6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Inlet C14/C18, Screw-on Mounting, Front Side, Solder or Quick-connect, Screw Terminal C14 C18 See below: Approvals and Compliances 70 C 70 C Description - Panel mount : Screw-on mounting , Front Side - 1 Function - Appliance Inlet , Pin temperature 70 C , protection class I or II - Solder, Quick Connect or Screw Terminals Other versions on request - Variant with notch for V-Lock mating Cordsets - PCB terminals Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Landing Page Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 1.5 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I or II from front side IP20 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 PA6, black / grey / white, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6061 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40011871 UL Approvals UL UL File Number: E96454 Connectors 1 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] Countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 5 40 +0.20 19.5 - 0 R 7 +0.20 s= 40 27.3 - 0 2 27 E: Quick-connect terminals 4.8x0.8 mm: 25.3 mm E: Quick-connect terminals 6.3x0.8 mm: 26.3 mm E: Solder terminals short: 21.1 mm E: Solder terminals long: 24.5 mm 2 o 3.5/M3 19.3 22.5 o 3. 2 max. R 4 Connectors 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 V-Lock version, countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 6 40 R 5 V-Lock s= 40 +0.20 19.9 - 0 23 19.7 o 3.5/M3 o 3. 2 max. R 3 +0.20 27.6 - 0 3 27.3 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.6 mm E: Solder terminals long: 23.0 mm Through hole mounting holes, 40 mm distance, quick connect and solder terminals 50 E 5 40 +0.20 19.5 - 0 R 6 o 3.5/M3 19.3 22.5 o 3. 2 max. R 4 +0.20 s= 40 27.3 - 0 2 27 E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm E: Solder terminals short: 21.9 mm E: Solder terminals long: 25.3 mm Connectors 3 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Countersunk mounting holes, 36 mm distance, quick connect and solder terminals 48 E 5 36 R 19.5 - 0 +0.20 o 3.5/M3 19.3 22.5 o 3. 2 max. R 4 6 +0.20 s= 36 27.3 - 0 2 27 E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm E: Solder terminals short: 21.9 mm E: Solder terminals long: 25.3 mm Countersunk mounting holes, 40 mm distance, screw terminals 50 20.3 5 40 +0.20 19.3 - 0 R 7 +0.20 s= 40 27.3 - 0 2 27 4 o 3.5/M3 23 19 o 3. 2 max. R 4 Connectors 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Protection class II, countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 6 E 40 R 5 V-Lock s= 40 +0.20 19.9 - 0 23 19.7 o 3.5/M3 o 3. 2 max. R 3 +0.20 27.6 - 0 3 27.3 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.3 mm E: Solder terminals long: 23.0 mm Config. Code 6061|-|H|-|A|B|C|0-|D|-|E|G|O| The characters are placeholders for the correspondingly keys of selections from the key tables. 6061|-| H |-|A|B|C|0-|D|-|E|G|O| = Type Type Configuration key protection class II B protection class I X Protection class II only with V-Lock 6061|-|H|-| A |B|C|0-|D|-|E|G|O| = Terminals Terminal L short solder terminal (L = 4.8 mm) Configuration key 2 6061|-|H|-|A| B |C|0-|D|-|E|G|O| = Terminals Terminal N Configuration key short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 screw terminal A Symbols similar as in table A 6061|-|H|-|A|B| C |0-|D|-|E|G|O| = Terminals Terminal Ground long solder terminal (L = 8.5 mm) Blade terminal (4.8 x 0.8 mm) 3 8 Blade terminal (6.3 x 0.8 mm) 9 screw terminal A Configuration key without terminal 0 short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 screw terminal A Symbols similar as in table A Connectors 5 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 6061|-|H|-|A|B|C|0-| D |-|E|G|O| = Color Color Dimension "S" Configuration key Black A Grey B White D Configuration key 36 40 The dimension "S" is displayed in (1/10 mm). This information is also valid for the order code 6061|-|H|-|A|B|C|0-|D|-|E|G| O | = Features 6061|-|H|-|A|B|C|0-|D|-| E |G|O| = Style Style Features Configuration key flange with countersunk holes 1 flange with through holes 2 Configuration key without V-Lock without V-Lock 0 V-Lock V V-Lock only with Dimension "X" = 40 6061|-|H|-|A|B|C|0-|D|-|E| G |O| = Dimension S All Variants Config. Code Description Order Number 6061-X-2220-A-136 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6162.0045 6061-X-2220-A-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6162.0046 6061-X-2220-A-240 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with through holes, dimension S: 40, features: 6162.0047 6061-X-2220-B-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 6162.0048 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features: 6061-X-3330-A-136 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L = 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6162.0049 6061-X-3330-A-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L = 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6162.0050 6061-X-3330-B-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L = 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features: 6162.0052 6061-X-8880-A-136 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm), 6162.0054 ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6061-X-8880-A-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm), 6162.0055 ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-9990-A-136 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0057 ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6061-X-9990-A-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0058 ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-9990-B-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0059 ground: Blade terminal (6.3 x 0.8 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features: 6061-X-AAA0-A-140 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: screw terminal, N: screw terminal, ground: screw terminal, color: Black, design: flange with countersunk holes, dimension S: 40, features: 6162.0061 6061-X-2220-A-140V 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock 6162.0157 6061-X-8880-A-140V 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm), 6162.0158 ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock 6061-X-9990-A-140V 6061, IEC Appliance Inlet C14, 70C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0159 ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock 6061-B-9900-A-140V 6061, IEC Appliance Inlet C18, 70C, version: protection class II, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), ground: without terminal, color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock The listet variants should be available from stock Other versions on request www.schurter.com/contact Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 6 Connectors 6162.0175 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Packaging unit 50 Pcs Accessories Description Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6061 Connector Overview complete 4022 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4022 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4012 Mounting: Power Supply Cord, 3 x 1 mm, Screw clamps, Connector: IEC C13 4012 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 Connector further types to 6061 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS 30.05.2019 Power Cord further types to 6061 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 7