CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PSA Super low ESR, high temperature resistance Large capacitance & Improved high ripple current capability Rated voltage range : 2.5 to 35Vdc Endurance : 2,000 hours at 105 Suitable for DC-DC converters, voltage regulators and decoupling applications For computer motherboards RoHS Compliant Lower ESR PS SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105 Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note 2.5 to 35Vdc 20% (M) Rated voltagex1.15 I=0.2CV (Rated voltage 2.5 to 25Vdc) / I=0.5CV (Rated voltage 35Vdc) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) Dissipation Factor (tan) 0.12 max. Low Temperature Characteristics (Max. Impedance Ratio) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value 150% of the initial specified value D.F. (tan) ESR 150% of the initial specified value The initial specified value Leakage current The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60,, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value The initial specified value Leakage current The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor (R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value The initial specified value Leakage current 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. MARKING DIMENSIONS [mm] Code : E F 0.5 EX) 4V820F D' Coated Case 0.6 Terminal L' 15min. 4min. Size code D d F D' L' HB5 8 JC5 10 PS18M 820 4V 0.6 3.5 5.0 D+0.5max L+1.5max. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001L CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS- AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270F:271, 1 500F:152) Lead forming*Taping code Terminal code Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV(Vdc) 2.5 4 6.3 10 16 20 25 35 Cap(F) 680 820 1,500 560 820 1,000 1,200 390 470 680 820 1,000 270 330 470 560 100 180 270 330 100 150 68 100 18 33 Case size DxL(mm) 8x11.5 8x11.5 10x12.5 8x11.5 10x12.5 10x12.5 10x12.5 8x11.5 8x11.5 10x12.5 10x12.5 10x12.5 8x11.5 8x11.5 10x12.5 10x12.5 8x11.5 8x11.5 10x12.5 10x12.5 8x11.5 10x12.5 8x11.5 10x12.5 8x11.5 10x12.5 ESR (mmax/20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) 5,230 5,230 5,500 5,230 5,500 5,500 5,500 4,770 4,770 5,500 5,500 5,500 4,420 4,420 5,300 5,300 4,360 4,360 5,050 5,050 3,320 4,320 3,320 4,320 2,830 3,270 10 10 8 10 8 8 8 12 12 10 10 10 14 14 12 12 16 16 14 14 24 20 24 20 34 30 Part No. APS-2R5E681MHB5S APS-2R5E821MHB5S APS-2R5E152MJC5S APS-4R0E561MHB5S APS-4R0E821MJC5S APS-4R0E102MJC5S APS-4R0E122MJC5S APS-6R3E391MHB5S APS-6R3E471MHB5S APS-6R3E681MJC5S APS-6R3E821MJC5S APS-6R3E102MJC5S APS-100E271MHB5S APS-100E331MHB5S APS-100E471MJC5S APS-100E561MJC5S APS-160E101MHB5S APS-160E181MHB5S APS-160E271MJC5S APS-160E331MJC5S APS-200E101MHB5S APS-200E151MJC5S APS-250E680MHB5S APS-250E101MJC5S APS-350E180MHB5S APS-350E330MJC5S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001L