Specification Date : Aug. 26, 08 TO : Digi-Key Approved by Selling agency KYOCERA Corporation (Electronic Components Sales Division) 7612-8501 6 Takeda Tobadono-cho, Fushimi-ku Kyoto 612-8501 TEL 075-604-3500, FAX 075-604-3501 Manufacturer KYOCERA KINSEKI Corporation 7201-8648 1-8-1 IzumiHoncho Komae-shi, Tokyo 201-8648 TEL 03-5497-3111, FAX 03-5497-3209 Let us Submit 1Copy of the approved Specification on the below items. Product Crystal Oscillator Model KT2520F27456ZAW28TBA ( RoHS Compliant ) Frequency 27 456MHz Specification No. | ~----------------------------- Customer Parts NO. | w-nx=-s-asnwsstuntusetsnstnunsesenmanntenee Engineering Issued by Approved by Drawing No. KYOCERA KINSEKI Yamagata Corporation Crystal Oscillator Manufacturing Department N. Nakano Y. Kakuta K1101-08334-581 Crystal Oscillator Engineering section | A y \ Vi AAahowd |Z Xe bet | Management JKYOCERA KINSEKI Yamagata Corporation Crystal Oscillator Engineering section in charge : Yoshihiro Kakuta *Recycled paper is being used for the conservation of nature. KYOCERA KINSEKI Corporation KBSK-5110CRevision History Revision Contentand reason 1 Aug 26,08 ODocument not based on Digi-Key Specification. O The first edition. a were KYOCERA KINSEKI Corporation Dwg. Date 8/26/2008 Dwg. K1101-08334-581-1/121. Purpose and scope 2. Nominal condition This document contains specification related to CRYSTAL OSCILLATOR model KT2520F27456ZAW28TBA for Digi-Key. Item MIN TYP. MAX Unit Conditions 1 Operating temperature range -40 _ +85 deg.C 2 Storage temperature range -A0 _ 485 deg.C 3 | Nominal frequency _. 27.456 _ MHz 4 | Supply voltage Range 23 _ 3.6 Vv Supply voltage Vect5% Vv (@XDo not exceed the range ofthe power-supply voltage.) 5 | Load impedance 9 10 11 kQ 9 10 11 pF 6 | Output signal condition Clipped ~ sine 3. Electrical characteristics Ta= -40 deg.C to +85 deg.C, Vec=2.8V, Vcon=GND , Load 10kO//10pF Item MIN. TYP. MAX Unit Conditions Remarks 1 | Temp characteristics 6 -0.5 --- +0.5 x10 -30 deg.C to +85 deg.C On the basis of 25 degC frequency -5.0 _ +5.0 xi0* -40 deg.C to -30 deg.C 2 | Voltage characteristics Vec+5% -0.2 --- +0.2 x10 (3% Do not exceed the range of the power-supply voltage) 3 | Load characteristics 5 -0.2 _- +0.2 x10 10kO//10pF+/-10% 4 | Aging characteristics 8 -1.0 -- +1.0 x10/Y tyear at 25+/-2 deg.C 5 | Frequency tolerance . -2.0 --- +2.0 x10" After 2 times reflow soldering at 25+/-2 deg.C 6 | Current a+ - 1.5 mA 7 | Output voltage P 9 0.8 _- -- Vp-p 8 | Harmonics -- --- -8.0 dBc KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-2/12 KBSK-51104, Circuit 4 Bypass Capacitor and DC-Blocking Capacitor do not build in this TCXO. So, Bypass Capacitor and DC-Blocking Capacitor are attached outside and please use it. 2 And these Capacitor should be placed as close as possible to the pin(No.4 and No.6). 5. Test circuit Vcc ; OUT *4:0.01UF 7 N.C *4:0.01UF 6 5 4 TCXO top view 1 2 3 N.C GND il *Load 10kQ//10pF contains The interna! impedance of FET probe. Co FET Power 8 4 PROBE | Supply (v) Spectrum Analyzer Vee 4 3 RL--L & Counter e | | @ KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-3/12 KBSK-53326. Environment mechanical characteristics Item Conditions Specifications High temperature storage Ta=+85deg.c, judge on 240H storage Low temperature storage Ta=-40deg.c, judge on 240H storage High temperature and High Humidity storage Ta=+85deg.c, RH=85%RH, judge on 240H storage Temperature Cycle test Ta=-40deg.c to =+85deg.c 30min. Each 10 cycle Drop test A test piece (100g) made by Teflon is dropped 3 cycles (1cycle: 6 direction) from the height of 150cm hard board Vibration test 10 to 55 to 10Hz 1.5mm constant amplitude 1min. Period X, Y, Z direction 2H each 6H total. Solder heat test All leads shall be soldered at temperature of 350+ 5 deg.c for 31 sec. using a soldering iron. Lead soilderbility Dip each of lead into 2305 deg.c solder pod for 5+0.5 sec. after close , the test area of loads surfaces must be covered loads 90% by solder. Reflow soldering Reflow solderling at 2 times. It must be met to the characteristics Judging criterion. Measurement shall be taken at room ambient within 2 to 24hours after each test. Normal Condition : Temperature 25 deg.C+/-2deg.C Judge Humidity 30 % to 70 % Item Standard At 25 deg.C frequency +/-2.0 x 10max. (Before and After) KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-4/12 KBSK-53327. Reflow profie 7-1.Preheat : 180+0/-10deg.C, 120sex(max) 7-2.Peak Temperature :260+0/-10deg.C, 10sec(max) 7-3.PC-Board Material : FR-4 Size > 140mmx110mm Thickness : t=0.8mm 7-4.Condition of Measurement Temperature: Surface of PC-BOARD 7-5.Soldering : 2 times Temp.(deg.C) 300 Soldering Zone 260 +0/-10deg.C __ 10sec max 250 | qj 230deg.C 200 Pre Heating Zone 40sec max 5 180+0/-10deg.C 150 am 120sec max 100 50 4 normal temperature 0 Heating Time(sec) KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-5/12 KBSK-53328. Marking contents \ *Laser Marking ( > HHH # Crystal Serial No. (Crystal Date) 30801 _, Contents Example {1 || KYOCERA Marking (Pin-1 identifier) RK 2 || Control Code 30 3 || Lot No. 801 *The 2008 1st week 802 *The 2008 2nd week 4 | Production place No marking (KYOCERA KINSEKI Yamagata Corporation ) O (KYOCERA KINSEK! Corporation Kagoshima Kokubu Plant ) KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-6/12 KBSK-53329. Dimensions _ 2,500.15 _ #6 #5 #4 ] \ 2 So +H 5 N | i #1 #2 #3 Top View Sf { 1 x E ~ | \ _ 1 I Mo+Ni(1.27 to 8.89 1 m),Au(0.3 to 1.0 um) Side View #1 #2 #3 ae 1, 5 _1 | A PIN Layout - < #1 GND | _ #3 GND | Aw #4 OUTPUT 3 #6 Vcc #25 N.C. #6 #5 #4 ple ple 4 Unit: mm 0.35 065 05 065 0.35 Terminal Coplanarity: 0.1mm max. Bottom View Land pattem Re fe rence) #6 #5 #4 ZY Z, UY I W LZ N Vs VY 4 v he yo A, , : Ui, 2 , Ui Y S Zs , y #1 #2 #3 0.55), 0.7 ,|,0.55 , 0-50 | 1.80 | 0.50 KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-7/12 KBSK-533210.Tape & Reel 10-1.Tape dimensions #1pinMark _,H A F J a Feeding Direction 10-1-1.CarrierTape: PS Included Carbon 10-1-2.Circle hole is designed on right side against the direction of feed. Unit: mm Symbol A B C D E Dimension 2.40+/-0.05 2.90+/-0.05 8.00+/-0.2 3.50+/-0.05 1.75+/-0.1 Symbol F G H | J Dimension 4.00+/-0.1 2.00+/-0.05 4,00+/-0.1 61.5+0.1/-0 1.0+0.1/-0 Symbol K t Dimension 1.10+/-0.05 0.25+/-0.05 10-2.Reels dimensions N a g 8 o_o 2.0/0.5 : = | per) SS tp Aceiall = 9.040 3/-0 Unit: mm 10-2-1.Reel: PS Included Carbon 10-2-2.Reel unit: 3000pcs max. / iReel KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-8/12 KBSK-533210-3.Packing 10-3-1.Trailer & Leader As for the trailer and leader of taping, there are empty pockets as following drawing. Sprocket hole is designed on upper side against the direction of feed. Trailer section : 40pokets min. Component section Leader section : 400~560mm (See enlargement underneath) fooooooooo0oo0oogoogooooo oo 0 Ol Component section Empty carrier tape : 100 to 200mm Top cover tape only Sealed with top cover tape v Vv A Vv Leader section : 400 to 560mm 10-4. Shipping label Following item shall be listed on reel, tape, bag and outer box. "Parts no, Lot no, Quantity, Date of manufacture, Customers name KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-9/12 KBSK-533211. Tape breaking and peeling force 11-1. Angle: 165 deg to 180 deg 11-2. Tape Break Force: 10N min 11-3. Top Cover Tape Strength: 10N min 11-4. Top Cover Tape Peel Force: 0.1 to 1.0N 11-5. Top Cover Tape Peel Speed: 300+/-10mm / minutes Top cover tape 165deg to 180deg Direction of feed PROTICICITICLIC IL Direction of feed Bottom cover tape KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-10/12 KBSK-533212. Notice 12-1. Please use soldering iron and the spot heater within the range of a solder heat test condition. 12-2. Units should be stored in a dry environment keeping away from the sun. 12-3. Don't leave units in high-Temperature and high-humidity environment due to terminal solderability. (Please keep 0 deg.C to 40 deg.C and 30% to 70%RH for recommendable storage condition) 12-4. The term of a guarantee of taping packing is 6 months. (0 deg.C to 40 deg.C,RH30% to 70%) After aluminum pack opening. Since there is fear of solderability and product moisture absorption. Please use it within 168 hours (Please check solderability if you use units after 168 hours with unpacking.) 12-5. Disapprove of washing. 12-6. Unless we receive request for modification within 1 month from the issue date of this KKC specification sheet, we will supply products according to this specification. Also, if you'd like to modify specification of order, which has been placed with delivery within 1 month from the issue data of this specification sheet, we would like to discuss with you separately. 12-7. If you intend to use products listed on this specification for applications that may result in loss of life or assets (controls relating to safety, medical equipment, aeronautical equipment, space equipment, etc.), please do not fail to advise us of your intention beforehand. 12-8. In no event shall the company be liable for any product failure resulting from an inappropriate Handling or operation of the product beyond the scope of its guarantee. 42-9. Information contained in this specification must not be quoted, reproduced or used for other purposes including processing either in part or in full without obtaining prior approval from the company. KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-11/12 KBSK-533213. Production place This product is produced in KYOCERA KINSEKI Yamagata Corporation and the KYOCERA KINSEKI Corporation Kagoshima Kokubu Plant. 14. Parts Numbering Guide KT2520F 27456 ZAW 28T BA A B CDE F GH A. Series (2.5x2.0 SMD KT2520F) B. Frequency (27.456MHz) C. Frequency temperature accuracy (Z : Special specification ) D. Minimum temperature range ( A:-40degC) E. Maximum temperature range (W :+85degC) F. Supply voltage (28 : 2.8V) G. Control voltage stability (T : TCXO) H. Customer special model Suffix KYOCERA KINSEKI Corporation Dwg No K1101-08334-581-12/12 KBSK-5332