NetComm
Wireless
PRODUCT DATASHEET
NetCommWireless
Light Industrial
M2M Router Plus
NWL-15-02
Perfect for
Point-to-point or point-to-multipoint
machine-to-machine IP connectivity
Controlling and monitoring of
connected machines from
remote locations
Collection and analysis of data from
connected machines
Commercial and Industrial
deployments in harsh environments
KEY FEATURES
Dual-band CDMA (BC0/BC1), 800/1900MHz
CDMA data speeds up to 3.1 Mbps DL
1 X10/100 Ethernet port
RS232/RS485/RS422 Port and USB 2.0 OTG port
Built in GPS supporting an active GPS Antenna via external SMA connector
Three multi-puropse I/O ports
One dedicated Ignition Input
Intelligent, Tri-Colour LED display for clear, easy to read modem status information
Extensive device management with support for TR-069, Web GUI and full feature
management with SMS
OptimizedwebcongurationUI
Flexible mounting suitable for in-home use or industrial applications with built-in
wall mount, and DIN rail mounting options
PRODUCT DATASHEET
NetCommWireless
Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specications are subject to change without notice. Images shown may vary slightly from the actual product.
NETCOMM WIRELESS LIMITED
Head Ofce - 18-20 Orion Road, Lane Cove,
NSW 2066,
Sydney, Australia ABN 85 002 490 486
E: sales@netcommwireless.com
NetComm
Wireless
www.netcommwireless.com
PROCESSOR & STORAGE
Powerful 450Mhz ARM9 processor with 64MByte DDR2 Ram
256MByte Flash memory storage (~120MB available on board
space for user storage)
OPERATING SYSTEM
Embedded Linux 3.6
DATA R ATES
EV-DO Rev.A data rates: FL max. 3.1Mbps, RL max. 1.8Mbps
1xRTT Advanced data rates: FL max. 307.2kbps, RL max.
3 07.2 k bp s
CELLULAR BANDS
CDMA (BC0/BC1), 800/1900MHz
CONNECTIVITY
• 1x (RJ-45) 10/100Base-TX Port with Auto MDIX
• 1x RS232 Serial Port DB-9 female DCE supporting either 9 wire
RS232 or RS422 (software selectable)
• Software controlled termination resistors for RS485
• Mini USB 2.0 OTG interface with 0.5A supply capability
• 3x Multipurpose I/O pins
I/O PINS
• NAMUR (EN 60947-5-6 / IEC 60947-5-6) compatible sensor input
• Analogue 0V to 30V input
• Digital input (through measurement of voltage above/below
threshold)
• Open collector output
RESET BUTTON
Reset button (recessed, requiring pen/paperclip) with three
functions: Reboot, reboot into recovery mode, and reset unit to
factory defaults
ANTENNA CONNECTORS
2x SMA connectors for 2G/3G (1x Main and 1x RX Diversity)
1x SMA connector for GPS
LED INDICATORS
7x tri-colour LEDs. Power, Network and 5x Signal Strength indicators
Easy and clear LED status display for connection status, connected
network type, and connection errors
CELLULAR
• NAT Disableforframedrouteconguration
• Transparent bridge mode using PPPoE to allow the router to
transparently forward Public WAN IP address to a downstream device
NETWORK & ROUTING
Static Routing, RIP (v1/v2), Port Forwarding and DMZ
Dynamic DNS
VRRP for redundant router failover
DHCP Server, including :
o Address reservation by MAC address
o CustomDNSserverdenitions
o DHCP Relay
o DHCP list display in Web-UI
o AdvancedDHCPOptionconguration(Option42NTP,Option
66 TFTP, Option 150, Option 160)
• Data Stream Manager providing ability to create mappings between
input and output ports (e.g. Serial Port, SMS, GPS, USB) and
perform required translation or data processing by each virtual
tunnel
• Modbus Server TCP/IP Gateway and Client TCP/IP Agent with up to
247 slaves connected to the Serial TCP/IP Gateway
• Modbus RTU/ASCII frames support
GPS
Embedded GPS receiver (1575.42Mhz)
• SMA Connector for external active GPS Antenna
Active antenna voltage: 3.05V
Maximum current: 50mA
Short circuit protection
Tracking sensitivity under open sky: -159dBm
Acquisition sensitivity under open sky: -149dBm
Cold start sensitivity: -145dBm
• Time torstx(TTFF):Cold25s,Warm10s,Hot3s
• Supports NMEA-0183 (v2.3)
Redirect NMEA stream to serial for forward over IP
Odometer reading available via Web-UI, CLI and SDK
VPN
PPTP Client for VPN connectivity to remote PPTP VPN Server
IPSec tunnel termination (for up to 5 tunnels)
GRE Tunnelling
OpenVPN (Client, Server and P2P)
ADMINISTRATION & CONFIGURATION
Web-based User Interface (HTTP/HTTPS) for full device status and
conguration
Passwordprotectedcongurationlebackupandrestoreforquick
devicecongurationanddevicecloning
• Telnet/SSH Command Line Interface for status monitoring,
congurationandcontrol
SNMPv1/v2includingcellularspecicMIB,congandrmware
download
TR-069Clientforremotedeviceconguration,conguration
backupandrestore,andrmwareupgrade
SMS Client (Send/Receive) including inbox, outbox
Ping monitor watchdog (Reset connection on repeated ping failure)
Diagnostic Log Viewer (remote and local)
System Status and Security Logs
NTP Server Support for network time sync of device’s system clock
Device User Guide stored on the device and accessible via the
Web-based User Interface (HTTP/HTTPS)
Advanced Diagnostics and Control via SMS
o Query status information – such as Signal Strength, WAN IP,
Uptime, and many more
o ConguredeviceremotelyviaSMS–suchasAPN,
authentication settings, and many more
o Execute commands via SMS – such as reboot, reset to
defaults,goofine,andmanymore
o Secure SMS management using sender whitelisting and
password management
o SMS acknowledgement replies for queries and commands
FIRMWARE MANAGEMENT
Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/
HTTPS, SNMP, TR-069)
Multiplermwareimagestorageondeviceanddynamicinstall
TriggeredrmwareupgradeviaSMS(initiatedownload&install
from HTTP/HTTPS)
SOFTWARE DEVELOPMENT KIT
Develop and install custom software applications
Open Linux standard development environment
Develop applications/scripting in standard ANSI C/Shell script
and LUA
Package manager built into Web-UI for Application installation/
removal
API (C, LUA and Shell libraries) to the unit’s internal Runtime
Databasetoallowfullstatusmonitoringcongurationandcontrolof
the device from custom applications
TEMPERATURE
Operating Temperature Range: -40°C ~ +80°C
Storage Temperature Range: -40°C ~ +85°C
POWER SUPPLY
• DC Power input via 6 way connector (8 - 40V DC)
• 1x Dedicated ignition input on 6 way connector
• Power consumption 6W, recommended DC supply via terminal block
(12V 1.5A )
• Field terminable power input via screw type terminal block included
• 60v load dump protection on DC Input Jack
DIMENSIONS & WEIGHT
• Device dimensions (excluding external antenna): 140mm (L) x
103mm (W) x 30mm (D) / 180g
MOUNTING OPTIONS
• Wall mount support in multiple orientations via embedded mounting
holes
• DIN Rail mount support via plastic bracket included in box (Top hat
section rail TH 35 IEC60715)
REGULATORY COMPLIANCY
• FCC, ISO7637
The NWL-15 router is a high performing dual band CDMA
Router that delivers the high speed and wide coverage
afforded by Verizon’s CDMA network. Designed for plug and
play Ethernet IP connectivity, its lightweight, compact design
makes it suitable for a broad range of industry applications. The
device incorporates state-of-the-art M2M features; a powerful
external antenna with an additional antenna providing diversity
assistance;exiblemountingoptionsandawideoperating
temperature range. The device enables you to remotely connect
your assets, premises or equipment to gather real-time business
insight and streamline your business operations. The router’s
open Linux operating system and Software Development Kit
(SDK) offers the capability to install custom software applications
withinthesubstantialonboardashmemory.Thedevicealso
allows remote system monitoring, remote diagnostics, remote
congurationandrmwareupdatesovertheair.Featuring
Ethernet, Serial (RS232/422/485), and USB 2.0 connectivity, the
NWL-15 router can interface with a diverse range of equipment
used in a wide variety of vertical applications. The NWL-15
router also features built in GPS support and a dedicated
ignition input making it ideal for vehicle applications. The device
features multipurpose digital and analogue I/O ports and is
compatible with the NetComm Wireless Software Development
Kit allowing you to customize their functionality to your needs.
Light Industrial M2M Router Plus
SPECIFICATIONS
APPLICATION EXAMPLES
Cellular Tower
Vending machine
Server
Internet
CCTV
Remote Location