ASTXR-12-26.000MHz-511911
APPLICATIONS:FEATURES:
OVERVIEW:
• Excellent phase noise performance
• Low power consumption
• Miniature size: 2.5 x 2.0 x 0.8mm SMD
• RoHS compliant
• Temperature stability: ±0.5ppm over -40 ~ +85°C
30332
Esperanza, Rancho Santa Margarita,
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 07.11.14
Visit www.abracon.com for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
SMD TCXO
Moisture Sensitivity Level (MSL) – 1
Pb
RoHS / RoHS II Compliant
• GPS
• Smartphone
• PND
• Communications
• Consumer electronics
• Wi-Fi
• WiMAX/W-LAN
STANDARD SPECIFICATIONS:
Abracon’s ASTXR series of Temperature Compensated Crystal Oscillators are based on an Advanced-Analog Temperature Compensation
Integrated Circuit, incorporated with Rakon’s Precision TCXO processing techniques.
This composite enables exceptional frequency stability over temperature (≤±0.50 ppm over -40°C to +85°C). Additionally, high-resolution
screening algorithms are employed during the production verification process, ensuring that 100% of these devices are fully compliant to the
stringent frequency stability specifications.
For Power Sensitive applications, the ASTXR series provides the ability to preserve consumed power by placing the device in shut-down mode;
when not used. This series of devices are ideally suited for GPS and other mobile applications where performance, size, cost and power
management are of critical importance.
ESD Sensitive 2.5 x 2.0 x 0.8mm SMD
Parameters Minimum Typical Maximum Units Notes
zHM 000.62 ycneuqerF lanimoN
Supply Voltage (Vdd) 1.75 1.88 2.0 V
Current Consumption (@Vdd max) 1.5 mA See Note 2
Operable Temperature Range -40 +85 º C
Storage Temperature Range -40 +85 º C
Initial Frequency Tolerance
@+2C at time of shipment ±1 ppm
mpp 1± tfihS wolfeR After 2 consecutive reflows
and 1hr recovery@+2C
Frequency Stability over Operating
Temperature Range ±0.5 ppm Ref. to (FMAX+FMIN)/2.
See Note 1
Frequency Slope
(tested to a minimum of 1 freq. reading
every 2°C over -30°C to +85°C)
0.1 ppm/°C See Note 1
Frequency Slope
(tested to a minimum of 1 freq. reading
every 2°C over -40°C to -30°)
0.5 ppm/°C See Note 1
Static Temperature Hysteresis
(Frequency change after reciprocal
temperature ramped over the operating
range. Frequency measured before and
after at +25°C)
0.6 ppm
Sensitivity vs. Supply Voltage
Variations (Vdd±5% @ +2C) ±0.1 ppm
Sensitivity vs. Load Variations (±10%
load change @ +2C) ±0.2 ppm See Note 2
Long Term Stability (frequency drift
over 1 year @ +2C) ±3 ppm
evaw-eniS deppilC delpuoC CD epyT tuptuO See Note 3
Output Voltage Level
(@ minimum Vdd) 0.8 V See Note 2
Output Load Resistance 9 10 11 k
Output Load Capacitance 9 10 11 pF
Startup Time (amplitude) 0.5 ms Within 90% of specified
output level
Startup Time (frequency) 1.5 ms Within ±0.5ppm of steady
state frequency
California
92688
ASTXR-12-26.000MHz-511911
30332
Esperanza, Rancho Santa Margarita,
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 07.11.14
Visit www.abracon.com for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Pb
RoHS / RoHS II Compliant
PART IDENTIFICATIONS:
2.5 x 2.0 x 0.8mm SMD
Note:
1. Parts should be shielded from drafts causing unexpected thermal gradients. Temperature changes due to ambient
air currents on the oscillator can lead to short term frequency drift
2. Specified for load stated in the Oscillator Output section at +25°C
3. AC-Coupled outputs require an external capacitor, 1nF recommended
4. Frequency shift ≤1ppm after reliability test conditions (see section 7.0)
Parameters Minimum Typical Maximum Units Notes
Enable/Disable Function (Pin 1)
Input Voltage High (VIH) 80%*Vdd Vdd V Normal operating Mode
Input Voltage Low (VIL) GND 20%*Vdd V Power Down Mode
Stand-by Current <0.01 1 µA
Enable Time (amplitude) 0.5 ms Within 90% of specified
output level
Enable Time (frequency) 1.5 ms Within ±0.5ppm of steady
state frequency
Phase Noise @ 26MHz Carrier
(@+25°C)
@ 1 Hz offset -64 dBc / Hz
@ 10 Hz offset -93 dBc / Hz
@ 100 Hz offset -115 dBc / Hz
@ 1,000 Hz offset -135 dBc / Hz
@ 10,000 Hz offset -149 dBc / Hz
@ 100,000 Hz offset -150 dBc / Hz
ASTXR-12-26.000MHZ-511911 is equivalent to Rakon P/N 511911.
ASTXR-12-26.000MHz -511911 -
Packing
Blank: Bulk
T: Tape & Reel (3k/reel)
California
92688
SMD TCXO
CROSS REFERENCE INFORMATION:
ASTXR-12-26.000MHz-511911
30332
Esperanza, Rancho Santa Margarita,
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 07.11.14
Visit www.abracon.com for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Pb
RoHS / RoHS II Compliant
Recommended Land Pattern
Dimensions: mm
OUTLINE DIMENSION:
REFLOW PROFILE:
2.5 x 2.0 x 0.8mm SMD
Pin Function
1 Enable/Disable
2 NC/GND
3 GND
4 Output
5 NC/GND
6 Vdd
California
92688
SMD TCXO
ASTXR-12-26.000MHz-511911
30332
Esperanza, Rancho Santa Margarita,
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 07.11.14
Visit www.abracon.com for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Pb
RoHS / RoHS II Compliant 2.5 x 2.0 x 0.8mm SMD
TAPE & REEL:
3000pcs/reel
Dimensions: mm
ATTENTION: Abracon Corporations products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive
Applications. Abracons products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high
reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environ-
ment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
California
92688
SMD TCXO