03-Series DS_DA_DP-A_03-Series DS_DA_DP-A 21/11/12 18:48 Page7 DS-DP-DA series DIP switches Distinctive features and specifications Standard, piano and right angle models 2 to 12 positions Top tape sealing option ELECTRICAL SPECIFICATIONS MATERIALS * Current/voltage rating : - non-switching : 100mA 50VDC - switching : 50mA 24VDC * Contact resistance (at 100mA) : 50m max. at initial 100m after life test * Insulation resistance (at 100VDC +/-15V) : 100 M min. between adjacent terminals * Dielectric strength : 500VDC for one minute * Capacitance : 5 pF between adjacent terminals * Circuit : single pole, single throw * Electrical life : 2.000 cycles min. per switch * Case, UL94-V0, glass fiber filled PBT, black * Cover : UL94-V0,glass fiber filled PBT, red * Actuator : UL94-V0, glass fiber filled PBT, white * Terminals/contacts : gold over nickel plated phosphor bronze * Terminal seal : epoxy * Tape seal : polyester film GENERAL SPECIFICATIONS * Operating force : DP models : 4N - DS/DA models : 8N * Travel : 2 mm (.078) * Mechanical life : 5.000 cycles min. per switch * Vibration test : MIL-STD-202F method 201A * Shock test : MIL-STD-202F method 213B, conditon A * Operating temperature : -20C to +70C RECOMMENDED SOLDERING AND CLEANING PROCESSES F * Hand soldering : 320C max. for 2 seconds max. (30 watt iron max.) * Wave soldering : 260C max. for 5 seconds max. * Force rinse, high agitation or triple bath cleaning method (with tape seal, option T) : freon TF or TE. When vapor methods are used, do not subject switch to solvents above 51C. Note : keep switches in "OFF" position during soldering and cleaning for best results. Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Packaging unit : standard IC tubes - Quantities depending on model. See table below. DS/DSR Quantity DS(R)-02 DS(R)-03 DS(R)-04 DS(R)-05 DS(R)-06 DS(R)-07 DS(R)-08 DS(R)-09 DS(R)-10 DS(R)-12 72 51 40 32 27 24 21 19 17 14 APEM DS-T/DSR-T Quantity DS(R)-02T DS(R)-03T DS(R)-04T DS(R)-05T DS(R)-06T DS(R)-07T DS(R)-08T DS(R)-09T DS(R)-10T DS(R)-12T 72 51 40 32 27 24 21 19 17 14 DA Quantity DA-T Quantity DA-02 DA-03 DA-04 DA-05 DA-06 DA-07 DA-08 DA-09 DA-10 DA-12 73 52 40 33 28 24 21 19 17 14 DA-02T DA-03T DA-04T DA-05T DA-06T DA-07T DA-08T DA-09T DA-10T DA-12T 70 50 39 32 28 24 21 19 17 14 www.apem.com DP/DPL Quantity DP-T/DPL-T Quantity DP(L)-02 DP(L)-03 DP(L)-04 DP(L)-05 DP(L)-06 DP(L)-08 DP(L)-10 DP(L)-12 70 50 39 32 27 21 17 14 DP(L)-02T DP(L)-03T DP(L)-04T DP(L)-05T DP(L)-06T DP(L)-08T DP(L)-10T DP(L)-12T 65 49 39 32 27 21 17 14 F-7 03-Series DS_DA_DP-A_03-Series DS_DA_DP-A 21/11/12 18:48 Page8 DS/DSR series Standard DIP switches * Raised or recessed actuator * 2 to 12 positions 1 2 3 4 5 6 7 8 9 10 11 12 MODEL STRUCTURE Raised actuator : DS F Dim. "B" DS-03 3 9,14 (.359) 5,08 (.200) DS-04 4 11,68 (.459) 7,62 (.300) DS-05 5 14,22 (.559) 10,16 (.400) DS-06 6 16,76 (.659) 12,70 (.500) DS-07 7 19,30 (.759) 15,24 (.600) DS-08 8 21,84 (.859) 17,78 (.700) DS-09 9 24,38 (.959) 20,32 (.800) DS-10 10 26,92 (1.059) 22,86 (.900) DS-12 12 32,00 (1.259) 27,94 (1.100) 1.25 (.049) 2,54 (.100) 2.54 (.100) 0.60 (.023) 7.62 (.300) A ON 1 2 3 4 5 6 7 8 2.54 (.100) 3.60 (.141) 6,60 (.259) O0.97 (.038 DIA) 7.62 (.300) 2 1.60 (.062) 6.90 (.271) DS-02 1.40 (.055) 3.30 mini (.129 min) Dim "A" 10.16 Maxi (.400 MAX) No. Model No pos. B Top tape sealed : add "T" after model number. 2 6,60 (.259) 2,54 (.100) DSR-03 3 9,14 (.359) 5,08 (.200) DSR-04 4 11,68 (.459) 7,62 (.300) DSR-05 5 14,22 (.559) 10,16 (.400) DSR-06 6 16,76 (.659) 12,70 (.500) DSR-07 7 19,30 (.759) 15,24 (.600) DSR-08 8 21,84 (.859) 17,78 (.700) DSR-09 9 24,38 (.959) 20,32 (.800) DSR-10 10 26,92 (1.059) 22,86 (.900) DSR-12 12 32,00 (1.259) 27,94 (1.100) 2.54 (.100) 0.60 (.023) 7.62 (.300) A ON 1 2 3 4 5 6 7 8 2.54 (.100) 3.60 (.141) DSR-02 O0.97 (.038 DIA) 7.62 (.300) Dim. "B" 3.30 mini (.129 min) Dim "A" 10.16 Maxi (.400 MAX) No. Model No pos. 5.65 (.222) Recessed actuator : DSR B Top tape sealed : add "T" after model number. F-8 www.apem.com APEM 03-Series DS_DA_DP-A_03-Series DS_DA_DP-A 21/11/12 18:48 Page9 DP/DPL series Piano DIP switches * Short or long actuator * 2 to 12 positions 1 2 3 4 5 6 7 8 9 10 11 12 Note : Push down for "ON" is our standard type. Push down for "OFF" is also available on special order, consult factory. MODEL STRUCTURE Short actuator : DP A 2 6,63 (.261) 2,54 (.100) DP-03 3 9,17 (.361) 5,08 (.200) DP-04 4 11,71 (.461) 7,62 (.300) DP-05 5 14,25 (.561) 10,16 (.400) DP-06 6 16,8 (.661) 12,70 (.500) DP-08 8 21,87 (.861) 17,78 (.700) DP-10 10 26,95 (1.061) 22,86 (.900) DP-12 12 32,03 (1.261) 27,94 (1.100) 3 4 5 1 2 6 7 8 ON 2.54 (.100) 7.62 (.300) 0.60 (.023) 1.40 (.055) 2.54 (.100) O0.97 (.038 DIA) 7.62 (.300) DP-02 10.20 (.401) Dim. "B" 2.80 (.110) Dim "A" 10.80 (.425) No. Model No pos. B F Top tape sealed : add "T" after model number. Long actuator : DPL 6,63 (.261) 2,54 (.100) DPL-03 3 9,17 (.361) 5,08 (.200) DPL-04 4 11,71 (.461) 7,62 (.300) DPL-05 5 14,25 (.561) 10,16 (.400) DPL-06 6 16,8 (.661) 12,70 (.500) DPL-08 8 21,87 (.861) 17,78 (.700) DPL-10 10 26,95 (1.061) 22,86 (.900) DPL-12 12 32,03 (1.261) 27,94 (1.100) 1 2 3 4 5 2.54 (.100) 1.05 (.041) 2 6 7 8 ON 0.60 (.023) 7.62 (.300) 2.54 (.100) 1.40 (.055) O0.97 (.038 DIA) 7.62 (.300) DPL-02 10.20 (.401) Dim. "B" 2.80 (.110) Dim "A" 10.80 (.425) No. Model No pos. 12.57 (.494) A B Top tape sealed : add "T" after model number. APEM www.apem.com F-9 03-Series DS_DA_DP-A_03-Series DS_DA_DP-A 21/11/12 18:48 Page10 DA series Right angle DIP switches * 2 to 12 positions 1 2 3 4 5 6 7 8 9 10 11 12 MODEL STRUCTURE Raised actuator : DA F Dim. "B" DA-03 3 9,14 (.359) 5,08 (.200) DA-04 4 11,68 (.459) 7,62 (.300) DA-05 5 14,22 (.559) 10,16 (.400) DA-06 6 16,76 (.659) 12,70 (.500) DA-07 7 19,30 (.759) 15,24 (.600) DA-08 8 21,84 (.859) 17,78 (.700) DA-09 9 24,38 (.959) 20,32 (.800) DA-10 10 26,92 (1.059) 22,86 (.900) DA-12 12 32,00 (1.259) 27,94 (1.100) 1.60 (.063) 2,54 (.100) ON 1 2 3 4 5 6 7 8 9 10 2.54 (.100) 1.50 (.059) 2.90 (.114) 6,60 (.259) 3.50 (.137) 2 0.60 (.023) 2.54 (.100) 6.20 (.244) 6.90 (.272) DA-02 A 1.40 (.055) o0.97 (.038 DIA) 2.54 (.100) 2.54 (.100) Dim "A" 9.90 (.389) No. Model No pos. B Top tape sealed : add "T" after model number. F-10 www.apem.com APEM