BAS3010A... Low VF Schottky Diode Preliminary data * Forward current: 1 A * Reverse voltage: 30 V * Very low forward voltage (typ. 0.41V @ I F = 1A) * For high efficiency DC / DC conversion, fast switching, protection and clamping applications BAS3010A-03W Type BAS3010A-03W* Package SOD323 Configuration single Marking 4/ blue * Preliminary data Maximum Ratings at TA = 25C, unless otherwise specified Parameter Symbol Value Unit Diode reverse voltage1) VR 30 V Forward current1) IF 1 A Non-repetitive peak surge forward current I FSM 5 (t 10ms) 150 Junction temperature Tj Operating temperature range T op -65 ... 125 Storage temperature T stg -65 ... 150 Thermal Resistance Parameter Symbol Junction - soldering point2) RthJS C Value Unit 82 K/W 1For TA > 25C the derating of VR and IF has to be considered. Please refer to the attached curves. 2For calculation of RthJA please refer to Application Note Thermal Resistance 1 Dec-09-2004 BAS3010A... Electrical Characteristics at TA = 25C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Reverse current1) IR VR = 10 V - 10 50 VR = 30 V - 40 200 IF = 1 mA - 170 220 IF = 10 mA - 220 270 IF = 100 mA - 290 340 IF = 500 mA - 350 410 IF = 1 A - 410 470 - 28 35 Forward voltage1) Unit A VF AC Characteristics Diode capacitance CT pF VR = 5 V, f = 1 MHz 1Pulsed test: tp = 300 s; D = 0.01 2 Dec-09-2004 Package SOD323 Package Outline 0.9 +0.2 -0.1 1.25 +0.2 -0.1 0 0.05 A 2 1.7 +0.2 -0.1 2.5 0.2 +0.15 acc. to DIN 6784 Cathode marking 1 0.3 +0.1 -0.05 0.25 M 0.3 +0.05 -0.2 0.15 +0.1 -0.06 A 0.8 1.7 0.8 Foot Print 0.6 Marking Layout Type code BAR63-03W Laser marking Cathode marking Example Packing Code E6327: Reel o180 mm = 3.000 Pieces/Reel Code E6433: Reel o330 mm = 10.000 Pieces/Reel 0.2 2 Cathode marking 0.65 1.35 8 2.9 4 1 Impressum Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 Munchen (c) Infineon Technologies AG 2005. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.Infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.