Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
For computer motherboards
(at 100kHz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
*Note
Dissipation Factor
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Bias Humidity Test
Surge Voltage Test
Failure Rate
Items
-
55 to +105℃
2.5 to 35Vdc
I=0.2CV (Rated voltage 2.5 to 25Vdc) / I=0.5CV (Rated voltage 35Vdc)
0.12 max.
Appearance No significant damage
Capacitance change
ESR
Leakage current
,
90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change
ESR
Leakage current
Appearance No significant damage
Capacitance change
ESR
Leakage current
Characteristics
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Size code
HB5
8
3.5
JC5
10
5.0
0.6
L+1.5max.
Coated Case
L'
15min. 4min.
φD'
φ0.6
PS
18M
820
4V
Lower ESR
PS
PSA
●Super low ESR, high temperature resistance
●Rated voltage range : 2.5 to 35Vdc
●Endurance : 2,000 hours at 105
℃
●Large capacitance & Improved high ripple current capability
●Suitable for DC-DC converters, voltage regulators and decoupling applications
●RoHS Compliant
◆SPECIFICATIONS
20% (M)
Rated voltage×1.15
(at 20℃, 120Hz)
(at 20℃, 120Hz)
(at 105℃)
(at 20℃ after 2 minutes)
(tanδ)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (Vdc)
Z(
-
25℃)/Z(+20℃)≦1.15
Z(
-
55℃)/Z(+20℃)≦1.25
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
at 105℃.
D.F. (tanδ)
D.F. (tanδ)
D.F. (tanδ)
≦20% of the initial value
≦20% of the initial value
≦20% of the initial value
≦150% of the initial specified value
≦150% of the initial specified value
≦150% of the initial specified value
≦150% of the initial specified value
≦150% of the initial specified value
≦150% of the initial specified value
≦The initial specified value
≦The initial specified value
≦The initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resistor (R=1kΩ) and discharge for 5 minutes 30 seconds.
0.5% per 1,000 hours maximum (Confidence level 60% at 105℃)
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
◆DIMENSIONS [mm]
●Terminal Code : E
F
0.5
F
L'
φD
φd
φD' φD+0.5max
◆MARKING
EX) 4V820μF
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃,
Radial Lead
CAT. No. E1001L(1/2)
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Supplement code
Size code
Capacitance tolerance code
Lead forming·Taping code
Terminal code
Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100)
Series code
Category
A P S
-
A A A EA A A A A A A A SM
1342 6 7 8 9 10 1312518171611 1514
Please refer to "Product code guide (conductive polymer type)"
Case size ESR Rated ripple current Part No.
2.5
680
820
1,500
4
560
820
1,000
1,200
6.3
390
470
680
820
1,000
10
270
330
470
560
16
100
180
270
330
20 100
150
25 68
100
35 18
33
◆PART NUMBERING SYSTEM
Capacitance code (ex. 270µF:271, 1 500µF:152)
◆STANDARD RATINGS
□□ : Enter the appropriate lead forming or taping code.
φD×L(mm) (mΩ max/20℃, 100k to 300kHz) (mArms/105℃, 100kHz)
WV(Vdc)
8×11.5
8×11.5
10×12.5
8×11.5
10×12.5
10×12.5
10×12.5
8×11.5
8×11.5
10×12.5
10×12.5
10×12.5
8×11.5
8×11.5
10×12.5
10×12.5
8×11.5
8×11.5
10×12.5
10×12.5
8×11.5
10×12.5
8×11.5
10×12.5
8×11.5
10×12.5
Cap(µF)
10
10
8
10
8
8
8
12
12
10
10
10
14
14
12
12
16
16
14
14
24
20
24
20
34
30
5,230
5,230
5,500
5,230
5,500
5,500
5,500
4,770
4,770
5,500
5,500
5,500
4,420
4,420
5,300
5,300
4,360
4,360
5,050
5,050
3,320
4,320
3,320
4,320
2,830
3,270
APS-2R5E□□681MHB5S
APS-2R5E□□821MHB5S
APS-2R5E□□152MJC5S
APS-4R0E□□561MHB5S
APS-4R0E□□821MJC5S
APS-4R0E□□102MJC5S
APS-4R0E□□122MJC5S
APS-6R3E□□391MHB5S
APS-6R3E□□471MHB5S
APS-6R3E□□681MJC5S
APS-6R3E□□821MJC5S
APS-6R3E□□102MJC5S
APS-100E□□271MHB5S
APS-100E□□331MHB5S
APS-100E□□471MJC5S
APS-100E□□561MJC5S
APS-160E□□101MHB5S
APS-160E□□181MHB5S
APS-160E□□271MJC5S
APS-160E□□331MJC5S
APS-200E□□101MHB5S
APS-200E□□151MJC5S
APS-250E□□680MHB5S
APS-250E□□101MJC5S
APS-350E□□180MHB5S
APS-350E□□330MJC5S
Radial Lead
CAT. No. E1001L(2/2)
