13PD75LDC-TO
829 Flynn Road, Camarillo, CA 93012 • Phone: (805) 445-4500 • Fax: (805) 445-4502
Email: customerservice@telcomdevices.com • Website: www.telcomdevices.com
Sheet 1 of 3
Sheet 1 of 3
The 13PD75LDC-TO, an InGaAs photodiode with a 75µm-diameter photosensitive region packaged in a TO-
46 header, is a low-dark-current version of the 13PD75 intended for high speed and low noise applications.
The diameter of the photosensitive region is sufficiently small to enable operation at low dark current and
low capacitance while large enough to allow efficient coupling to multi-mode fiber. Planar semiconductor
design and dielectric passivation provide very low noise performance. Reliability is assured by hermetic
sealing and 100% purge burn-in (200°C, 15 hours, Vr = 20V). Headers are available with either a lensed or
flat window cap. Chips can also be attached and wire bonded to customer-supplied or other specified
packages.
High Speed InGaAs p-i-n Photodiode
Features:
• Planar Structure
• Dielectric Passivation
• 100% Purge Burn-in
• High Responsivity
Operating Voltage
Dark Current
Capacitance
Responsivity
Rise/Fall
Frequency Response
Volts
nA
pF
A/W
ns
GHz
–20
0.11
0.9
0.5
0.7
0.9
1.5
0.8
–5V
–5V
1300nm
(–3dB)
Parameters Test Conditions Minimum
DEVICE CHARACTERISTICS
Typical Maximum Units
Reverse Voltage
Forward Current
Reverse Current
Operating Temperature
Storage Temperature
Soldering Temperature
30 Volts
10mA
5mA
–40°C to +85°C
–40°C to +85°C
250°C
ABSOLUTE MAXIMUM RATINGS
Standard TO-46 Lens
829 Flynn Road, Camarillo, CA 93012 • Phone: (805) 445-4500 • Fax: (805) 445-4502
Email: customerservice@telcomdevices.com • Website: www.telcomdevices.com
Sheet 2 of 3
Sheet 2 of 3
Mechanical Specifications
TO-46 Header Packages
Custom packaging is also available.
0.210
0.184
0.030
0.144
1.00
0.017 3X
0.050
0.040
0.040
22.5°CASE
CATHODE
(BIAS +)
ANODE
(BIAS –)
LENS
CHIP
TO-46 Ultra Flat Window
829 Flynn Road, Camarillo, CA 93012 • Phone: (805) 445-4500 • Fax: (805) 445-4502
Email: customerservice@telcomdevices.com • Website: www.telcomdevices.com
Sheet 3 of 3
Sheet 3 of 3
Mechanical Specifications
TO-46 Header Packages
Custom packaging is also available.
0.100 [2.54]
0.185 [4.70]
0.212 [5.38]
0.125 [3.17]
0.011 [0.28]
1.0 [25.4]
0.011 [0.28]
0.015 [0.38] TYP. 0.019 MAX.
WINDOW SURFACE TO CHIP SURFACE
CATHODE (BIAS +)
45°
CASE/GND
0.05 [1.27] 0.040 [1.02]
0.017 [0.43] 3X
0.05 [1.27]
0.049 [1.25] φ REF.
ANODE(BIAS –)
0.015 [0.38] TYP. 0.019 MAX
CHIP
A
- A -
NOT TO SCALE