2.0x1.25mm SMD CHIP LED LAMP Part Number: KPHCM-2012QBC-G Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0X1.25mm SMT LED,0.5mm max. thickness. The Blue source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ9113 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/20/2010 DRAWN: Y.H.Wu PAGE: 1 OF 5 ERP: 1203010145 Selection Guide Part No. Dice KPHCM-2012QBC-G Lens Type Blue (InGaN) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 100 160 110 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 461 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ9113 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/20/2010 DRAWN: Y.H.Wu PAGE: 2 OF 5 ERP: 1203010145 Blue KPHCM-2012QBC-G SPEC NO: DSAJ9113 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/20/2010 DRAWN: Y.H.Wu PAGE: 3 OF 5 ERP: 1203010145 KPHCM-2012QBC-G Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ9113 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/20/2010 DRAWN: Y.H.Wu PAGE: 4 OF 5 ERP: 1203010145 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ9113 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu KPHCM-2012QBC-G DATE: DEC/20/2010 DRAWN: Y.H.Wu PAGE: 5 OF 5 ERP: 1203010145