BAS16HT1 Preferred Device Switching Diode MAXIMUM RATINGS Symbol Value Unit Continuous Reverse Voltage Rating VR 75 Vdc Peak Forward Current IF 200 mAdc IFM(surge) 500 mAdc Characteristic Symbol Max Unit Total Device Dissipation FR-5 Board (Note 1) TA = 25C Derate above 25C PD 200 mW 1.57 mW/C RJA 635 C/W TJ, Tstg -55 to 150 C Peak Forward Surge Current http://onsemi.com 1 CATHODE 2 ANODE THERMAL CHARACTERISTICS Thermal Resistance Junction to Ambient Junction and Storage Temperature 2 1 SOD-323 CASE 477 STYLE 1 1. FR-4 Minimum Pad. ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max MARKING DIAGRAM Unit OFF CHARACTERISTICS Reverse Voltage Leakage Current (VR = 75 Vdc) (VR = 75 Vdc, TJ = 150C) (VR = 25 Vdc, TJ = 150C) Reverse Breakdown Voltage (IBR = 100 Adc) V(BR) Forward Voltage (IF = 1.0 mAdc) (IF = 10 mAdc) (IF = 50 mAdc) (IF = 150 mAdc) VF Diode Capacitance (VR = 0, f = 1.0 MHz) Forward Recovery Voltage (IF = 10 mAdc, tr = 20 ns) - - - 1.0 50 30 75 - A6 M mV 715 855 1000 1250 CD - 2.0 pF VFR - 1.75 Vdc Reverse Recovery Time (IF = IR = 10 mAdc, RL = 50 ) trr - 6.0 ns Stored Charge (IF = 10 mAdc to VR = 5.0 Vdc, RL = 500 ) QS - 45 pC February, 2004 - Rev. 3 1 = Specific Device Code = Date Code Vdc - - - - Semiconductor Components Industries, LLC, 2004 A6 M Adc IR ORDERING INFORMATION Device Package Shipping BAS16HT1 SOD-323 3000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: BAS16HT1/D BAS16HT1 820 +10 V 2.0 k IF 100 H tp tr 0.1 F IF t trr 10% t 0.1 F 90% D.U.T. 50 OUTPUT PULSE GENERATOR 50 INPUT SAMPLING OSCILLOSCOPE IR VR INPUT SIGNAL iR(REC) = 1.0 mA OUTPUT PULSE (IF = IR = 10 mA; MEASURED at iR(REC) = 1.0 mA) Notes: 1. A 2.0 k variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp trr Figure 1. Recovery Time Equivalent Test Circuit 10 IR , REVERSE CURRENT (A) TA = 85C 10 TA = -40C 1.0 0.1 TA = 25C 0.2 0.4 0.6 0.8 1.0 VF, FORWARD VOLTAGE (VOLTS) TA = 125C 1.0 TA = 85C 0.1 TA = 55C 0.01 0.001 1.2 TA = 150C TA = 25C 10 0 Figure 2. Forward Voltage 20 30 40 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Leakage Current 0.68 CD, DIODE CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 100 0.64 0.60 0.56 0.52 0 2 4 6 VR, REVERSE VOLTAGE (VOLTS) Figure 4. Capacitance http://onsemi.com 2 8 50 BAS16HT1 PACKAGE DIMENSIONS SOD-323 CASE 477-02 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 5. DIMENSION L IS MEASURED FROM END OF RADIUS. K A D 1 2 B DIM A B C D E H J K L E C J NOTE 3 L NOTE 5 MILLIMETERS MIN MAX 1.60 1.80 1.15 1.35 0.80 1.00 0.25 0.40 0.15 REF 0.00 0.10 0.089 0.177 2.30 2.70 0.075 --- H STYLE 1: PIN 1. CATHODE 2. ANODE SOLDERING FOOTPRINT* 0.63 0.025 0.83 0.033 1.60 0.063 2.85 0.112 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 INCHES MIN MAX 0.063 0.071 0.045 0.053 0.031 0.039 0.010 0.016 0.006 REF 0.000 0.004 0.0035 0.0070 0.091 0.106 0.003 --- BAS16HT1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. BAS16HT1/D