© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1
One world. One KEMET
Benets
• Established reliability options
• Taped and reeled per EIA 481
• Symmetrical, compliant terminations
• Laser-marked case
• 100% surge current test available on all case sizes
• QualiedtoMIL–PRF–55365/8(CWR11Style)
• Termination options B, C, H, K
• WeibullfailureoptionsB,C,D,andT
• ExponentialfailureratesM,P,R,S
• Voltageratingof4–50VDC
• Operatingtemperaturerangeof−55°Cto+125°C
Overview
TheKEMETT492SeriesisapprovedtoMIL–PRF–55365/8
(CWR11Style)withWeibullfailureratesofBlevel(0.1%
failuresper1,000hours),Clevel(0.01%failuresper1,000
hours),Dlevel(0.001%failuresper1,000hours),orTlevel
(0.01%failuresper1,000hours,OptionCsurgecurrent,
DPA,Radiographicinspection,100%visualinspection,
DCLandESRmeasurementswithin+3standarddeviations,
andGroupCinspection).ThisCWR11productisaprecision-
molded device with compliant terminations and indelible
lasermarking.ThisisthemilitaryversionoftheglobalIEC/
EIA standard represented by KEMET's T491 Series. Tape and
reeling per EIA 481 is standard.
TantalumSurfaceMountCapacitors–MIL–PRF(CWRStyle)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Applications
TypicalapplicationsincludedecouplingandlteringinmilitaryandaerospaceapplicationsrequiringCWR11devices.
Environmental Compliance
RoHSCompliant(6/6)accordingtoDirective2002/95/ECwhenorderedwith100%SnSolder.
K-SIM
Foradetailedanalysisofspecicpartnumbers,pleasevisitksim.kemet.comtoaccessKEMET’sK-SIMsoftware.KEMET
K-SIMisdesignedtosimulatebehaviorofcomponentswithrespecttofrequency,ambienttemperature,andDCbiaslevels.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 22
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
KEMET Ordering Information
T492 D156 K020 AC4251
Capacitor
Class Series Case
Size
Capacitance
Code(pF)
Capacitance
Tolerance
Rated
Voltage
(VDC)
FailureRate/
Design TerminationFinish Surge(C-Spec) Packaging
(C-Spec)
T =
Tantalum
CWR11
Established
Reliability
A
B
C
D
Firsttwodigits
represent
signicant
gures.Third
digitspecies
numberof
zeros.
J = ±5%
K = ±10%
M = ±20%
004 = 4
006 = 6.3
010 = 10
015 = 15
020 = 20
025 = 25
035 = 35
050 = 50
Weibull
A=non-ER
B=(0.1%/
1,000hours)
C=(0.01%/
1,000hours)
D=(0.001%/
1,000hours)
T=(0.01%/
1,000hours)
Exponential
M=(1.0%/
1,000hours)
P=(0.1%/
1,000hours)
R=(0.01%/
1,000hours)
S=(0.001%/
1,000 hours
C = Hot Solder
Dipped
H = Standard
Solder Coated
(SnPb5%Pb
minimum)
B = Gold Plated
K=SolderFused
4250=25ºCafter
Weibull
4251=−55ºCand
85ºCafterWeibull
4252=−55ºCand
85ºCbeforeWeibull
TLVL=WeibullGrade
Level "T"
Blank=7"Reel
7280=13"Reel
7610 = Bulk Bag
7640 = Bulk
plastic box
WAFL=Wafe
Pack
Ordering Information – Defense MIL–PRF–55365/8
CWR11 MH105 K B A
Capacitor Style
Rated
Voltage
(VDC)
TerminationFinish CapacitanceCode(pF)
Capacitance
Tolerance ReliabilityLevel Surge Current
Option
PerMIL–PRF–
55365/8
C = 4
D=6
F=10
H = 15
J = 20
K = 25
M = 35
N = 50
B = Gold Plated
C = Hot solder
dipped
H = Solder Plated
K=Solderfused Firsttwodigitsrepresent
signicantgures.Third
digitspeciesnumberof
zeros.
J = ±5%
K = ±10%
M = ±20%
Weibull
A=non-ER
B=(0.1%/1,000hours)
C=(0.01%/1,000hours)
D=(0.001%/1,000hours)
T=TLevel*(0.01%/1,000
hours)
Exponential
M=(1.0%/1,000hours)
P=(0.1%/1,000hours)
R=(0.01%/1,000hours)
S=(0.001%/1,000hours
A=+25°Cafter
Weibull
B=−55°C+85°C
afterWeibull
C=−55°C+85°C
beforeWeibull
Blank = None
* When T Level is ordered, no Surge Current Option is needed
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 33
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Performance Characteristics
Item Performance Characteristics
Operating Temperature −55°Cto125°C
RatedCapacitanceRange 0.1–100µFat120Hz/25°C
Capacitance Tolerance JTolerance(5%),KTolerance(10%),MTolerance(20%)
RatedVoltageRange 4–50V
DF(120Hz) RefertoPartNumberElectricalSpecicationTable
ESR(100kHz) RefertoPartNumberElectricalSpecicationTable
Leakage Current ≤0.01CV(µA)atratedvoltageafter5minutes
Qualication
Test Condition Characteristics
Endurance 85°Catratedvoltage,2,000hours
125°Cat2/3ratedvoltage,2,000hours
ΔC/C
DF
DCL
ESR
StorageLife 125°Cat0volts,2,000hours
ΔC/C
DF
DCL
ESR
Thermal Shock MIL–STD–202,Method107,ConditionB,mounted,
−55°Cto125°C,1,000cycles
ΔC/C
DF
DCL
ESR
Temperature Stability
Extreme temperature exposure at a
successionofcontinuousstepsat+25°C,
−55°C,+25°C,+85°C,+125°C,+25°C
+25°C
−55°C
+85°C
+125°C
ΔC/C
IL*
±10%
±10%
±15%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
n/a
10 x IL
12 x IL
Surge Voltage 25°Cand85°C,1.32xratedvoltage1,000cycles
(125°C,1.2xratedvoltage)
ΔC/C
DF
DCL
ESR
Mechanical Shock/
Vibration
MIL–STD–202,Method213,ConditionI,100Gpeak
MIL–STD–202,Method204,ConditionD,10Hzto
2,000 Hz, 20 G peak
ΔC/C
DF
DCL
Additionalqualication
testsperMIL–PRF–
55365/8
PleasecontactKEMETformoreinformation.
*IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 44
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Certication
MIL–PRF–55365/8
Electrical Characteristics
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T492B225/020
T492C685/020
T492D156/020
Capacitancevs.Frequency
ESRvs.Frequency
0.1
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T492B225/020_IMP
T492C685/020_IMP
T492D156/020_IMP
T492B225/020_ESR
T492C685/020_ESR
T492D156/020_ESR
Dimensions – Millimeters (Inches)
Metric will govern
W
½ H
2
Min.
P
L
SIDE VIEW
BOTTOM VIEW
END VIEW
P
W
2
H
2
H
Solderable
Surfaces
Termination cutout
at KEMET's option,
either end
Case Size Component Total Weight
KEMET H H2 Minimum L
P ±0.3
(0.012)
W
W
2
±0.1
(0.004)
(mg)
A
1.6±0.2
(0.063±0.008)
0.7
(0.028)
3.2±0.2
(0.126±0.008)
0.8
(0.031)
1.6±0.2
(0.063±0.008)
1.2
(0.047)
58.97
B
1.9±0.2
(0.075±0.008)
0.7
(0.028)
3.5±0.2
(0.138±0.008)
0.8
(0.031)
2.8±0.2
(0.110±0.008)
2.2
(0.087) 102.3
C
2.5±0.3
(0.098±0.012)
1.0
(0.039)
6.0±0.3
(0.236±0.012)
1.3
(0.051)
3.2±0.3
(0.126±0.012)
2.2
(0.087)
224.2
D
2.8±0.3
(0.110±0.012)
1.0
(0.039)
7.3±0.3
(0.287±0.012)
1.3
(0.051)
4.3±0.3
(0.169±0.012)
2.4
(0.094)
412.33
Note: When option C is selected for lead material, add an additional 0.38 mm (0.015 inch) to the above tolerances for "L", "W", "H", "P", "W2" and "H2"
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 55
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H or S = Solder Plated or K = Solder Fused. Designates Termination
Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = −55°C +85°C after Weibull, or 4252 = −55°C +85°C before Weibull.
Designates Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = −55°C +85°C after Weibull, C = −55°C +85°C before Weibull or Z = None. Designates
Surge current option.
(6) To complete CWR part number, insert B = Gold Plated, C = Hot Solder Dipped, H = Solder Plated or K = Solder Fused. Designates Termination Finish.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
MIL–PRF–
55365/8
Part Number
DC
Leakage DF ESR
Maximum
Operating
Temp
MSL
VDC @ 85ºCµF KEMET/EIA
(See below for
part options)
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
ºC
Reow Temp
≤ 260ºC
42.2 A/3216-18 T492A225(1)004(2)(3)(4) CWR11C(6)225(1)(2)(5) 0.5 6.0 8.0 125 1
44.7 A/3216-18 T492A475(1)004(2)(3)(4) CWR11C(6)475(1)(2)(5) 0.5 6.0 8.0 125 1
46.8 B/3528-21 T492B685(1)004(2)(3)(4) CWR11C(6)685(1)(2)(5) 0.5 6.0 5.5 125 1
410 B/3528-21 T492B106(1)004(2)(3)(4) CWR11C(6)106(1)(2)(5) 0.5 6.0 4.0 125 1
415 B/3528-21 T492B156(1)004(2)(3)(4) CWR11C(6)156(1)(2)(5) 0.6 6.0 3.5 125 1
433 C/6032-28 T492C336(1)004(2)(3)(4) CWR11C(6)336(1)(2)(5) 1.3 6.0 2.2 125 1
468 D/7343-31 T492D686(1)004(2)(3)(4) CWR11C(6)686(1)(2)(5) 2.7 6.0 1.1 125 1
4100 D/7343-31 T492D107(1)004(2)(3)(4) CWR11C(6)107(1)(2)(5) 4.0 8.0 0.9 125 1
61.5 A/3216-18 T492A155(1)006(2)(3)(4) CWR11D(6)155(1)(2)(5) 0.5 6.0 8.0 125 1
62.2 A/3216-18 T492A225(1)006(2)(3)(4) CWR11D(6)225(1)(2)(5) 0.5 6.0 8.0 125 1
63.3 A/3216-18 T492A335(1)006(2)(3)(4) CWR11D(6)335(1)(2)(5) 0.5 6.0 8.0 125 1
64.7 B/3528-21 T492B475(1)006(2)(3)(4) CWR11D(6)475(1)(2)(5) 0.5 6.0 5.5 125 1
66.8 B/3528-21 T492B685(1)006(2)(3)(4) CWR11D(6)685(1)(2)(5) 0.5 6.0 4.5 125 1
610 B/3528-21 T492B106(1)006(2)(3)(4) CWR11D(6)106(1)(2)(5) 0.6 6.0 3.5 125 1
615 C/6032-28 T492C156(1)006(2)(3)(4) CWR11D(6)156(1)(2)(5) 0.9 6.0 3.0 125 1
622 C/6032-28 T492C226(1)006(2)(3)(4) CWR11D(6)226(1)(2)(5) 1.3 6.0 2.2 125 1
647 D/7343-31 T492D476(1)006(2)(3)(4) CWR11D(6)476(1)(2)(5) 2.8 6.0 1.1 125 1
668 D/7343-31 T492D686(1)006(2)(3)(4) CWR11D(6)686(1)(2)(5) 4.1 6.0 0.9 125 1
10 1A/3216-18 T492A105(1)010(2)(3)(4) CWR11F(6)105(1)(2)(5) 0.5 4.0 10.0 125 1
10 1.5 A/3216-18 T492A155(1)010(2)(3)(4) CWR11F(6)155(1)(2)(5) 0.5 6.0 8.0 125 1
10 2.2 A/3216-18 T492A225(1)010(2)(3)(4) CWR11F(6)225(1)(2)(5) 0.5 6.0 8.0 125 1
10 3.3 B/3528-21 T492B335(1)010(2)(3)(4) CWR11F(6)335(1)(2)(5) 0.5 6.0 5.5 125 1
10 4.7 B/3528-21 T492B475(1)010(2)(3)(4) CWR11F(6)475(1)(2)(5) 0.5 6.0 4.5 125 1
10 6.8 B/3528-21 T492B685(1)010(2)(3)(4) CWR11F(6)685(1)(2)(5) 0.7 6.0 3.5 125 1
10 15 C/6032-28 T492C156(1)010(2)(3)(4) CWR11F(6)156(1)(2)(5) 1.5 6.0 2.5 125 1
10 33 D/7343-31 T492D336(1)010(2)(3)(4) CWR11F(6)336(1)(2)(5) 3.3 6.0 1.1 125 1
10 47 D/7343-31 T492D476(1)010(2)(3)(4) CWR11F(6)476(1)(2)(5) 4.7 6.0 0.9 125 1
15 0.68 A/3216-18 T492A684(1)015(2)(3)(4) CWR11H(6)684(1)(2)(5) 0.5 4.0 12.0 125 1
15 1A/3216-18 T492A105(1)015(2)(3)(4) CWR11H(6)105(1)(2)(5) 0.5 4.0 10.0 125 1
15 1.5 A/3216-18 T492A155(1)015(2)(3)(4) CWR11H(6)155(1)(2)(5) 0.5 6.0 8.0 125 1
15 2.2 B/3528-21 T492B225(1)015(2)(3)(4) CWR11H(6)225(1)(2)(5) 0.5 6.0 5.5 125 1
15 3.3 B/3528-21 T492B335(1)015(2)(3)(4) CWR11H(6)335(1)(2)(5) 0.5 6.0 5.0 125 1
15 4.7 B/3528-21 T492B475(1)015(2)(3)(4) CWR11H(6)475(1)(2)(5) 0.7 6.0 4.0 125 1
15 10 C/6032-28 T492C106(1)015(2)(3)(4) CWR11H(6)106(1)(2)(5) 1.5 6.0 2.5 125 1
15 22 D/7343-31 T492D226(1)015(2)(3)(4) CWR11H(6)226(1)(2)(5) 3.3 6.0 1.1 125 1
15 33 D/7343-31 T492D336(1)015(2)(3)(4) CWR11H(6)336(1)(2)(5) 5.0 6.0 0.9 125 1
20 0.47 A/3216-18 T492A474(1)020(2)(3)(4) CWR11J(6)474(1)(2)(5) 0.5 4.0 14.0 125 1
20 0.68 A/3216-18 T492A684(1)020(2)(3)(4) CWR11J(6)684(1)(2)(5) 0.5 4.0 12.0 125 1
20 1A/3216-18 T492A105(1)020(2)(3)(4) CWR11J(6)105(1)(2)(5) 0.5 4.0 10.0 125 1
20 1.5 B/3528-21 T492B155(1)020(2)(3)(4) CWR11J(6)155(1)(2)(5) 0.5 6.0 6.0 125 1
20 2.2 B/3528-21 T492B225(1)020(2)(3)(4) CWR11J(6)225(1)(2)(5) 0.5 6.0 5.0 125 1
20 3.3 B/3528-21 T492B335(1)020(2)(3)(4) CWR11J(6)335(1)(2)(5) 0.7 6.0 4.0 125 1
VDC @ 85ºCµF KEMET/EIA
(See below for
part options)
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number MIL–PRF–55365/8
Part Number
DC
Leakage DF ESR
Maximum
Operating
Temp
MSL
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 66
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H or S = Solder Plated or K = Solder Fused. Designates Termination
Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = −55°C +85°C after Weibull, or 4252 = −55°C +85°C before Weibull.
Designates Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = −55°C +85°C after Weibull, C = −55°C +85°C before Weibull or Z = None. Designates
Surge current option.
(6) To complete CWR part number, insert B = Gold Plated, C = Hot Solder Dipped, H = Solder Plated or K = Solder Fused. Designates Termination Finish.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
MIL–PRF–
55365/8
Part Number
DC
Leakage DF ESR
Maximum
Operating
Temp
MSL
VDC @ 85ºCµF KEMET/EIA
(See below for
part options)
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
ºC
Reow Temp
≤ 260ºC
20 4.7 C/6032-28 T492C475(1)020(2)(3)(4) CWR11J(6)475(1)(2)(5) 0.9 6.0 3.0 125 1
20 6.8 C/6032-28 T492C685(1)020(2)(3)(4) CWR11J(6)685(1)(2)(5) 1.4 6.0 2.4 125 1
20 15 D/7343-31 T492D156(1)020(2)(3)(4) CWR11J(6)156(1)(2)(5) 3.0 6.0 1.1 125 1
20 22 D/7343-31 T492D226(1)020(2)(3)(4) CWR11J(6)226(1)(2)(5) 4.4 6.0 0.9 125 1
25 0.33 A/3216-18 T492A334(1)025(2)(3)(4) CWR11K(6)334(1)(2)(5) 0.5 4.0 15.0 125 1
25 0.47 A/3216-18 T492A474(1)025(2)(3)(4) CWR11K(6)474(1)(2)(5) 0.5 4.0 14.0 125 1
25 0.68 B/3528-21 T492B684(1)025(2)(3)(4) CWR11K(6)684(1)(2)(5) 0.5 4.0 7.5 125 1
25 1B/3528-21 T492B105(1)025(2)(3)(4) CWR11K(6)105(1)(2)(5) 0.5 4.0 6.5 125 1
25 1.5 B/3528-21 T492B155(1)025(2)(3)(4) CWR11K(6)155(1)(2)(5) 0.5 6.0 6.5 125 1
25 2.2 C/6032-28 T492C225(1)025(2)(3)(4) CWR11K(6)225(1)(2)(5) 0.6 6.0 3.5 125 1
25 3.3 C/6032-28 T492C335(1)025(2)(3)(4) CWR11K(6)335(1)(2)(5) 0.8 6.0 3.5 125 1
25 4.7 C/6032-28 T492C475(1)025(2)(3)(4) CWR11K(6)475(1)(2)(5) 1.2 6.0 2.5 125 1
25 6.8 D/7343-31 T492D685(1)025(2)(3)(4) CWR11K(6)685(1)(2)(5) 1.7 6.0 1.4 125 1
25 10 D/7343-31 T492D106(1)025(2)(3)(4) CWR11K(6)106(1)(2)(5) 2.5 6.0 1.2 125 1
25 15 D/7343-31 T492D156(1)025(2)(3)(4) CWR11K(6)156(1)(2)(5) 3.8 6.0 1.0 125 1
35 0.1 A/3216-18 T492A104(1)035(2)(3)(4) CWR11M(6)104(1)(2)(5) 0.5 4.0 24.0 125 1
35 0.15 A/3216-18 T492A154(1)035(2)(3)(4) CWR11M(6)154(1)(2)(5) 0.5 4.0 21.0 125 1
35 0.22 A/3216-18 T492A224(1)035(2)(3)(4) CWR11M(6)224(1)(2)(5) 0.5 4.0 18.0 125 1
35 0.33 A/3216-18 T492A334(1)035(2)(3)(4) CWR11M(6)334(1)(2)(5) 0.5 4.0 15.0 125 1
35 0.47 B/3528-21 T492B474(1)035(2)(3)(4) CWR11M(6)474(1)(2)(5) 0.5 4.0 10.0 125 1
35 0.68 B/3528-21 T492B684(1)035(2)(3)(4) CWR11M(6)684(1)(2)(5) 0.5 4.0 8.0 125 1
35 1B/3528-21 T492B105(1)035(2)(3)(4) CWR11M(6)105(1)(2)(5) 0.5 4.0 6.5 125 1
35 1.5 C/6032-28 T492C155(1)035(2)(3)(4) CWR11M(6)155(1)(2)(5) 0.5 6.0 4.5 125 1
35 2.2 C/6032-28 T492C225(1)035(2)(3)(4) CWR11M(6)225(1)(2)(5) 0.8 6.0 3.5 125 1
35 3.3 C/6032-28 T492C335(1)035(2)(3)(4) CWR11M(6)335(1)(2)(5) 1.2 6.0 2.5 125 1
35 4.7 D/7343-31 T492D475(1)035(2)(3)(4) CWR11M(6)475(1)(2)(5) 1.6 6.0 1.5 125 1
35 6.8 D/7343-31 T492D685(1)035(2)(3)(4) CWR11M(6)685(1)(2)(5) 2.4 6.0 1.3 125 1
50 0.1 A/3216-18 T492A104(1)050(2)(3)(4) CWR11N(6)104(1)(2)(5) 0.5 6.0 22.0 125 1
50 0.15 B/3528-21 T492B154(1)050(2)(3)(4) CWR11N(6)154(1)(2)(5) 0.5 4.0 17.0 125 1
50 0.22 B/3528-21 T492B224(1)050(2)(3)(4) CWR11N(6)224(1)(2)(5) 0.5 4.0 14.0 125 1
50 0.33 B/3528-21 T492B334(1)050(2)(3)(4) CWR11N(6)334(1)(2)(5) 0.5 4.0 12.0 125 1
50 0.47 C/6032-28 T492C474(1)050(2)(3)(4) CWR11N(6)474(1)(2)(5) 0.5 4.0 8.0 125 1
50 0.68 C/6032-28 T492C684(1)050(2)(3)(4) CWR11N(6)684(1)(2)(5) 0.5 4.0 7.0 125 1
50 1 C/6032-28 T492C105(1)050(2)(3)(4) CWR11N(6)105(1)(2)(5) 0.5 4.0 6.0 125 1
50 1.5 D/7343-31 T492D155(1)050(2)(3)(4) CWR11N(6)155(1)(2)(5) 0.8 6.0 4.0 125 1
50 2.2 D/7343-31 T492D225(1)050(2)(3)(4) CWR11N(6)225(1)(2)(5) 1.1 6.0 2.5 125 1
50 3.3 D/7343-31 T492D335(1)050(2)(3)(4) CWR11N(6)335(1)(2)(5) 1.7 6.0 2.0 125 1
50 4.7 D/7343-31 T492D475(1)050(2)(3)(4) CWR11N(6)475(1)(2)(5) 2.4 6.0 1.5 125 1
VDC @ 85ºCµF KEMET/EIA
(See below for
part options)
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number MIL–PRF–55365/8
Part Number
DC
Leakage DF ESR
Maximum
Operating
Temp
MSL
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 77
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Recommended Voltage Derating Guidelines
−55°Cto85°C 85°Cto125°C
%ChangeinWorkingDC
Voltage with Temperature
VR67%ofVR
RecommendedMaximum
Application Voltage
50%ofVR33%ofVR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalentseriesresistance(ESR)andthepowerdissipation
capabilitiesofthedevice.PermissibleACripplevoltage
which may be applied is limited by two criteria:
1.ThepositivepeakACvoltageplustheDCbiasvoltage,
ifany,mustnotexceedtheDCvoltageratingofthe
capacitor.
2. The negative peak AC voltage in combination with
biasvoltage,ifany,mustnotexceedtheallowablelimits
speciedforreversevoltage.SeetheReverseVoltage
sectionforallowablelimits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasingenvironmentaloperatingtemperatures.Referto
thetablebelowfortemperaturecompensationrequirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T≤25°C
T≤85°C
T≤125°C
1.00
0.90
0.40
T= Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts at 25°C
w/+20°C Rise
A
3216–18
75
B
3528–21
85
C
6032–28
110
D
7343–31
150
X
7343–43
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
7343–43
270
T510E
7360–38
285
UsingthePmaxofthedevice,themaximumallowablerms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specied frequency (ohms)
Z = Impedance at specied frequency (ohms)
0%
20%
40%
60%
80%
100%
120%
−55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage
(As % of Rated Voltage)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 88
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Reverse Voltage
Solidtantalumcapacitorsarepolardevicesandmaybepermanentlydamagedordestroyedifconnectedwiththewrong
polarity.Thepositiveterminalisidentiedonthecapacitorbodybyastripeplusinsomecasesabevelededge.Asmall
degreeoftransientreversevoltageispermissibleforshortperiodsperthetable.Thecapacitorsshouldnotbeoperated
continuously in reverse mode, even within these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15%ofRatedVoltage
85°C
5%ofRatedVoltage
125°C
1%ofRatedVoltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case EIA W L SV1 V2 W L SV1 V2 W L SV1 V2
A3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04
B3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
C6032–25 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74
D7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform
qualication testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
L
S
W W
L
V1
V2
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 99
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Soldering Process
KEMET’sfamiliesofsurfacemountcapacitorsarecompatible
withwave(singleordual),convection,IR,orvaporphase
reowtechniques.Preheatingofthesecomponentsis
recommended to avoid extreme thermal stress. KEMET's
recommendedproleconditionsforconvectionandIR
reowreecttheproleconditionsoftheIPC/J–STD–020D
standardformoisturesensitivitytesting.Thedevicescan
safelywithstandamaximumofthreereowpassesatthese
conditions.
PleasenotethatalthoughtheX/7343–43casesizecan
withstandwavesoldering,thetallprole(4.3mmmaximum)
dictates care in wave process development.
Handsolderingshouldbeperformedwithcareduetothe
difcultyinprocesscontrol.Ifperformed,careshouldbe
takentoavoidcontactofthesolderingirontothemolded
case. The iron should be used to heat the solder pad, applying
solderbetweenthepadandthetermination,untilreow
occurs.Oncereowoccurs,theironshouldberemoved
immediately.“Wiping”theedgesofachipandheatingthetop
surfaceisnotrecommended.
Duringtypicalreowoperations,aslightdarkeningofthe
gold-colored epoxy may be observed. This slight darkening is
normalandnotharmfultotheproduct.Markingpermanency
isnotaffectedbythischange.
Prole Feature SnPb Assembly
Pb-Free Assembly
Preheat/Soak
TemperatureMinimum(T
Smin
)100°C 150°C
TemperatureMaximum(T
Smax
)150°C 200°C
Time(t
s
)fromT
smin
to T
smax
) 60–120seconds 60–120seconds
Ramp-upRate(T
L
to T
P
)3°C/secondsmaximum 3°C/secondsmaximum
LiquidousTemperature(T
L
)183°C 217°C
TimeAboveLiquidous(t
L
) 60–150seconds 60–150seconds
PeakTemperature(TP)
220°C*
235°C**
250°C*
260°C**
Timewithin5°CofMaximum
PeakTemperature(tP)
20 seconds maximum 30 seconds maximum
Ramp-downRate(T
P
to T
L
)6°C/secondsmaximum 6°C/secondsmaximum
Time25°CtoPeak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size G, and H
**Case Size A, B, C, D, and F
Storage
Tantalumchipcapacitorsshouldbestoredinnormalworkingenvironments.Whilethechipsthemselvesarequiterobustin
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
andlongtermstorage.Inaddition,packagingmaterialswillbedegradedbyhightemperature–reelsmaysoftenorwarp
andtapepeelforcemayincrease.KEMETrecommendsthatmaximumstoragetemperaturenotexceed40°Candmaximum
storagehumiditynotexceed60%relativehumidity.Temperatureuctuationsshouldbeminimizedtoavoidcondensationon
thepartsandatmospheresshouldbefreeofchlorineandsulphurbearingcompounds.Foroptimizedsolderabilitychipstock
shouldbeusedpromptly,preferablywithinthreeyearsofreceipt.
Time
Temperature
Tsmin
25
Tsmax
TL
TPMaximum Ramp Up Rate = 3ºC/sec
Maximum Ramp Down Rate = 6ºC/sec
tP
tL
ts
25ºC to Peak
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1010
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Construction
Leadframe
(− Cathode)
Leadframe
(+ Anode)
Tantalum Wire
Molded Epoxy
Case
Molded Epoxy
Case
Weld
(to attach wire)
Silver Adhesive
Washer
Detailed Cross Section
Tantalum Wire
Tantalum
Ta2O5 Dielectric
(First Layer)
Carbon
(Third Layer)
Silver Paint
(Fourth Layer)
Washer
MnO2
(Second Layer)
Polarity Stripe (+)
Capacitor Marking
* 230 = 30th week of 2012
KEMET CWR
11 Style Polarity
Indicator (+)
Rated
Voltage
Picofarad
Code
KEMET
ID
Date
Code*
Date Code *
1stdigit=LastnumberofYear
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
2nd and 3rd
digit=WeekoftheYear
01 = 1stweekoftheYearto
52 = 52
nd
weekoftheYear
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1111
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Tape & Reel Packaging Information
KEMET’smoldedchipcapacitorfamiliesarepackagedin8and12mmplastictapeon7"and13"reelsinaccordancewith
EIA Standard 481:EmbossedCarrierTapingofSurfaceMountComponentsforAutomaticHandling.Thispackagingsystem
iscompatiblewithalltape-fedautomaticpick-and-placesystems.
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
3,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Q
7343-12
12
1,000
3,000
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1212
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
RReference
Note 2
S
1
Minimum
Note 3
T Maximum
T
1
Maximum
8 mm
1.5+0.10/−0.0
(0.059+0.004/−0.0)
1.0
(0.039)
1.75±0.10
(0.069±0.004)
4.0±0.10
(0.157±0.004)
2.0±0.05
(0.079±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
2.0±0.1
(0.079±0.059)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see
Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum WMaximum A0, B0 & K0
8 mm Single(4mm)
4.35
(0.171)
6.25
(0.246)
3.5±0.05
(0.138±0.002)
2.0±0.05 or 4.0±0.10
(0.079±0.002or0.157±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single(4mm)
&Double(8
mm)
8.2
(0.323)
10.25
(0.404)
5.5±0.05
(0.217±0.002)
2.0±0.05(0.079±0.002)or
4.0±0.10(0.157±0.004)or
8.0±0.10(0.315±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple(12mm)
12.1
(0.476)
14.25
(0.561)
7.5±0.10
(0.295±0.004)
4.0±0.10(0.157±0.004)
to12.0±0.10(0.472±0.004)
8.0(0.315)
16.3
(0.642)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1313
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: Thetotalpeelstrengthofthecovertapefromthecarriertapeshallbe:
Tape Width Peel Strength
8 mm 0.1to1.0Newton(10to100gf)
12 and 16 mm 0.1to1.3Newton(10to130gf)
Thedirectionofthepullshallbeoppositethedirectionofthecarriertapetravel.Thepullangleofthecarriertapeshallbe
165°to180°fromtheplaneofthecarriertape.Duringpeeling,thecarrierand/orcovertapeshallbepulledatavelocityof
300 ±10 mm/minute.
3. Labeling:Barcodelabeling(standardorcustom)shallbeonthesideofthereeloppositethesprocketholes.Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1414
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3 (Includes
flange distortion
at outer edge)
W2 (Measured at hub)
W1 (Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C DMinimum
8 mm
178±0.20
(7.008±0.008)
or
330±0.20
(13.000±0.008)
1.5
(0.059)
13.0+0.5/−0.2
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W1 W2 Maximum W3
8 mm
50
(1.969)
8.4+1.5/−0.0
(0.331+0.059/−0.0)
14.4
(0.567)
Shall accommodate tape
widthwithoutinterference
12 mm
12.4+2.0/−0.0
(0.488+0.078/−0.0)
18.4
(0.724)
16 mm
16.4+2.0/−0.0
(0.646+0.078/−0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1515
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2006_T492 • 9/22/2016 1616
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T492 Series MIL–PRF–55365/8 (CWR11 Style)
KEMET Electronic Corporation Sales Of ces
Foracompletelistofourglobalsalesofces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.
AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any
technicaladviceinferredfromthisInformationorotherwiseprovidedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesno
obligationorliabilityfortheadvicegivenorresultsobtained.
AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponent
failuresmaystilloccur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryor
property damage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatother
measuresmaynotberequired.
KEMET is a registered trademark of KEMET Electronics Corporation.