271
800-262-IDEC (4332) • USA & Canada
HS6B
Standard Interlock Safety Switches
Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work
HS6B Subminiature Interlock Switches
Key features:
• Only 78 x 30 x 15mm
• Two actuator entrances provide flexibility for installation options
• Integrated molded cable reduces wiring time
• IP67 (IEC60529)
• Direct Opening Action
• Actuators comply with ISO14119 and EN1088
GS-ET-15
BG standard in Germany
Direct Opening
Action
Double
Insulation
Part Numbers
Contact Configuration Cable
Length Part Number
1NC-1NO
3433
12
Zb
11
1m HS6B-11B01
3m HS6B-11B03
5m HS6B-11B05
2NC
3231
11
Zb
12
1m HS6B-02B01
3m HS6B-02B03
5m HS6B-02B05
2NC-1NO
3433
12
22
Zb
11
21
1m HS6B-12B01
3m HS6B-12B03
5m HS6B-12B05
3NC
31
21
11
Zb
32
22
12
1m HS6B-03B01
3m HS6B-03B03
5m HS6B-03B05
Standard stock items in bold.
Actuator Keys (order separately)
Appearance Part Number Shape
HS9Z-A61 Straight
HS9Z-A62 Right-angle
HS9Z-A65 Adjustable actuator
90° angle
HS9Z-A66 Adjustable actuator
180° angle
Actuators are not included and must be ordered separately.
Contact Configuration & Operation Chart
3NC
2NC-1NO
2NC
1NC-1NO
HS6B-02
HS6B-03
HS6B-12
HS6B-11
Actuator inserted completely Actuator removed completely
: Contact OFF (open)
Contact Operation ChartContact ConfigurationType
3433
3231
3433
12
Zb
11
11
Zb
12
12
22
Zb
11
21
31
21
11
Zb
32
22
12
21-22
33-34
11-12
31-32
11-12
21-22
5.8 28.2 (Travel: mm)
31-32
11-12
33-34
11-12
0
0.8 (Actuator Mounting Reference Position)
: Contact ON (closed)
5.5
OverviewXW Series E-StopsInterlock SwitchesEnabling SwitchesSafety Control RelaysLight CurtainsAS-Interface Safety at Work
HS6B Standard Interlock Safety Switches
272 www.IDEC.com
Specifications
Conforming to Standards EN1088, IEC60947-5-1, EN60947-5-1, GS-ET-15, IEC60664-1, IEC60204-1, EN60204-1, UL508,
CSA C22.2 No. 14
Operating Temperature –25 to +70˚C (no freezing)
Storage Temperature –40 to +80˚C (no freezing)
Relative Humidity 45 to 85% RH (no condensation)
Storage Humidity 95% maximum (no condensation)
Altitude 2,000m maximum
Pollution Degree 3
Rated Insulation Voltage (Ui)300V
Impulse Withstand Voltage (Uimp)4kv
Insulation Resistance Between live & dead metal parts: 100MΩ maximum
Between positive & negative live parts: 100MΩ minimum
Electric Shock Protection Class Class II
Degree of Protection IP67 (IEC60529)
Vibration
Resistance
Operating Extremes 5 to 55 Hz, half amplitude 0.5 mm
Damage Limits 30Hz, half amplitude 1.5mm
Contact Resistance 300mΩ maximum
Shock
Resistance
Operating Extremes 300m/s2 (30G)
Damage Limits 1000m/s2 (100G)
Direct Opening Travel 8mm minimum
Direct Opening Force 60N minimum
Thermal Current (lth)2.5A
Operating Frequency 1200 operations/hour
Mechanical Life 1,000,000 operations (GS-ET-15)
Recommended Actuation Speed 0.05 to 1.0m/s
Wire Tensile Strength 50N minimum
Electrical Life 100,000 operations (at full rated load)
Conditional Short-Circuit Current 50A 250V (IEC60947-5-1, IEC60269-1, -2)
Weight 120g
Contact Ratings
Rated Operating Current (Ie)
Operating Voltage (Ue) 30V 125V 250V
AC Resistive load (AC-12) – 2.5A 1.5A
Inductive load (AC-15) – 1.5A 0.75A
DC
Resistive load (DC-12) 2.5A 1.1A 0.55A
(2A) (0.4)A (0.2A)
Inductive load (DC-13) 2.3A 0.55A 0.27A
(1A) (0.22A) (0.1A)
273
800-262-IDEC (4332) • USA & Canada
HS6B
Standard Interlock Safety Switches
Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work
Installation Notes
Recommended Screw Torque
• Safety switch body installation (M4 screw): 1.0~1.5N-m
• Actuator installation (M4 screw): 1.0~1.5N-m
Handling Cables
• Do not tighten or loosen the fastened cable conduit of the safety switch
• Minimum bend radius of installed cable: 40mm
Wiring Designations
Part Number Contact Terminal # Color
HS6B-12B01
(2NC-1NO)
NC 11-12 blue-blue/white
NC 21-22 brown-brown/white
NO 33-34 orange-orange/white
HS6B-03B01
(3NC)
NC 11-12 blue-blue/white
NC 21-22 brown-brown/white
NC 31-32 orange-orange/white
HS6B-11B01
(1NC-1NO)
NC 11-12 blue-blue/white
NO 33-34 orange-orange/white
HS6B-02B01
(2NC)
NC 11-12 blue-blue/white
NC 31-32 orange-orange/white
Dimensions (mm)
HS6B Installation
Slot Plug (Note 1)
(supplied)
(58)
R2.2
4
4
(ø7.6)
5.5
10.4
27.6
(9)
11
78
35
20
30
10.1
5.5
10.4
15
• Interlock Switch • Mounting Hole Layout
• Using the HS9Z-A61 Straight Actuator • Using the HS9Z-A62 Right-angle Actuator • Using the HS9Z-A65/A66
Angle Adjustable Actuator
Actuator Stop
(Note 2) (supplied)
(21.4)
22.6±1
(14)
(41.4)
40.1±1
0.8
0.8
(5)
Actuator Stop
(Note 2)
(supplied)
(12.6±1)
(30.1±1)
(14)50.8
30.8
(5)
0.8
0.8
Actuator Stop
(Note 2) (supplied)
0.8
48.8
28.8
0.8
15.1±1 (25)
(25)
22.6±1
(ø4.3 or M4 tapped)
2-M4 Screws
The interlock switch can be
mounted in two directions.
20 to 22
Note 1: Plug the unused actuator
entry slot using the slot plug
supplied with the interlock switch.
Slot Plug (Note 1)
(supplied)
(58)
R2.2
4
4
(ø7.6)
5.5
10.4
27.6
(9)
11
78
35
20
30
10.1
5.5
10.4
15
• Interlock Switch • Mounting Hole Layout
• Using the HS9Z-A61 Straight Actuator • Using the HS9Z-A62 Right-angle Actuator • Using the HS9Z-A65/A66
Angle Adjustable Actuator
Actuator Stop
(Note 2) (supplied)
(21.4)
22.6±1
(14)
(41.4)
40.1±1
0.8
0.8
(5)
Actuator Stop
(Note 2)
(supplied)
(12.6±1)
(30.1±1)
(14)50.8
30.8
(5)
0.8
0.8
Actuator Stop
(Note 2) (supplied)
0.8
48.8
28.8
0.8
15.1±1 (25)
(25)
22.6±1
(ø4.3 or M4 tapped)
2-M4 Screws
The interlock switch can be
mounted in two directions.
20 to 22
Note 1: Plug the unused actuator
entry slot using the slot plug
supplied with the interlock switch.
Using straight actuator (HS9Z-A61) Using Right-angle actuator (HS9Z-A62) Using Angle Adjustable Actuator (HS9Z-
A65/A66)
Slot Plug (Note 1)
(supplied)
(58)
R2.2
4
4
(ø7.6)
5.5
10.4
27.6
(9)
11
78
35
20
30
10.1
5.5
10.4
15
• Interlock Switch • Mounting Hole Layout
• Using the HS9Z-A61 Straight Actuator • Using the HS9Z-A62 Right-angle Actuator • Using the HS9Z-A65/A66
Angle Adjustable Actuator
Actuator Stop
(Note 2) (supplied)
(21.4)
22.6±1
(14)
(41.4)
40.1±1
0.8
0.8
(5)
Actuator Stop
(Note 2)
(supplied)
(12.6±1)
(30.1±1)
(14)50.8
30.8
(5)
0.8
0.8
Actuator Stop
(Note 2) (supplied)
0.8
48.8
28.8
0.8
15.1±1 (25)
(25)
22.6±1
(ø4.3 or M4 tapped)
2-M4 Screws
The interlock switch can be
mounted in two directions.
20 to 22
Note 1: Plug the unused actuator
entry slot using the slot plug
supplied with the interlock switch.
Slot Plug (Note 1)
(supplied)
(58)
R2.2
4
4
(ø7.6)
5.5
10.4
27.6
(9)
11
78
35
20
30
10.1
5.5
10.4
15
• Interlock Switch • Mounting Hole Layout
• Using the HS9Z-A61 Straight Actuator • Using the HS9Z-A62 Right-angle Actuator • Using the HS9Z-A65/A66
Angle Adjustable Actuator
Actuator Stop
(Note 2) (supplied)
(21.4)
22.6±1
(14)
(41.4)
40.1±1
0.8
0.8
(5)
Actuator Stop
(Note 2)
(supplied)
(12.6±1)
(30.1±1)
(14)50.8
30.8
(5)
0.8
0.8
Actuator Stop
(Note 2) (supplied)
0.8
48.8
28.8
0.8
15.1±1 (25)
(25)
22.6±1
(ø4.3 or M4 tapped)
2-M4 Screws
The interlock switch can be
mounted in two directions.
20 to 22
Note 1: Plug the unused actuator
entry slot using the slot plug
supplied with the interlock switch.
Gland
(100)
40 mm
Minimum
Radius
OverviewXW Series E-StopsInterlock SwitchesEnabling SwitchesSafety Control RelaysLight CurtainsAS-Interface Safety at Work
HS6B Standard Interlock Safety Switches
274 www.IDEC.com
Straight actuator (HS9Z-A61) Right-angle actuator (HS9Z-A62) Actuator Installation
Orienting Insert
Horizontal Adjustment Vertical Adjustment
• Angle Adjustmentable Actuator
(HS9Z-A66)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
Actuator Stop (supplied)
(Note 2)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Vertical Adjustment
20°
The HS9Z-A65 and HS9Z-A66 have the
metal key inserted in opposite directions.
The orientation of actuator adjustment (horizontal/vertical) can be
changed using the orienting insert (white plastic) installed on the
back of the actuator.
The base is made of glass-reinforced PA66 (66 nylon).
Angle adjustment screws are stainless steel. When using adhesive
on screws, take material compatibility into consideration.
Note 2: After mounting the actuator, remove the actuator
stop from the interlock switch.
• Straight Actuaor (HS9Z-A61)
• Right-angle Actuator (HS9Z-A62)
(M4 Holes)
Vertical Adjustment
2
5.5
16.8
25
Angle Adjustment
(M3 Hexagon
Socket Head Screw)
Orienting Insert
34
7.5
28.2 13
2.5
20°
15
R2.1
• Angle Adjustmentable Actuator (HS9Z-A65)
Orienting Insert
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
0.8
1.2
3.5
Actuator Stop (supplied)
(Note 2)
Rubber Bushing
3.5
1.2
When
mounted (5)
10.4
2-ø9
14
8.4
43.2
14 15 0.8
(15.8)
20.9
2-ø4.3
When mounted (33.8)
When
mounted (5.6)
8.4
0.8
Actuator Stop (supplied)
(Note 2)
When mounted (5)
Rubber
Bushing
14
2-ø4.3
34
1413.1
3.5
1.2
2-ø9
• Actuator Mounting Hole Layout
2-M4 Screws
(ø4.3 or M4 tapped)
Straight/Right-angle
Actuator
14
Angle Adjustable Actuator
2-M4 Screws
(ø4.3 or M4 tapped)
25
Orienting Insert
Horizontal Adjustment Vertical Adjustment
• Angle Adjustmentable Actuator
(HS9Z-A66)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
Actuator Stop (supplied)
(Note 2)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Vertical Adjustment
20°
The HS9Z-A65 and HS9Z-A66 have the
metal key inserted in opposite directions.
The orientation of actuator adjustment (horizontal/vertical) can be
changed using the orienting insert (white plastic) installed on the
back of the actuator.
The base is made of glass-reinforced PA66 (66 nylon).
Angle adjustment screws are stainless steel. When using adhesive
on screws, take material compatibility into consideration.
Note 2: After mounting the actuator, remove the actuator
stop from the interlock switch.
• Straight Actuaor (HS9Z-A61)
• Right-angle Actuator (HS9Z-A62)
(M4 Holes)
Vertical Adjustment
2
5.5
16.8
25
Angle Adjustment
(M3 Hexagon
Socket Head Screw)
Orienting Insert
34
7.5
28.2 13
2.5
20°
15
R2.1
• Angle Adjustmentable Actuator (HS9Z-A65)
Orienting Insert
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
0.8
1.2
3.5
Actuator Stop (supplied)
(Note 2)
Rubber Bushing
3.5
1.2
When
mounted (5)
10.4
2-ø9
14
8.4
43.2
14 15 0.8
(15.8)
20.9
2-ø4.3
When mounted (33.8)
When
mounted (5.6)
8.4
0.8
Actuator Stop (supplied)
(Note 2)
When mounted (5)
Rubber
Bushing
14
2-ø4.3
34
1413.1
3.5
1.2
2-ø9
• Actuator Mounting Hole Layout
2-M4 Screws
(ø4.3 or M4 tapped)
Straight/Right-angle
Actuator
14
Angle Adjustable Actuator
2-M4 Screws
(ø4.3 or M4 tapped)
25
2-M4 Screws
(ø4.3 or M4 tapped)
Straight/Right-angle
Actuator
14
Angle Adjustable Actuator
2-M4 Screws
(ø4.3 or M4 tapped)
25
Adjustable Actuator (HS9Z-A65) Adjustable Actuator (HS9Z-A66)
Orienting Insert
Horizontal Adjustment Vertical Adjustment
• Angle Adjustmentable Actuator
(HS9Z-A66)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
Actuator Stop (supplied)
(Note 2)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Vertical Adjustment
20°
The HS9Z-A65 and HS9Z-A66 have the
metal key inserted in opposite directions.
The orientation of actuator adjustment (horizontal/vertical) can be
changed using the orienting insert (white plastic) installed on the
back of the actuator.
The base is made of glass-reinforced PA66 (66 nylon).
Angle adjustment screws are stainless steel. When using adhesive
on screws, take material compatibility into consideration.
Note 2: After mounting the actuator, remove the actuator
stop from the interlock switch.
• Straight Actuaor (HS9Z-A61)
• Right-angle Actuator (HS9Z-A62)
(M4 Holes)
Vertical Adjustment
2
5.5
16.8
25
Angle Adjustment
(M3 Hexagon
Socket Head Screw)
Orienting Insert
34
7.5
28.2 13
2.5
20°
15
R2.1
• Angle Adjustmentable Actuator (HS9Z-A65)
Orienting Insert
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
0.8
1.2
3.5
Actuator Stop (supplied)
(Note 2)
Rubber Bushing
3.5
1.2
When
mounted (5)
10.4
2-ø9
14
8.4
43.2
14 15 0.8
(15.8)
20.9
2-ø4.3
When mounted (33.8)
When
mounted (5.6)
8.4
0.8
Actuator Stop (supplied)
(Note 2)
When mounted (5)
Rubber
Bushing
14
2-ø4.3
34
1413.1
3.5
1.2
2-ø9
• Actuator Mounting Hole Layout
2-M4 Screws
(ø4.3 or M4 tapped)
Straight/Right-angle
Actuator
14
Angle Adjustable Actuator
2-M4 Screws
(ø4.3 or M4 tapped)
25
Orienting Insert
Horizontal Adjustment Vertical Adjustment
• Angle Adjustmentable Actuator
(HS9Z-A66)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
Actuator Stop (supplied)
(Note 2)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Vertical Adjustment
20°
The HS9Z-A65 and HS9Z-A66 have the
metal key inserted in opposite directions.
The orientation of actuator adjustment (horizontal/vertical) can be
changed using the orienting insert (white plastic) installed on the
back of the actuator.
The base is made of glass-reinforced PA66 (66 nylon).
Angle adjustment screws are stainless steel. When using adhesive
on screws, take material compatibility into consideration.
Note 2: After mounting the actuator, remove the actuator
stop from the interlock switch.
• Straight Actuaor (HS9Z-A61)
• Right-angle Actuator (HS9Z-A62)
(M4 Holes)
Vertical Adjustment
2
5.5
16.8
25
Angle Adjustment
(M3 Hexagon
Socket Head Screw)
Orienting Insert
34
7.5
28.2 13
2.5
20°
15
R2.1
• Angle Adjustmentable Actuator (HS9Z-A65)
Orienting Insert
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
20°
0.8
1.2
3.5
Actuator Stop (supplied)
(Note 2)
Rubber Bushing
3.5
1.2
When
mounted (5)
10.4
2-ø9
14
8.4
43.2
14 15 0.8
(15.8)
20.9
2-ø4.3
When mounted (33.8)
When
mounted (5.6)
8.4
0.8
Actuator Stop (supplied)
(Note 2)
When mounted (5)
Rubber
Bushing
14
2-ø4.3
34
1413.1
3.5
1.2
2-ø9
• Actuator Mounting Hole Layout
2-M4 Screws
(ø4.3 or M4 tapped)
Straight/Right-angle
Actuator
14
Angle Adjustable Actuator
2-M4 Screws
(ø4.3 or M4 tapped)
25
275
800-262-IDEC (4332) • USA & Canada
HS6B
Standard Interlock Safety Switches
Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work
Minimum Radius of Hinged Door
• When using the interlock switch for a hinged door, refer to the minimum
radius of doors shown below. For doors with small minimum radius, use angle
adjustable actuators (HS9Z-A65 or HS9Z-A66).
Note: Because deviation or dislocation of hinged door may occur in actual applications, make sure
of the correct operation before installation.
HS9Z-A62 Actuator
• When the door hinge is on the extension line of the interlock switch surface:
Door Hinge
160 mm
Minimum Radius
Door Hinge
160 mm
Minimum Radius
• When the door hinge is on the extension line of the actuator mounting
surface:
Door Hinge
230 mm
Minimum Radius
Door Hinge
230 mm
Minimum Radius
When using the HS9Z-A65/HS9Z-A66 Angle Adjustable
(vertical) Actuator
• When the door hinge is on the extension line of the interlock switch surface:
Vertical SwingHorizontal Swing
Vertical SwingHorizontal Swing
Door Hinge
70 mm
Minimum Radius
70 mm
Minimum Radius
Door Hinge
Label
HS9Z-A65
HS9Z-A66
Door Hinge
Minimum Radius
50 mm
Door Hinge
Minimum Radius
50 mm
Label
Door Hinge
Minimum Radius
70 mm
Minimum Radius
70 mm
Door Hinge
Label
Minimum Radius
Door Hinge
50 mm
Minimum Radius
50 mm
Door Hinge
Label
HS9Z-A66
HS9Z-A65
HS9Z-A65
HS9Z-A66 HS9Z-A66
HS9Z-A65
• When the door hinge is on extension line of the actuator mounting surface:
Vertical SwingHorizontal Swing
Vertical SwingHorizontal Swing
Door Hinge
70 mm
Minimum Radiu
s
70 mm
Minimum Radius
Door Hinge
Label
HS9Z-A65
HS9Z-A66
Door Hinge
Minimum Radius
50 mm
Door Hinge
Minimum Radius
50 mm
Label
Door Hinge
Minimum Radius
70 mm
Minimum Radius
70 mm
Door Hinge
Label
Minimum Radius
Door Hinge
50 mm
Minimum Radius
50 mm
Door Hinge
Label
HS9Z-A66
HS9Z-A65
HS9Z-A65
HS9Z-A66 HS9Z-A66
HS9Z-A65
Actuator Angle Adjustment for the HS9Z-A65/HS9Z-A66
• Using the angle adjustment screw, the actuator angle can be adjusted (see
figures on page 370).
• Adjustable angle: 0 to 20°
• The larger the adjusted angle of the actuator, the smaller the applicable
radius of the door opening.
• After installing the actuator, open the door. Then adjust the actuator so that
its edge can enter properly into the actuator entry slot of the interlock switch.
• After adjusting the actuator angle, apply Loctite to the adjustment screw so
that the screw will not become loose.