Dec-09-2004
1
BAS3010A...
Low VF Schottky Diode
Preliminary data
• Forward current: 1 A
• Reverse voltage: 30 V
• Very low forward voltage (typ. 0.41V @ IF = 1A)
• For high efficiency DC / DC conversion,
fast switching, protection and
clamping applications
BAS3010A-03W
Type Package Configuration Marking
BAS3010A-03W* SOD323 single 4/ blue
* Preliminary data
Maximum Ratings at T
A
= 25°C, unless otherwise specified
Parameter Symbol Value Unit
Diode reverse voltage1) VR30 V
Forward current1) IF1 A
Non-repetitive peak surge forward current
(t ≤ 10ms) IFSM 5
Junction temperature T
j
150 °C
Operating temperature range To
p
-65 ... 125
Storage temperature Tst
g
-65 ... 150
Thermal Resistance
Parameter Symbol Value Unit
Junction - soldering point2) RthJS ≤ 82 K/W
1For TA > 25°C the derating of VR and IF has to be considered. Please refer to the attached curves.
2For calculation of RthJA please refer to Application Note Thermal Resistance
Dec-09-2004
2
BAS3010A...
Electrical Characteristics at T
A
= 25°C, unless otherwise specified
Parameter Symbol Values Unit
min. typ. max.
DC Characteristics
Reverse current1)
VR = 10 V
VR = 30 V
IR
-
-
10
40
50
200
µA
Forward voltage1)
IF = 1 mA
IF = 10 mA
IF = 100 mA
IF = 500 mA
IF = 1 A
VF
-
-
-
-
-
170
220
290
350
410
220
270
340
410
470
AC Characteristics
Diode capacitance
VR = 5 V, f = 1 MHz CT- 28 35 pF
1Pulsed test: tp = 300 µs; D = 0.01
Package SOD323
2
1
Cathode
marking
0
1.25
1.7
-0.1
±0.2
2.5
0.3
0.15 -0.06
DIN 6784
acc. to
+0.15
A
M
0.25
+0.1
-0.1
+0.2
+0.2
±0.05
+0.1
-0.05
-0.1
+0.2
0.9
0.3
A
-0.2
+0.05
1.7
0.6
0.8
0.8
Type code
Laser marking
BAR63-03W
Cathode marking
Example
0.2
4
8
2.9
1
2
1.35
0.65
Cathode
marking
Package Outline
Foot Print
Marking Layout
Packing
Code E6327: Reel ø180 mm = 3.000 Pieces/Reel
Code E6433: Reel ø330 mm = 10.000 Pieces/Reel
Impressum
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München
© Infineon Technologies AG 2005.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be
considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of
non-infringement, regarding circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices
please contact your nearest Infineon Technologies Office (www.Infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon
Technologies Office.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body, or
to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.