LASER DIODE DRIVER WITH OUTPUT ENABLE Micrel, Inc. DESCRIPTION FEATURES SY100EL1003 SY100EL1003 Up to 1.25Gbps operation 75mA peak drive current Separate modulation control Separate output enable for laser safety Differential inputs for data 75K input pulldown resistor Single power supply Available in 16-pin SOIC package The SY100EL1003 is a high speed current source for driving a semiconductor laser diode in optical transmission applications. The output current modulation is DC - voltage controlled. The modulation current is disabled when output enable is HIGH. The device incorporates complementary open collector outputs with a capability of driving peak current of 75mA. The laser driver current is adjustable by selection of RSET. The resistor REXT must be placed between OUT and V CC to dissipate the worst case power. R SER is recommended to fix laser diode matching issues. The SY100EL1003 utilizes the high performance bipolar ASSET technology. BLOCK DIAGRAM VCC REXT VBB OUT OUT RSER D Internal Logic D EN to Laser Diode BIAS Control Modulation Control RSET MC RSET VEE M9999-031306 hbwhelp@micrel.com or (408) 955-1690 Rev.: H 1 1 Amendment: /0 Issue Date: March 2006 SY100EL1003 Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) Package Type Operating Range Package Marking Lead Finish SY100EL1003ZC Z16-2 Commercial SY100EL1003ZC Sn-Pb SY100EL1003ZCTR(2) Z16-2 Commercial SY100EL1003ZC Sn-Pb SY100EL1003ZI Z16-2 Industrial SY100EL1003ZI Sn-Pb SY100EL1003ZITR(2) Z16-2 Industrial SY100EL1003ZI Sn-Pb SY100EL1003ZG(3) Z16-2 Industrial SY100EL1003ZG with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL1003ZGTR(2, 3) Z16-2 Industrial SY100EL1003ZG with Pb-Free bar-line indicator Pb-Free NiPdAu NC 1 16 V CC Part Number EN 2 15 NC 14 MC 13 OUT N/C 3 RSET 4 V CCO 5 D Top View SOIC Z16-2 12 OUT 6 11 V BB D 7 10 NC NC 8 9 V EE 16-Pin Narrow SOIC (Z16-2) M9999-031306 hbwhelp@micrel.com or (408) 955-1690 Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. 2 Micrel, Inc. SY100EL1003 TRUTH TABLE(1) PIN NAMES Function D D EN OUT OUT Separate positive power supply pins help to isolate sensitive circuitry from noise generating function. +5V for PECL operation or ground for ECL operation. L H L H L H L L L H X X H H L Pin VCC, VCCO VEE Most negative power supply input. Ground for PECL operation or -5V for ECL operation. VBB This pin provides a reference voltage for use in single ended applications or when the input signal is AC coupled into the device. D,D These differential ECL/PECL 100K compatible inputs receive NRZ data. EN This ECL/PECL 100K compatible input enables Laser Driver - modulation current transitions to zero when asserted HIGH. OUT, OUT Open collector outputs from the modulation buffer drive these differential current outputs. MC An external voltage sets the main value of modulation current IO. RSET An external resistor sets the source current for modulation Imod. NC These pins are not connected. NOTE: 1. L = LOW, H = HIGH, X = don't care ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VEE Power Supply Voltage (VCC = 0V) 0 to -7.0 V VIN Input Voltage (VCC = 0V) 0 to -6.0 V IOUT Output Current 75 mA TLEAD Lead Temperatre (soldering, 20sec.) +260 C TA Operating Temperature Range -40 to +85 C Ptot Power Dissipation 500 mW Note: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. OPERATIONING CONDITIONS(1) Symbol Rating Value Unit -4.75 to -5.25 V Resistor to Adjust Current 10 to 100 REXT Resistor to Dissipate Power 10 to 50 RSER Laser Diode Serial Resistor 0 to 50 VEE Power Supply Voltage RSET Note: 1. The voltage drop across REXT and RSER should not be greater than 2V. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 3 SY100EL1003 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS(1) VCC = VCCO = 0V; VEE = -5.0V 5% TA = -40C Symbol Parameter TA = 0C TA = +25C TA = +85C Min. Typ. Max. Min. Typ. Max. Min. VIH Input HIGH Voltage (D, EN) -1165 -- -880 -1165 -- -880 -1165 -- -880 -1165 -- -880 VIL Input LOW Voltage (D, EN) -1810 -- -1475 -1810 -- -1475 -1810 -- -1475 -1810 -- -1475 mV VImod Input Voltage (Modulation Control) VEE -- VCC VEE -- VBB Output Reference Voltage -1380 -- -1260 -1380 -- IIH Input HIGH Current (D, EN) -- -- 150 -- -- 150 -- -- 150 -- -- 150 A IImod Input Current (Modulation Control) -- -- 150 -- -- 150 -- -- 150 -- -- 150 A IIL Input LOW Current(2) (D, EN) 0.5 -- -- 0.5 -- -- 0.5 -- -- 0.5 -- -- A ICC Supply Current(3) 8 14 25 8 14 25 8 14 25 8 14 25 mA 60 64 -- 68 -- 60 5 64 -- 68 -- 60 5 64 -- 68 -- 60 5 64 -- 68 -- mA 5 Current(4) VCC VEE -1260 -1380 Typ. Max. -- -- VCC Min. VEE -1260 -1380 Typ. Max. Unit -- -- VCC mV V -1260 mV IOH Output HIGH (EN LOW)(5) IOL Output LOW Current (EN HIGH) -- -- 500 -- -- 500 -- -- 500 -- -- 500 A IOR Output Current Ringing(6) -- -- 10 -- -- 10 -- -- 10 -- -- 10 % IOmod Laser Diode Modulation Current Range 5 -- 60 5 -- 60 5 -- 60 5 -- 60 mA Notes: 1. RSET = 10 1% 2. VI = VIL(Min.) 3. VImod = VCC 4. VImod = -3.5V 5. VLmod = -0.8V 6. IOH = 5 to 60mA AC ELECTRICAL CHARACTERISTICS(1) VImod = -1.5V; VCC = VCCO = 0V; VEE = -5V 5% TA = -40C Symbol Parameter TA = 0C TA = +25C TA = +85C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit tpd D Propagation Delay D - OUT -- -- 1000 -- -- 1000 -- -- 1000 -- -- 1000 ps tpd EN Propogation Delay EN - OUT -- -- 1000 -- -- 1000 -- -- 1000 -- -- 1000 ps tr tf Rise/Fall Time (20% to 80%) -- -- 400 -- -- 400 -- -- 400 -- -- 400 ps Note: 1. RSET = 10 1%, REXT = RSER = 50 1% M9999-031306 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. SY100EL1003 PERFORMANCE CURVES IO vs. TA and Vmod IO (mA) 70 TA = 0C TA = 25C TA = 70C 60 50 40 30 20 10 0 0 1.0 2.0 3.0 4.0 5.0 -Vmod (V) M9999-031306 hbwhelp@micrel.com or (408) 955-1690 5 SY100EL1003 Micrel, Inc. APPLICATION EXAMPLE D 82 50 COAX EN D 130 50 COAX 50 COAX VEE VEE VCCO VEE VCC RSET RSET SY100EL1003 VCC 0.1F VCC MC REXT OUT OUT VCC 10k VEE A 1k VCC 1k 750 0.02F VCC VCC + - 0.1F 470k 2 IC 47k 10k VEE 47k 4.7k IC 1 - + 1k 10k 47k LASER BIAS / APC CONTROL 0.1H LASER MODULE RSER VEE 0.1F 10 0.1F 24 2 B 6 M9999-031306 hbwhelp@micrel.com or (408) 955-1690 VCC 1 IC = IC = LM324 VEE = -5.0V VCC = 0V NOTES: 1. Split 100K ECL terminations are 82 and 130 to VCC and VEE respectively. 2. Recommended power supply bypass capacitors are 0.1F with optional 10F Tantalum in parallel. 3. It is required to use high frequency design techniques for board layout. A double sided or multilayer board is recommended in conjunction with a low impedance ground plane and properly terminated transmission lines for all signal paths. 4. VBB voltage pin may be used as reference for single ended input applications. INPUTS Micrel, Inc. SY100EL1003 16-PIN SOIC .150" WIDE (Z16-2) Rev. 02 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Micrel: SY100EL1003ZG SY100EL1003ZG TR SY100EL1003ZG-TR