AOZ8811-03 Ultra-Low Capacitance One-line TVS Diode General Description Features The AOZ8811-03 is a ultra-low capacitance one-line transient voltage suppressor diode designed to protect very high-speed data lines and voltage sensitive electronics from high transient conditions and ESD. ESD protection for high-speed data lines: This device incorporates one TVS diode in an ultra-small DFN 1.0 x 0.6 package. During transient conditions, the ultra-low capacitance one-line TVS diode directs the transient to ground. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (15kV air, 15kV contact discharge). Small package saves board space The AOZ8811-03 comes in an RoHS compliant DFN package and is rated over a -40C to +85C ambient temperature range. Applications The ultra-small DFN 1.0 x 0.6 x 0.4mm package makes it ideal for applications where PCB space is a premium. The small size and high ESD protection makes it ideal for protecting voltage sensitive electronics from high transient conditions and ESD. Notebook computers Typical Application - Exceeds: IEC 61000-4-2 (ESD) 20V (air), 20kV (contact) - Human Body Model (HBM) 15kV Ultra-low capacitance: 0.5pF Low clamping voltage Low operating voltage: 3.6V Green product Portable handheld devices Keypads, data lines, buttons Digital Cameras Portable GPS MP3 players Pin Configuration Signal Line Pin 1 Pin 1 Pin 2 Laser Mark Pin 2 Unidirection Protection of Single Line Rev. 1.0 August 2014 www.aosmd.com Page 1 of 7 AOZ8811-03 Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ8811DT-03 -40C to +85C DFN 1.0 x 0.6 RoHS Compliant Green Product AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information. Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating VP - VN 3.6V Peak Pulse Current (IPP), tP = 8/20s 6A Peak Pulse Power (PPP), tP = 8/20s 40W Storage Temperature (TS) -65C to +150C ESD Rating per IEC61000-4-2, Contact(1) 20kV ESD Rating per IEC61000-4-2, Air(1) 20kV Model(2) 15kV ESD Rating per Human Body Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5k. Maximum Operating Ratings Parameter Rating Junction Temperature (TJ) Rev. 1.0 August 2014 -40C to +125C www.aosmd.com Page 2 of 7 AOZ8811-03 Electrical Characteristics TA = 25C unless otherwise specified. Symbol IPP VCL VRWM IR VBR Parameter Diagram Maximum Reverse Peak Pulse Current (IEC61000-4-5 8/20s pulse)(3) Clamping Voltage @ I IPP(3) IF Working Peak Reverse Voltage Maximum Reverse Leakage Current Breakdown Voltage VCL VBR VRWM IT Test Current IF Forward Current VF Forward Voltage CJ Capacitance @ VR = 0 and f = 1MHz V IR VF IT IPP Electrical Characteristics TA = 25C unless otherwise noted, VF = 1V Max. @ IF = 10mA for all types Device VBR (V) Device VRWM (V) Min. Max. Marking Max. AOZ8811DT-03 6 3.6 4.0 10.0 VCL Max. IR (A) VF (V) Max. Typ. IPP = 1A IPP = 4A IPP = 6A 0.1 0.75 2.5 5.0 7.0 CJ (pF) Typ. Max. 0.5 0.8 Note: 3. These specifications are guaranteed by design and characterization. Rev. 1.0 August 2014 www.aosmd.com Page 3 of 7 AOZ8811-03 Typical Performance Characteristics Clamping Voltage vs. Peak Pulse Current 12 14 10 8 6 4 2 0 (tperiod = 100ns, tr = 1ns) 16 Forward Voltage (V) Clamping Voltage, VCL (V) Forward Voltage vs. Forward Current (tperiod = 100ns, tr = 1ns) 12 10 8 6 4 2 0 2 4 6 8 10 12 14 0 16 0 2 4 6 8 10 12 14 16 Forward Current (A) Peak Pulse Current, IPP (A) Typical Variation of CIN vs. VR (f = 1MHz, T = 25C) Normalized Input Capacitance 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Input Voltage (V) Rev. 1.0 August 2014 www.aosmd.com Page 4 of 7 AOZ8811-03 Package Dimensions, DFN 1.0 x 0.6 A D Pin #1 ID 0.125x45 E e 2xL O ddd M C A B A1 Seating Plane 2xb O ddd M C A B C SIDE VIEW BOTTOM VIEW RECOMMENDED LAND PATTERN 1.00 0.70 0.40 0.30 0.55 0.30 0.125x45 Dimensions in millimeters Symbols A A1 b D E e L ccc ddd Min. 0.31 0.00 0.45 0.55 0.95 Nom. 0.38 0.02 0.50 0.60 1.00 0.65 BSC 0.20 0.25 0.03 0.10 Max. 0.40 0.05 0.55 0.65 1.05 0.30 Dimensions in inches Symbols A A1 b D E e L ccc ddd Min. 0.012 0.000 0.018 0.022 0.037 Nom. Max. 0.015 0.016 0.001 0.002 0.020 0.022 0.024 0.026 0.039 0.041 0.026 BSC 0.008 0.010 0.012 0.001 0.004 UNIT: mm Notes: 1. All dimensions are in millimeters, angles are in degrees. 2. Coplanarity applies to the exposed heat sink slug as well as the terminals. Rev. 1.0 August 2014 www.aosmd.com Page 5 of 7 AOZ8811-03 Tape and Reel Dimensions, DFN 1.0 x 0.6 P1 P2 Carrier Tape T D1 E1 E2 E B0 K0 P0 D0 A0 UNIT: mm Option E2 P0 P1 A DFN 1.0x0.6/ 0.69 1.19 0.66 DFN 1.0x0.6A 0.05 0.05 0.05 (8 mm) Package A0 B0 K0 0.40 0.05 D0 1.50 8.00 1.75 0.10 +0.3/-0.1 0.10 D1 E 3.50 0.05 2.00 0.05 4.00 0.10 2.00 0.23 0.05 0.02 B 0.61 DFN 1.0x0.6/ 0.65 1.05 DFN 1.0x0.6A 0.04 0.04 0.04 (8 mm) 0.40 0.05 1.50 8.00 1.75 0.10 +0.3/-0.1 0.10 3.50 0.05 2.00 0.10 4.00 0.10 2.00 0.20 0.05 0.05 Reel E1 P2 T W1 S G N M V K R H W UNIT: mm Tape Size Reel Size 8mm o178 M o178 0.5 N o55 1 W 8.4 +1.5/-0 W1 Max. 14.4 H o13.0 0.5 K Max. 10.1 S 2.0 0.5 G N/A R N/A V N/A Leader / Trailer & Orientation TVS Unit Per Reel: 10000pcs Trailer Tape 300mm Min. Components Tape Orientation in Pocket Leader Tape 500mm Min. Trailer Tape 300mm Min. Components Tape Orientation in Pocket Leader Tape 500mm Min. MOS Unit Per Reel: 10000pcs Rev. 1.0 August 2014 www.aosmd.com Page 6 of 7 AOZ8811-03 Part Marking 6 X Product Number Code Date Code LEGAL DISCLAIMER Applications or uses as critical components in life support devices or systems are not authorized. AOS does not assume any liability arising out of such applications or uses of its products. AOS reserves the right to make changes to product specifications without notice. It is the responsibility of the customer to evaluate suitability of the product for their intended application. Customer shall comply with applicable legal requirements, including all applicable export control rules, regulations and limitations. AOS' products are provided subject to AOS' terms and conditions of sale which are set forth at: http://www.aosmd.com/terms_and_conditions_of_sale LIFE SUPPORT POLICY ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 1.0 August 2014 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 7 of 7