RH, NH
www.vishay.com Vishay Dale
Revision: 23-Nov-11 1Document Number: 30201
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wirewound Resistors, Industrial Power,
Aluminum Housed, Chassis Mount
FEATURES
•
Molded construction for total environmental
protection
• Complete welded construction
• Meets applicable requirements of
MIL-PRF-18546
• Available in non-inductive styles (type NH) with
Aryton-Perry winding for lowest reactive
components
• Mounts on chassis to utilize heat-sink effect
• Excellent stability in operation (< 1 % change in
resistance)
• MIL-PRF-18546 qualified, type RE resistors can
be found at: www.vishay.com/doc?30282
•
Compliant to RoHS Directive 2002/95/EC
Notes
*Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Note
• RH005 and NH005 printed with 5 W power rating. RH010 and NH010 printed with 10 W power rating. New construction allows these
resistors to be rated at higher wattage but will only be printed with the higher wattage upon customer request
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER
RATING
P25 °C W
RESISTANCE
RANGE
RESISTANCE
RANGE
RESISTANCE
RANGE
RESISTANCE
RANGE
WEIGHT
(typical)
g
± 0.05 %, ± 0.1 % ± 0.25 % ± 0.5 % ± 1 %, ± 3 %, ± 5 %
RH005 RH-5 7.5 0.5 to 6.75K 0.1 to 8.6K 0.05 to 8.6K 0.02 to 24.5K 3
NH005 NH-5 7.5 0.5 to 2.32K 0.1 to 3.27K 0.05 to 3.27K 0.05 to 12.75K 3.3
RH010 RH-10 12.5 0.5 to 12.7K 0.1 to 16.69K 0.05 to 16.69K 0.01 to 47.1K 6
NH010 NH-10 12.5 0.5 to 4.45K 0.1 to 5.54K 0.05 to 5.54K 0.05 to 23.5K 8.8
RH025 RH-25 25 0.5 to 25.7K 0.1 to 32.99K 0.05 to 32.99K 0.01 to 95.2K 13
NH025 NH-25 25 0.5 to 9.09K 0.1 to 12.8K 0.05 to 12.8K 0.05 to 47.6K 16.5
RH050 RH-50 50 0.5 to 73.4K 0.1 to 96K 0.05 to 96K 0.01 to 273K 28
NH050 NH-50 50 0.5 to 26K 0.1 to 36.7K 0.05 to 36.7K 0.05 to 136K 35
RH100 RH-100 100 0.5 to 90K 0.1 to 90K 0.05 to 90K 0.05 to 90K 350
NH100 NH-100 100 0.5 to 37.5K 0.1 to 37.5K 0.05 to 37.5K 0.05 to 37.5K 385
RH250 RH-250 250 0.5 to 116K 0.1 to 116K 0.05 to 116K 0.05 to 116K 630
NH250 NH-250 250 0.5 to 48.5K 0.1 to 48.5K 0.05 to 48.5K 0.05 to 48.5K 690
TECHNICAL SPECIFICATIONS
PARAMETER UNIT RH RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 20 for 10 and above; ± 50 for 1 to 9.9 , ± 100 for 0.1 to 0.99
Maximum Working Voltage V (P x R)1/2
Insulation Resistance 10 000 M minimum dry, 1000 M minimum after moisture test
Solderability - Meets requirements of ANSI J-STD-002
Operating Temperature Range °C - 55 to + 250
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: RH0054R125FC02
GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING SPECIAL
RH005
(See Standard
Electrical
Specifications
Global Model
column for
options)
R = Decimal
K = Thousand
15R00 = 15
10K00 = 10 k
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
H = 3.0 %
J = 5.0 %
E02 = Lead (Pb)-free, card pack (RH005 - RH050)
E01 = Lead (Pb)-free, skin pack (RH100 and RH250)
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
C02 = Tin/lead, card pack (RH005 - RH050)
J01 = Tin/lead, skin pack (RH100 and RH250)
Historical Part Numbering example: RH-5 4.125 1 % C02
RH-5 4.125 1 % C02
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING
RH0054R125FC02