Input – Dedicated in-system programming enable input pin. This pin
is brought low to enable the programming mode. The MODE, SDI,
SDO and SCLK options become active.
Input – This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as an input
pin to load programming data into the device. SDI/IN 0 also is used as
one of the two control pins for the isp state machine.
Input – This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as a pin to
control the operation of the isp state machine.
Input/Output – This pin performs two functions. It is a dedicated input
pin when ispEN is logic high. When ispEN is logic low, it functions as
an output pin to read serial shift register data.
Input – This pin performs two functions. It is a dedicated input when
ispEN is logic high. When ispEN is logic low, it functions as a clock pin
for the Serial Shift Register.
Active Low (0) Reset pin which resets all of the GLB and I/O registers
in the device.
Dedicated Clock input. This clock input is connected to one of the
clock inputs of all of the GLBs on the device.
Dedicated clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB on the
device.
Dedicated clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB and/or
any I/O cell on the device.
Dedicated clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any I/O cell on the
device.
Ground (GND)
V
CC
GND 46, 76,106, 16
VCC 15, 45, 77, 107
Input/Output Pins - These are the general purpose I/O pins used by the
logic array.
I/O 0 - I/O 5 20, 21, 22, 23, 24, 25,
I/O 6 - I/O 11 26, 27, 28, 29, 30, 31,
I/O 12 - I/O 17 32, 33, 34, 35, 36, 37,
I/O 18 - I/O 23 38, 39, 40, 41, 42, 43,
I/O 24 - I/O 29 49, 50, 51, 52, 53, 54,
I/O 30 - I/O 35 55, 56, 57, 58, 59, 60,
I/O 36 - I/O 41 61, 62, 63, 64, 65, 66,
I/O 42 - I/O 47 67, 68, 69, 70, 71, 72,
I/O 48 - I/O 53 80, 81, 82, 83, 84, 85,
I/O 54 - I/O 59 86, 87, 88, 89, 90, 91,
I/O 60 - I/O 65 92, 93, 94, 95, 96, 97,
I/O 66 - I/O 71 98, 99,100,101,102,103,
I/O 72 - I/O 77 109,110,111,112,113,114,
I/O 78 - I/O 83 115,116,117,118,119,120,
I/O 84 - I/O 89 1, 2, 3, 4 5, 6,
I/O 90 - I/O 95 7, 8, 9, 10, 11, 12
IN 4 48,
IN 6 - IN 11 79,104,105, – 108, 13
Dedicated input pins to the device. (IN 2 and IN 9 not available)
RESET 18
Y0 14
Y1 78
Y2 75
Y3 74
Table 2- 0002C-48-isp
DESCRIPTIONNAME PQFP PIN NUMBERS
ispEN 17
SDI/IN 0
1
19
MODE/IN 1
1
44
SDO/IN 3
1
47
SCLK/IN 5
1
73
1. Pins have dual function capability.