
td(schx_n) Delay time for first result to appear 4tc(ADCCLK) 320 ns
in Result register
td(schx_n+1) Delay time for successive results to (2 + Acqps) * 160 ns
appear in Result register tc(ADCCLK)
128 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
Analog Input on
Channel Ax
Analog Input on
Channel Bx
ADC Clock
Sample and Hold
SH Pulse
tSH
tdschA0_n
tdschB0_n
tdschB0_n+1
Sample n Sample n+1 Sample n+2
tdschA0_n+1
td(SH)
ADC Event Trigger from
ePWM or Other Sources
SMODE Bit
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.10.7.4 Simultaneous Sampling Mode (Dual-Channel) (SMODE = 1)
In simultaneous mode, the ADC can continuously convert input signals on any one pair of channels
(A0/B0 to A7/B7). The ADC can start conversions on event triggers from the ePWM, software trigger, or
from an external ADCSOC signal. If the SMODE bit is 1, the ADC will do conversions on two selected
channels on every Sample/Hold pulse. The conversion time and latency of the result register update are
explained below. The ADC interrupt flags are set a few SYSCLKOUT cycles after the Result register
update. The selected channels will be sampled simultaneously at the falling edge of the Sample/Hold
pulse. The Sample/Hold pulse width can be programmed to be 1 ADC clock wide (minimum) or 16 ADC
clocks wide (maximum).
NOTE
In simultaneous mode, the ADCIN channel pair select has to be A0/B0, A1/B1, ..., A7/B7,
and not in other combinations (such as A1/B3, and so forth).
Figure 6-27. Simultaneous Sampling Mode Timing
Table 6-42. Simultaneous Sampling Mode Timing
AT 12.5 MHz
SAMPLE n SAMPLE n + 1 ADC CLOCK, REMARKS
tc(ADCCLK) = 80 ns
td(SH) Delay time from event trigger to 2.5tc(ADCCLK)
sampling
tSH Sample/Hold width/Acquisition (1 + Acqps) * 80 ns with Acqps value = 0–15
Width tc(ADCCLK) Acqps = 0 ADCTRL1[8:11]
td(schA0_n) Delay time for first result to 4tc(ADCCLK) 320 ns
appear in Result register
td(schB0_n ) Delay time for first result to 5tc(ADCCLK) 400 ns
appear in Result register
td(schA0_n+1) Delay time for successive results (3 + Acqps) * tc(ADCCLK) 240 ns
to appear in Result register
td(schB0_n+1 ) Delay time for successive results (3 + Acqps) * tc(ADCCLK) 240 ns
to appear in Result register
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 129
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
N+(SINAD *1.76)
6.02
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
6.11 Detailed Descriptions
Integral Nonlinearity
Integral nonlinearity refers to the deviation of each individual code from a line drawn from zero through full
scale. The point used as zero occurs one-half LSB before the first code transition. The full-scale point is
defined as level one-half LSB beyond the last code transition. The deviation is measured from the center
of each particular code to the true straight line between these two points.
Differential Nonlinearity
An ideal ADC exhibits code transitions that are exactly 1 LSB apart. DNL is the deviation from this ideal
value. A differential nonlinearity error of less than ±1 LSB ensures no missing codes.
Zero Offset
The major carry transition should occur when the analog input is at zero volts. Zero error is defined as the
deviation of the actual transition from that point.
Gain Error
The first code transition should occur at an analog value one-half LSB above negative full scale. The last
transition should occur at an analog value one and one-half LSB below the nominal full scale. Gain error is
the deviation of the actual difference between first and last code transitions and the ideal difference
between first and last code transitions.
Signal-to-Noise Ratio + Distortion (SINAD)
SINAD is the ratio of the rms value of the measured input signal to the rms sum of all other spectral
components below the Nyquist frequency, including harmonics but excluding dc. The value for SINAD is
expressed in decibels.
Effective Number of Bits (ENOB)
For a sine wave, SINAD can be expressed in terms of the number of bits. Using the following formula,
it is possible to get a measure of performance expressed as N, the effective number
of bits. Thus, effective number of bits for a device for sine wave inputs at a given input frequency can be
calculated directly from its measured SINAD.
Total Harmonic Distortion (THD)
THD is the ratio of the rms sum of the first nine harmonic components to the rms value of the measured
input signal and is expressed as a percentage or in decibels.
Spurious Free Dynamic Range (SFDR)
SFDR is the difference in dB between the rms amplitude of the input signal and the peak spurious signal.
130 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.12 Flash Timing
Table 6-43. Flash Endurance for A and S Temperature Material(1)
ERASE/PROGRAM MIN TYP MAX UNIT
TEMPERATURE
NfFlash endurance for the array (write/erase cycles) 0°C to 85°C (ambient) 20000 50000 cycles
NOTP OTP endurance for the array (write cycles) 0°C to 85°C (ambient) 1 write
(1) Write/erase operations outside of the temperature ranges indicated are not specified and may affect the endurance numbers.
Table 6-44. Flash Endurance for Q Temperature Material(1)
ERASE/PROGRAM MIN TYP MAX UNIT
TEMPERATURE
NfFlash endurance for the array (write/erase cycles) –40°C to 125°C (ambient) 20000 50000 cycles
NOTP OTP endurance for the array (write cycles) –40°C to 125°C (ambient) 1 write
(1) Write/erase operations outside of the temperature ranges indicated are not specified and may affect the endurance numbers.
Table 6-45. Flash Parameters at 100-MHz SYSCLKOUT
PARAMETER(1) TEST CONDITIONS MIN TYP MAX UNIT
Program 16-Bit Word 50 μs
Time 16K Sector 500 ms
8K Sector 250 ms
4K Sector 125 ms
Erase 16K Sector 2 s
Time(2) 8K Sector 2 s
4K Sector 2 s
IDD3VFLP VDD3VFL current consumption during the Erase 75 mA
Erase/Program cycle Program 35 mA
IDDP VDD current consumption during 140 mA
Erase/Program cycle
IDDIOP VDDIO current consumption during 20 mA
Erase/Program cycle
(1) Typical parameters as seen at room temperature including function call overhead, with all peripherals off.
(2) The on-chip flash memory is in an erased state when the device is shipped from TI. As such, erasing the flash memory is not required
prior to programming, when programming the device for the first time. However, the erase operation is needed on all subsequent
programming operations.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 131
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
(round up to the next highest integer) or 1, whichever is larger
+ƪǒta(OTP)
tc(SCO) Ǔ*1ƫ
OTP Wait-State
+ƪǒta(fp)
tc(SCO) Ǔ*1ƫ(round up to the next highest integer) or 0, whichever is larger
(round up to the next highest integer) or 1, whichever is larger
+ƪǒta(fr)
tc(SCO) Ǔ*1ƫ
Flash Page Wait-State
Flash Random Wait-State
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
Table 6-46. Flash/OTP Access Timing
PARAMETER MIN TYP MAX UNIT
ta(fp) Paged flash access time 36 ns
ta(fr) Random flash access time 36 ns
ta(OTP) OTP access time 60 ns
Equations to compute the Flash page wait-state and random wait-state in Table 6-47 are as follows:
Equation to compute the OTP wait-state in Table 6-47 is as follows:
Table 6-47. Minimum Required Flash/OTP Wait-States at Different Frequencies
SYSCLKOUT FLASH PAGE FLASH RANDOM
SYSCLKOUT (ns) OTP WAIT-STATE
(MHz) WAIT-STATE WAIT-STATE(1)
100 10 3 3 5
75 13.33 2 2 4
60 16.67 2 2 3
50 20 1 1 2
30 33.33 1 1 1
25 40 0 1 1
15 66.67 0 1 1
4 250 0 1 1
(1) Random wait-state must be greater than or equal to 1.
132 Electrical Specifications Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
+ƪǒta(rp)
tc(SCO) Ǔ*1ƫ(round up to the next highest integer) or 0, whichever is larger
+ƪǒta(rr)
tc(SCO) Ǔ*1ƫ(round up to the next highest integer) or 1, whichever is larger
ROM Page Wait-State
ROM Random Wait-State
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
6.13 ROM Timing (C280x only)
Table 6-48. ROM/OTP Access Timing
PARAMETER MIN TYP MAX UNIT
ta(rp) Paged ROM access time 19 ns
ta(rr) Random ROM access time 19 ns
ta(ROM) ROM (OTP area) access time (1) 60 ns
(1) In C280x devices, a 1K X 16 ROM block replaces the OTP block found in Flash devices.
Equations to compute the page wait-state and random wait-state in Table 6-49 are as follows:
Table 6-49. ROM/ROM (OTP area) Minimum Required
Wait-States at Different Frequencies
SYSCLKOUT SYSCLKOUT PAGE WAIT- RANDOM WAIT-
(MHz) (ns) STATE STATE(1)
100 10 1 1
75 13.33 1 1
50 20 0 1
30 33.33 0 1
25 40 0 1
15 66.67 0 1
4 250 0 1
(1) Random wait-state must be greater than or equal to 1.
Copyright © 2003–2012, Texas Instruments Incorporated Electrical Specifications 133
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
7 Migrating From F280x Devices to C280x Devices
7.1 Migration Issues
The migration issues to be considered while migrating from the F280x devices to C280x devices are as
follows:
The 1K OTP memory available in F280x devices has been replaced by 1K ROM C280x devices.
Current consumption differs for F280x and C280x devices for all four possible modes. See the
appropriate electrical section for exact numbers.
The VDD3VFL pin is the 3.3-V Flash core power pin in F280x devices but is a VDDIO pin in C280x
devices.
F280x and C280x devices are pin-compatible and code-compatible; however, they are electrically
different with different EMI/ESD profiles. Before ramping production with C280x devices, evaluate
performance of the hardware design with both devices.
Addresses 0x3D 7BFC through 0x3D 7BFF in the OTP and addresses 0x3F 7FF0 through 0x3F 7FF5
in the main ROM array are reserved for ROM part-specific information and are not available for user
applications.
The paged and random wait-state specifications for the Flash and ROM parts are different. While
migrating from Flash to ROM parts, the same wait-state values must be used for best-performance
compatibility (for example, in applications that use software delay loops or where precise interrupt
latencies are critical).
The analog input switch resistance is smaller in C280x devices compared to F280x devices. While
migrating from a Flash to a ROM device care should be taken to design the analog input circuits to
meet the application performance required by the sampling network.
The PART-ID register value is different for Flash and ROM parts.
From a silicon functionality/errata standpoint, rev A ROM devices are equivalent to rev C flash devices.
See the errata applicable to 280x devices for details.
As part of the ROM code generation process, all unused memory locations in the customer application
are automatically filled with 0xFFFF. Unused locations should not be manually filled with any other
data.
For errata applicable to 280x devices, see the TMS320F280x, TMS320C280x, and TMS320F2801x DSC
Silicon Errata (literature number SPRZ171).
134 Migrating From F280x Devices to C280x Devices Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
8 Revision History
This data sheet revision history highlights the technical changes made to the SPRS230M device-specific
data sheet to make it an SPRS230N revision.
Scope: See table below.
LOCATION ADDITIONS, DELETIONS, AND MODIFICATIONS
Section 1.1 Features:
Added "Endianness: Little Endian" feature
Section 5.2 Documentation Support:
Added TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320C2802,
TMS320C2801, TMS320F28016, TMS320F28015 Digital Signal Processors Data Manual (literature
number SPRS230)
Added TMS320F280x, TMS320C280x, and TMS320F2801x DSC Silicon Errata (literature number SPRZ171)
Section 6.8 Power Sequencing:
Changed "Additionally it is recommended that no voltage larger than a diode drop (0.7 V) should be applied to
any pin prior to powering up the device" to "No voltage larger than a diode drop (0.7 V) above VDDIO should
be applied to any digital pin (for analog pins, it is 0.7 V above VDDA) prior to powering up the device.
Furthermore, VDDIO and VDDA should always be within 0.3 V of each other"
Table 6-28 Enhanced Quadrature Encoder Pulse (eQEP) Timing Requirements:
Added footnote about limitations in the asynchronous mode
Table 6-45 Flash Parameters at 100-MHz SYSCLKOUT:
Added footnote about flash memory being in an erased state when the device is shipped
Copyright © 2003–2012, Texas Instruments Incorporated Revision History 135
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N OCTOBER 2003REVISED MAY 2012
www.ti.com
9 Mechanical Data
Table 9-1 through Table 9-6 show the thermal data.
The mechanical package diagram(s) that follow the table(s) reflect the most current released mechanical
data available for the designated device(s).
Table 9-1. F280x Thermal Model 100-pin GGM Results
AIR FLOW
PARAMETER 0 lfm 150 lfm 250 lfm 500 lfm
θJA[°C/W] High k PCB 30.58 29.31 28.09 26.62
ΨJT[°C/W] 0.4184 0.32 0.3725 0.4887
θJC 12.08
θJB 16.46
Table 9-2. F280x Thermal Model 100-pin PZ Results
AIR FLOW
PARAMETER 0 lfm 150 lfm 250 lfm 500 lfm
θJA[°C/W] High k PCB 48.16 40.06 37.96 35.17
ΨJT[°C/W] 0.3425 0.85 1.0575 1.410
θJC 12.89
θJB 29.58
Table 9-3. C280x Thermal Model 100-pin GGM Results
AIR FLOW
PARAMETER 0 lfm 150 lfm 250 lfm 500 lfm
θJA[°C/W] High k PCB 36.33 35.01 33.81 32.31
ΨJT[°C/W] 0.57 0.43 0.52 0.67
θJC 14.18
θJB 21.36
Table 9-4. C280x Thermal Model 100-pin PZ Results
AIR FLOW
PARAMETER 0 lfm 150 lfm 250 lfm 500 lfm
θJA[°C/W] High k PCB 69.81 60.34 57.46 53.63
ΨJT[°C/W] 0.42 1.23 1.54 2.11
θJC 13.52
θJB 54.78
Table 9-5. F2809 Thermal Model 100-pin GGM Results
AIR FLOW
PARAMETER 0 lfm 150 lfm 250 lfm 500 lfm
θJA[°C/W] High k PCB 28.15 26.89 25.68 24.22
ΨJT[°C/W] 0.38 0.35 0.33 0.44
θJC 10.36
θJB 13.3
136 Mechanical Data Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230N OCTOBER 2003REVISED MAY 2012
Table 9-6. F2809 Thermal Model 100-pin PZ Results
AIR FLOW
PARAMETER 0 lfm 150 lfm 250 lfm 500 lfm
θJA[°C/W] High k PCB 44.02 28.34 36.28 33.68
ΨJT[°C/W] 0.2 0.56 0.7 0.95
θJC 7.06
θJB 28.76
Copyright © 2003–2012, Texas Instruments Incorporated Mechanical Data 137
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015
PACKAGE OPTION ADDENDUM
www.ti.com 30-Oct-2013
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
TMS320C2801GGMA ACTIVE BGA
MICROSTAR GGM 100 TBD Call TI Call TI -40 to 85
TMS320C2801GGMS ACTIVE BGA
MICROSTAR GGM 100 TBD Call TI Call TI -40 to 125
TMS320C2801PZA ACTIVE LQFP PZ 100 TBD Call TI Call TI -40 to 85
TMS320C2801PZQ ACTIVE LQFP PZ 100 TBD Call TI Call TI -40 to 125
TMS320C2801PZS ACTIVE LQFP PZ 100 TBD Call TI Call TI -40 to 125
TMS320C2801ZGMA ACTIVE BGA
MICROSTAR ZGM 100 TBD Call TI Call TI -40 to 85
TMS320C2801ZGMS ACTIVE BGA
MICROSTAR ZGM 100 TBD Call TI Call TI -40 to 125
TMS320C2802GGMA ACTIVE BGA
MICROSTAR GGM 100 TBD Call TI Call TI -40 to 85
TMS320C2802GGMS ACTIVE BGA
MICROSTAR GGM 100 TBD Call TI Call TI -40 to 125
TMS320C2802PZA ACTIVE LQFP PZ 100 TBD Call TI Call TI -40 to 85
TMS320C2802PZQ ACTIVE LQFP PZ 100 TBD Call TI Call TI -40 to 125
TMS320C2802PZS ACTIVE LQFP PZ 100 TBD Call TI Call TI -40 to 125
TMS320C2802ZGMA ACTIVE BGA
MICROSTAR ZGM 100 TBD Call TI Call TI -40 to 85
TMS320C2802ZGMS ACTIVE BGA
MICROSTAR ZGM 100 TBD Call TI Call TI -40 to 85
TMS320F28015PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F28015PZA
TMS
TMS320F28015PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F28015PZQ
TMS
TMS320F28015PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F28015PZS
TMS
TMS320F28015ZGMA ACTIVE BGA
MICROSTAR ZGM 100 184 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 85 F28015ZGMA
TMS320
PACKAGE OPTION ADDENDUM
www.ti.com 30-Oct-2013
Addendum-Page 2
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
TMS320F28016PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F28016PZA
TMS
TMS320F28016PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F28016PZQ
TMS
TMS320F28016PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F28016PZS
TMS
TMS320F2801GGMA ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 85 F2801GGMA
TMS320
TMS320F2801GGMS ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 125 F2801GGMS
TMS320
TMS320F2801PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2801PZA
TMS
TMS320F2801PZA-60 ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2801PZA-60
TMS
TMS320F2801PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2801PZQ
TMS
TMS320F2801PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2801PZS
TMS
TMS320F2801PZS-60 ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2801PZS-60
TMS
TMS320F2801ZGMA ACTIVE BGA
MICROSTAR ZGM 100 168 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 85 F2801ZGMA
TMS320
TMS320F2801ZGMS ACTIVE BGA
MICROSTAR ZGM 100 184 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 125 F2801ZGMS
TMS320
TMS320F2802GGMA ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 85 F2802GGMA
TMS320
TMS320F2802GGMS ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 125 F2802GGMS
TMS320
TMS320F2802PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2802PZA
TMS
TMS320F2802PZA-60 ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2802PZA-60
TMS
TMS320F2802PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2802PZQ
TMS
TMS320F2802PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2802PZS
TMS
PACKAGE OPTION ADDENDUM
www.ti.com 30-Oct-2013
Addendum-Page 3
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
TMS320F2802PZS-60 ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2802PZS-60
TMS
TMS320F2802ZGMA ACTIVE BGA
MICROSTAR ZGM 100 168 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 85 F2802ZGMA
TMS320
TMS320F2802ZGMS ACTIVE BGA
MICROSTAR ZGM 100 184 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 125 F2802ZGMS
TMS320
TMS320F2806GGMA ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 85 F2806GGMA
TMS320
TMS320F2806GGMS ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 125 F2806GGMS
TMS320
TMS320F2806PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2806PZA
TMS
TMS320F2806PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2806PZQ
TMS
TMS320F2806PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2806PZS
TMS
TMS320F2806ZGMA ACTIVE BGA
MICROSTAR ZGM 100 168 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 85 F2806ZGMA
TMS320
TMS320F2806ZGMS ACTIVE BGA
MICROSTAR ZGM 100 184 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 125 F2806ZGMS
TMS320
TMS320F2808GGMA ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 85 F2808GGMA
TMS320
TMS320F2808GGMS ACTIVE BGA
MICROSTAR GGM 100 168 TBD SNPB Level-3-220C-168 HR -40 to 125 F2808GGMS
TMS320
TMS320F2808PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2808PZA
TMS
TMS320F2808PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2808PZQ
TMS
TMS320F2808PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2808PZS
TMS
TMS320F2808ZGMA ACTIVE BGA
MICROSTAR ZGM 100 168 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 85 F2808ZGMA
TMS320
TMS320F2808ZGMS ACTIVE BGA
MICROSTAR ZGM 100 168 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 125 F2808ZGMS
TMS320
TMS320F2809GGMA ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 85 F2809GGMA
TMS320
PACKAGE OPTION ADDENDUM
www.ti.com 30-Oct-2013
Addendum-Page 4
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
TMS320F2809GGMS ACTIVE BGA
MICROSTAR GGM 100 184 TBD SNPB Level-3-220C-168 HR -40 to 125 F2809GGMS
TMS320
TMS320F2809PZA ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 320F2809PZA
TMS
TMS320F2809PZQ ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2809PZQ
TMS
TMS320F2809PZS ACTIVE LQFP PZ 100 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 320F2809PZS
TMS
TMS320F2809ZGMA ACTIVE BGA
MICROSTAR ZGM 100 184 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 85 F2809ZGMA
TMS320
TMS320F2809ZGMS ACTIVE BGA
MICROSTAR ZGM 100 184 Green (RoHS
& no Sb/Br) SNAGCU Level-3-260C-168 HR -40 to 125 F2809ZGMS
TMS320
TMX320F2809GGMA OBSOLETE BGA
MICROSTAR GGM 100 TBD Call TI Call TI -40 to 85
TMX320F2809PZA OBSOLETE LQFP PZ 100 TBD Call TI Call TI -40 to 85
TMX320F2809PZPA OBSOLETE HTQFP PZP 100 TBD Call TI Call TI -40 to 85
TMX320F2809ZGMA OBSOLETE BGA
MICROSTAR ZGM 100 TBD Call TI Call TI -40 to 85
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
PACKAGE OPTION ADDENDUM
www.ti.com 30-Oct-2013
Addendum-Page 5
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
MECHANICAL DATA
MPBG028B FEBRUAR Y 1997 – REVISED MAY 2002
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
GGM (S–PBGA–N100) PLASTIC BALL GRID ARRAY
0,08 0,10
1,40 MAX
0,85
0,55
0,45 0,45
0,35
0,95
4
C
B
A
D
E
213
K
F
G
H
J
576 9810
Seating Plane
SQ
9,90
10,10 7,20 TYP
0,40
0,40
A1 Corner
Bottom View
4145257–3/C 12/01
0,80
0,80
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice
C. MicroStar BGA configuration.
MECHANICAL DATA
MTQF013AOCTOBER 1994 – REVISED DECEMBER 1996
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PZ (S-PQFP-G100) PLASTIC QUAD FLATPACK
4040149/B 11/96
50
26 0,13 NOM
Gage Plane
0,25
0,45
0,75
0,05 MIN
0,27
51
25
75
1
12,00 TYP
0,17
76
100
SQ
SQ
15,80
16,20
13,80
1,35
1,45
1,60 MAX
14,20
0°–7°
Seating Plane
0,08
0,50 M
0,08
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-026
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated