DC/DC Converters THD 15 Series, 15 Watt RoHS compliant pending Features Smallest encapsulated 15W Converter Ultra compact Size: 25.4x25.4x10.2mm Single- and Dual Output Models I/O- Isolation Voltage 1500VDC High Efficiency up to 87% Operating Temp. Range: -25C to 71C Remote On/Off Industry Standard Pinout Lead free Design, RoHS compliant 3 Year Product Warranty The THD-15 series is the latest generation of high performance 15W dc-dc converter modules setting new standards concerning power density. This product comes in a encapsulated package with dimensions of only 25.4 x 25.4 x 10mm and therefore occupies 50%(!) less board space than existing 15W converters. All models have wide 2:1 input voltage range and precisely regulated, isolated output voltages. Built-in filters for both input and output minimizes the need for external filtering. Further features include remote On/Off and short circuit protection. Typical applications for these converters are battery operated equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space is limited on the PCB. Models Order code Output voltage Output current max. Efficiency typ. THD 15-2410 3.3 VDC 3`500 mA 84 % THD 15-2411 5.1 VDC 3`000 mA 85 % 12 VDC 1`250 mA 86 % 15 VDC 1'000 mA 86 % THD 15-2422 12 VDC 600 mA 85 % THD 10-2423 15 VDC 500 mA 85 % THD 15-4810 3.3 VDC 3`500 mA 84 % THD 15-2411 5.1 VDC 3`000 mA 86 % THD 15-4812 12 VDC 1`250 mA 87 % 15 VDC 1'000 mA 87 % THD 15-2422 12 VDC 600 mA 85 % THD 15-4823 15 VDC 500 mA 85 % THD 15-2412 THD 15-2413 THD 15-4813 http://www.tracopower.com Input voltage range 18 - 36 VDC 36 - 75 VDC Page 1 of 3 DC/DC Converters THD 15 Series 15 Watt Input Specifications Input current (no load) 24 Vin models: 50 mA typ.. 48 Vin models: 30 mA typ. Input current (full load) 24 Vin; 3.3 Vout 24 Vin; other output 48 Vin; 3.3 Vout 48 Vin; other output models: models: models: models: 570 mA typ. 730 mA typ. 280 mA typ. 360 mA typ. Start-up voltage / under voltage shut down 24 Vin models: 17 VDC /16.5 VDC 48 Vin models: 34.0 VDC /32.5 VDC Surge voltage (100 msec. max.) 24 Vin models: 50 V max.. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A (with external input capacitor, see Note 1) Output Specifications Voltage set accuracy Regulation 1% - Input variation Vin min. to Vin max - Load variation 10 - 100 % single output models: dual output models balanced: dual output models unbalanced: 0.5% max. 0.5 % max. 2.0 % max. 5.0 % max. Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk max. (with external output capacitor, see Note 1) Temperature coefficient 0.02 % /K Output current limitation >105% of Iout max., foldback Short circuit protection indefinite (automatic recovery) Start-up time 30ms max. Max. capacitive load 1200F General Specifications Temperature ranges - - - - Operating Derating Case temperature Storage -25 C ... +71C 2.5%/K above 50 +100 C max. -40 C ... +110 C Humidity (non condensing) 85 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 F) > 190'000h @ +25C Isolation voltage - Input/Output 1'500 VDC Isolation capacity - Input/Output 235 pF typ. Isolation resistance - Input/Output (500 VDC) >100 M Ohm Switching frequency (fixed) 330 kHz typ. (Pulse width modulation PWM) Safety standards UL 60950, EN 60950, IEC 60950 compliance up to 60 VDC input voltage (SELV limit) Safety approvals UL/cUL pending Remote On/Off - ON: - OFF: open circuit on pin RC short circuit between pin RC and pin -Vin All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters THD 15 Series 15 Watt Physical Specifications Case material plastic PBT (UL94V-0 rated) Baseplate non conductive FR4 Potting material silicon (UL94V-0 rated) Weight 12 g (0.41 oz) Soldering temperature max. 260 C / 10sec. Note 1 Recommended circuit to reduce conducted noise and output ripple & noise: +Vout C1 C1: 33F low ESR electrolytic capacitor C2 - Vin C3 Load +Vin C2: 10F low ESR electrolytic capacitor C3: 1 film capacitor -Vout For dual output models use capacitors for each output Outline Dimensions mm 4 *3.8 3 3.5 10 2.5 10.16 10.16 (0.14) (0.39) (0.1) (0.4) (0.4) 25.4 (1.0) 2.5 5 *(0.15) Bottom view (0.1) (0.8) 20.32 1 2 6 Pin-Out *(1.1) (0.2) (1.0) 5.08 (0.3) 25.4 *27.9 7.62 Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 +Vout +Vout 4 No pin Common 5 -Vout -Vout 6 Remote On/Off Remote On/Off *Dual Output Models () = Inch Pin diameter o 0.8 0.05 (0.02 0.002) Tolerances 0.35 (0.014) Specifications can be changed without notice Rev. 07/05 Page 3 of 3