Varicon(R) Series 7023 - 0.100" Staggered Dual Row FEATURES * Guide pins facilitate mating, ensure correct alignment * Insulator rigidity reduces p.c. card warp * Insulator maintains exact spacing between contacts * Reduces cost of card punching operation (fewer holes) * Reduces cost of contact staking operation (one operation instead of two) * Reduces assembly time (no plastic strip to remove) * For 116" or 332" p.c. card * Mates with Series 7024 and 7038 Receptacles TECHNICAL SPECIFICATIONS Dielectric Withstanding Voltage: Insulator Material: Sea Level: 1800 Volts rms Diallyl phthalate, glass-filled, flame resistant 3.4" Hg: 675 Volts rms per MIL-M-14F, Type SDGF. Variation 001/002/110/111 Insertion/Withdrawal Force: Thermoplastic Polycarbonate 2 to 16 ounces per contact Variation 003 Operating Temperature: Insulation Resistance: -40C to +125C 25,000 megohms, minimum Current Rating: 10 amperes Contact Resistance: 6 milliohms, maximum Contact Material and Plating: Phosphor Bronze per QQ-B-750, Composition A. Gold, 10 microinches minimum, over nickel, 30 to 100 microinches ORDERING CODE 00 7023 023 000 001 Number of Contacts 017, 023, 029, 035, 041, 047 Contacts used in this connector: MOUNTING LAYOUT DIMENSIONS: Number of Contacts 17 23 29 35 41 47 Card Upper Card Contacts Lower Card Contacts 1/16" 60 7001 29 13 60 7001 28 13 3/32" 60 7001 29 23 60 7001 28 23 Diallyl Phthalate Glass Filled 1/16" Card 3/32" Card 001 110 002 111 millimeters (inches) B C Max. H 2.200 (0.087) 2.800 (0.110) 3.400 (0.134) 4.000 (0.157) 4.600 (0.181) 5.200 (0.205) 2.470 (0.097) 3.070 (0.121) 3.670 (0.144) 4.270 (0.168) 4.870 (0.192) 5.470 (0.215) 1.600 (0.063) 2.200 (0.087) 2.800 (0.110) 3.400 (0.134) 4.000 (0.157) 4.600 (0.181) 9