1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Meets or exceeds EIA Standard 535BAAC
• Taped and reeled per EIA 481
• High surge current capability
• Optional gold-plated terminations
• High ripple current capability
• 100% surge current test on B, C, D, E, U, V, and X sizes
• 100% steady-state accelerated aging
• Capacitancevaluesof0.1to1,000μF
• Tolerances of ±10% and ±20%
• Voltage rating of 2.5 – 50 VDC
• Extended range values
• RoHS compliant and lead-free terminations
• Operatingtemperaturerangeof−55°Cto+125°C
Overview
The low ESR, surge-robust T495 is designed for
demanding applications that require high surge current
and high ripple current capability. The T495 builds upon
the proven capabilities of our industrial grade tantalum
chip capacitors to offer several advantages such as low
ESR, high ripple current capability, excellent capacitance
stability, and improved resistance to high in-rush currents.
Thesebenetsareachievedthroughacombinationof
proprietary design, materials, and process parameters, as
well as high-stress, low impedance electrical conditioning
performedpriortoscreening.TheT495isclassiedas
moisture sensitivity level (MSL) 1 under J STD 020, with
unlimitedoorlifetimeat≤30°C/85%RH.
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Applications
Typicalapplicationsincludedecouplingandlteringinautomotiveendapplications,suchasDC/DCconverters,portable
electronics, telecommunications, and control units requiring high ripple current capability.
Environmental Compliance
RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic
100% Sn solder.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
2
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
K-SIM
Foradetailedanalysisofspecicpartnumbers,pleasevisitksim.kemet.comtoaccessKEMET’sK-SIMsoftware.KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T495 X107 M010 A T E045
Capacitor
Class Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Failure Rate/
Design Termination Finish ESR Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low
ESR
A,
B,
C,
D,
E,
M,
T,
U,
V,
W,
X
First two
digits
represent
signicant
gures.Third
digitspecies
number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5
004 = 4
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A T = 100% Matte tin
(Sn)-plated
H = Standard solder
coated
(SnPb 5% Pb minimum)
G = Gold-plated
(A, B, C, D, X only)
N = Non-magnetic 100%
tin (Sn)
M = Non-magnetic (SnPb)
E = ESR
last three
digits specify
ESRinmΩ
(45=45mΩ)
Blank = 7" reel
7280 = 13" reel
Performance Characteristics
Item Performance Characteristics
Operating Temperature −55°Cto125°C
Rated Capacitance Range 0.47–1,000µFat120Hz/25°C
Capacitance Tolerance K tolerance (10%), M tolerance (20%)
Rated Voltage Range 2.5 – 50 V
DF (120 Hz) RefertoPartNumberElectricalSpecicationTable
ESR (100 kHz) RefertoPartNumberElectricalSpecicationTable
Leakage Current ≤0.01CV(µA)atratedvoltageafter5minutes
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
3
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Qualication
Test Condition Characteristics
Endurance 85°Catratedvoltage,2,000hours.
125°Cat2/3ratedvoltage,2,000hours.
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°Cat0volts,2,000hours.
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MIL–STD–202, Method 107, Condition B, mounted,
−55C°to125°C,1,000cycles.
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
successionofcontinuousstepsat+25°C,
−55°C,+25°C,+85°C,+125°C,+25°C.
+25°C −55°C +85°C +125°C
ΔC/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL N/A 10 x IL 12 x IL
Surge Voltage 85°C,1.32xratedvoltage1,000cycles
(125°C,1.2xratedvoltage).
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/
Vibration
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000
Hz, 20 G peak
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
Electrical Characteristics
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,00
0
Capacitance (μF)
Frequency (Hz)
T495C476M016ATE350
T495D157M016ATE085
T495X227M016ATE100
Capacitance vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T495C476M016ATE350_IMP
T495D157M016ATE085_IMP
T495X227M016ATE100_IMP
T495C476M016ATE350_ESR
T495D157M016ATE085_ESR
T495X227M016ATE100_ESR
ESR vs. Frequency
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
4
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Dimensions – Millimeters (Inches)
Metric will govern
H
X
T
B
B
G
F
E
A
L
R
P
SIDE VIEW
ANODE (+) END VIEW BOTTOM VIEW
CATHODE (-) END VIEW
W
S
S
Termination cutout
at KEMET's option,
either end
Glue pad
shape/design at
KEMET's option
Case Size Component
Typical
Weight
KEMET EIA L W H F ±0.1
±(0.004)
S
(Ref)
±0.006 X (Ref) P
(Ref) R
(Ref) T
(Ref) A
(Min) G
(Ref) E
(Ref) (mg)
A3216–18 3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063
±0.008)
1.6 ±0.2
(0.063 ±0.008) 1.2
(0.047)
0.80 (0.032)
+0.2(0.008)
/−0.3(0.011)
0.4
(0.016) 0.10 ±0.10
(0.004 ±0.004) 0.4
(0.016) 0.4
(0.016) 0.13
(0.005) 1.2
(0.047) 1.1
(0.043) 1.3
(0.051) 58.60
B3528–21 3.5 ±0.2
(0.138 ±0.008) 2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008) 2.2
(0.087)
0.80 (0.032)
+0.1(0.004)
/−0.3(0.011)
0.4
(0.016) 0.10 ±0.10
(0.004 ±0.004) 0.5
(0.020) 1.0
(0.039) 0.13
(0.005) 1.9
(0.075) 1.8
(0.071) 2.2
(0.087) 107.45
M3528-15 3.5 ±0.2
(0.138 ±0.008) 2.8 ±0.2
(0.110 ±0.008)
1.5
(0.059) 2.2
(0.087) 0.8 (0.031)
±0.3 (0.012) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
1.9
(0.075)
1.8
(0.071) 2.2
(0.087) 97.99
C6032–28 6.0 ±0.3
(0.236 ±0.012) 3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012) 2.2
(0.087) 1.3 (0.051)
±0.3 (0.012) 0.5
(0.020) 0.10 ±0.10
(0.004 ±0.004) 0.9
(0.035) 1.0
(0.039) 0.13
(0.005) 2.9
(0.114) 2.8
(0.110) 2.4
(0.094) 224.48
U6032-15 6.0 ±0.3
(0.236 ±0.012) 3.2 ±0.2
(0.110 ±0.008)
1.5
(0.059) 2.2
(0.087) 1.3 (0.051)
±0.3 (0.012) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
2.9
(0.114)
2.8
(0.110) 2.4
(0.094) 70.00
D7343–31 7.3 ±0.3
(0.287 ±0.012) 4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012) 2.4
(0.094) 1.3 (0.051)
±0.3 (0.012) 0.5
(0.020) 0.10 ±0.10
(0.004 ±0.004) 0.9
(0.035) 1.0
(0.039) 0.13
(0.005) 3.6
(0.142) 3.5
(0.138) 3.5
(0.138) 446.84
W7343-15 7.3 ±0.3
(0.287 ±0.012) 4.3 ±0.3
(0.169 ±0.012)
1.5
(0.059) 2.4
(0.094) 1.3 (0.051)
±0.3 (0.012) N/A 0.05
(0.002) N/A N/A 0.13
(0.005) 3.6
(0.142) 3.5
(0.138) 3.5
(0.138) 248.27
X7343-43 7.3 ±0.3
(0.287 ±0.012) 4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012) 2.4
(0.094) 1.3 (0.051)
±0.3 (0.012) 0.5
(0.020) 0.10 ±0.10
(0.004 ±0.004) 1.7
(0.067) 1.0
(0.039) 0.13
(0.005) 3.6
(0.142) 3.5
(0.138) 3.5
(0.138) 652.04
E7360-38 7.3 ±0.3
(0.287 ±0.012)
6.0 ±0.3
(0.236
±0.012)
3.6 ±0.2
(0.142 ±0.008) 4.1
(0.161) 1.3 (0.051)
±0.3 (0.012) 0.5
(0.020) 0.10 ±0.10
(0.004 ±0.004) N/A N/A 0.13
(0.005) 3.6
(0.142) 3.5
(0.138) 3.5
(0.138) 803.76
T3528-12 3.5 ±0.2
(0.138 ±0.008) 2.8 ±0.2
(0.110 ±0.008)
1.2
(0.047) 2.2
(0.087)
0.80 (0.032)
+0.1(0.004)
/−0.3(0.011)
N/A 0.05
(0.002) N/A N/A 0.13
(0.005) 1.9
(0.075) 1.8
(0.071) 2.2
(0.087) 63.89
V7343-20 7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.0
(0.079)
2.4
(0.094)
1.3 (0.051)
±0.3 (0.012)
N/A 0.05
(0.002)
N/A N/A 0.13
(0.005)
3.6
(0.142)
3.5
(0.138)
3.5
(0.138)
286.40
Notes: (Ref) – Dimensions provided for reference only. For low prole cases, no dimensions are provided for B, P or R because these cases do not have a bevel or
a notch.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
5
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
2.5 220 D/7343-31 T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 125 1
2.5 470 D/7343-31 T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 125 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 125 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 125 1
46.8 A/3216-18 T495A685(1)004A(2)E2K0 0.5 6.0 2000 194 175 78 125 1
422 C/6032-28 T495C226(1)004A(2)E2K4 0.9 6.0 2400 214 193 86 125 1
422 C/6032-28 T495C226(1)004A(2)E380 0.9 6.0 380 538 484 215 125 1
433 T/3528-12 T495T336(1)004A(2)E1K2 1.3 8.0 1200 242 218 97 125 1
468 T/3528-12 T495T686(1)004A(2)E1K5 2.7 20.0 1500 216 194 86 125 1
468 V/7343-20 T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 125 1
4100 B/3528-21 T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 125 1
4100 D/7343-31 T495D107(1)004A(2)E800 4.0 6.0 800 433 390 173 125 1
4150 B/3528-21 T495B157(M)004A(2)E900 6.0 12.0 900 307 276 123 125 1
4150 C/6032-28 T495C157(1)004A(2)E070 6.0 12.0 70 1254 1129 502 125 1
4150 C/6032-28 T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 125 1
4150 U/6032-15 T495U157(1)004A(2)E200 6.0 8.0 200 671 604 268 125 1
4220 D/7343-31 T495D227(1)004A(2)E040 8.8 8.0 40 1936 1742 774 125 1
4220 D/7343-31 T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 125 1
4220 D/7343-31 T495D227(1)004A(2)E100 8.8 8.0 100 1225 1103 490 125 1
4330 C/6032-28 T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 125 1
4330 C/6032-28 T495C337(1)004A(2)E700 13.2 12.0 700 396 356 158 125 1
4330 D/7343-31 T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 125 1
4330 D/7343-31 T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 125 1
4330 D/7343-31 T495D337(1)004A(2)E100 13.2 8.0 100 1225 1103 490 125 1
4470 D/7343-31 T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 125 1
4470 D/7343-31 T495D477(1)004A(2)E100 18.8 12.0 100 1225 1103 490 125 1
4470 X/7343-43 T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 125 1
4470 X/7343-43 T495X477(1)004A(2)E045 18.8 8.0 45 1915 1724 766 125 1
4470 X/7343-43 T495X477(1)004A(2)E060 18.8 10.0 60 1658 1492 663 125 1
4470 X/7343-43 T495X477(1)004A(2)E100 18.8 8.0 100 1285 1157 514 125 1
4680 X/7343-43 T495X687(1)004A(2)E040 27.2 10.0 40 2031 1828 812 125 1
4680 X/7343-43 T495X687(1)004A(2)E060 27.2 10.0 60 1658 1492 663 125 1
4680 X/7343-43 T495X687(1)004A(2)E100 27.2 10.0 100 1285 1157 514 125 1
41000 X/7343-43 T495X108(1)004A(2)E030 40.0 10.0 30 2345 2111 938 125 1
41000 X/7343-43 T495X108(1)004A(2)E040 40.0 10.0 40 2031 1828 812 125 1
41000 X/7343-43 T495X108(1)004A(2)E060 40.0 10.0 60 1658 1492 663 125 1
41000 X/7343-43 T495X108(1)004A(2)E070 40.0 10.0 70 1535 1382 614 125 1
41000 X/7343-43 T495X108(1)004A(2)E090 40.0 10.0 90 1354 1219 542 125 1
41000 X/7343-43 T495X108(1)004A(2)E100 40.0 10.0 100 1285 1157 514 125 1
41000 E/7360-38 T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 125 1
41000 E/7360-38 T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 125 1
6.3 2.2 A/3216-18 T495A225(1)006ATE5K0 0.5 6.0 5000 122 110 49 125 1
6.3 3.3 A/3216-18 T495A335(1)006ATE3K0 0.5 6.0 3000 158 142 63 125 1
6.3 6.8 A/3216-18 T495A685(1)006ATE1K8 0.5 6.0 1800 204 184 82 125 1
6.3 6.8 A/3216-18 T495A685(1)006ATE2K0 0.5 6.0 2000 194 175 78 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
6
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
6.3 6.8 A/3216-18 T495A685(1)006A(2)E4K5 0.5 6.0 4500 129 116 52 125 1
6.3 6.8 C/6032-28 T495C685(1)006A(2)E480 0.5 6.0 480 479 431 192 125 1
6.3 10 A/3216-18 T495A106(1)006A(2)E800 0.6 6.0 800 306 275 122 125 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K0 0.6 6.0 1000 274 247 110 125 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K5 0.6 6.0 1500 224 202 90 125 1
6.3 10 A/3216-18 T495A106(1)006A(2)E2K0 0.6 6.0 2000 194 175 78 125 1
6.3 10 B/3528-21 T495B106(1)006A(2)E1K0 0.6 6.0 1000 292 263 117 125 1
6.3 10 T/3528-12 T495T106(1)006A(2)E1K2 0.6 6.0 1200 242 218 97 125 1
6.3 15 A/3216-18 T495A156(1)006A(2)E2K0 0.9 6.0 2000 194 175 78 125 1
6.3 15 T/3528-12 T495T156(1)006A(2)E1K0 0.9 6.0 1000 265 239 106 125 1
6.3 22 A/3216-18 T495A226(1)006A(2)E500 1.4 6.0 500 387 348 155 125 1
6.3 22 A/3216-18 T495A226(1)006A(2)E900 1.4 8.0 900 289 260 116 125 1
6.3 22 A/3216-18 T495A226(1)006A(2)E1K5 1.4 8.0 1500 224 202 90 125 1
6.3 22 B/3528-21 T495B226(1)006A(2)E500 1.4 6.0 500 412 371 165 125 1
6.3 22 C/6032-28 T495C226(1)006A(2)E380 1.4 6.0 380 538 484 215 125 1
6.3 33 A/3216-18 T495A336(1)006A(2)E600 2.1 12.0 600 354 319 142 125 1
6.3 33 B/3528-21 T495B336(1)006A(2)E600 2.1 6.0 600 376 338 150 125 1
6.3 33 T/3528-12 T495T336(1)006A(2)E800 2.1 6.0 800 296 266 118 125 1
6.3 33 C/6032-28 T495C336(1)006A(2)E350 2.1 6.0 350 561 505 224 125 1
6.3 47 B/3528-21 T495B476(1)006A(2)E250 3.0 6.0 250 583 525 233 125 1
6.3 47 B/3528-21 T495B476(1)006A(2)E400 3.0 6.0 400 461 415 184 125 1
6.3 47 B/3528-21 T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 125 1
6.3 47 B/3528-21 T495B476(1)006A(2)E500 3.0 6.0 500 583 525 233 125 1
6.3 47 C/6032-28 T495C476(1)006A(2)E250 3.0 6.0 250 663 597 265 125 1
6.3 47 C/6032-28 T495C476(1)006A(2)E300 3.0 6.0 300 606 545 242 125 1
6.3 47 C/6032-28 T495C476(1)006A(2)E330 3.0 6.0 330 577 519 231 125 1
6.3 47 V/7343-20 T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 125 1
6.3 68 B/3528-21 T495B686(1)006A(2)E500 4.3 8.0 500 412 371 165 125 1
6.3 68 C/6032-28 T495C686(1)006A(2)E400 4.3 6.0 400 524 472 210 125 1
6.3 68 U/6032-15 T495U686(1)006A(2)E400 4.3 6.0 400 474 427 190 125 1
6.3 68 D/7343-31 T495D686(1)006A(2)E175 4.3 4.0 175 926 833 370 125 1
6.3 68 D/7343-31 T495D686(1)006A(2)E180 4.3 4.0 180 913 822 365 125 1
6.3 100 B/3528-21 T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 125 1
6.3 100 B/3528-21 T495B107(M)006A(2)E700 6.3 15.0 700 348 313 139 125 1
6.3 100 M/3528-15 T495M107(1)006A(2)E500 6.3 20.0 500 490 441 196 125 1
6.3 100 M/3528-15 T495M107(1)006A(2)E1K0 6.3 20.0 1000 346 311 138 125 1
6.3 100 C/6032-28 T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 125 1
6.3 100 C/6032-28 T495C107(1)006A(2)E150 6.3 8.0 150 856 770 342 125 1
6.3 100 D/7343-31 T495D107(1)006A(2)E050 6.3 6.0 50 1732 1559 693 125 1
6.3 100 D/7343-31 T495D107(1)006A(2)E130 6.3 6.0 130 1074 967 430 125 1
6.3 100 D/7343-31 T495D107(1)006A(2)E150 6.3 8.0 150 1000 900 400 125 1
6.3 100 D/7343-31 T495D107(1)006A(2)E800 6.3 6.0 800 433 390 173 125 1
6.3 100 V/7343-20 T495V107(1)006A(2)E090 6.3 8.0 90 1179 1061 472 125 1
6.3 100 V/7343-20 T495V107(1)006A(2)E150 6.3 8.0 150 913 822 365 125 1
6.3 150 C/6032-28 T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
7
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
6.3 150 C/6032-28 T495C157(M)006A(2)E200 9.5 8.0 200 742 668 297 125 1
6.3 150 U/6032-15 T495U157(1)006A(2)E200 9.5 8.0 200 671 604 268 125 1
6.3 150 V/7343-20 T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 125 1
6.3 150 V/7343-20 T495V157(1)006A(2)E070 9.5 8.0 70 1336 1202 534 125 1
6.3 150 V/7343-20 T495V157(1)006A(2)E150 9.5 8.0 150 913 822 365 125 1
6.3 150 D/7343-31 T495D157(1)006A(2)E050 9.5 6.0 50 1732 1559 693 125 1
6.3 150 D/7343-31 T495D157(1)006A(2)E065 9.5 6.0 65 1519 1367 608 125 1
6.3 150 D/7343-31 T495D157(1)006A(2)E080 9.5 6.0 80 1369 1232 548 125 1
6.3 150 D/7343-31 T495D157(1)006A(2)E100 9.5 6.0 100 1225 1103 490 125 1
6.3 150 D/7343-31 T495D157(1)006A(2)E125 9.5 6.0 125 1095 986 438 125 1
6.3 150 X/7343-43 T495X157(1)006A(2)E100 9.5 6.0 100 1285 1157 514 125 1
6.3 220 C/6032-28 T495C227(1)006A(2)E225 13.9 10.0 225 699 629 280 125 1
6.3 220 C/6032-28 T495C227(1)006A(2)E200 13.9 10.0 200 742 668 297 125 1
6.3 220 C/6032-28 T495C227(1)006A(2)E100 13.9 10.0 100 1049 944 420 125 1
6.3 220 D/7343-31 T495D227(1)006A(2)E045 13.9 8.0 45 1826 1643 730 125 1
6.3 220 D/7343-31 T495D227(1)006A(2)E050 13.9 8.0 50 1732 1559 693 125 1
6.3 220 D/7343-31 T495D227(1)006A(2)E100 13.9 8.0 100 1225 1103 490 125 1
6.3 220 W/7343-15 T495W227(1)006A(2)E250 13.9 8.0 250 849 764 340 125 1
6.3 220 X/7343-43 T495X227(1)006A(2)E070 13.9 8.0 70 1535 1382 614 125 1
6.3 220 X/7343-43 T495X227(1)006A(2)E080 13.9 8.0 80 1436 1292 574 125 1
6.3 220 X/7343-43 T495X227(1)006A(2)E100 13.9 8.0 100 1285 1157 514 125 1
6.3 220 V/7343-20 T495V227(1)006ATE150 13.9 8.0 150 913 822 365 125 1
6.3 330 C/6032-28 T495C337(1)006A(2)E200 20.8 18.0 200 742 668 297 125 1
6.3 330 D/7343-31 T495D337(1)006A(2)E040 20.8 8.0 40 1936 1742 774 125 1
6.3 330 D/7343-31 T495D337(1)006A(2)E045 20.8 8.0 45 1826 1643 730 125 1
6.3 330 D/7343-31 T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 125 1
6.3 330 D/7343-31 T495D337(1)006A(2)E070 20.8 8.0 70 1464 1318 586 125 1
6.3 330 D/7343-31 T495D337(1)006A(2)E100 20.8 8.0 100 1225 1103 490 125 1
6.3 330 V/7343-20 T495V337(1)006A(2)E150 20.8 8.0 150 913 822 365 125 1
6.3 330 X/7343-43 T495X337(1)006A(2)E045 20.8 8.0 45 1915 1724 766 125 1
6.3 330 X/7343-43 T495X337(1)006A(2)E050 20.8 8.0 50 1817 1635 727 125 1
6.3 330 X/7343-43 T495X337(1)006A(2)E065 20.8 8.0 65 1593 1434 637 125 1
6.3 330 X/7343-43 T495X337(1)006A(2)E080 20.8 8.0 80 1436 1292 574 125 1
6.3 330 X/7343-43 T495X337(1)006A(2)E100 20.8 8.0 100 1285 1157 514 125 1
6.3 330 E/7360-38 T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 125 1
6.3 330 E/7360-38 T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 125 1
6.3 470 D/7343-31 T495D477(1)006A(2)E045 29.6 12.0 45 1826 1643 730 125 1
6.3 470 D/7343-31 T495D477(1)006A(2)E100 29.6 12.0 100 1225 1103 490 125 1
6.3 470 D/7343-31 T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 125 1
6.3 470 D/7343-31 T495D477(1)006A(2)E150 29.6 12.0 150 1000 900 400 125 1
6.3 470 V/7343-20 T495V477(1)006A(2)E150 29.6 15.0 150 913 822 365 125 1
6.3 470 X/7343-43 T495X477(1)006A(2)E030 29.6 10.0 30 2345 2111 938 125 1
6.3 470 X/7343-43 T495X477(1)006A(2)E045 29.6 10.0 45 1915 1724 766 125 1
6.3 470 X/7343-43 T495X477(1)006A(2)E050 29.6 10.0 50 1817 1635 727 125 1
6.3 470 X/7343-43 T495X477(1)006A(2)E060 29.6 10.0 60 1658 1492 663 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
8
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
6.3 470 X/7343-43 T495X477(1)006A(2)E065 29.6 10.0 65 1593 1434 637 125 1
6.3 470 X/7343-43 T495X477(1)006A(2)E100 29.6 10.0 100 1285 1157 514 125 1
6.3 470 X/7343-43 T495X477(1)006A(2)E125 29.6 10.0 125 1149 1034 460 125 1
6.3 470 E/7360-38 T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 125 1
6.3 470 E/7360-38 T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 125 1
6.3 470 E/7360-38 T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 125 1
6.3 680 X/7343-43 T495X687(1)006A(2)E100 42.8 12.0 100 1285 1157 514 125 1
6.3 680 X/7343-43 T495X687(1)006A(2)E060 42.8 12.0 60 1658 1492 663 125 1
6.3 680 X/7343-43 T495X687(1)006A(2)E045 42.8 12.0 45 1915 1724 766 125 1
6.3 1000 X/7343-43 T495X108(1)006A(2)E100 63.0 20.0 100 1285 1157 514 125 1
6.3 1000 E/7360-38 T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 125 1
6.3 1000 E/7360-38 T495E108(1)006A(2)E040 63.0 15.0 40 2236 2012 894 125 1
10 2.2 A/3216-18 T495A225(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 125 1
10 2.2 A/3216-18 T495A225(1)010A(2)E7K0 0.5 6.0 7000 104 94 42 125 1
10 3.3 A/3216-18 T495A335(1)010A(2)E2K0 0.5 6.0 2000 194 175 78 125 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K2 0.5 6.0 1200 250 225 100 125 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K3 0.5 6.0 1300 240 216 96 125 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K4 0.5 6.0 1400 231 208 92 125 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 125 1
10 4.7 A/3216-18 T495A475(1)010A(2)E2K0 0.5 6.0 2000 194 175 78 125 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K3 0.5 15.0 1300 256 230 102 125 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K5 0.5 6.0 1500 238 214 95 125 1
10 6.8 A/3216-18 T495A685(1)010A(2)E1K8 0.7 6.0 1800 204 184 82 125 1
10 6.8 B/3528-21 T495B685(1)010A(2)E900 0.7 6.0 900 307 276 123 125 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K1 0.7 6.0 1100 278 250 111 125 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K2 0.7 6.0 1200 266 239 106 125 1
10 10 A/3216-18 T495A106(1)010A(2)E1K8 1.0 6.0 1800 204 184 82 125 1
10 10 A/3216-18 T495A106(1)010A(2) E2K0 1.0 6.0 2000 194 175 78 125 1
10 10 A/3216-18 T495A106(1)010A(2) E2K5 1.0 6.0 2500 173 156 69 125 1
10 10 A/3216-18 T495A106(1)010A(2) E3K8 1.0 6.0 3800 140 126 56 125 1
10 10 B/3528-21 T495B106(1)010A(2) E600 1.0 6.0 600 376 338 150 125 1
10 10 B/3528-21 T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 125 1
10 10 B/3528-21 T495B106(1)010A(2) E1K2 1.0 6.0 1200 266 239 106 125 1
10 10 B/3528-21 T495B106(1)010A(2)E3K0 1.0 6.0 3000 168 151 67 125 1
10 10 C/6032-28 T495C106(1)010AT E400 1.0 6.0 400 524 472 210 125 1
10 10 T/3528-12 T495T106(1)010AT E1K5 1.0 6.0 1500 216 194 86 125 1
10 15 A/3216-18 T495A156(1)010AT E1K0 1.5 6.0 1000 274 247 110 125 1
10 15 A/3216-18 T495A156(1)010AT E1K8 1.5 6.0 1800 204 184 82 125 1
10 15 B/3528-21 T495B156(1)010AT E600 1.5 6.0 600 376 338 150 125 1
10 15 B/3528-21 T495B156(1)010AT E900 1.5 6.0 900 307 276 123 125 1
10 15 T/3528-12 T495T156(1)010AT E1K2 1.5 6.0 1200 242 218 97 125 1
10 15 B/3528-21 T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 125 1
10 15 C/6032-28 T495C156(1)010A(2)E375 1.5 6.0 375 542 488 217 125 1
10 15 C/6032-28 T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 125 1
10 15 C/6032-28 T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
9
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
10 22 A/3216-18 T495A226(1)010AT E1K2 2.2 8.0 1200 250 225 100 125 1
10 22 A/3216-18 T495A226(1)010AT E1K5 2.2 8.0 1500 224 202 90 125 1
10 22 B/3528-21 T495B226(1)010AT E400 2.2 6.0 400 461 415 184 125 1
10 22 B/3528-21 T495B226(1)010AT E500 2.2 6.0 500 412 371 165 125 1
10 22 B/3528-21 T495B226(1)010AT E700 2.2 6.0 700 348 313 139 125 1
10 22 B/3528-21 T495B226(1)010AT E800 2.2 6.0 800 326 293 130 125 1
10 22 B/3528-21 T495B226(1)010A(2)E2K3 2.2 6.0 2300 192 173 77 125 1
10 22 C/6032-28 T495C226(1)010A(2)E200 2.2 6.0 200 742 668 297 125 1
10 22 C/6032-28 T495C226(1)010A(2)E245 2.2 6.0 245 670 603 268 125 1
10 22 C/6032-28 T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 125 1
10 22 C/6032-28 T495C226(1)010A(2)E300 2.2 6.0 300 606 545 242 125 1
10 22 C/6032-28 T495C226(1)010A(2)E345 2.2 6.0 345 565 509 226 125 1
10 22 C/6032-28 T495C226(1)010A(2)E350 2.2 6.0 350 561 505 224 125 1
10 22 C/6032-28 T495C226(1)010A(2)E380 2.2 6.0 380 538 484 215 125 1
10 33 B/3528-21 T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 125 1
10 33 B/3528-21 T495B336(1)010A(2)E550 3.3 6.0 550 393 354 157 125 1
10 33 B/3528-21 T495B336(1)010A(2)E650 3.3 6.0 650 362 326 145 125 1
10 33 V/7343-20 T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 125 1
10 33 V/7343-20 T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 125 1
10 47 B/3528-21 T495B476(1)010A(2)E500 4.7 6.0 500 412 371 165 125 1
10 47 B/3528-21 T495B476(1)010A(2)E650 4.7 6.0 650 362 326 145 125 1
10 47 C/6032-28 T495C476(1)010A(2)E300 4.7 6.0 300 606 545 242 125 1
10 47 U/6032-15 T495U476(1)010A(2)E400 4.7 6.0 400 474 427 190 125 1
10 47 D/7343-31 T495D476(1)010A(2)E080 4.7 4.0 80 1369 1232 548 125 1
10 47 D/7343-31 T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 125 1
10 47 D/7343-31 T495D476(1)010A(2)E100 4.7 6.0 100 1225 1103 490 125 1
10 47 D/7343-31 T495D476(1)010A(2)E200 4.7 4.0 200 866 779 346 125 1
10 47 V/7343-20 T495V476(1)010A(2)E200 4.7 6.0 200 791 712 316 125 1
10 68 B/3528-21 T495B686(1)010A(2)E600 6.8 8.0 600 376 338 150 125 1
10 68 B/3528-21 T495B686(1)010A(2)E750 6.8 8.0 750 337 303 135 125 1
10 68 B/3528-21 T495B686(M)010A(2)E900 6.8 8.0 900 307 276 123 125 1
10 68 C/6032-28 T495C686(1)010A(2)E080 6.8 6.0 80 1173 1056 469 125 1
10 68 C/6032-28 T495C686(1)010A(2)E200 6.8 6.0 200 742 668 297 125 1
10 68 C/6032-28 T495C686(1)010A(2)E225 6.8 6.0 225 699 629 280 125 1
10 68 C/6032-28 T495C686(1)010A(2)E250 6.8 6.0 250 663 597 265 125 1
10 68 V/7343-20 T495V686(1)010A(2)E070 6.8 6.0 70 1336 1202 534 125 1
10 68 V/7343-20 T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 125 1
10 68 V/7343-20 T495V686(1)010A(2)E140 6.8 6.0 140 945 851 378 125 1
10 68 V/7343-20 T495V686(1)010A(2)E200 6.8 6.0 200 791 712 316 125 1
10 68 D/7343-31 T495D686(1)010A(2)E070 6.8 6.0 70 1464 1318 586 125 1
10 68 D/7343-31 T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 125 1
10 68 D/7343-31 T495D686(1)010A(2)E100 6.8 6.0 100 1225 1103 490 125 1
10 68 D/7343-31 T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 125 1
10 68 X/7343-43 T495X686(1)010A(2)E150 6.8 4.0 150 1049 944 420 125 1
10 100 B/3528-21 T495B107(M)010A(2)E350 10.0 12.0 350 493 444 197 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
10
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
10 100 B/3528-21 T495B107(M)010A(2)E500 10.0 30.0 500 412 371 165 125 1
10 100 B/3528-21 T495B107(M)010A(2)E700 10.0 30.0 700 348 313 139 125 1
10 100 C/6032-28 T495C107(1)010A(2)E100 10.0 8.0 100 1050 945 420 125 1
10 100 C/6032-28 T495C107(1)010A(2)E150 10.0 8.0 150 856 812 542 125 1
10 100 C/6032-28 T495C107(1)010A(2)E180 10.0 8.0 180 782 704 313 125 1
10 100 C/6032-28 T495C107(1)010A(2)E200 10.0 8.0 200 742 668 297 125 1
10 100 C/6032-28 T495C107(1)010A(2)E250 10.0 8.0 250 663 597 265 125 1
10 100 U/6032-15 T495U107(1)010A(2)E150 10.0 8.0 150 775 698 310 125 1
10 100 W/7343-15 T495W107(1)010A(2)E200 10.0 8.0 200 949 854 380 125 1
10 100 V/7343-20 T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 125 1
10 100 V/7343-20 T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 125 1
10 100 V/7343-20 T495V107(1)010A(2)E200 10.0 8.0 200 791 712 316 125 1
10 100 D/7343-31 T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 125 1
10 100 D/7343-31 T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 125 1
10 100 D/7343-31 T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 125 1
10 100 D/7343-31 T495D107(1)010A(2)E100 10.0 8.0 100 1225 1103 490 125 1
10 100 D/7343-31 T495D107(1)010A(2)E120 10.0 8.0 120 1118 1006 447 125 1
10 100 D/7343-31 T495D107(1)010A(2)E125 10.0 8.0 125 1095 986 438 125 1
10 100 X/7343-43 T495X107(1)010A(2)E100 10.0 6.0 100 1285 1157 514 125 1
10 150 C/6032-28 T495C157(1)010A(2)E200 15.0 10.0 200 742 668 297 125 1
10 150 V/7343-20 T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 125 1
10 150 V/7343-20 T495V157(1)010A(2)E150 15.0 8.0 150 913 822 365 125 1
10 150 V/7343-20 T495V157(1)010A(2)E200 15.0 8.0 200 791 712 316 125 1
10 150 D/7343-31 T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 125 1
10 150 D/7343-31 T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 125 1
10 150 D/7343-31 T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 125 1
10 150 D/7343-31 T495D157(1)010A(2)E100 15.0 8.0 100 1225 1103 490 125 1
10 150 X/7343-43 T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 125 1
10 150 X/7343-43 T495X157(1)010A(2)E080 15.0 8.0 80 1436 1292 574 125 1
10 150 X/7343-43 T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 125 1
10 150 X/7343-43 T495X157(1)010A(2)E100 15.0 8.0 100 1285 1157 514 125 1
10 220 D/7343-31 T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 125 1
10 220 D/7343-31 T495D227(1)010A(2)E050 22.0 9.0 50 1732 1559 693 125 1
10 220 D/7343-31 T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 125 1
10 220 D/7343-31 T495D227(1)010A(2)E100 22.0 8.0 100 1225 1103 490 125 1
10 220 D/7343-31 T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 125 1
10 220 V/7343-20 T495V227(1)010A(2)E150 22.0 10.0 150 913 822 365 125 1
10 220 V/7343-20 T495V227(1)010A(2)E200 22.0 10.0 200 791 712 316 125 1
10 220 X/7343-43 T495X227(1)010A(2)E045 22.0 8.0 45 1915 1724 766 125 1
10 220 X/7343-43 T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 125 1
10 220 X/7343-43 T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 125 1
10 220 X/7343-43 T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 125 1
10 220 X/7343-43 T495X227(1)010A(2)E080 22.0 8.0 80 1436 1292 574 125 1
10 220 X/7343-43 T495X227(1)010A(2)E100 22.0 8.0 100 1285 1157 514 125 1
10 330 D/7343-31 T495D337(1)010A(2)E100 33.0 8.0 100 1225 1103 490 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
11
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
10 330 D/7343-31 T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 125 1
10 330 D/7343-31 T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 125 1
10 330 X/7343-43 T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 125 1
10 330 X/7343-43 T495X337(1)010A(2)E040 33.0 10.0 40 2031 1828 812 125 1
10 330 X/7343-43 T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 125 1
10 330 X/7343-43 T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 125 1
10 330 X/7343-43 T495X337(1)010A(2)E080 33.0 10.0 80 1436 1292 574 125 1
10 330 X/7343-43 T495X337(1)010A(2)E100 33.0 10.0 100 1285 1157 514 125 1
10 330 E/7360-38 T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 125 1
10 330 E/7360-38 T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 125 1
10 330 E/7360-38 T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 125 1
10 470 X/7343-43 T495X477(1)010A(2)E045 47.0 10.0 45 1915 1724 766 125 1
10 470 X/7343-43 T495X477(1)010A(2)E050 47.0 10.0 50 1817 1635 727 125 1
10 470 X/7343-43 T495X477(1)010A(2)E060 47.0 10.0 60 1658 1492 663 125 1
10 470 X/7343-43 T495X477(1)010A(2)E080 47.0 10.0 80 1436 1292 574 125 1
10 470 X/7343-43 T495X477(1)010A(2)E100 47.0 10.0 100 1285 1157 514 125 1
10 470 X/7343-43 T495X477(1)010A(2)E200 47.0 10.0 200 908 817 363 125 1
10 470 E/7360-38 T495E477(1)010A(2)E040 47.0 10.0 40 2236 2012 894 125 1
10 470 E/7360-38 T495E477(1)010A(2)E060 47.0 10.0 60 1826 1643 730 125 1
10 470 E/7360-38 T495E477(1)010A(2)E100 47.0 10.0 100 1414 1273 566 125 1
16 1.0 A/3216-18 T495A105(1)016A(2)E5K0 0.5 6.0 5000 122 110 49 125 1
16 1.5 A/3216-18 T495A155(1)016A(2)E5K0 0.5 6.0 5000 122 110 49 125 1
16 2.2 A/3216-18 T495A225(1)016A(2)E2K5 0.5 6.0 2500 173 156 69 125 1
16 2.2 A/3216-18 T495A225(1)016A(2)E1K8 0.5 6.0 1800 204 184 82 125 1
16 3.3 A/3216-18 T495A335(1)016A(2)E3K0 0.5 6.0 3000 158 142 63 125 1
16 3.3 B/3528-21 T495B335(1)016A(2)E2K0 0.5 6.0 2000 206 185 82 125 1
16 4.7 A/3216-18 T495A475(1)016A(2)E2K0 0.8 6.0 2000 194 175 78 125 1
16 4.7 B/3528-21 T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 125 1
16 4.7 B/3528-21 T495B475(1)016A(2)E800 0.8 6.0 800 326 293 130 125 1
16 4.7 B/3528-21 T495B475(1)016A(2)E1K0 0.8 6.0 1000 292 263 117 125 1
16 4.7 B/3528-21 T495B475(1)016A(2)E1K5 0.8 6.0 1500 238 214 95 125 1
16 6.8 B/3528-21 T495B685(1)016A(2)E1K2 1.1 6.0 1200 266 239 106 125 1
16 6.8 C/6032-28 T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 125 1
16 10 A/3216-18 T495A106(1)016A(2)E1K7 1.6 6.0 1700 210 189 84 125 1
16 10 B/3528-21 T495B106(1)016A(2)E500 1.6 6.0 500 412 371 165 125 1
16 10 B/3528-21 T495B106(1)016A(2)E650 1.6 6.0 650 362 326 145 125 1
16 10 B/3528-21 T495B106(1)016A(2)E800 1.6 6.0 800 326 293 130 125 1
16 10 B/3528-21 T495B106(1)016A(2)E2K5 1.6 6.0 2500 184 166 74 125 1
16 10 T/3528-12 T495T106(M)016A(2)E4K0 1.6 8.0 4000 132 119 53 125 1
16 15 A/3216-18 T495A156(1)016A(2)E2K5 2.4 8.0 2500 173 156 69 125 1
16 15 B/3528-21 T495B156(1)016A(2)E500 2.4 6.0 500 412 371 165 125 1
16 15 B/3528-21 T495B156(1)016A(2)E650 2.4 6.0 650 362 326 145 125 1
16 15 B/3528-21 T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 125 1
16 15 C/6032-28 T495C156(1)016A(2)E400 2.4 6.0 400 524 472 210 125 1
16 22 B/3528-21 T495B226(1)016A(2)E600 3.5 6.0 600 376 338 150 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
12
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
16 22 B/3528-21 T495B226(1)016A(2)E700 3.5 6.0 700 348 313 139 125 1
16 22 C/6032-28 T495C226(1)016A(2)E300 3.5 6.0 300 606 545 242 125 1
16 22 C/6032-28 T495C226(1)016A(2)E350 3.5 6.0 350 561 505 224 125 1
16 22 C/6032-28 T495C226(1)016A(2)E500 3.5 6.0 500 469 422 188 125 1
16 33 C/6032-28 T495C336(1)016A(2)E200 5.3 6.0 200 742 668 297 125 1
16 33 C/6032-28 T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 125 1
16 33 C/6032-28 T495C336(1)016A(2)E230 5.3 6.0 230 692 623 277 125 1
16 33 C/6032-28 T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 125 1
16 33 C/6032-28 T495C336(1)016A(2)E300 5.3 6.0 300 606 545 242 125 1
16 33 U/6032-15 T495U336(1)016A(2)E200 5.3 6.0 200 671 604 268 125 1
16 33 U/6032-15 T495U336(1)016A(2)E400 5.3 6.0 400 474 427 190 125 1
16 33 B/3528-21 T495B336(1)016A(2)E350 5.3 6.0 350 493 444 197 125 1
16 33 D/7343-31 T495D336(1)016A(2)E150 5.3 6.0 150 1000 900 400 125 1
16 33 D/7343-31 T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 125 1
16 33 D/7343-31 T495D336(1)016A(2)E200 5.3 6.0 200 866 779 346 125 1
16 33 D/7343-31 T495D336(1)016A(2)E225 5.3 4.0 225 816 734 326 125 1
16 33 D/7343-31 T495D336(1)016A(2)E250 5.3 6.0 250 775 698 310 125 1
16 47 C/6032-28 T495C476(1)016A(2)E300 7.5 6.0 300 606 545 242 125 1
16 47 C/6032-28 T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 125 1
16 47 D/7343-31 T495D476(1)016A(2)E080 7.5 6.0 80 1369 1232 548 125 1
16 47 D/7343-31 T495D476(1)016A(2)E100 7.5 6.0 100 1225 1103 490 125 1
16 47 D/7343-31 T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 125 1
16 47 D/7343-31 T495D476(1)016A(2)E180 7.5 6.0 180 913 822 365 125 1
16 47 D/7343-31 T495D476(1)016A(2)E800 7.5 6.0 800 433 390 173 125 1
16 68 C/6032-28 T495C686(1)016A(2)E250 10.9 6.0 250 663 597 265 125 1
16 68 C/6032-28 T495C686(1)016A(2)E200 10.9 6.0 200 742 668 297 125 1
16 68 C/6032-28 T495C686(1)016A(2)E180 10.9 6.0 180 782 704 313 125 1
16 68 V/7343-20 T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 125 1
16 68 V/7343-20 T495V686(1)016A(2)E250 10.9 6.0 250 707 636 283 125 1
16 68 V/7343-20 T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 125 1
16 68 D/7343-31 T495D686(1)016A(2)E070 10.9 6.0 70 1464 1318 586 125 1
16 68 D/7343-31 T495D686(1)016A(2)E100 10.9 6.0 100 1225 1103 490 125 1
16 68 D/7343-31 T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 125 1
16 68 X/7343-43 T495X686(1)016A(2)E150 10.9 5.0 150 1049 944 420 125 1
16 100 C/6032-28 T495C107(1)016A(2)E200 16.0 10.0 200 742 668 297 125 1
16 100 D/7343-31 T495D107(1)016A(2)E060 16.0 8.0 60 1581 1423 632 125 1
16 100 D/7343-31 T495D107(1)016A(2)E100 16.0 8.0 100 1225 1103 490 125 1
16 100 D/7343-31 T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 125 1
16 100 D/7343-31 T495D107(1)016A(2)E130 16.0 8.0 130 1074 967 430 125 1
16 100 D/7343-31 T495D107(1)016A(2)E150 16.0 8.0 150 1000 900 400 125 1
16 100 D/7343-31 T495D107(1)016A(2)E800 16.0 8.0 800 433 390 173 125 1
16 100 X/7343-43 T495X107(1)016A(2)E080 16.0 8.0 80 1436 1292 574 125 1
16 100 X/7343-43 T495X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 125 1
16 150 B/3528-21 T495B157(1)016A(2)E800 24.0 6.0 800 326 293 130 125 1
16 150 D/7343-31 T495D157(M)016A(2)E060 24.0 12.0 60 1581 1423 632 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
13
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
16 150 D/7343-31 T495D157(1)016A(2)E085 24.0 8.0 85 1328 1195 531 125 1
16 150 D/7343-31 T495D157(1)016A(2)E100 24.0 8.0 100 1225 1103 490 125 1
16 150 D/7343-31 T495D157(1)016A(2)E125 24.0 8.0 125 1095 986 438 125 1
16 150 D/7343-31 T495D157(1)016A(2)E130 24.0 8.0 130 1074 967 430 125 1
16 150 D/7343-31 T495D157(1)016A(2)E150 24.0 8.0 150 1000 900 400 125 1
16 150 X/7343-43 T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 125 1
16 150 X/7343-43 T495X157(1)016A(2)E100 24.0 8.0 100 1285 1157 514 125 1
16 220 D/7343-31 T495D227(1)016A(2)E150 35.2 12.0 150 1000 900 400 125 1
16 220 D/7343-31 T495D227(1)016A(2)E200 35.2 12.0 200 866 779 346 125 1
16 220 D/7343-31 T495D227(1)016A(2)E220 35.2 12.0 220 826 743 330 125 1
16 220 X/7343-43 T495X227(1)016A(2)E100 35.2 8.0 100 1285 1157 514 125 1
16 220 E/7360-38 T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 125 1
16 220 E/7360-38 T495E227(1)016A(2)E075 35.2 8.0 75 1633 1470 653 125 1
16 220 E/7360-38 T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 125 1
16 220 E/7360-38 T495E227(1)016A(2)E150 35.2 7.2 150 1155 1040 462 125 1
20 1A/3216-18 T495A105(1)020A(2)E3K0 0.5 4.0 3000 158 142 63 125 1
20 1A/3216-18 T495A105(1)020A(2)E5K0 0.5 4.0 5000 122 110 49 125 1
20 2.2 A/3216-18 T495A225(1)020A(2)E3K0 0.5 6.0 3000 158 142 63 125 1
20 4.7 A/3216-18 T495A475(1)020A(2)E1K8 0.9 6.0 1800 204 184 82 125 1
20 4.7 A/3216-18 T495A475(1)020A(2)E2K0 0.9 6.0 2000 194 175 78 125 1
20 4.7 B/3528-21 T495B475(1)020A(2)E750 0.9 6.0 750 337 303 135 125 1
20 4.7 B/3528-21 T495B475(1)020A(2)E1K0 0.9 6.0 1000 292 263 117 125 1
20 6.8 C/6032-28 T495C685(1)020A(2)E480 1.4 6.0 480 479 431 192 125 1
20 10 B/3528-21 T495B106(1)020A(2)E1K0 2.0 6.0 1000 292 263 117 125 1
20 10 B/3528-21 T495B106(1)020A(2)E800 2.0 6.0 800 326 293 130 125 1
20 10 C/6032-28 T495C106(1)020A(2)E300 2.0 6.0 300 606 545 242 125 1
20 10 C/6032-28 T495C106(1)020A(2)E350 2.0 6.0 350 561 505 224 125 1
20 10 C/6032-28 T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 125 1
20 10 C/6032-28 T495C106(1)020A(2)E450 2.0 6.0 450 494 445 198 125 1
20 10 C/6032-28 T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 125 1
20 15 C/6032-28 T495C156(1)020A(2)E375 3.0 6.0 375 542 488 217 125 1
20 15 C/6032-28 T495C156(1)020A(2)E400 3.0 6.0 400 524 472 210 125 1
20 15 D/7343-31 T495D156(1)020A(2)E275 3.0 4.0 275 739 665 296 125 1
20 15 D/7343-31 T495D156(1)020A(2)E1K2 3.0 4.0 1200 354 319 142 125 1
20 22 D/7343-31 T495D226(1)020A(2)E180 4.4 4.0 180 913 822 365 125 1
20 22 D/7343-31 T495D226(1)020A(2)E200 4.4 4.0 200 866 779 346 125 1
20 22 D/7343-31 T495D226(1)020A(2)E225 4.4 4.0 225 816 734 326 125 1
20 22 V/7343-20 T495V226(1)020A(2)E400 4.4 6.0 400 559 503 224 125 1
20 33 C/6032-28 T495C336(1)020A(2)E200 6.6 6.0 200 742 668 297 125 1
20 33 D/7343-31 T495D336(1)020A(2)E100 6.6 6.0 100 1225 1103 490 125 1
20 33 D/7343-31 T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 125 1
20 33 D/7343-31 T495D336(1)020A(2)E200 6.6 6.0 200 866 779 346 125 1
20 33 X/7343-43 T495X336(1)020A(2)E200 6.6 6.0 200 908 817 363 125 1
20 47 D/7343-31 T495D476(1)020A(2)E075 9.4 6.0 75 1414 1273 566 125 1
20 47 D/7343-31 T495D476(1)020A(2)E100 9.4 6.0 100 1225 1103 490 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
14
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
20 47 D/7343-31 T495D476(1)020A(2)E150 9.4 6.0 150 1000 900 400 125 1
20 47 D/7343-31 T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 125 1
20 47 D/7343-31 T495D476(1)020A(2)E200 9.4 6.0 200 866 779 346 125 1
20 47 D/7343-31 T495D476(1)020A(2)E250 9.4 6.0 250 775 698 310 125 1
20 47 X/7343-43 T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 125 1
20 47 X/7343-43 T495X476(1)020A(2)E070 9.4 6.0 70 1535 1382 614 125 1
20 47 X/7343-43 T495X476(1)020A(2)E100 9.4 6.0 100 1285 1157 514 125 1
20 47 X/7343-43 T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 125 1
20 47 X/7343-43 T495X476(1)020A(2)E130 9.4 6.0 130 1127 1014 451 125 1
20 47 X/7343-43 T495X476(1)020A(2)E150 9.4 4.0 150 1049 944 420 125 1
20 68 C/6032-28 T495C686(1)020A(2)E250 13.6 8.0 250 663 597 265 125 1
20 68 D/7343-31 T495D686(1)020A(2)E070 13.6 6.0 70 1464 1318 586 125 1
20 68 D/7343-31 T495D686(1)020A(2)E100 13.6 6.0 100 1225 1103 490 125 1
20 68 D/7343-31 T495D686(1)020A(2)E150 13.6 6.0 150 1000 900 400 125 1
20 68 D/7343-31 T495D686(1)020A(2)E200 13.6 6.0 200 866 779 346 125 1
20 68 D/7343-31 T495D686(1)020A(2)E300 13.6 6.0 300 707 636 283 125 1
20 68 X/7343-43 T495X686(1)020A(2)E120 13.6 6.0 120 1173 1056 469 125 1
20 68 X/7343-43 T495X686(1)020A(2)E130 13.6 6.0 130 1127 1014 451 125 1
20 68 X/7343-43 T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 125 1
20 68 X/7343-43 T495X686(1)020A(2)E200 13.6 6.0 200 908 817 363 125 1
20 100 D/7343-31 T495D107(1)020A(2)E200 20.0 6.0 200 866 779 346 125 1
20 100 X/7343-43 T495X107(1)020A(2)E100 20.0 6.0 100 1285 1157 514 125 1
20 100 X/7343-43 T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 125 1
20 100 E/7360-38 T495E107(1)020A(2)E060 20.0 8.0 60 1826 1643 730 125 1
20 100 E/7360-38 T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 125 1
20 100 E/7360-38 T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 125 1
20 100 E/7360-38 T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 125 1
20 150 E/7360-38 T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 125 1
25 0.47 A/3216-18 T495A474(1)025A(2)E4K5 0.5 4.0 4500 129 116 52 125 1
25 0.47 A/3216-18 T495A474(1)025A(2)E7K0 0.5 4.0 7000 104 94 42 125 1
25 1A/3216-18 T495A105(1)025A(2)E2K5 0.5 4.0 2500 173 156 69 125 1
25 1A/3216-18 T495A105(1)025A(2)E3K0 0.5 4.0 3000 158 142 63 125 1
25 1A/3216-18 T495A105(1)025A(2)E4K0 0.5 4.0 4000 137 123 55 125 1
25 1A/3216-18 T495A105(1)025A(2)E5K0 0.5 4.0 5000 122 110 49 125 1
25 1.5 A/3216-18 T495A155(1)025A(2)E3K0 0.5 6.0 3000 158 142 63 125 1
25 2.2 B/3528-21 T495B225(1)025A(2)E1K2 0.6 4.0 1200 266 239 106 125 1
25 2.2 C/6032-28 T495C225(1)025A(2)E1K3 0.6 6.0 1300 291 262 116 125 1
25 3.3 B/3528-21 T495B335(1)025A(2)E1K2 0.8 6.0 1200 266 239 106 125 1
25 3.3 C/6032-28 T495C335(1)025A(2)E750 0.8 6.0 750 383 345 153 125 1
25 4.7 C/6032-28 T495C475(1)025A(2)E530 1.2 6.0 530 456 410 182 125 1
25 4.7 C/6032-28 T495C475(1)025A(2)E575 1.2 6.0 575 437 393 175 125 1
25 4.7 B/3528-21 T495B475(1)025A(2)E700 1.2 6.0 700 348 313 139 125 1
25 4.7 B/3528-21 T495B475(1)025A(2)E750 1.2 6.0 750 337 303 135 125 1
25 4.7 B/3528-21 T495B475(1)025A(2)E800 1.2 6.0 800 326 293 130 125 1
25 4.7 B/3528-21 T495B475(1)025A(2)E900 1.2 6.0 900 307 276 123 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
15
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
25 4.7 B/3528-21 T495B475(1)025A(2)E1K0 1.2 6.0 1000 292 263 117 125 1
25 6.8 B/3528-21 T495B685(1)025A(2)E1K0 1.7 6.0 1000 292 263 117 125 1
25 6.8 B/3528-21 T495B685(1)025A(2)E1K5 1.7 6.0 1500 238 214 95 125 1
25 6.8 C/6032-28 T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 125 1
25 6.8 C/6032-28 T495C685(1)025A(2)E490 1.7 6.0 490 474 427 190 125 1
25 6.8 C/6032-28 T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 125 1
25 10 B/3528-21 T495B106(1)025A(2)E750 2.5 6.0 750 337 303 135 125 1
25 10 C/6032-28 T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 125 1
25 10 C/6032-28 T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 125 1
25 10 C/6032-28 T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 125 1
25 10 D/7343-31 T495D106(1)025A(2)E1K2 2.5 6.0 1200 354 319 142 125 1
25 15 C/6032-28 T495C156(1)025A(2)E300 3.8 6.0 300 606 545 242 125 1
25 15 D/7343-31 T495D156(1)025A(2)E100 3.8 6.0 100 1225 1103 490 125 1
25 15 D/7343-31 T495D156(1)025A(2)E230 3.8 4.0 230 808 727 323 125 1
25 15 D/7343-31 T495D156(1)025A(2)E275 3.8 6.0 275 739 665 296 125 1
25 15 V/7343-20 T495V156(1)025A(2)E500 3.8 6.0 500 500 450 200 125 1
25 15 X/7343-43 T495X156(1)025A(2)E200 3.8 4.0 200 908 817 363 125 1
25 22 C/6032-28 T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 125 1
25 22 C/6032-28 T495C226(1)025A(2)E280 5.5 6.0 280 627 564 251 125 1
25 22 C/6032-28 T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 125 1
25 22 C/6032-28 T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 125 1
25 22 D/7343-31 T495D226(1)025A(2)E200 5.5 6.0 200 866 779 346 125 1
25 22 D/7343-31 T495D226(1)025A(2)E230 5.5 6.0 230 808 727 323 125 1
25 22 X/7343-43 T495X226(1)025A(2)E225 5.5 4.0 225 856 770 342 125 1
25 33 D/7343-31 T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 125 1
25 33 D/7343-31 T495D336(1)025A(2)E100 8.3 6.0 100 1225 1103 490 125 1
25 33 D/7343-31 T495D336(1)025A(2)E150 8.3 6.0 150 1000 900 400 125 1
25 33 D/7343-31 T495D336(1)025A(2)E200 8.3 6.0 200 866 779 346 125 1
25 33 D/7343-31 T495D336(1)025A(2)E225 8.3 6.0 225 816 734 326 125 1
25 33 D/7343-31 T495D336(1)025A(2)E230 8.3 6.0 230 808 727 323 125 1
25 33 D/7343-31 T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 125 1
25 33 X/7343-43 T495X336(1)025A(2)E100 8.3 4.0 100 1285 1157 514 125 1
25 33 X/7343-43 T495X336(1)025A(2)E175 8.3 4.0 175 971 874 388 125 1
25 33 X/7343-43 T495X336(1)025A(2)E180 8.3 4.0 180 957 861 383 125 1
25 33 X/7343-43 T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 125 1
25 47 X/7343-43 T495X476(1)025A(2)E080 11.8 6.0 80 1436 1292 574 125 1
25 47 X/7343-43 T495X476(1)025A(2)E100 11.8 6.0 100 1285 1157 514 125 1
25 47 X/7343-43 T495X476(1)025A(2)E120 11.8 6.0 120 1173 1056 469 125 1
25 47 X/7343-43 T495X476(1)025A(2)E150 11.8 6.0 150 1049 944 420 125 1
25 47 X/7343-43 T495X476(1)025A(2)E185 11.8 6.0 185 944 850 378 125 1
25 47 X/7343-43 T495X476(1)025A(2)E200 11.8 6.0 200 908 817 363 125 1
25 47 D/7343-31 T495D476(1)025A(2)E100 11.8 6.0 100 1225 1103 490 125 1
25 47 D/7343-31 T495D476(1)025A(2)E120 11.8 6.0 120 1118 1006 447 125 1
25 47 D/7343-31 T495D476(1)025A(2)E130 11.8 6.0 130 1074 967 430 125 1
25 47 D/7343-31 T495D476(1)025A(2)E150 11.8 6.0 150 1000 900 400 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
16
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
25 47 D/7343-31 T495D476(1)025A(2)E250 11.8 6.0 250 775 698 310 125 1
25 68 D/7343-31 T495D686(1)025A(2)E150 17.0 10.0 150 1000 900 400 125 1
25 68 D/7343-31 T495D686(1)025A(2)E200 17.0 10.0 200 866 779 346 125 1
25 68 X/7343-43 T495X686(1)025A(2)E125 17.0 6.0 125 1149 1034 460 125 1
25 68 X/7343-43 T495X686(1)025A(2)E130 17.0 6.0 130 1127 1014 451 125 1
25 68 X/7343-43 T495X686(1)025A(2)E150 17.0 6.0 150 1049 944 420 125 1
25 68 X/7343-43 T495X686(1)025A(2)E200 17.0 6.0 200 908 817 363 125 1
25 100 X/7343-43 T495X107(1)025A(2)E150 25.0 10.0 150 1049 944 420 125 1
25 100 E/7360-38 T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 125 1
35 0.33 A/3216-18 T495A334(1)035A(2)E6K0 0.5 4.0 6000 112 101 45 125 1
35 0.47 A/3216-18 T495A474(1)035A(2)E4K0 0.5 4.0 4000 137 123 55 125 1
35 0.47 B/3528-21 T495B474(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 125 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K2 0.5 4.0 2200 197 177 79 125 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K5 0.5 4.0 2500 184 166 74 125 1
35 0.47 B/3528-21 T495B474(1)035A(2)E11K 0.5 4.0 11000 88 79 35 125 1
35 1A/3216-18 T495A105(1)035A(2)E3K0 0.5 4.0 3000 158 142 63 125 1
35 1B/3528-21 T495B105(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 125 1
35 1B/3528-21 T495B105(1)035A(2)E1K7 0.5 4.0 1700 224 202 90 125 1
35 1B/3528-21 T495B105(1)035A(2)E2K0 0.5 4.0 2000 206 185 82 125 1
35 1B/3528-21 T495B105(1)035A(2)E7K0 0.5 4.0 7000 110 99 44 125 1
35 2.2 B/3528-21 T495B225(1)035A(2)E1K5 0.8 6.0 1500 238 214 95 125 1
35 2.2 B/3528-21 T495B225(1)035A(2)E2K0 0.8 6.0 2000 206 185 82 125 1
35 2.2 B/3528-21 T495B225(1)035A(2)E4K0 0.8 6.0 4000 146 131 58 125 1
35 2.2 C/6032-28 T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 125 1
35 3.3 B/3528-21 T495B335(1)035A(2)E1K0 1.2 6.0 1000 292 263 117 125 1
35 3.3 B/3528-21 T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 125 1
35 3.3 C/6032-28 T495C335(1)035A(2)E525 1.2 6.0 525 458 412 183 125 1
35 3.3 C/6032-28 T495C335(1)035A(2)E550 1.2 6.0 550 447 402 179 125 1
35 3.3 C/6032-28 T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 125 1
35 4.7 B/3528-21 T495B475(1)035A(2)E850 1.6 6.0 850 316 284 126 125 1
35 4.7 B/3528-21 T495B475(1)035A(2)E1K0 1.6 6.0 1000 292 263 117 125 1
35 4.7 C/6032-28 T495C475(1)035A(2)E450 1.6 6.0 450 494 445 198 125 1
35 4.7 C/6032-28 T495C475(1)035A(2)E500 1.6 6.0 500 469 422 188 125 1
35 4.7 C/6032-28 T495C475(1)035A(2)E600 1.6 6.0 600 428 385 171 125 1
35 4.7 D/7343-31 T495D475(1)035A(2)E300 1.6 6.0 300 707 636 283 125 1
35 6.8 C/6032-28 T495C685(1)035A(2)E1K8 2.4 6.0 1800 247 222 99 125 1
35 6.8 D/7343-31 T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 125 1
35 6.8 D/7343-31 T495D685(1)035A(2)E300 2.4 6.0 300 707 636 283 125 1
35 6.8 D/7343-31 T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 125 1
35 6.8 V/7343-20 T495V685(1)035A(2)E600 2.4 6.0 600 456 410 182 125 1
35 6.8 X/7343-43 T495X685(1)035A(2)E300 2.4 4.0 300 742 668 297 125 1
35 10 C/6032-28 T495C106(1)035A(2)E400 3.5 6.0 400 524 472 210 125 1
35 10 D/7343-31 T495D106(1)035A(2)E120 3.5 4.0 120 1118 1006 447 125 1
35 10 D/7343-31 T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 125 1
35 10 D/7343-31 T495D106(1)035A(2)E130 3.5 6.0 130 1074 967 430 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
17
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
35 10 D/7343-31 T495D106(1)035A(2)E250 3.5 6.0 250 775 698 310 125 1
35 10 D/7343-31 T495D106(1)035A(2)E260 3.5 6.0 260 760 684 304 125 1
35 10 D/7343-31 T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 125 1
35 10 D/7343-31 T495D106(1)035A(2)E1K0 3.5 6.0 1000 387 348 155 125 1
35 10 V/7343-20 T495V106(1)035A(2)E600 3.5 6.0 600 456 410 182 125 1
35 10 X/7343-43 T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 125 1
35 10 X/7343-43 T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 125 1
35 10 X/7343-43 T495X106(1)035A(2)E250 3.5 4.0 250 812 731 325 125 1
35 10 X/7343-43 T495X106(1)035A(2)E260 3.5 4.0 260 797 717 319 125 1
35 15 C/6032-28 T495C156(1)035A(2)E350 5.3 6.0 350 561 505 224 125 1
35 15 D/7343-31 T495D156(1)035A(2)E225 5.3 6.0 225 816 734 326 125 1
35 15 D/7343-31 T495D156(1)035A(2)E260 5.3 6.0 260 760 684 304 125 1
35 15 D/7343-31 T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 125 1
35 15 X/7343-43 T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 125 1
35 15 X/7343-43 T495X156(1)035A(2)E225 5.3 6.0 225 856 770 342 125 1
35 15 X/7343-43 T495X156(1)035A(2)E250 5.3 6.0 250 812 731 325 125 1
35 15 X/7343-43 T495X156(1)035A(2)E260 5.3 6.0 260 797 717 319 125 1
35 22 D/7343-31 T495D226(1)035A(2)E125 7.7 6.0 125 1095 986 438 125 1
35 22 D/7343-31 T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 125 1
35 22 D/7343-31 T495D226(1)035A(2)E250 7.7 6.0 250 775 698 310 125 1
35 22 D/7343-31 T495D226(1)035A(2)E260 7.7 6.0 260 760 684 304 125 1
35 22 D/7343-31 T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 125 1
35 22 X/7343-43 T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 125 1
35 22 X/7343-43 T495X226(1)035A(2)E130 7.7 6.0 130 1127 1014 451 125 1
35 22 X/7343-43 T495X226(1)035A(2)E180 7.7 6.0 180 957 861 383 125 1
35 22 X/7343-43 T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 125 1
35 22 X/7343-43 T495X226(1)035A(2)E260 7.7 6.0 260 797 717 319 125 1
35 22 X/7343-43 T495X226(1)035A(2)E275 7.7 6.0 275 775 698 310 125 1
35 22 X/7343-43 T495X226(1)035A(2)E300 7.7 6.0 300 742 668 297 125 1
35 33 D/7343-31 T495D336(1)035A(2)E200 11.6 6.0 200 866 779 346 125 1
35 33 D/7343-31 T495D336(1)035A(2)E300 11.6 6.0 300 707 636 283 125 1
35 33 X/7343-43 T495X336(1)035A(2)E100 11.6 6.0 100 1285 1157 514 125 1
35 33 X/7343-43 T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 125 1
35 33 X/7343-43 T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 125 1
35 33 X/7343-43 T495X336(1)035A(2)E260 11.6 6.0 260 797 717 319 125 1
35 33 E/7360-38 T495E336(1)035A(2)E200 11.6 6.0 200 1000 900 400 125 1
35 47 X/7343-43 T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 125 1
35 47 X/7343-43 T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 125 1
35 47 X/7343-43 T495X476(1)035A(2)E230 16.5 8.0 230 847 762 339 125 1
35 47 X/7343-43 T495X476(1)035A(2)E300 16.5 8.0 300 742 668 297 125 1
50 1 C/6032-28 T495C105(1)050A(2)E1K3 0.5 4.0 1300 291 262 116 125 1
50 1 C/6032-28 T495C105(1)050A(2)E1K6 0.5 4.0 1600 262 236 105 125 1
50 2.2 D/7343-31 T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 125 1
50 3.3 D/7343-31 T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 125 1
50 4.7 D/7343-31 T495D475(1)050A(2)E275 2.4 6.0 275 739 665 296 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
18
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at
+25°C 100
kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
50 4.7 D/7343-31 T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 125 1
50 4.7 X/7343-43 T495X475(1)050A(2)E300 2.4 4.0 300 742 668 297 125 1
50 6.8 D/7343-31 T495D685(1)050A(2)E190 3.4 6.0 190 889 800 356 125 1
50 6.8 D/7343-31 T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 125 1
50 6.8 D/7343-31 T495D685(1)050A(2)E275 3.4 6.0 275 739 665 296 125 1
50 6.8 D/7343-31 T495D685(1)050A(2)E300 3.4 6.0 300 707 636 283 125 1
50 6.8 D/7343-31 T495D685(1)050A(2)E400 3.4 6.0 400 612 551 245 125 1
50 6.8 X/7343-43 T495X685(1)050A(2)E300 3.4 6.0 300 742 668 297 125 1
50 10 X/7343-43 T495X106(1)050A(2)E250 5.0 8.0 250 812 731 325 125 1
50 10 X/7343-43 T495X106(1)050A(2)E260 5.0 6.0 260 797 717 319 125 1
50 10 X/7343-43 T495X106(1)050A(2)E300 5.0 6.0 300 742 668 297 125 1
50 15 X/7343-43 T495X156(1)050A(2)E200 7.5 6.0 200 908 817 363 125 1
50 15 X/7343-43 T495X156(1)050A(2)E250 7.5 6.0 250 812 731 325 125 1
50 15 X/7343-43 T495X156(1)050A(2)E300 7.5 6.0 300 742 668 297 125 1
VDC at 85°C µF KEMET/EIA (See below for
part options)
µA +20°C
Max/5 Min
% at +20°C
120 Hz Max
mΩ at 20°C
100 kHz
Max
mA at +25°C
100 kHz
mA at
+85°C 100
kHz
mA at
+125°C 100
kHz
°C
Reow
Temp
≤ 260°C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Maximum
Operating
Temp
MSL
19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
19
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Recommended Voltage Derating Guidelines
−55°Cto85°C 85°Cto125°C
% Change in working
DC voltage with
temperature
VR67% of VR
Recommended
maximum application
voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
2. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
speciedforreversevoltage.SeetheReverseVoltage
section for allowable limits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T≤25°C
T≤85°C
T≤125°C
1.00
0.90
0.40
T = Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts at 25°C
w/+20°C Rise
A
3216–18
75
B
3528–21
85
C
6032–28
110
D
7343–31
150
X
7343–43
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
7343–43
270
T510E
7360–38
285
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specied frequency (ohms)
Z = Impedance at specied frequency (ohms)
0%
20%
40%
60%
80%
100%
120%
−55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage
(As % of Rated Voltage)
20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
20
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong
polarity.Thepositiveterminalisidentiedonthecapacitorbodybyastripeplusinsomecasesabevelededge.Asmall
degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated
continuously in reverse mode, even within these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
125°C
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2
A3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04
B3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
M3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
C6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74
U6032–15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74
D7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
E17360–38 3.25 2.77 3.67 10.22 7.30 3.13 2.37 3.87 9.12 6.80 3.03 1.99 4.03 8.26 6.54
T3528–12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
V7343–21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
X17343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualication testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
L
S
W W
L
V1
V2
Grid Placement Courtyard
21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
21
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Soldering Process
The KEMET families of surface mount capacitors are
compatible with wave (single or dual), convection, IR, or vapor
phasereowtechniques.Preheatingofthesecomponents
is recommended to avoid extreme thermal stress. KEMET's
recommendedproleconditionsforconvectionandIR
reowreecttheproleconditionsoftheIPC/J–STD–020D
standard for moisture sensitivity testing. The devices can
safelywithstandamaximumofthreereowpassesatthese
conditions.
Please note that although the X/7343–43 case size can
withstandwavesoldering,thetallprole(4.3mmmaximum)
dictates care in wave process development.
Hand soldering should be performed with care due to the
dicultyinprocesscontrol.Ifperformed,careshouldbe
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad, applying
solderbetweenthepadandthetermination,untilreow
occurs.Oncereowoccurs,theironshouldberemoved
immediately. “Wiping” the edges of a chip and heating the top
surface is not recommended.
Duringtypicalreowoperations,aslightdarkeningofthe
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Prole Feature SnPb Assembly
Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)100°C 150°C
Temperature Maximum (T
Smax
)150°C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/secondmaximum 3°C/secondmaximum
Liquidous Temperature (T
L
)183°C 217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Timewithin5°CofMaximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/secondmaximum 6°C/secondmaximum
Time25°CtoPeak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
* For Case Size height > 2.5 mm
** For Case Size height ≤ 2.5 mm
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp
andtapepeelforcemayincrease.KEMETrecommendsthatmaximumstoragetemperaturenotexceed40°Candmaximum
storagehumiditynotexceed60%relativehumidity.Temperatureuctuationsshouldbeminimizedtoavoidcondensation
on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip
stock should be used promptly, preferably within three years of receipt.
Time
Temperature
Tsmin
25
Tsmax
TL
TPMaximum Ramp Up Rate = 3°C/second
Maximum Ramp Down Rate = 6°C/second
tP
tL
ts
25°C to Peak
22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
22
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Construction
Leadframe
(− Cathode)
Leadframe
(+ Anode)
Tantalum Wire
Molded Epoxy
Case
Molded Epoxy
Case
Polarity
Bevel (+)
Weld
(to attach wire)
Silver Adhesive
Washer
Polarity Stripe (+) Detailed Cross Section
Tantalum Wire
Tantalum
Ta2O5 Dielectric
(First Layer)
Carbon
(Third Layer)
Silver Paint
(Fourth Layer)
Washer
MnO2
(Second Layer)
Capacitor Marking
* 230 = 30th week of 2012
Polarity
Indicator (+)
Rated
Voltage
Picofarad
Code
KEMET
ID
Date
Code*
Date Code *
1st digit = last number of year 2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
2nd and 3rd digit = week of the
year
01 = 1st week of the year to
52 = 52nd week of the year
23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
23
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Tape & Reel Packaging Information
KEMET’smoldedchipcapacitorfamiliesarepackagedin8and12mmplastictapeon7"and13"reelsinaccordancewith
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Embossment
8 mm (0.315”) or
12 mm (0.472”)
Embossed carrier
Right hand
orientation
only
(+) (−)
Top tape thickness
0.10 mm (0.004”)
maximum thickness
180 mm (7.0”) or
330 mm (13.”)
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
S
3216-12
8
2,500
10,000
T
3528-12
8
3,000
10,000
M
3528-15
8
2,500
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
3,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Q
7343-12
12
1,000
3,000
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
O
7360-43
12
250
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
24
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P
0
T
F
W
Center Lines of Cavity
A
0
B
0
User Direction of Unreeling
Cover Tape
K
0
B
1
is for tape feeder reference only,
including draft concentric about B
0
.
T
2
ØD
1
ØD
0
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1, Table 4
(10 pitches cumulative
tolerance on tape ±0.2 mm)
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum
T
1
Maximum
8 mm 1.5+0.10/−0.0
(0.059
+0.004/−0.0)
1.0
(0.039) 1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984) 0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0
8 mm Single (4 mm) 4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
2.0 ±0.05 or 4.0 ±0.10
(0.079 ±0.002 or 0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 5
12 mm
Single (4 mm)
and Double
(8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
2.0 ±0.05 (0.079 ±0.002) or
4.0 ±0.10 (0.157 ±0.004) or
8.0 ±0.10 (0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suffi cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
25© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
25
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Packaging Information Performance Notes
1. Cover tape break force: 1.0 kg minimum.
2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 newton (10 to 100 gf)
12 mm 0.1 to 1.3 newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165°to180°fromtheplaneofthecarriertape.Duringpeeling,thecarrierand/orcovertapeshallbepulledatavelocityof
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape
Width (mm)
Maximum
Rotation (°
T)
8, 12 20 Tape
Width (mm)
Maximum
Rotation (
8, 12 20
°
S)
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
26© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
26
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0+0.5/−0.2
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W1 W2 Maximum W3
8 mm 50
(1.969)
8.4+1.5/−0.0
(0.331+0.059/−0.0)
14.4
(0.567)
Shall accommodate tape
width without interference
12 mm
12.4+2.0/−0.0
(0.488+0.078/−0.0)
18.4
(0.724)
27© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
27
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
minimum Leader
400 mm minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Elongated Sprocket Holes
(32 mm & wider tapes)
28© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 10/24/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
28
Tantalum Surface Mount Capacitors – Low ESR
T495 Surge Robust MnO2
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technicaladviceinferredfromthisInformationorotherwiseprovidedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.