XAA170 Dual Single-Pole, Normally Open OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max RON Input Control Current Rating 350 100 50 5 Description Units VP mA XAA170 is a dual normally open (1-Form-A) solid state relay with two independent, optically coupled relays in a single 8-pin package. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing a 3750Vrms input-to-output isolation barrier. Control of the isolated output is accomplished by means of a highly effective GaAlAs infrared LED at the input. mA Features * 3750Vrms Input/Output Isolation * Small 8-Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available By incorporating two independent single-pole relays into a single 8-pin package, the XAA170 saves board space by providing a more compact design solution than two discrete single-pole relays in a variety of applications. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Compliant Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # Description XAA170 XAA170P XAA170PTR XAA170S XAA170STR 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack T&R (1000/Reel) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount T&R (1000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-XAA170-R04 toff e3 www.clare.com 1 XAA170 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Ratings 350 5 50 1 150 800 Units VP V mA A mW mW Isolation Voltage, Input to Output Operational Temperature Storage Temperature 3750 -40 to +85 -40 to +125 Vrms C C 1 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C 2 Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance Input to Output 2 Conditions Symbol Min Typ Max Units t=10ms IL=100mA VL=350VP IL ILPK RON ILEAK - 33 - 100 350 50 1 mA mA VL=50V, f=1MHz ton toff COUT - 25 5 5 - IL = 100mA - IF - 0.4 0.7 5 - mA mA IF = 5mA VR = 5V VF IR 0.9 - 1.2 - 1.4 10 V A - - - 3 - pF IF = 5mA, VL = 10V www.clare.com A ms pF R04 XAA170 PERFORMANCE DATA* 25 15 10 5 0 10 5 0.83 0.91 0.99 Turn-On (ms) 1.06 0.11 Device Count (N) 15 10 5 0 0.17 0.19 0.22 Turn-Off (ms) 0.25 0.50 0.56 0.62 0.69 0.75 LED Current (mA) 35 Turn-On (ms) 25 20 15 10 5 0 1.17 25 10 5 0 Typical LED Forward Voltage Drop vs. Temperature 1.8 1.8 0.50 0.56 0.62 0.69 0.75 1.2 1.0 Typical Turn-On vs. LED Forward Current (IL=100mADC) Typical Turn-Off vs. LED Forward Current (IL=100mADC) 5 10 15 20 25 30 35 40 45 0 50 0 20 40 60 80 Temperature (C) 100 120 10 15 20 25 30 35 40 45 Typical Turn-On vs. Temperature (IL=100mADC) Typical Turn-Off vs. Temperature (IF=5mA, IL=120mADC) IF=5mA 1.2 1.0 IF=10mA 0.8 IF=20mA 0.6 -40 5 LED Forward Current (mA) 0 -20 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 LED Forward Current (mA) 0.2 -40 5 Blocking Voltage (VP) 0.4 0.8 10 424.0 429.3 434.5 439.7 444.9 450.1 455.4 -20 0 20 40 60 80 Temperature (OC) 100 120 Turn-Off (ms) Turn-On (ms) IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 15 0.81 1.4 1.4 20 LED Current (mA) 1.6 1.6 Typical Blocking Voltage Distribution (N=50, TA=25C) 0 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 5 On-Resistance () 15 0.44 30 10 29.09 29.86 30.63 31.40 32.16 32.93 33.70 20 0.81 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 15 0.28 0 0.44 LED Forward Voltage Drop (V) 0.14 Typical IF for Switch Dropout (N=50, IL=100mADC, TA=25C) 25 20 20 0 1.14 Device Count (N) 0.75 Typical IF for Switch Operation (N=50, IL=100mADC, TA=25C) 25 Device Count (N) 15 0 0.67 Device Count (N) 20 Typical On-Resistance Distribution (N=50, IL=100mADC, TA=25C) 25 Device Count (N) Device Count (N) Device Count (N) 20 Typical Turn-Off Time (N=50, IF=5mA, IL=100mADC, TA=25C) Turn-Off (ms) 25 Typical Turn-On Time (N=50, IF=5mA, IL=100mADC, TA=25C) 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 50 120 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R04 www.clare.com 3 XAA170 PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=100mADC) 6 6 2 4 3 2 1 1 0 0 0 20 40 60 80 100 120 -20 0 20 40 60 80 -3 Temperature (OC) Temperature (OC) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Typical Load Current vs. Temperature -2 -1 0 1 2 3 10 -40 450 120 100 80 IF=10mA IF=5mA IF=2mA 60 40 0 20 40 60 80 0 435 430 425 100 120 -40 -20 0 Load Current (A) 0.014 0.012 0.010 0.008 0.006 0.004 0.002 20 40 60 Temperature (OC) 80 20 40 60 80 100 Temperature (C) Energy Rating Curve 0.016 0 100 120 440 Temperature (C) -20 20 40 60 80 Temperature (OC) 445 420 -20 -20 Typical Blocking Voltage vs. Temperature 455 Typical Leakage vs. Temperature Measured Across Pins 4&6 Leakage (A) 20 140 Load Voltage (V) 0 -40 30 160 0 -40 4 40 100 120 20 -4 50 0 -40 Load Current (mA) -20 On-Resistance () 3 -40 Load Current (mA) 60 Blocking Voltage (VP) 4 Typical On-Resistance vs. Temperature (IF=5mA, IL=100mADC) 70 5 LED Current (mA) LED Current (mA) 5 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 Typical IF for Switch Dropout vs. Temperature (IL=100mADC) 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R04 XAA170 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating XAA170 / XAA170S / XAA170P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time XAA170 / XAA170S 250C for 30 seconds XAA170P 260C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine-based or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R04 RoHS 2002/95/EC e3 www.clare.com 5 XAA170 MECHANICAL DIMENSIONS XAA170 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) PCB Hole Pattern 7.620 0.254 (0.300 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 TYP (0.01) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.889 0.102 (0.035 0.004) XAA170S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.120 (0.032 0.004) XAA170P 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.clare.com R04 XAA170 MECHANICAL DIMENSIONS XAA170S Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) K1 =4.20 (0.165) Embossed Carrier Embossment P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 XAA170P Tape & Reel 330.2 DIA. (13.00 DIA.) W = 16.00 (0.63) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier Embossment P = 12.00 (0.472) User Direction of Feed Ao = 10.30 (0.406) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-XAA170-R04 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/20/2010