GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 30 A 120 VAC Res.
Operate Time 15 msec max. at nominal coil voltage
Release Time 10 msec max. at nominal coil voltage
(without suppression)
Dielectric Strength 1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
4000 Vrms contact to coil (“T” version)
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC
50% RH
Dropout DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
Ambient Temperature
Operating -55°C (-67°F) to 85°C (185°F)
Storage -55°C (-67°F) to 155°C (311°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C., Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 36 grams
AZ2270
7/23/09
30 AMP MINIATURE
POWER RELAY
FEATURES
•Quick-connect leads for contacts
•1 Form A, B and C contacts available
•AC and DC coils available
•High dielectric strength version available
•Epoxy sealed versions available
•UL Class F (155°C) standard
•UL, CUR file E44211
•VDE 40027037 ( DC coil only )
COIL
Power
At Pickup Voltage DC: 500 mW
(typical) AC: 1.4 VA
Max. Continuous DC: 1.7 W at 20°C
Dissipation AC: 2.7 VA at 20°C
Max. Temperature 155°C (311°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
CONTACTS
Arrangement SPST (1 Form A, or B)
SPDT (1 Form C)
Ratings Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A (Form A)
15 A (Form B)
Max. switched voltage: 277 VAC, 28 VDC
UL, CUR 1 Form A
30 A at 277 VAC, General Use [1][2]
2 Hp at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
30 A at 28 VDC [1]
20/60 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form B
15 A at 277 VAC, General Use [1]
10 A at 28 VDC [1]
0.5 HP at 250 VAC [1]
0.25 HP at 125 VAC [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form C
30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2]
20/10 A (N.O./N.C.) at 28 VDC[1]
2/0.5 HP (N.O./N.C.) at 250 VAC[1][2]
1/0.25 HP (N.O./N.C.) at 125 VAC[1][2]
20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1]
VDE Contact factory for ratings
Material Silver cadmium oxide [1], silver tin oxide [2]
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)