B39242B8328P810 - EPCOS (TDK) EPCOS (TDK) TDK Corporation

EPCOS AG 2014. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SAW Components

BAW Bluetooth/WLAN Filter

Series/type:

Ordering code: B8328

B39242B8328P810

Date:

Version: December 01, 2014

2.1

2December 01, 2014

B8328

2442.0 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet

Application

■Low-loss BAW RF single filter for Bluetooth/WLAN

with LTE Band 7 / Band 40 / Band 41 coexistence

■Usable passband 79.0 MHz

■Unbalanced to unbalanced operation

■Excellent insertion loss

■High out of band selectivity

■Filter impedance 50 Ω

■Excellent B7 attenuation

■Superior 2nd harmonic suppression

Features

■Package size 1.4 x 1.1 mm2

■Package height 0.45 mm max

■RoHS compatible

■Approximate weight 0.0012 g

■Package for Surface Mount Technology (SMT)

■Ni, gold-plated terminals

■Electrostatic Sensitive Device (ESD)

■Moisture Sensitivity Level 3 (MSL 3)

1.1

1.4

2 3

0.325

0.25

0.575

0.5 0.5

bottom view

0.45 max.

side view

top view

Pin configuration

■1 Input (unbalanced)

■4 Output (unbalanced)

■2,3,5 To be grounded

3December 01, 2014

B8328

2442.0 MHz

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet

Please read cautions and warnings and

important notes at the end of this document.

Characteristics of Filter

Temperature range for specification: T= –20 ˚C to +85 ˚C

Terminating source impedance: ZS=50 Ωshunt coil 6.8 nH

Terminating load impedance: ZL=50 Ωshunt coil 6.8 nH

B8328

Characteristics min. typ.

@ 25 ˚C max.

Center frequency fC2442.0 MHz

Maximum insertion attenuation - WLAN1)

1) Averaged values within each WiFi channel width of 17.8 MHz

αmax

2403.1 ... 2420.9 MHz (channel 1)1) 1.4 2.1 dB

2408.1 ... 2425.9 MHz (channel 2)1) 1.25 1.8 dB

2413.1 ... 2470.9 MHz (channel 3-11)1) 1.1 1.7 dB

2458.1 ... 2475.9 MHz (channel 12)1) 1.3 2.2 dB

2463.1 ... 2480.9 MHz (channel 13)1) 1.65 2.9 dB

Maximum insertion attenuation - BT2)

2) Averaged values over whole passband due to frequency hopping in Bluetooth mode

αmax

2401.5 ... 2480.5 MHz 1.32) 2.02) dB

VSWR (Input and Output)

2403.1 ... 2475.9 MHz 1.7 2.4

2463.1 ... 2480.9 MHz 1.85

Attenuation α

100.0...1805.0MHz 34 37 dB

1805.0...2170.0MHz 35 38 dB

2300.0...2360.0MHz3) 34 41 dB

2360.0...2365.0MHz3) 40 46 dB

2365.0...2370.0MHz3)

3) Averaged value of linear S-parameter over 5 MHz

40 48 dB

2500.0...2505.0MHz3) 434)

4) +25˚C to +85˚C

62 dB

2505.0...2570.0MHz3) 42 49 dB

2570.0...2620.0MHz3) 40 45 dB

2620.0...2690.0MHz3) 40 45 dB

4800.0...5805.0MHz 18 31 dB

2nd Harmonics

CW tone at input, 2442 MHz, 22 dBm -63 dBc

4December 01, 2014

B8328

2442.0 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet

Maximum ratings

Matching network

■Lin = 6.8 nH

■Lout = 6.8 nH

■Recommendation to use TDK MLG0603 P-series

Operable temperature range T–30/+85 ˚C

Storage temperature range Tstg –40/+90 ˚C

DC voltage VDC 51)

1) 168h Damp Heat Steady State acc. to IEC60068-2-67 Cy

ESD voltage VESD 502)

2) acc. to JESD22-A115B (MM - Machine Model), 10 negative and 10 positive pulses

VMachine Model

3003)

3) acc. to JESD22-A114F (HBM - Human Body Model), 1 negative and 1 positive pulses

VHuman Body Model

6004)

4) acc. to JESD22-C101C (CDM - Field Induced Charged Device Model), 3 negative and 3 positive pulses

VCharged Device Model

Input power at PIN1

channel 1 to channel 13 26 dBm 20M MHz OFDM signal, 65˚C,

5000 hr

Antenna

Lout

Port 4

Lin

Input

Port 1

5December 01, 2014

B8328

2442.0 MHz

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet

Please read cautions and warnings and

important notes at the end of this document.

Transfer function

6December 01, 2014

B8328

2442.0 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet

S11VSWR

S22VSWR

7December 01, 2014

B8328

2442.0 MHz

SAW Components

BAW Bluetooth/WLAN Filter

Datasheet

Please read cautions and warnings and

important notes at the end of this document.

References

Type B8328

Ordering code B39242B8328P810

Marking and package C61157-A8-A116

Packaging F61074-V8237-Z000

Date codes L_1126

S-parameters B8328_NB.s2p, B8328_WB.s2p

See file header for port/pin assignment table.

Soldering profile S_6001

RoHS compatible RoHS-compatible means that products are compatible with the

requirements according to Art. 4 (substance restrictions) of Di-

rective 2011/65/EU of the European Parliament and of the

CouncilofJune8th, 2011,ontherestrictionoftheuseofcertain

hazardous substances in electrical and electronic equipment

("Directive")withdueregardtotheapplicationofexemptionsas

per Annex III of the Directive in certain cases.

Moldability Before using in overmolding environment, please contact your

EPCOS sales office.

Matching coils See Inductor pdf-catalog

http://

www

.tdk.co.jp/tefe02/coil.htm#aname1

and Data Library for circuit simulation

http://www.tdk.co.jp/etvcl/index.htm

For further information please contact your local EPCOS sales office or visit our webpage at

www.epcos.com .

Published by EPCOS AG

Systems, Acoustics, Waves Business Group

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2014. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

the type in question please also contact one of our Sales Offices.

8December 01, 2014

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately

incumbent on the customer to check and decide whether an EPCOS product with the

properties described in the product speciﬁcation is suitable for use in a particular customer

application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as speciﬁed. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained

by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-speciﬁc products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current

version of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,

CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,

SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse,

WindCap are trademarks registered or pending in Europe and in other countries. Further

information will be found on the Internet at www.epcos.com/trademarks.