KFV KGV Einbaukupplung nach IEC 61076-2-106, IP 40, mit Schraubverschluss und Lotanschlussen KFV: fur Frontmontage KGV: fur Ruckseitenmontage 1. Temperaturbereich -40 C/+85 C 2. Werkstoffe KFV KGV Kontakttrager Kontaktbuchse 3- bis 8-polig Kontaktbuchse 12-polig Gehause Ringmutter PA GF CuZn, versilbert und flashvergoldet CuZn, unternickelt und vergoldet Zn-Druckguss, vernickelt CuZn, vernickelt 3. Mechanische Daten Steckkraft/Kontakt 3- bis 8-polig1 Steckkraft/Kontakt 12-polig2 Ziehkraft/Kontakt 3- bis 8-polig1 Ziehkraft/Kontakt 12-polig2 Kontaktierung mit Schutzart3 Weiteres siehe Tabelle < 5,0 N < 5,0 N > 1,2 N > 0,9 N Steckern SV, WSV Steckern nach IEC 61076-2-106 und IEC 60130-9 Kupplungen nach IEC 61076-2-106 und IEC 60130-9 IP 40 4. Elektrische Daten 5 m Durchgangswiderstand Weiteres siehe Tabelle 1 2 3 4 gemessen mit einem polierten Stahlstift, Nennma 1,5 mm gemessen mit einem polierten Stahlstift, Nennma 1,0 mm nach DIN EN 60529, nur in verschraubtem Zustand mit einem dazugehorigen Gegenstuck nach VDE 0110/IEC 60664 *a Mutter lose beigestellt nut enclosed separately ecrou ajoute separement *b Lotkelch bell-shaped solder terminal plot a souder en forme de coupe *c Montagerichtung mounting direction direction de montage *d Einbauoffnung port ouverture d'emplacement Polbilder, von der Lotseite gesehen Pin configurations, solder side view Schemas de raccordement, vus du cote a souder KFV 30 KGV 30 KFV 40 KGV 40 www.lumberg.com KFV 50 KGV 50 KFV 50/6 KGV 50/6 KFV 60 KGV 60 KFV 70 KGV 70 KFV 71 KGV 71 KFV 80 KGV 80 KFV 81 KGV 81 KFV 120 KGV 120 10/2013 Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP 40 Circular connectors with threaded joint acc. to IEC 61076-2-106, IP 40 Connecteurs circulaires avec verrouillage a vis suivant CEI 61076-2-106, IP 40 KFV 03 KGV KFV 03 KGV Chassis socket acc. to IEC 61076-2-106, IP 40, with threaded joint and solder terminals KFV: for front mounting KGV: for rear mounting Embase femelle suivant CEI 61076-2-106, IP 40, avec verrouillage a vis et connexion par soudure KFV: pour montage de front KGV: pour montage par derriere 1. Temperature range 1. Temperature d'utilisation -40 C/+85 C 2. Materials Insulating body Contact bush 3 to 8 poles Contact bush 12 poles Housing Ring nut PA GF CuZn, silver and flash gold-plated CuZn, pre-nickeled and gold-plated Zn diecast, nickel-plated CuZn, nickel-plated 3. Mechanical data Protection3 For further information see table 4. Caracteristiques electriques Contact resistance For further information see table 4 5 m Resistance de contact Pour plus de details, voir tableau 1 measured with a polished steel pin, nominal thickness 1.5 mm measured with a polished steel pin, nominal thickness 1.0 mm according to DIN EN 60529, only in locked position with a proper counterpart according to VDE 0110/IEC 60664 Polz ah Pole l s Pole s Bestellbezeichnung Designation Designation 2 3 4 5 m mesuree avec une tige d'acier poli, epaisseur nominale 1,5 mm mesuree avec une tige d'acier poli, epaisseur nominale 1,0 mm suivant DIN EN 60529, uniquement a l'etat verrouille avec un propre pendant suivant VDE 0110/CEI 60664 Ver pac ku Pac kag ngsein hei eu Uni te d nit (PU t (VE) 'em ) ball age (UE Ans ) ch Wir lussque es rs Sec ection chnitt tion de racc . de fil Bem essu ngs Rat s ed tro Cou curren m t ran t as sign e Bem essu ngs Rat spa ed Ten voltag 4 nnung 4 sion e assi gne 4 e Pru fspa nnu Test ng vo Ten ltage sion d'es sai Isol ati Insu onswid er lat Res ion re stand ista s nce istanc e d'is olem Kon ent tak t Con k tact apazit Cap at a capa con cite de citanc tact e 3 PA GF CuZn, argente et dore flash CuZn, sous-nickele et dore Zn moule sous pression, nickele CuZn, nickele Force d'insertion/contact 3-8 poles1 < 5,0 N < 5,0 N Force d'insertion/contact poles2 Force de separation/contact 3-8 poles1 > 1,2 N Force de separation/contact 12 poles2 > 0,9 N Raccordement avec connecteurs males SV, WSV connecteurs males suivant CEI 61076-2-106 et CEI 60130-9 IP 40 Protection3 Pour plus de details, voir tableau < 5.0 N < 5.0 N > 1.2 N > 0.9 N plugs SV, WSV plugs according to IEC 61076-2-106 and IEC 60130-9 IP 40 4. Electrical data 2 Corps isolant Prise de contact 3 a 8 poles Prise de contact 12 poles Boitier Ecrou a anneau 3. Caracteristiques mecaniques Insertion force/contact 3-8 poles1 Insertion force/contact 12 poles2 Withdrawal force/contact 3-8 poles1 Withdrawal force/contact 12 poles2 Mating with 1 -40 C/+85 C 2. Materiaux mm A V AC kV AC eff. G pF KFV 30 KGV 30 3 50 0,75 5 250 2 > 10 ~2 KFV 40 KGV 40 4 50 0,75 5 250 2 > 10 ~2 KFV 50 KGV 50 5 50 0,75 5 60 1 > 10 ~3 KFV 50/6 KGV 50/6 5 50 0,75 5 250 2 > 10 ~2 KFV 60 KGV 60 6 50 0,75 5 250 2 > 10 ~2 KFV 70 KGV 70 7 50 0,75 5 250 2 > 10 ~2 KFV 71 KGV 71 7 50 0,75 5 60 1 > 10 ~3 KFV 80 KGV 80 8 50 0,75 5 60 1 > 10 ~3 KFV 81 KGV 81 8 50 0,75 5 60 1 > 10 ~3 KFV 120 KGV 120 12 50 0,25 3 60 1 > 10 ~3 Verpackung: im Karton Packaging: in a cardboard box Emballage: dans un carton www.lumberg.com 10/2013