Data sheet
E-DAT Industry RJ45 field plug black Cat.6 Class EA
Page 1/7
P/N
1401405012-I
EAN 4250184113881
2016-02-11
Illustrations
Dimensional drawing
See enlarged drawings at the end of document
Product specification
• multi-port Cat.6 class EA plug to be assembled in the field
• compliance with class EA to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
• 8-wire RJ45 plug for AWG 22 to be assembled in the field
• connection of AWG 26/7 - 22/7; AWG 26/1 - 22/1 possible
• solid copper wire diameter from 0.4 to 0.64 mm
• stranded copper wire diameter from 0.48 to 0.76 mm
• conductor diameter up to 1.6 mm
• cable jacket from 5.5 to 8.5 mm
• consists of only 2 parts
• easy assembly - connection without special tools
• during mounting, the cable is mechanically fastened to the stuffer cap
• easy to actuate strain relief
• strain relief can be snapped on after assembly as color coding
• zinc die-cast housing for industrial use
• protected locking hook
• can be used as test plug on IP67 protected jacks of variants 1, 4, 5, 6 and 14
• variants: T568A, T568B, Industry
Data sheet
E-DAT Industry RJ45 field plug black Cat.6 Class EA
Page 2/7
P/N
1401405012-I
EAN 4250184113881
2016-02-11
Technical Data
General Data
Fields of application Industrial Ethernet, Office
Design Plugs
Shielding shielded
Transmission technology Copper
Color black
Dimensions
Dimension (L x W x H) 51.32 x 12.90 x 14.70 mm
Dimension (L x W x H) 2.02 x 0.508 x 0.579 in.
Field assembly ability yes
Multi-port capability yes
Marking option Strain relief
Transmission characteristics
Category (ISO) 6
Class (ISO/IEC) EA
Category (TIA) 6
Remote Powering yes
PoE IEEE 802.3af
PoE plus IEEE 802.3at
UPoE yes
HDBaseT yes
Transmission rate up to 10 GBit IEEE 802.3an
Connections/interfaces
Connector technology interface 1 IDC-connection
Connector technology interface 2 RJ45 plug
Number of ports interface 2 1
Number of ports interface 2 equipped 1
Number of positions/contacts interface 1 8
Number of positions/contacts interface 2 8P/8C
Data sheet
E-DAT Industry RJ45 field plug black Cat.6 Class EA
Page 3/7
P/N
1401405012-I
EAN 4250184113881
2016-02-11
Technical Data
Connections/interfaces
Termination data, solid wire (min. - max.)
Conductor cross section, solid wire AWG 26/1 - 22/1
Conductor cross section, solid wire 0.128 - 0.324 mm²
Conductor diameter, solid wire (bare copper) 0.409 - 0.643 mm
Conductor diameter, solid wire (bare copper) 0.016 - 0.025 in.
Termination data, stranded wire (min. - max.)
Conductor cross section, stranded wire AWG 26/7 - 22/7
Conductor cross section, stranded wire 0.141 - 0.355 mm²
Conductor diameter, stranded wire (bare copper) 0.483 - 0.762 mm
Conductor diameter, stranded wire (bare copper) 0.019 - 0.030 in.
Core diameter (min. - max.)
Core diameter (conductor with insulation) 1.60 mm
Core diameter (conductor with insulation) 0.063 in.
Cable sheath diameter (min. - max.)
Cable sheath diameter 5.50 - 8.50 mm
Cable sheath diameter 0.217 - 0.335 in.
Cable access/outlet 180°
Reconnectibility yes, if cross section is greater or the same
Shield connection flexible contact spring
Electrical characteristics
Current carrying capacity max. 1 A
Contact resistance max. 20 mOhm
Insulation resistance min. 500 MOhm
Dielectric strength conductor-conductor (secondary) min. 1000 V DC
Dielectric strength conductor-shield min. 1500 V DC
Mechanical characteristics
Mounting method snap-in function
Insertion and withdrawal force max. 30 N
Life - Number of mating cycles 750
Position/mounting of latch - standard installation
position top
Strain relief yes
Data sheet
E-DAT Industry RJ45 field plug black Cat.6 Class EA
Page 4/7
P/N
1401405012-I
EAN 4250184113881
2016-02-11
Technical Data
Materials and material properties
Material - Housing GD-Zn (zinc die-cast)
Material - Insulation displacement contacts PhBr (phosphor bronze)
Material - Finish of insulation displacement contacts Ni + Au (nickel-gold)
Material - Contact CuSn (tin bronze)
Material - Contact finish Ni + Au (nickel-gold)
Material - Shield Cu-Ni-Zn (nickel silver)
Material - Shield finish Ni (nickel)
Material - Stuffer cap PA UL94-V0
Material - Strain relief PA UL94-V0
Material - Latch Plastics
Environmental conditions
Temperature (min. - max.)
Temperature - Storage °C -30 - 90 °C
Temperature - Storage °F -22 - 194 °F
Temperature - Operating °C -30 - 90 °C
Temperature - Operating °F -22 - 194 °F
Particulate ingress IP2X
Liquid ingress/immersion IPX0
Rapid change of temperature -40°C bis +70°C / 25cycles t = 30 min.
Damp heat +25°C / +77°F +65°C / +149°F / 93% RH // -10°C / -14°F / 21
cycles
Flowing mixed gas +25 °C / +77°F / 73% RH / 4 days, H2S / SO2
Electromagnetic measurement E2
Vibration 50 m/s²
Shock 250 m/s²
Approvals
RoHS compliant
UL listed (file no.) DUXR.E178484
Data sheet
E-DAT Industry RJ45 field plug black Cat.6 Class EA
Page 5/7
P/N
1401405012-I
EAN 4250184113881
2016-02-11
Technical Data
The product meets the following standards
Generic cabling systems
General requirements ISO/IEC 11801 Ed.2.2: 2011-06 | DIN EN 50173-1: 2011-09
TIA/EIA 568-B.2-10
Office buildings ISO/IEC 11801 Ed.2.2: 2011-06 | DIN EN 50173-2: 2011-09
TIA/EIA 568-C
Industrial area ISO/IEC 24702 | DIN EN 50173-3: 2011-09
TIA/EIA 1005
Living units ISO/IEC 15018 | DIN EN 50173-4: 2011-09
TIA/EIA 570-B
Application-specific communications cabling systems
Profinet yes
Expansion of Communication Circuit Accessories
(DUXR) Category UL 1863
Connectors for electronic equipment
Free and fixed connectors DIN EN 60603-7-51:2011-01
Interference proof
Immunity for industrial environments DIN EN 61000-6-2:2006-03
Emission proof
Electromagnetic emission for residential,
commercial and light-industrial environments DIN EN 61000-6-3:2011-09
Climate tests IEC 60512-11
Classifications
ETIM 5.0 EC001121
ETIM 6.0 EC001121
Packing details
Type of packaging 10 pc(s) / box
Packaging unit - Weight (gram) 250.00 g
Packaging unit - Weight (pound) 0.55 lb
Packaging dimension (W x H x D) 247.00 x 161.00 x 58.00 mm
Packaging dimension (W x H x D) 9.724 x 6.339 x 2.283 in.
Data sheet
E-DAT Industry RJ45 field plug black Cat.6 Class EA
Page 6/7
P/N
1401405012-I
EAN 4250184113881
2016-02-11
Accessories
P/N Designation
1401009101-I Industry color coding clip field plug orange
1401009103-I Industry color coding clip field plug light grey
1401009104-I Industry color coding clip field plug white
1401009105-I Industry color coding clip field plug yellow
1401009106-I Industry color coding clip field plug blue
1401009107-I Industry color coding clip field plug green
