UNISONIC TECHNOLOGIES CO., LTD
TIP36C
PNP SILICON TRANSISTOR
www.unisonic.com.tw
1 of 2
Copyright © 2005 Unisonic Technologies Co., Ltd
QW-R214-014,A
HIGH POWER TRANSISTORS
DESCRIPTION
The UTC TIP36C is a PNP Expitaxial-Base transistor,
designed for using in general purpose amplifier and switching
applications. Complement to TIP35C
INTERNAL SCHEMATIC DIAGRAM
(1)
B
(2)C
E(3)
TO-3P
*Pb-free plating product number: TIP36CL
ORDERING INFORMATION
Order Number Pin Assignment
Normal Lead Free Plating Package 1 2 3 Packing
TIP36C-T3P-K TIP36C-T3P-K
TO-3P B C E Bulk
TIP36CL-T3P-K
(1)Packing Type
(2)Package Type
(1) K: Bulk
(2) T3P: TO-3P
(3)Lead Plating (3) L: Lead Free Plating, Blank: Pb/Sn
TIP36C
PNP SILICON TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD
2 of 2
www.unisonic.com.tw
QW-R214-014,A
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL RATINGS UNIT
Collector-Base Voltage (I
E
= 0) V
CBO
-100 V
Collector-Emitter Voltage (I
B
= 0) V
CEO
-100 V
Emitter-Base Voltage (I
C
= 0) V
EBO
-5 V
Collector Current I
C
-25 A
Collector Peak Current I
CM
-50 A
Base Current I
B
-5 A
Total Dissipation (Tc =25
) P
D
125 W
Junction Temperature T
J
+150
Storage Temperature T
STG
-65 ~ +150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER SYMBOL MIN TYP MAX UNIT
Thermal Resistance Junction-Case θ
JC
1
/ W
ELECTRICAL CHARACTERISTICS
(Tc =25
, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Collector Cut-off Current (I
B
= 0) I
CEO
V
CE
= -60 V -1 mA
Emitter Cut-off Current (I
C
= 0) I
EBO
V
EB
= -5 V -1 mA
Collector Cut-off Current (V
BE
= 0) I
CES
V
CE
= Rated V
CEO
-0.7 mA
Collector-Emitter Sustaining Voltage (I
B
= 0) V
CEO(SUS)
*I
C
= -30 mA -100 V
I
B
= -1.5 A, I
C
= -15 A -1.8 V
Collector-Emitter Saturation Voltage V
CE(SAT)
*I
B
= -5 A, I
C
= -25 A -4 V
V
CE
=-4 V, I
C
= -15 A -2 V
Base-Emitter Voltage V
BE(ON)
*V
CE
= -4 V, I
C
= -25 A -4 V
V
CE
= -4 V, I
C
= -1.5 A 25 50
DC Current Gain h
FE
* V
CE
= -4 V, I
C
= -15 A 10
Transition Frequency f
T
V
CE
= -10 V, I
C
= -1 A, f = 1 MHz 3 MHz
Small Signal Current Gain h
fe
V
CE
= -10 V,
I
C
= -1 A,
f = 1 KHz 25
* Pulsed: Pulse Duration = 300 µs, Duty Cycle
2 %
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.