Hyper Multi TOPLED(R) Enhanced optical Power LED (HOP2000 / ATON(R)) Lead (Pb) Free Product - RoHS Compliant LATB T66B Abkundigung nach OS-PD-2010-006 Obsolete acc. to OS-PD-2010-006 Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause; Kontrasterhohung durch schwarze Oberflache (RGB-Displays) und diffuses Harz * Besonderheit des Bauteils: additive Farbmischung durch unabhangige Ansteuerung aller Chips * Wellenlange: 617 nm (amber), 528 nm (true green), 470 nm (blau) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP (amber), InGaN (true green, blau) * optischer Wirkungsgrad: 24 lm/W (amber), 13 lm/W (true green), 3 lm/W (blau) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D Features * package: white P-LCC-4 package; higher contrast by a black surface (RGB-Displays) and diffused resin * feature of the device: additive mixture of color stimuli by independent driving of each chip * wavelength: 617 nm (amber), 528 nm (true green), 470 nm (blue) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP (amber), InGaN (true green, blue) * optical efficiency: 24 lm/W (amber), 13 lm/W (true green), 3 lm/W (blue) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Anwendungen * Anzeigen im Innen- und Auenbereich (z.B. im Verkehrsbereich; Laufschriftanzeigen) * Leuchtdiodenchips getrennt ansteuerbar * Vollfarbdisplays bzw. RGB-Displays * Hinterleuchtung (LCD, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Einkopplung in Lichtleiter Applications * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * LED chips can be controlled separately * full color displays, RGB-Displays * backlighting (LCD, displays, illuminated advertising, general lighting) * coupling into light guides 2010-03-16 1 LATB T66B Bestellinformation Ordering Information Lichtstarke1) Seite 21 Typ Emissionsfarbe Type Color of Emission Luminous Intensity1) page 21 IF = 20 mA IV (mcd) amber LATB T66B amber true green blue true green blue 180 ... 450 280 ... 900 71 ... 280 Bestellinformation Ordering Information Typ Type Bestellnummer Ordering Code LATB T66B-ST-1+TU7-35+QS-36 Q65110A7282 Abgekundigt nach OS-PD-2010-006 - wird ersetzt werden durch LRTB GFTM Obsolete acc. to OS-PD-2010-006 - will be replaced by LRTB GFTM Letzte Bestellung / Last Order: 2011-09-20 Letzte Lieferung / Last Delivery: 2012-03-20 Anm: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LATB T66B-ST-1+TU7-35+QS-36 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen S, S5, S7 oder T enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LATB T66B-ST-1+TU7-35+QS-36 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4, oder -5 enthalten ist (siehe Seite 5 fur nahere Information). Z.B.: LATB T66B-ST-1+TU7-35+QS-36 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LATB T66B-ST-1+TU7-35+QS-36 means that only one group S, S5, S7 or T will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LATB T66B-ST-1+TU7-35+QS-36 means that only 1 wavelength group -3, -4, or -5 will be shippable (see page 5 for explanation). E.g. LATB T66B-ST-1+TU7-35+QS-36 means that the device will be shipped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2010-03-16 2 LATB T66B Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values amber true green Einheit Unit blue Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 + 125 + 110 C Durchlassstrom Forward current (TA=25C) IF 50 20 20 mA Stostrom Surge current tp = 10 s, D = 0.005, TA=25C IFM 100 400 300 mA Sperrspannung2) Seite 21 Reverse voltage2) page 21 (TA=25C) VR 12 5 5 V Leistungsaufnahme Power consumption (TA=25C) Ptot 130 85 85 mW Rth JA Rth JA Rth JS Rth JS 480 770 260 420 530 820 290 470 530 820 290 470 K/W K/W K/W K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung3) Seite 21 Junction/ambient3) page 21 Sperrschicht/Lotpad Junction/solder point 2010-03-16 1 chip on 3 chips on 1 chip on 3 chips on 3 LATB T66B Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Symbol Symbol (typ.) Dominantwellenlange4) Seite 21 Dominant wavelength4) page 21 IF = 20 mA Werte Values Einheit Unit amber true green blue peak 628 523 465 nm dom 617 528* 470* nm -2 +7 -8 + 10 - 6.5 + 7.0 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 33 25 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. (typ.) (max.) VF VF 2.0 2.4 3.5 4.1 3.6 4.1 V V Sperrstrom (typ.) Reverse current (max.) VR = 12 V (amber); VR = 5 V (true green / blue) IR IR 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF =20 mA; -10C T 100C (typ.) TCpeak 0.13 0.04 0.05 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.06 0.03 0.04 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 1.8 - 3.6 - 3.1 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 24 13 3 lm/W Durchlassspannung5) Seite 21 Forward voltage5) page 21 IF = 20 mA * Einzelgruppen siehe Seite 7 Individual groups on page 7 2010-03-16 4 LATB T66B Farbortgruppen4) Seite 21 4) page 21 Chromaticity Coordinate Groups OHA02320 0.9 520 0.8 530 510 3 4 540 550 0.7 505 5 true green 0.6 560 570 500 0.5 580 590 600 610 620 630 amber 495 0.4 490 0.3 485 0.2 480 0.1 0 0 6 5 blue 4 460 3 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 7 Gruppe Group 3 4 5 amber 2010-03-16 Cx Cy Gruppe Group Cx Cy 0.127 0.731 3 0.139 0.038 0.162 0.757 0.152 0.057 0.195 0.677 0.144 0.077 0.164 0.659 0.129 0.056 0.149 0.747 0.135 0.044 0.191 0.753 0.149 0.065 0.218 0.673 0.140 0.090 0.183 0.671 0.123 0.068 0.174 0.755 0.130 0.054 0.220 0.746 0.145 0.075 0.243 0.664 0.135 0.106 0.205 0.674 0.117 0.085 0.680 0.320 0.125 0.067 0.670 0.320 0.141 0.088 0.688 0.302 0.130 0.130 0.699 0.301 0.109 0.109 4 5 6 5 LATB T66B Floating Bins amber S = 180 ... 280 [mcd] S5= 201 ... 315 [mcd] S7 = 224 ... 355 [mcd] S9 = 250 ... 400 mcd] T = 280 ... 450 [mcd] Floating Bins true green T = 280 ... 450 [mcd] T5 = 315 ... 502 [mcd] T7 = 355 ... 560 [mcd] T9 = 400 ... 631 [mcd] U = 450 ... 710 [mcd] U5 = 502 ... 799 [mcd] U7 = 560 ... 900 [mcd] Floating Bins blue Q = 71 ... 112 [mcd] Q5 = 80 ... 125 [mcd] Q7 = 90 ... 140 [mcd] Q9 = 100 ... 159 [mcd] R = 112 ... 180 [mcd] R5 = 125 ... 201 [mcd] R7 = 140 ... 224 [mcd] R9 = 159 ... 250 [mcd] S = 180 ... 280 [mcd] 2010-03-16 6 LATB T66B Wellenlangengruppen (Dominantwellenlange)4) Seite 21 Wavelength Groups (Dominant Wavelength)4) page 21 Gruppe Group true green Einheit Unit Gruppe Group min. max. 3 520 528 nm 4 525 533 5 530 538 blue Einheit Unit min. max. 3 463.5 469.0 nm nm 4 466.0 471.5 nm nm 5 468.5 474.0 nm 6 471.0 477.0 nm Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: S7-1+T9-4+Q7-4 Example: S7-1+T9-4+Q7-4 Helligkeitsgruppe Wellenlange Brightness Group Wavelength (no grouping) Helligkeitsgruppe Wellenlange Brightness Group Wavelength Helligkeitsgruppe Wellenlange Brightness Group Wavelength (amber) (amber) (true green) (true green) (blue) (blue) 1 T9 4 Q7 4 S7 Anm.: Note: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. No packing unit / tape ever contains more than one brightness group per color. 2010-03-16 7 LATB T66B Relative spektrale Emission6) Seite 21 Relative Spectral Emission6) page 21 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL01452 100 % I rel 80 V 60 blue 40 true green amber 20 0 350 400 450 500 550 600 650 nm 700 6) Seite 21 Abstrahlcharakteristik Radiation Characteristic6) page 21 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2010-03-16 0.8 0.6 0.4 0 20 8 40 60 80 100 120 LATB T66B Durchlassstrom fur amber6) Seite 21 Forward Current for amber6) page 21 IF = f (VF); TA = 25 C Relative Lichtstarke6) 7) Seite 21 Relative Luminous Intensity6) 7) page 21 IV/IV(20 mA) = f (IF); TA = 25 C OHL00590 10 2 OHL01473 10 1 IV IV (20 mA) mA IF 10 1 10 0 5 10 0 blue amber true green 10 -1 10 -1 5 10 -2 1.3 1.5 1.7 1.9 2.1 10 -2 0 10 2.3 V 2.5 10 1 5 mA 10 2 IF VF Relative Lichtstarke6) Seite 21 Relative Luminous Intensity6) page 21 IV/IV(25 C) = f (Tj); IF = 20 mA Durchlassstrom Forward Current IF = f (VF); TA = 25 C IF OHL01477 2.0 OHL01481 10 2 mA 5 IV IV (25 C) 1.6 amber 1.4 10 1 1.2 5 blue 1.0 blue true green 10 0.8 true green 0 0.6 5 0.4 0.2 10 -1 2 2.5 3 3.5 4 0 -40 -20 4.5 V 5 20 40 60 C 100 Tj VF 2010-03-16 0 9 LATB T66B Dominante Wellenlange6) Seite 21 Dominant Wavelength6) page 21 blue; dom = f (IF); TA = 25 C Dominante Wellenlange6) Seite 21 Dominant Wavelength6) page 21 true green; dom = f (IF); TA = 25 C OHL10503 474 nm OHL00882 550 nm dom dom 473 540 472 535 471 530 blue 470 true green 525 469 520 468 467 515 0 20 40 60 80 510 mA 120 If 2010-03-16 0 20 40 60 80 mA 120 If 10 LATB T66B Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T); 1 chip on IF Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T); 3 chips on OHL00926 60 mA IF amber 50 50 40 40 30 30 20 20 blue true green 10 OHL00928 60 mA amber blue true green 10 TA temp. ambient TA temp. ambient 0 0 20 40 60 0 80 C 100 IF IF amber 40 30 30 20 20 amber blue true green blue true green 10 TS temp. solder point 0 20 40 60 TS temp. solder point 0 80 C 100 TS 2010-03-16 80 C 100 OHL00929 50 10 60 60 mA 40 0 40 Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T); 3 chips on OHL00927 50 20 TA TA Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T); 1 chip on 60 mA 0 0 20 40 60 80 C 100 TS 11 LATB T66B Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C amber (1 Chip on) OHL00193 0.12 IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C amber (1 Chip on) A A IF 0.10 0.08 0.06 OHL01604 0.12 0.10 0.08 0.005 0.05 0.5 0.06 0.04 0.04 0.02 0.02 0.005 0.05 0.5 0 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C amber (3 Chips on) Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C amber (3 Chips on) OHL01605 0.12 A IF A IF 0.10 0.08 0.06 0.10 0.08 0.005 0.05 0.5 0.06 0.04 0.04 0.02 0.02 0 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 0.005 0.05 0.5 0 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2010-03-16 OHL01606 0.12 tp 12 LATB T66B Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C true green (1 Chip on) Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C true green (1Chip on) OHL11400 0.45 IF A tP D= T OHL11401 0.20 IF A tP IF tP tP IF D= T T T 0.35 0.15 0.30 0.25 0.20 0.15 D= D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.10 0.05 0.10 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C true green (3 Chips on) 0.20 IF A Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C true green (3 Chips on) OHL00930 t D = TP 0.045 A I tP IF F T 0.16 0.14 0.12 0.10 0.08 t D = TP IF T 0.035 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.030 0.025 0.020 0.06 0.015 0.04 0.010 0.02 0.005 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2010-03-16 OHL00931 tP tp 13 LATB T66B Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C blue (1 Chip on) OHL11405 0.35 IF A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C blue (1 Chip on) t IF IF D = TP OHL11406 0.14 tP A T 0.25 t D= T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.15 0.10 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.08 0.06 0.04 0.05 0.02 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C blue (3 Chips on) F IF D = TP 0.10 0.20 0.450 A I tP Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C blue (3 Chips on) OHL00932 t D = TP 0.100 A I tP IF F T OHL00934 t D = TP tP IF T 0.350 0.300 0.250 0.200 0.150 D= D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.050 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.100 0.050 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2010-03-16 tp 14 LATB T66B Mazeichnung8) Seite 21 Package Outlines8) page 21 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 1.7 (0.067) 2.1 (0.083) 0.8 (0.031) 0.9 (0.035) 0.6 (0.024) 0.7 (0.028) 3 A 41 1.1 (0.043) 1 4 Package marking C 0.1 (0.004) typ 0.5 (0.020) 3.7 (0.146) 3.3 (0.130) (2.4 (0.094)) 3.4 (0.134) 3.0 (0.118) 2 0.18 (0.007) 0.6 (0.024) 0.4 (0.016) C C Circuit Diagram GPLY6900 1 Cathode Amber (A) 2 Anode A, T, B 3 Cathode Blue (B) 4 Cathode True Green (T) Gewicht / Approx. weight: 35 mg Gurtung / Polaritat und Lage8) Seite 21 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 21 Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 4 (0.157) C C C A 8 (0.315) 1.75 (0.069) 2 (0.079) 3.5 (0.138) 2.9 (0.114) 4 (0.157) 3.6 (0.142) 1.5 (0.059) OHAY0095 2010-03-16 15 LATB T66B Empfohlenes Lotpaddesign8) Seite 21 Recommended Solder Pad8) page 21 IR Reflow Loten IR Reflow Soldering 3.3 (0.130) 3.3 (0.130) 0.4 (0.016) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Kathoden Markierung / Cathode marking 7.5 (0.295) 0.5 (0.020) 1.5 (0.059) 4.5 (0.177) 1.1 (0.043) Cu Flache / <_ 12 mm 2 per pad Cu-area Lotstoplack Solder resist OHLPY439 Empfohlenes Lotpaddesign8) Seite 21 Recommended Solder Pad8) page 21 3.5 (0.138) Bewegungsrichtung der Platine PCB-direction 3.5 (0.138) 1 (0.039) 8 (0.315) 2 (0.079) 2 (0.079) 3 (0.118) 6 (0.236) 2.8 (0.110) 2 (0.079) 6.1 (0.240) 2.8 (0.110) Cu Flache / > 12 mm 2 per pad Cu-area Lotstoplack Solder resist 2010-03-16 0.5 (0.020) 7.5 (0.295) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation 1.5 (0.059) Wellenloten (TTW) TTW Soldering 16 OHAY0583 LATB T66B Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C 250 T C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2010-03-16 17 s 250 LATB T66B Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lxxx xxxx Bin1: Bin Information Color 1 Bin2: Bin Information Color 2 Product Name Bin3: Bin Information Color 3 pl e Semiconductors RoHS Compliant ML Temp ST 2 245 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type Color 1 Color 2 Color 3 (G) GROUP: X-X-X+X-X-X+X-X-X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA32043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2010-03-16 18 LATB T66B Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials P -1 +Q -1 D/ C: (9 D) 20 00 (Q )Q TY : ic S R NO : O em S BA TC H (6 P) LO T (1 T) NO : (X ) PR OD 5 14 2 110 0 M DE -1 18 (G ) GR OU P: P -1 +Q R u L lt S iT Y O T67 P L 6 8 01 C: 99 D/ TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 S NO O 12 H em H S TC (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) : 12 BA 3G R A on M du O p ct to or s 44 M 2100 Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster 01 44 8 2199 A on M du O p ct to or s . RH % /60 C R 18 T6 P 76 LE . H) (R e 3G H 12 34 y dit mi ag NO : 12 nk, bla cod bar d GR OU P: M ul LS ti Y TO el see lab e If hu ive _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W flo un Ho Af qu Indno ire DE 1. e 4 8 re dy ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G ) Muster L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE DE MY Barcode label D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2010-03-16 19 OHA02044 LATB T66B Revision History: 2010-03-16 Previous Version: 2009-10-14 Page Subjects (major changes since last revision) Date of change 2, 5 floating bins 2004-10-18 4, 6 wavelength groups for blue and true green 2005-01-20 2 new brightness grouping for amber 2005-07-12 2, 5, 7 ordering code (wavelength group 6 for blue added) 2007-10-05 all not for new designs 2009-10-14 all OS-PD-2010-006 2010-03-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 21 may only be used in life-support devices or systems10) page 21 with the express written approval of OSRAM OS. 2010-03-16 20 LATB T66B Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 3) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) 4) Farbkoordinaten werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 5) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 6) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur amber 8) Mae werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 10) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 7) 8) 9) 10) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2010-03-16 21 Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) Chromaticity Coordinate Groups are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for amber Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.