Series 165, 166 Retainers
Material:
.41 (.016) thick Beryllium
Copper C17510, Temper
TF00 per ASTM B534
Finish:
See finish table
pentairprotect.com 1-800-854-7086
WEIGHT
.48 g/cm (.043oz/in)
MATERIALS AND FINISH
Series 165 and 166 Retainers
56.0 N/cm (32 lbs/in)
of deflection per
spring finger
SPRING RATE
Mounting holes are offset from card
path and occur every inch, offering a
choice of mounting patterns
Independent sections
maximize contact with
printed circuit card
Turned in tabs and rigid wall
limit card excursion under
dynamic loading
Spring fingers hold card against
rigid side providing dampening
under shock and vibration
Coined edges allow
smooth insertion and
extraction without
damage to card
89066485
Dash
No.
PCB
Thickness
B Dimension
+0.38 (.015)
\-0.0 (.000)
G Dimension
+0.0 (.00)
\-0.80 (.03)
-06 1.6 (1/16) 1.91 (.075) 1.14 (.045)
-09 2.4 (3/32) 2.67 (.105) 1.91 (.075)
PCB
4.32 ± .13
(.170 ± .005)
Recommended
Mounting Dim
Break sharp edges.
.64 (.025) R
(inside) Typ.
4.19 (.165))
18.3 (.72)
Typ. 7.1 (.28) Typ.
B
(see table)
3.56 (.140
4.32 ± .13
(.170 ± .005)
2.44 ± .05 (.096 ± .002) Dia.Typ. 25.40 ± .13
(1.000 ± .005)
Tol. Noncum.
6.73
(.265)
3.18
(.125)
Typ.
G
(see table)
19.05 (.750) Typ.
4.19 (.165)
Typ.
8.18 +.25/-.50
(.322 +.010/-.020)
Length
Units: mm (in)
Unless otherwise specified:
.xx ± .25, .x ±.5 (.xxx ± .010, .xx ± .02)
165 Shown, 166 Opposite
Part Number Code
PCB Thickness
165 or 166 - 06 - 3.25 - N
1.6 (.063) ______________________________ 06
2.4 (.094) ______________________________ 09
Length
31.75 (1.25) to 311.15 (12.25) ______________________3.25
In 25.4 (1.00) increments
Other lengths available on request
Part Number Code Example:
165-06-4.25-T
Series 165 BeCu, with bright tin
finsh, 107.95 (4.25) long designed
for 1.6 (.063) thick printed circuit
boards
“T” Bright Tin plate per Mil-T-10727
“N”
“ZN”
“EN”
.005 (.0002) min.
Nickel plate per QQ-N-290 Cl. 1, Gr. F
Zinc plate per ASTM-B633 Type III (clear), SC1
Electroless nickel plate per Mil-C-26074 Cl. 1 Gr. B
FINISH TABLE
Code
Letter Finish
Finish
Nickel Plate_______________________________________N
Or choose from finish table
[blank] 165/166: no nish
Pentair may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function.
