APEM www.apem.com A-7
TL series
Tiny washable toggle switches
Distinctive features and specifications
A
MATERIALS
• Case : PBT
• Actuator : brass, nickel plated
• Contacts and terminals :
0: brass, gold plated
1: brass, silver plated
3: brass, gold plated (1,27
micron gold)
8: contact brass, gold plated
+ tin plated terminals
9: contact brass, gold plated
(1,27 micron gold) + tin plated
terminals
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Strength of terminals : pull-out force - 10N max.
• Operating temperature : -30°C to +85°C
• Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3)
• Cleaning : solvents or water + detergent
• Wave soldering : 260°C - 5 sec.
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- gold plated contacts : 0,4VA 20V max. AC or DC
- silver plated contacts : 0,5A 48V max. AC or DC
• Minimum load : 10mA 50mV - 10µA 5VDC
• Contact resistance : 20 mmax.
• Insulation resistance : 1.000 Mmin. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals and frame
500 Vrms 50 Hz min. between terminals
• Electrical life at full load :
Contacts
Gold plated
Silver plated 60.000 30.000
20.000 10.000
Number of cycles
2 positions 3 positions
Sealed
• Single piece case
• O-ring seal between actuator and bushing
• Epoxy sealed terminals
Wide variety of contact materials
Same PCB layout as TP, TR and TG tiny switches
A-8 APEM www.apem.com
TL series
Tiny washable toggle switches
Overview
A
TL
SERIES
Number of poles
3Single pole
4Double pole
Electrical functions
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
2ON - MOM
Terminals
P0 Straight PC
Y0 Bracket mounting
W0 Right angle, horizontal mounting
WW Right angle, vertical mounting
MW Wire-wrap
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Contact and terminal
materials
0Brass, gold plated
1Brass, silver plated
3Brass, gold plated
(1,27 micron gold)
8Contact brass, gold
plated + tin plated
terminals
9Contact brass, gold
plated (1,27 micron
gold) + tin plated
terminals
Lever and case styles
Lever styles :
• Short - standard
• Medium
• Long
• Cylindrical
Codes according to lever
finish and case colours : see
"options" pages.
Insulated levers available.
Special options
00 No special requirement
07 Trimmed terminals - length 3,2 (.125)
08 Extended terminals
18 Switch without ground plate
20 Ground plate with 2 pins
25 Trimmed terminals - length 5 (.196)
30 Wire-wrap on bracket mounting models
50 Crimped ground plate pins
Packaging unit : 100 pieces, except for models with WW terminals (50 pieces)
APEM www.apem.com A-9
TL series
Tiny washable toggle switches
A
Right angle terminals - horizontal mounting : TL..W0
Straight PC terminals - bracket mounting : TL..Y0
Straight PC terminals : TL..P0
MODEL
STRUCTURE
III II I
Single pole Double pole
TL36P0 TL46P0 ON - ON
TL39P0 TL49P0 ON OFF ON
TL37P0 TL47P0 MOM OFF MOM
TL38P0 TL48P0 ON OFF MOM
TL32P0 TL42P0 ON - MOM
• Straight PC, right angle or wire-wrap terminals
•1 and 2 pole configurations
III II I
Single pole Double pole
TL36Y0 TL46Y0 ON - ON
TL39Y0 TL49Y0 ON OFF ON
TL37Y0 TL47Y0 MOM OFF MOM
TL38Y0 TL48Y0 ON OFF MOM
TL32Y0 TL42Y0 ON - MOM
III II I
Single pole Double pole
TL36W0 TL46W0 ON - ON
TL39W0 TL49W0 ON OFF ON
TL37W0 TL47W0 MOM OFF MOM
TL38W0 TL48W0 ON OFF MOM
TL32W0 TL42W0 ON - MOM
Shown with standard lever
1 2 3
(.027)
(.129)
3.30
0.70
(.598)
(.027)
15.20
0.70
Ø1.10
(.043 DIA)
5.08
1.00
3.30
4.20
Ø2.50
0.70
5.00
Ø4.60
Ø5.00
0.50
9.10
3.80
2.54
2.54
(.196)
(.027)
(.129)
(.098 DIA) 24˚
(.196 DIA)
(.181 DIA)
(.019)
(.358)
(.039)
(.165)
(.149)
(.200)
(.100)
(.100)
(.318)
8.10
(.318)
8.10
(.043 DIA)
Ø1.10
6.10 5.30
(.208)
(.240)
(.200)
5.08
(.100)
2.54
IIIIII
321
14
456
(.400)
(.100)
(.100)
(.200)
(.149)
(.165)
(.039)
(.027)
(.358)
(.015) (.019)
(.400)
(.224) (.208)
(.181 DIA)
(.196 DIA)
24˚
(.098 DIA)
(.129) (.338)
(.196)
(.400)
2.54
10.16
2.54
10.16
3.80
0.70
9.10
10.16
0.50
Ø5.00
Ø4.60
0.40
5.00
Ø2.50
4.20
3.30 8.60
5.30
5.70
1.00
5.08
(.043 DIA)
Ø1.10
(.043 DIA)
Ø1.10
2.54
(.100)
(.200)
5.08
IIIIII
321
456
14
(.149)
(.165)
(.200)
24°
(.181 DIA)
(.196 DIA)
(.129)
(.318)
(.019)
(.377)
(.362)
(.137)
(.208)
(.0.98 DIA)
(.218)
(.027)
(.129)
(.200)
(.200)
(.100)
(.100)
(.043 DIA)
(.100)
(.200)
(.043 DIA)
5.55
3.30
ø2.50
0.50
8.10
ø5.00
ø4.60
4.20
3.80
9.60 3.30
ø1.10
2.54
5.08
2.54
ø1.10
0.70
3.50
5.30
9.20
5.08
5.08 5.08
2.54
(.100)
2.54
IIIIII
321
654
3
6
A-10 APEM www.apem.com
TL series
Tiny washable toggle switches
A
Wire-wrap terminals : TL..MW
Right angle terminals - vertical mounting : TL..WW
III II I
Single pole Double pole
TL36WW TL46WW ON - ON
TL39WW TL49WW ON OFF ON
TL37WW TL47WW MOM OFF MOM
TL38WW* TL48WW* ON OFF MOM
TL32WW* TL42WW* ON - MOM
III II I
Single pole Double pole
TL36MW TL46MW ON - ON
TL39MW TL49MW ON OFF ON
TL37MW TL47MW MOM OFF MOM
TL38MW TL48MW ON OFF MOM
TL32MW TL42MW ON - MOM
*Functions 2 and 8 : reversed connection available. Consult factory.
PCB MOUNTING
(.559)
(.562)
(.120)
(.218)
(.181)
(.340)
8.65
4.60
5.55
3.05
14.30
14.20
(.196)
5.00
(.377)
9.60
(.100)
(.100)
(.200)
(.149)
(.165)
(.039)
(.358)
(.019)
(.181 DIA)
(.196 DIA)
24˚
(.098 DIA)
(.598)
(.027)
(.196)
2.54
2.54
3.80
9.10
0.50
Ø5.00
Ø4.60
5.00
0.70
Ø2.50
4.20
15.20
1.00
5.08
(.043 DIA)
Ø1.10
(.318)
8.10
(.318)
8.10
(.200)
5.08
Ø1.10
(.043 DIA)
6.10 5.30
(.208)
(.240)
2.54
(.100)
IIIIII
123
456
14
(.129)(.340)
(.200) (.200)
(.196)
(.200)
(.098 DIA) (.149)
(.362) (.208)
(.196 DIA)
(.181 DIA)
(.165)
(.027) (.200)
(.019)
(.358)
(.200)
(.100)
(.200)
(.100)
(.043 DIA)
(.043 DIA)
(.137)
24˚
Ø2.5
4.20
Ø4.60
Ø5.00
0.70
5.00
8.65 3.30
5.08 5.08
9.10
5.08
Ø1.10
Ø1.10
5.08
2.54
2.54
3.80
5.08
0.50
3.50
5.30
9.20
5.08
(.200)
5.08
IIIIII
1
2
3
63
6
5
4
APEM www.apem.com A-11
TL series
Tiny washable toggle switches
A
CONTACT AND TERMINAL MATERIALS
0Brass, gold plated
1Brass, silver plated
3Brass, gold plated (1,27 micron gold)
8Contact brass, gold plated + tin plated terminals
9Contact brass, gold plated (1,27 micron gold) + tin plated terminals
LEVER AND CASE STYLES
Short - standard Long
Cylindrical
Medium
CASE
LEVER Blue Black
Nickel plated
Matt black
00 50
01 51
CASE
LEVER Blue Black
Nickel plated -56
CASE
LEVER Blue Black
Nickel plated
Matt black
04 54
05 55
CASE
LEVER Blue Black
Nickel plated
Matt black
02 52
03 53
(.208)
(.240)
(.196 DIA)
(.181 DIA)
(.165)
(0149)
(.098 DIA) 24˚
Ø4.60
Ø5.00
4.20
3.80
Ø2.50
5.30
6.10
(.149)
(.165)
(.181 DIA)
(.196 DIA)
(.240)
Ø4.60
Ø5.00
4.20
3.80
6.10 (.255)
24˚
6.50
(.062 DIA)
Ø1.60
(.098 DIA)
(.149)
(.165)
(.181 DIA)
(.196 DIA)
(.240) (.370)
24˚
Ø4.60
Ø5.00
4.20
3.80
Ø2.50
9.40
6.10
6.10
Ø2.50
3.80
4.20 Ø5.00
Ø4.60
(.240)
(.196 DIA)
(.181 DIA)
(.165)
(.149)
(.098 DIA)
(.291)
24˚
7.40
A-12 APEM www.apem.com
TL series
Tiny washable toggle switches
A
SPECIAL OPTIONS
07 Trimmed terminals - length 3,2 mm (.125) for TL..WW models only
00 No special requirement
40 With blue case
94 With black case 30 With blue case
90 With black case
08 Extended terminals for TL..W0 models only
18 Switch without ground plate for TL..WW models only
07
08
18
Insulated levers - Protected against electrostatic discharges (ESD) up to 10KV. Black colour.
20 Ground plate with 2 pins for TL..WW models only
20
LEVER AND CASE STYLES (continued)
(.098 DIA)
(.149)
(.165)
(.181 DIA)
(.196 DIA)
(.240)
Ø4.60
Ø5.00
4.20
3.80
Ø2.50
6.10 (.216)
5.50
24˚
6.10
Ø2.50
3.80
4.20 Ø5.00
Ø4.60
24˚
(.240)
(.196 DIA)
(.181 DIA)
(.165)
(.149)
(.098 DIA)
(.299)
7.60
(.125)
3.20
(.492)
12.50
2.70
(.106)
10.16
(.400)
(.200)
(.400)
(.100)
(.043 DIA)
5.08
Ø1.10
10.16
2.54
50 Crimped ground plate pins.
Retains switch on PCB during handling and wave soldering.
For models TL..W0, TL..WW and TL..Y0 single and double pole. 50
30 Wire-wrap terminals on models with mounting bracket
30
25 Trimmed terminals - length 5 mm (.196) for all models, except TL..WW
25
(.196)
5.00
(.598)
15.20