2003 thru 2024 High-Voltage, High-Current Darlington Arrays Not for New Design These parts are in production but have been determined to be NOT FOR NEW DESIGN. This classification indicates that sale of this device is currently restricted to existing customer applications. The device should not be purchased for new design applications because obsolescence in the near future is probable. Samples are no longer available. Date of status change: November 1, 2004 Recommended Substitutions: NOTE: For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative. Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other rights of third parties which may result from its use. Data Sheet 29304F 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 Ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads, the Series ULN20xxA/L high-voltage, high-current Darlington arrays feature continuous load current ratings to 500 mA for each of the seven drivers. At an appropriate duty cycle depending on ambient temperature and number of drivers turned ON simultaneously, typical power loads totaling over 230 W (350 mA x 7, 95 V) can be controlled. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes. The ULN2003A/L and ULN2023A/L have series input resistors selected for operation directly with 5 V TTL or CMOS. These devices will handle numerous interface needs -- particularly those beyond the capabilities of standard logic buffers. The ULN2004A/L and ULN2024A/L have series input resistors for operation directly from 6 to 15 V CMOS or PMOS logic outputs. Dwg. No. A-9594 Note that the ULN20xxA series (dual in-line package) and ULN20xxL series (small-outline IC package) are electrically identical and share a common terminal number assignment. The ULN2003A/L and ULN2004A/L are the standard Darlington arrays. The outputs are capable of sinking 500 mA and will withstand at least 50 V in the OFF state. Outputs may be paralleled for higher load current capability. The ULN2023A/L and ULN2024A/L will withstand 95 V in the OFF state. ABSOLUTE MAXIMUM RATINGS These Darlington arrays are furnished in 16-pin dual in-line plastic packages (suffix "A") and 16-lead surface-mountable SOICs (suffix "L"). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. All devices are rated for operation over the temperature range of -20C to +85C. Most (see matrix, next page) are also available for operation to -40C; to order, change the prefix from "ULN" to "ULQ". Output Voltage, VCE (ULN200xA and ULN200xL) ........ 50 V (ULN202xA and ULN202xL) ........ 95 V Input Voltage, VIN ................................ 30 V Continuous Output Current, IC ................................................. 500 mA Continuous Input Current, IIN ........... 25 mA Power Dissipation, PD (one Darlington pair) ..................... 1.0 W (total package) ....................... See Graph Operating Temperature Range, TA .................................. -20C to +85C Storage Temperature Range, TS ................................. -55C to +150C FEATURES TTL, DTL, PMOS, or CMOS-Compatible Inputs Output Current to 500 mA Output Voltage to 95 V Transient-Protected Outputs Dual In-Line Plastic Package or Small-Outline IC Package x = digit to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. See matrix on next page. 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS DEVICE PART NUMBER DESIGNATION VCE(MAX) 50 V 95 V IC(MAX) 500 mA 500 mA Logic PARTIAL SCHEMATICS Part Number 5V TTL, CMOS ULN2003A* ULN2003L* ULN2023A* ULN2023L 6-15 V CMOS, PMOS ULN2004A* ULN2004L* ULN2024A ULN2024L *Also available for operation between -40C and +85C. To order, change prefix from "ULN" to "ULQ". ULN20x3A/L (Each Driver) 2.7K 7.2K 3K Dwg. No. A-9651 ULN20x4A/L (Each Driver) COM 10.5K 7.2K 3K ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS COM 2.5 2.0 SUFFIX 'A', R JA = 60C/W 1.5 1.0 0.5 0 SUFFIX 'L', R JA = 90C/W 25 50 75 100 125 AMBIENT TEMPERATURE IN C 150 Dwg. GP-006A Dwg. No. A-9898A X = Digit to identify specific device. Specification shown applies to family of devices with remaining digits as shown. See matrix above. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright (c) 1974, 1998 Allegro MicroSystems, Inc. 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Types ULN2003A, ULN2003L, ULN2004A, and ULN2004L ELECTRICAL CHARACTERISTICS at +25C (unless otherwise noted). Characteristic Output Leakage Current Collector-Emitter Saturation Voltage Symbol Test Fig. Applicable Devices ICEX 1A All VCE(SAT) Input Current Input Voltage IIN(ON) Min. VCE = 50 V, TA = 25C -- <1 50 A VCE = 50 V, TA = 70C -- <1 100 A VCE = 50 V, TA = 70C, VIN = 1.0 V -- <5 500 A IC = 100 mA, IB = 250 A -- 0.9 1.1 V lC = 200 mA, IB = 350 A -- 1.1 1.3 V IC = 350 mA, IB = 500 A -- 1.3 1.6 V ULN2003A/L VIN = 3.85 V -- 0.93 1.35 mA ULN2004A/L VIN = 5.0 V -- 0.35 0.5 mA VIN = 12 V -- 1.0 1.45 mA lC = 500 A, TA = 70C 50 65 -- A VCE = 2.0 V, lC = 200 mA -- -- 2.4 V VCE = 2.0 V, IC = 250 mA -- -- 2.7 V VCE = 2.0 V, lC = 300 mA -- -- 3.0 V VCE = 2.0 V, lC = 125 mA -- -- 5.0 V VCE = 2.0 V, lC = 200 mA -- -- 6.0 V VCE = 2.0 V, IC = 275 mA -- -- 7.0 V VCE = 2.0 V, lC = 350 mA -- -- 8.0 V -- 15 25 pF 1B ULN2004A/L 2 All 3 Limits Typ. Max. Test Conditions IIN(OFF) 4 All VIN(ON) 5 ULN2003A/L ULN2004A/L Units Input Capacitance CIN -- All Turn-On Delay tPLH 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Turn-Off Delay tPHL 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Clamp Diode Leakage Current IR 6 All VR = 50 V, TA = 25C -- -- 50 A VR = 50 V, TA = 70C -- -- 100 A Clamp Diode Forward Voltage VF IF = 350 mA -- 1.7 2.0 V 7 All Complete part number includes suffix to identify package style: A = DIP, L = SOIC. www.allegromicro.com 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Types ULN2023A, ULN2023L, ULN2024A, and ULN2024L ELECTRICAL CHARACTERISTICS at +25C (unless otherwise noted). Characteristic Output Leakage Current Collector-Emitter Saturation Voltage Input Current Input Voltage Symbol Test Fig. Applicable Devices ICEX 1A All VCE(SAT) IIN(ON) Test Conditions Min. VCE = 95 V, TA = 25C -- <1 50 A VCE = 95 V, TA = 70C -- <1 100 A VCE = 95 V, TA = 70C, VIN = 1.0 V -- <5 500 A IC = 100 mA, IB = 250 A -- 0.9 1.1 V lC = 200 mA, IB = 350 A -- 1.1 1.3 V IC = 350 mA, IB = 500 A -- 1.3 1.6 V ULN2023A/L VIN = 3.85 V -- 0.93 1.35 mA ULN2024A/L VIN = 5.0 V -- 0.35 0.5 mA VIN = 12 V -- 1.0 1.45 mA lC = 500 A, TA = 70C 50 65 -- A VCE = 2.0 V, lC = 200 mA -- -- 2.4 V VCE = 2.0 V, IC = 250 mA -- -- 2.7 V VCE = 2.0 V, lC = 300 mA -- -- 3.0 V VCE = 2.0 V, lC = 125 mA -- -- 5.0 V VCE = 2.0 V, lC = 200 mA -- -- 6.0 V VCE = 2.0 V, IC = 275 mA -- -- 7.0 V VCE = 2.0 V, lC = 350 mA -- -- 8.0 V -- 15 25 pF 1B ULN2024A/L 2 All 3 Limits Typ. Max. IIN(OFF) 4 All VIN(ON) 5 ULN2023A/L ULN2024A/L Units Input Capacitance CIN -- All Turn-On Delay tPLH 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Turn-Off Delay tPHL 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Clamp Diode Leakage Current IR 6 All VR = 95 V, TA = 25C -- -- 50 A VR = 95 V, TA = 70C -- -- 100 A Clamp Diode Forward Voltage VF IF = 350 mA -- 1.7 2.0 V 7 All Complete part number includes suffix to identify package style: A = DIP, L = SOIC. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS TEST FIGURES FIGURE 1A OPEN FIGURE 1B VCE FIGURE 2 VCE OPEN A I hFE = C IB A ICEX OPEN OPEN ICEX VIN V IB Dwg. No. A-9729A IC VCE Dwg. No. A-9730A FIGURE 3 Dwg. No. A-9731A FIGURE 4 OPEN FIGURE 5 VCE OPEN OPEN A IIN IIN mA IC A OPEN VIN VIN V V VCE Dwg. No. A-9732A Dwg. No. A-9733A FIGURE 6 IC Dwg. No. A-9734A FIGURE 7 FIGURE 8 VR VIN 50% INPUT A IF V IR OPEN OPEN 50% OUTPUT t pHL VF t pHL 50% 50% +50 V Vin Dwg. No. A-9735A Dwg. No. A-9736A ULN20X3* ULN20X4* 3.5 V 12 V PULSE GENERATOR PRR = 10KHz DC = 50% INPUT 93 30 * Complete part number includes a final letter to indicate package. X = Digit to identify specific device. Specification shown applies to family of devices with remaining digits as shown. www.allegromicro.com 100 OUT 50 pF 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE TYPICAL APPLICATIONS (Dual In-line-Packaged Devices, Suffix `A') +VSS 600 +V 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 OUTPUT CURRENT IN mA/CHANNEL 1 2 400 3 4 5 6 7 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY PMOS OUTPUT TA = +70C RJA = 60C/W Dwg. No. A-9652 0 0 20 40 60 80 100 +VDD DUTY CYCLE IN PER CENT Dwg. GP-070 (Small-Outline-Packaged Devices, Suffix `L') OUTPUT CURRENT IN mA/CHANNEL 600 TA = +70C RJA = 90C/W 400 +V 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 200 2 2N4901 200 3 4 200 5 6 7 CMOS OUTPUT NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY Dwg. No. A-9654A 0 0 20 40 60 80 100 DUTY CYCLE IN PER CENT Dwg. GP-044A SATURATION VOLTAGE AS A FUNCTION OF COLLECTOR CURRENT COLLECTOR CURRENT AS A FUNCTION OF INPUT CURRENT 200 0 CA L 400 PI 400 TY COLLECTOR CURRENT IN mA 600 TY PI M CA AX L .S AT UR AT IO N VO LT AG E COLLECTOR CURRENT IN mA 600 'D EQ .R AX M 200 T PU IN T EN RR U C 0 0 0.5 1.0 1.5 2.0 0 200 400 600 INPUT CURRENT IN A COLLECTOR-EMITTER SATURATION VOLTAGE Dwg. GP-067 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Dwg. GP-068 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS TYPICAL APPLICATIONS +VCC INPUT CURRENT AS A FUNCTION OF INPUT VOLTAGE Types ULN2003A, ULN2003L, ULN2023A, and ULN2023L +V 16 2 15 3 14 4 13 5 12 6 11 2.5 2.0 7 10 8 9 INPUT CURRENT IN mA -- I IN 1 TTL OUTPUT M MU XI MA 1.5 TY AL 1.0 0.5 Dwg. No. A-9653A P IC AREA OF NORMAL OPERATION WITH STANDARD OR SCHOTTKY TTL 0 2.0 3.0 4.0 5.0 6.0 INPUT VOLTAGE Dwg. GP-069 +VCC Types ULN2004A, ULN2004L, ULN2024A, and ULN2024L +V 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TTL OUTPUT 2.0 INPUT CURRENT IN mA -- IIN RP 1 1.5 XIM MA 1.0 UM AL TYPIC 0.5 Dwg. No. A-10,175 0 5 6 7 8 9 10 11 12 INPUT VOLTAGE Dwg. GP-069-1 www.allegromicro.com 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS PACKAGE DESIGNATOR "A" Dimensions in Inches (controlling dimensions) 0.014 0.008 9 16 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 0.775 0.735 8 0.005 BSC MIN 0.210 MAX 0.015 0.150 0.115 MIN 0.022 0.014 Dwg. MA-001-16A in Dimension in Millimeters (for reference only) 0.355 0.204 9 16 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 19.68 18.67 BSC 8 0.13 MIN 5.33 MAX 0.39 3.81 2.93 MIN 0.558 0.356 NOTES: 1. 2. 3. 4. Dwg. MA-001-16A mm Leads 1, 8, 9, and 16 may be half leads at vendor's option. Lead thickness is measured at seating plane or below. Lead spacing tolerance is non-cumulative. Exact body and lead configuration at vendor's option within limits shown. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS PACKAGE DESIGNATOR "L" Dimensions in Inches (for reference only) 16 9 0.0098 0.0075 0.1574 0.1497 0.020 0.013 0.2440 0.2284 1 2 3 0.050 0.3937 0.3859 0.050 0.016 0 TO 8 BSC 0.0688 0.0532 Dwg. MA-007-16 in 0.0040 MIN. Dimension in Millimeters (controlling dimensions) 16 9 0.25 0.19 4.00 3.80 0.51 0.33 6.20 5.80 1 2 3 1.27 10.0 9.80 BSC 1.27 0.40 0 TO 8 1.75 1.35 0.10 MIN. NOTES: 1. Lead spacing tolerance is non-cumulative. 2. Exact body and lead configuration at vendor's option within limits shown. www.allegromicro.com Dwg. MA-007-16A mm 2003 THRU 2024 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000