Peaking Coils ctparts.com CT262LY Series From 0.10 mH to 15 mH ENGINEERING KIT #4 PAGE 90 Not shown at actual size. SPECIFICATIONS Please specify tolerance code when ordering. CT262LY-101_ J = 5%, K = 10% Inductance (mH) L Test Freq. (kHz) Q Fact. Min. Q Test Freq. (kHz) SRF Min. (MHz) DCR Max. ) ( Rated DC (mA) CT262LY-101_ CT262LY-121_ CT262LY-151_ CT262LY-181_ CT262LY-221_ CT262LY-271_ CT262LY-331_ CT262LY-391_ CT262LY-471_ CT262LY-561_ CT262LY-681_ CT262LY-821_ .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 796 796 796 796 796 796 796 796 796 796 796 796 60 60 60 60 60 60 60 60 60 60 60 60 796 796 796 796 796 796 796 796 796 796 796 796 6.1 5.5 5.0 4.7 4.5 4.1 3.8 3.5 3.2 2.9 2.7 2.3 2.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 5.0 6.0 6.0 7.0 200 200 200 200 150 150 150 100 100 100 100 50 CT262LY-102_ CT262LY-122_ CT262LY-152_ CT262LY-182_ CT262LY-222_ CT262LY-272_ CT262LY-332_ CT262LY-392_ CT262LY-472_ CT262LY-562_ CT262LY-682_ CT262LY-822_ 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 252 252 252 252 252 252 252 252 252 252 252 252 80 80 80 80 80 80 80 80 80 80 80 80 252 252 252 252 252 252 252 252 252 252 252 252 2.1 1.9 1.8 1.6 1.5 1.4 .90 .90 .80 .70 .70 .60 9.0 9.0 11 12 14 15 25 30 32 36 40 45 50 50 50 50 50 50 40 40 40 30 30 30 CT262LY-103_ CT262LY-123_ CT262LY-153_ 10.0 12.0 15.0 79.6 79.6 79.6 60 60 60 79.6 79.6 79.6 .60 .50 .50 55 65 80 20 20 20 Part Number CHARACTERISTICS PHYSICAL DIMENSIONS Size mm inches A Max. B Max. C Nom. D 22 AWG Nom. 6.2 8 5 5 0.643 0.24 0.32 0.2 0.2 0.03 Volume Manufacturer of Inductive Components 800-684-5322 Inside US 949-453-1811 Outside US 7.12.14.01 Copyright (c) 2002 by CT Magnetics. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice. 83 CENTRAL Technologies Description: Radial leaded (low profile) fixed inductor Applications: Ideal as a choke coil and a trap coil for low profile equipment. Winding core is encapsulated in heat shrink plastic housing providing mechanical and environmental protection Temperature Coefficient: 440ppm / C max. Inductance Tolerance: 5%, 10% Testing: Inductance and Q are tested on an HP4285A at specified frequency Packaging: Bulk pack; packaged in styrofoam Marking: Sleeving marked with inductance code Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information.