SL02, SL03, SL04
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Sep-14 1Document Number: 85687
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Schottky Rectifier Surface Mount
MECHANICAL DATA
Case: DO-219AB (SMF)
Polarity: color band denotes cathode end
Weight: approx. 15 mg
Packaging codes / options:
GS18/10K per 13" reel (8 mm tape), 50K/box
GS08/3K per 7" reel (8 mm tape), 30K/box
Int. construction: single
FEATURES
• For surface mounted applications
• Ideal for automated placement
• Low power loss, high efficiency
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Meets JESD 201 class 2 whisker test
• Wave and reflow solderable
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads (≥ 40 μm thick)
17249
PARTS TABLE
PART ORDERING CODE MARKING REMARKS
SL02 SL02-GS18 or SL02-GS08 S2 Tape and reel
SL03 SL03-GS18 or SL03-GS08 S3 Tape and reel
SL04 SL04-GS18 or SL04-GS08 S4 Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
Maximum repetitive peak reverse voltage
SL02 VRRM 20 V
SL03 VRRM 30 V
SL04 VRRM 40 V
Maximum RMS voltage
SL02 VRMS 14 V
SL03 VRMS 21 V
SL04 VRMS 28 V
Maximum DC blocking voltage
SL02 VDC 20 V
SL03 VDC 30 V
SL04 VDC 40 V
Maximum average forward rectified current Ttp = 109 °C IF(AV) 1.1 A
Peak forward surge current 8.3 ms single
half sine-wave IFSM 40 A
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to ambient air (1) RthJA 180 K/W
Maximum operating junction temperature Tj125 °C
Storage temperature range Tstg -55 to 150 °C
SL02, SL03, SL04
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Sep-14 2Document Number: 85687
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Typical Junction Capacitance
Fig. 3 - Typical Instantaneous Forward Characterisics - SL02
Fig. 4 - Typical Reverse Current Characteristics - SL02
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Instaneous forward voltage
SL02 VF0.360 0.385 V
IF = 0.5 A (1) SL03 VF0.395 0.43 V
SL04 VF0.450 0.51 V
Typical instantaneous forward
voltage IF = 1.1 A
SL02 VF0.420 V
SL03 VF0.450 V
SL04 VF0.530 V
Maximum DC reverse current at
rated DC blocking voltage
TA = 25 °C SL02 IR250 μA
TA = 100 °C SL02 IR8mA
TA = 25 °C SL03 IR130 μA
TA = 100 °C SL03 IR6mA
TA = 25 °C SL04 IR20 μA
TA = 100 °C SL04 IR6mA
Reverse recovery time
SL02 trr < 10 ns
SL03 trr < 10 ns
SL04 trr < 10 ns
010 30 50 70 90 110 130
0
0.5
1.5
1.0
150
Lead Temperature (°C)
Average Forward Current (A)
17379
12
10
50
100
150
200
250
0246810
Junction Capacitance (pF)
Reverse Voltage (V)
SL02
SL04
17380
1
10
00.2 0.4 0.6 0.8 1.0
0.0001
0.001
0.01
0.1
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
Tj = 100 °C
Tj = 50 °C
Tj = 75 °C
Tj = 25 °C
Pulse width = 300 µs
1 % duty cycle
17381
0510 15
1
10
100
1000
10 000
20 25
Instantaneous Reverse Current (µA)
Reverse Voltage (V)
Tj = 100 °C
Tj = 50 °C
Tj = 75 °C
Tj = 25 °C
17382
SL02, SL03, SL04
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Sep-14 3Document Number: 85687
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Typical Instantaneous Forward Characteristics - SL03 Fig. 6 - Typical Reverse Current Characteristics - SL03
PACKAGE DIMENSIONS in millimeters (inches): DO-219AB (SMF)
0.2 0.4 0.6 0.8 1.0
1
10
0
0.0001
0.001
0.01
0.1
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
Tj = 100 °C
Tj = 50 °C
Tj = 75 °C
Tj = 25 °C
Pulse width = 300 µs
1 % duty cycle
17383
0510 15
1
0.1
10
100
1000
10 000
20 25 30 35
Instantaneous Reverse Current (µA)
Reverse Voltage (V)
Tj = 100 °C
Tj = 50 °C
Tj = 75 °C
Tj = 25 °C
17384
Foot print recommendation:
Rev. 3 - Date: 13. March 2007
Document no.:S8-V-3915.01-001 (4)
1.3 (0.051) 1.3 (0.051)
2.9 (0.114)
1.4 (0.055)
2.9 (0.114)
2.7 (0.106)
3.9 (0.154)
3.5 (0.138)
0.85 (0.033)
0.35 (0.014)
1.2 (0.047)
0.8 (0.031)
1.9 (0.075)
1.7 (0.067)
1.08 (0.043)
0.88 (0.035)
0.25 (0.010)
0.05 (0.002)
0.1 (0.004)
0 (0.000)
5
5
Created - Date: 15. February 2005
17247
Detail Z
enlarged
SL02, SL03, SL04
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Sep-14 4Document Number: 85687
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BLISTERTAPE DIMENSIONS in millimeters: DO-219 AB (SMF)
18513
PS
Document-No.: S8-V-3717.02-001 (3)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
