09/2008
ACA0861 - A, B, C, D
750/860 MHz CATV Line Amplier
MMIC
Data Sheet - Rev 2.3
PRODUCT DESCRIPTION
The ACA0861 family of surface mount monolithic
GaAs RF Linear Ampliers has been developed to
replace, in new designs, the standard CATV Hybrid
amplifiers currently in use. The MMICs consist
of two parallel amplifiers, each with 12 dB gain.
The Ampliers are optimized for exceptionally low
distortion and noise gure while providing at gain
and excellent input and output return loss. There
are four differently specied ampliers available: two
input stages and two output stages. The ACA0861A
and the ACA0861C are input stages and are
specied at +34 dBmV at output. The ACA0861B
and ACA0861D are output stages and are specied at
+44 dBmV at output. A Hybrid equivalent is formed
when one input stage ACA0861 is cascaded with an
ACA0861 output stage between two transmission
line baluns. For low gain applications a single
ACA0861 can be used between baluns, for higher
gain applications more than two ACA0861 can
be cascaded between baluns. See ACA0861
application note for more information.
FEATURES
Flat Gain
Very Low Distortion
Excellent Input/Output Match
Low DC Power Consumption
Good RF Stability with High VSWR Load
Conditions
Surface Mount Package Compatible with
Automatic Assembly
Low Cost
Repeatability of Monolithic Fabrication
Meets Cenelec Standard
RoHS-Compliant Package Options
S7 Package
16 Pin Wide Body SOIC
with Heat Slug
Figure 1: Hybrid Application Diagram
RF Input
12dB
12dB
ACA0861A/C
12dB
12dB
ACA0861B/D
RF Output
2Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
Figure 2: Pin Out
Table 1: Pin Description
Input Stages
The ACA0861A and the ACA0861C are designed
as input stages and are specied at +34 dBmV at
output. These parts can be used alone for low gain,
low output level applications or can be cascaded with
one of the ACA0861 output stages for higher gain
and output signal drive level. The ACA0861A is a low
power dissipation part designed to drive the ACA0861B
output stage. The ACA0861C is a slightly higher power
dissipation part and provides the needed distortion
parameters to drive the ACA0861D output stage.
Output Stages
The ACA0861B and ACA0861D are designed as
output stages and are specied at +44 dBmV at
output. These parts can be used alone for low gain,
high output level applications or can be cascaded with
one of the ACA0861 input stages for higher gain. The
ACA0861B is a low power dissipation part designed
as the output stage with an ACA0861A input stage.
The ACA0861D is a higher power dissipation part
designed as the output stage with an ACA0861C
input stage. Cascaded, an ACA0861A and ACA0861B
provide exceptional push-pull hybrid equivalent
performance; an ACA0861C and an ACA0861D
cascaded provide exceptional power doubling hybrid
equivalent performance.
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
GND GND
IADJ
RFINA
GND
GND GND
RFOUTA
VB
N/C
GND
RFINB
GND
GND
RFOUTB
VA
PIN NAME DESCRIPTION PIN NAME DESCRIPTION
1GND Ground 9GND Ground
2N/C No Connection 10 V
B
Supply for Amplifier B
3RF
INA
Input to Amplifier A 11 RF
OUTB
Output from Amplifier B
4GND Ground 12 GND Ground
5GND Ground 13 GND Ground
6RF
INB
Input to Amplifier B 14 RF
OUTA
Output from Amplifier A
7 I
ADJ
Current Adjust 15 V
A
Supply for Amplifier A
8GND Ground 16 GND Ground
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
3
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specications.
Notes:
1. Pins 3 and 6 should be AC-coupled. No external DC bias should be
applied.
2. Pin 7 should be pulled to ground through a resistor or left open-circuited. No
external DC bias should be applied.
PARAMETER MIN MAX UNIT
Amplifier Supplies (pins 10, 11, 14, 15) 0+15 VDC
RF Input Power (pins 3, 6) -+70 dBmV
Storage Temperature -65 +150 °C
Soldering Temperature -+260 °C
Soldering Time -5.0 sec
PARAMETER MIN TYP MAX UNIT
RF Frequency 40 -860 MHz
Supply: VD (pins 10, 11, 14, 15) -+12 -VDC
Operating Temperature: TA-40 -+110 °C
4Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
Table 4: Electrical Specications
(TA = +25 °C, VD = +12 VDC)
Notes:
(1) Measured performance of MMIC alone. Balun effects de-imbedded from measurement.
(2) Measured with a balun on input and output of the device. See Figure 3 for test setup.
(3) All parts measured with 110 channel at input. Parts A and C measured at +34 dBmV output (per channel).
Parts B and D measured at +44 dBmV output (per channel).
(4) A xed resistor is needed for parts A through C; part D does not need an external resistor (see Table 6.)
These resistors set the devices’ current draw. Bias voltage is +12 VDC.
PARAMETER
ACA0861A ACA0861B ACA0861C ACA0861D
UNIT
MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX
Gain
(1)
11.4 11.9 12.4 11.5 12 12.5 11.5 12 12.5 11.6 12.1 12.6 dB
Gain
Flatness
(1)
- - +0.3 - - +0.3 - - +0.3 - - +0.3 dB
Noise Figure
(2)
- 3 5 - 3 5 - 3 5 - 3 6 dB
CTB
(2), (3)
77 Channels
110 Channels
128 Channels
-
-
-
-70
-68
-65
-
-64
-
-
-
-
-62
-60
-58
-
-57
-
-
-
-
-77
-75
-71
-
-68
-
-
-
-
-70
-68
-67
-
-66
-
dBc
CSO
(2),(3)
77 Channels
110 Channels
128 Channels
-
-
-
-71
-71
-70
-
-66
-
-
-
-
-66
-66
-64
-
-60
-
-
-
-
-75
-75
-73
-
-68
-
-
-
-
-72
-72
-70
-
-68
-
dBc
XMOD
(2),(3)
77 Channels
110 Channels
128 Channels
-
-
-
-67
-63
-59
-
-56
-
-
-
-
-62
-56
-55
-
-50
-
-
-
-
-74
-71
-67
-
-62
-
-
-
-
-71
-68
-66
-
-61
-
dBc
Supply
Current
(4)
-180 200 -310 330 -260 275 -450 490 mA
Cable
Equivalent
Slope
(1)
-0.5 -1.0 -0.5 -1.0 -0.5 -1.0 -0.5 -1.0 dB
Return Loss
(Input/Output)
(1)
18 22 -18 22 -18 22 -18 22 -dB
Thermal
Resistance
(
JC
)
--6.0 - - 6.0 - - 6.0 - - 6.0 C/W
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
5
Note: Apply voltage to both Vd lines simultaneously.
Figure 3: Test Circuit
Table 5: Parts List for Test Circuit
Table 6: R1 Resistor Value
Figure 4: Balun Drawing (4 Turns)
Notes:
(1) T1, T2 (balun) wind 4 turns thru core, as shown in Figure 4.
REF DESCRIPTION QTY VENDOR VENDOR PART NO.
C1, C2, C5, C6 0.01uF chip capacitor 4Murata GRM39X7R1103K25V
C3, C4 300pF chip capacitor 2Murata GRM39X7R301K25V
C7 47uF Electrolytic CAP 1Digi-Key Corp. P5275-ND
L1, L2 390nH air-wound chip inductor 2Coilcraft 1008CS-391
R1 (see Table 6) 1
T1, T2 (1)
ferrite core 2Philips TC3.4/1.8/1.3-3D3
wire MWS Wire industries B238611
TVS TVS, 12 Volt, 600 Watt 1Digi-Key Corp. SMBJ12ACCCT-ND
PART NUMBER R1 VALUE
ACA0861A 21.5 Ohms
ACA0861B 274 Ohms
ACA0861C 121 Ohms
ACA0861D (open)
7
6Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
PERFORMANCE DATA
ACA0861A and ACA0861B Cascade Typical Data (see Figure 42)
19.5
20.0
20.5
21.0
21.5
22.0
22.5
23.0
23.5
24.0
24.5
0 100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
S21 (dB)
-40°C
-20 °C
25 °C
45 °C
85 °C
100 °C
Figure 5: Gain/S21
Figure 6: Reverse Isolation/S12
-60.0
-50.0
-40.0
-30.0
-20.0
-10.0
0.0
0 100 200 300400 500 600 700 800 900 1000
Frequency (MHz)
S12 (dB)
-40 °C
-2C
25 °C
45 °C
85 °C
100 °C
Figure 7: Input Return Loss/S11
400
-45.0
-40.0
-35.0
-30.0
-25.0
-20.0
-15.0
-10.0
-5.0
0.0
5.0
0 100 200 300 500 600 700 800 900 1000
Frequency (MHz)
S11 (dB)
-40 °C
-20 °C
25 °C
45 °C
85 °C
100 °C
Figure 8: Noise Figure vs. Frequency
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0 200 400 600 800 1000
Frequency (MHz)
N F
(
d B
)
Figure 9: Output Return Loss/S22
-45.0
-40.0
-35.0
-30.0
-25.0
-20.0
-15.0
-10.0
-5.0
0.0
5.0
0 100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
S22 (dB)
-40 °C
-2C
25 °C
45 °C
85 °C
100 °C
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
7
ACA0861A and ACA0861B Cascade Typical Data (see Figure 42)
Figure 10: CTB (77 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600
Frequency (MHz)
CTB (dBc)
50
48
46
44
42
40
Output
Power
(dBmV)
Figure 11: CSO (77 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 100 200 300 400 500 600
Frequency (MHz)
CSO (dBc)
50
48
46
44
42
40
Output
Power
(dBmV)
Figure 12: XMOD (77 Channel Loading, Flat)
-70
-65
-60
-55
-50
-45
-40
-35
-30
0 100 200 300 400 500 600
Frequency (MHz)
Xmod (dBc)
50
48
46
44
42
40
Output
Power
(dBmV)
8Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
ACA0861A and ACA0861B Cascade Typical Data (see Figure 42)
Figure 13: CTB (110 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600 700 800
Frequency (MHz)
CTB (dBc)
48
46
44
42
40
Output
Power
(dBmV)
Figure 14: CSO (110 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 100 200300 400500 600700 800
Frequency(MHz)
CSO (dBc)
48
46
44
42
40
Output
Power
(dBmV)
Figure 15: XMOD (110 Channel Loading, Flat)
-70
-65
-60
-55
-50
-45
-40
-35
-30
0 100 200 300 400 500 600 700 800
Frequency (MHz)
Xmod (dBc)
48
46
44
42
40
Output
Power
(dBmV)
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
9
ACA0861A and ACA0861B Cascade Typical Data (see Figure 42)
Figure 16: CTB (128 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 200 400 600 800 1000
Frequency (MHz)
CTB (dBc)
48
46
44
42
40
Output
Power
(dBmV)
Figure 17: CSO (128 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 200 400 600 800 1000
Frequency (MHz)
CSO (dBc)
48
46
44
42
40
Output
Power
(dBmV)
Figure 18: XMOD (128 Channel Loading, Flat)
-70
-65
-60
-55
-50
-45
-40
-35
-30
0 200 400 600 800 1000
Frequency (MHz)
Xmod (dBc)
48
46
44
42
40
Output
Power
(dBmV)
10 Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
ACA0861C and ACA0861D Cascade Typical Data (see Figure 42)
Figure 19: Gain/S21
20.5
21.0
21.5
22.0
22.5
23.0
23.5
24.0
24.5
25.0
25.5
0 100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
S21 (dB)
-40 °C
-20 °C
25 °C
45 °C
85 °C
100 °C
Figure 20: Reverse Isolation/S12
-60.0
-50.0
-40.0
-30.0
-20.0
-10.0
0.0
0 100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
S12 (dB)
-40 °C
-2C
25 °C
45 °C
85 °C
100 °C
Figure 21: Input Return Loss/S11
-45.0
-40.0
-35.0
-30.0
-25.0
-20.0
-15.0
-10.0
-5.0
0.0
5.0
0 100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
S11 (dB)
-4C
-2C
25 °C
45 °C
85 °C
100 °C
Figure 22: Noise Figure vs. Frequency
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0 200 400 600 800 1000
Frequency (MHz)
N F (d B )
Figure 23: Output Return Loss/S22
-45.0
-40.0
-35.0
-30.0
-25.0
-20.0
-15.0
-10.0
-5.0
0.0
5.0
0 100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
S22 (dB)
-40 °C
-20 °C
25 °C
45 °C
85 °C
100 °C
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
11
ACA0861C and ACA0861D Cascade Typical Data (see Figure 42)
Figure 24: CTB (77 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600
Frequency (MHz)
CTB (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 25: CTB (110 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0100 200 300 400 500600 700800
Frequency(MHz)
CTB (dBc)
44
46
48
50
52
Output
Power
(dBmV)
Figure 26: CSO (77 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 100 200 300 400 500 600
Frequency (MHz)
CSO (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 27: CSO (110 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 100 200 300 400 500 600 700 800
Frequency (MHz)
CSO (dBc)
44
46
48
50
52
Output
Power
(dBmV)
Figure 28: XMOD (77 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600
Frequency (MHz)
Xmod (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 29: XMOD (110 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600 700 800
Frequency (MHz)
Xmod (dBc)
44
46
48
50
52
Output
Power
(dBmV)
12 Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
ACA0861C and ACA0861D Cascade Typical Data (see Figure 42)
Figure 30: CTB (128 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 200 400 600 800 1000
Frequency (MHz)
CTB (dBc)
48
46
44
Output
Power
(dBmV)
Figure 31: CTB (77 Channel Loading,8dBTilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600
Frequency (MHz)
CTB (dBc)
56
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 32: CSO (128 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 200 400 600 800 1000
Frequency(MHz)
CSO (dBc)
48
46
44
Output
Power
(dBmV)
Figure 33: CSO (77 Channel Loading,8dBTilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 100 200 300 400 500 600
Frequency (MHz)
CSO (dBc)
56
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 34: XMOD (128 Channel Loading, Flat)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 200 400 600 800 1000
Frequency (MHz)
Xmod (dBc)
48
46
44
Output
Power
(dBmV)
Figure 35: XMOD (77 Channel Loading,8dBTilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600
Frequency (MHz)
Xmod (dBc)
56
54
52
50
48
46
44
Output
Power
(dBmV)
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
13
ACA0861C and ACA0861D Cascade Typical Data (see Figure 42)
Figure 36: CTB (110 Channel Loading, 10 dB Tilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600 700 800
Frequency (MHz)
CTB (dBc)
56
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 37: CTB (128 Channel Loading, 12 dB Tilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 200 400 600 800 1000
Frequency (MHz)
CTB (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 38: CSO (110 Channel Loading, 10 dB Tilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 100 200 300 400 500 600 700 800
Frequency (MHz)
CSO (dBc)
56
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 39: CSO (128 Channel Loading, 12 dB Tilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
0 200 400 600 800 1000
Frequency (MHz)
CSO (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 40: XMOD (110 Channel Loading, 10 dB Tilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 100 200 300 400 500 600 700 800
Frequency (MHz)
Xmod (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
Figure 41: XMOD (128 Channel Loading, 12 dB Tilt)
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0 200 400 600 800 1000
Frequency(MHz)
Xmod (dBc)
54
52
50
48
46
44
Output
Power
(dBmV)
14 Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
APPLICATION INFORMATION
Figure 42: Hybrid Equivalent Test Circuit
Notes:
1. Apply voltage to all +12 Vdc lines simultaneously.
2. See Table 6 for R1 values.
3. Input and output baluns: wind 5 turns thru core (see Table 7), as shown in Figure 43.
Figure 43: Balun Drawing (5 Turns)
Table 7: Parts List for Balun (5 Turns)
PART VENDOR VENDOR PART NO.
ferrite core Philips TC3.4/1.8/1.3-3D3
wire MWS Wire industries B238611
Data Sheet - Rev 2.3
09/2008
ACA0861 - A, B, C, D
15
PACKAGE OUTLINE
Figure 44: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
IMPORTANT NOTICE
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
Data Sheet - Rev 2.3
09/2008
16
ACA0861 - A, B, C, D
ORDERING INFORMATION
ORDER NUMBER TEMPERATURE
RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING
ACA0861AS7CTR -40 to 110 °C 16 Pin wide Body SOIC with
Heat Slug 1,500 piece tape and reel
ACA0861ARS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide
Body SOIC with Heat Slug 1,500 piece tape and reel
ACA0861BS7CTR -40 to 110 °C 16 Pin wide Body SOIC with
Heat Slug 1,500 piece tape and reel
ACA0861BRS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide
Body SOIC with Heat Slug 1,500 piece tape and reel
ACA0861CS7CTR -40 to 110 °C 16 Pin wide Body SOIC with
Heat Slug 1,500 piece tape and reel
ACA0861CRS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide
Body SOIC with Heat Slug 1,500 piece tape and reel
ACA0861DS7CTR -40 to 110 °C 16 Pin wide Body SOIC with
Heat Slug 1,500 piece tape and reel
ACA0861DRS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide
Body SOIC with Heat Slug 1,500 piece tape and reel