Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
587
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
ø22 Flush Mount CW Switches & Pilot Devices
Flush bezel projects only 2.5mm from front of panel and as little as 39.9mm behind the panel!
Key features:
• ø22.3mm mounting hole compliant with IEC 60947-5-1
• 3.5-mm operator travel for pushbuttons ensures comfortable and reliable operation
• Up to 6 contacts per switch are possible with use of dual contact blocks
• Black and metallic bezels available
• Illuminated pushbuttons, pushbuttons, pilot lights, selector switches and key
selector switches are available
• Direct opening NC contact
• Seven different keys can be chosen for key selector switches
• 10A contact rating; up to three contact blocks for non-illuminated and two contact
blocks for illuminated models can be connected
• Contact blocks can be removed by locking lever
• IP20 nger-safe screw terminals
• UL Type 4X rating
Applicable Standards Mark File No. or Organization
UL508
CSA C22.2 No.14 UL/c-UL File No. E68961
EN60947-5-1
TÜV SÜD
EC Low Voltage Directive
Specications
Operating Temperature Non-illuminated: –25 to +60°C (no freezing)
LED illuminated: –25 to +55°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Storage Temperature –40 to +80°C
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Overvoltage Category II (IEC 60664-1)
Impulse Withstand Voltage 2.5 kV (IEC60664-1/60947-5-1)
Pollution Degree 3 (IEC60947-5-1)
Vibration Resistance Operating extremes: 5 to 55Hz, amplitude 0.5mm
Shock Resistance Operating extremes: 100m/s2
Damage limits: 1000m/s2
Mechanical Life
(minimum operations)
Pushbutton, illuminated pushbutton: 2,000,000
Selector switch: 250,000
Key selector switch: 250,000
Electrical Life
(minimum operations)
50,000 (see Contact Ratings)
100,000 (see Contact Ratings)
(switching frequency 1800 operations/h)
Degree of Protection (IEC60529) Panel front: IP65
Terminals: IP20 Type 4X
Short-circuit Protection 250V/10A fuse, (Type aM IEC60269-1, IEC602069-2)
Electrical Shock Protection Class II (IEC61140)
Terminal Style Screw terminal (M3.5 slotted Phillips screw)
Bezel Material Polyamide
Applicable Wire Size
Up to 2 wires of 2mm2 (solid wire ø1.6)
maximum (AWG14 to 16)
(Ring terminal cannot be used)
Recommended
Tightening Torque
Terminal: 1.0 to 1.3N·m
Locking ring: 1.2N·m
Contact Ratings
Rated Insulation Voltage (Ui) 300V
Rated Thermal Current (Ith) 10A
Rated Operating Voltage (Ue) 24V 120V 240V
Rated
Operating
Current
(Ie)
Electrical Life
50,000
operations
AC
50/60Hz
Resistive Load
(AC-12) 10A 10A 6A
Inductive Load
(AC-15) 10A 6A 3A
DC
Resistive Load
(DC-12) 8A 2.2A 1.1A
Inductive Load
(DC-13) 4A 1.1A 0.55A
Electrical Life
100,000
operations
AC
50/60Hz
Resistive Load
(AC-12) 5A 5A 3A
Inductive Load
(AC-15) 5A 3A 1.5A
DC
Resistive Load
(DC-12) 4A 1.1A 0.55A
Inductive Load
(DC-13) 2A 0.55A 0.27A
Contact Material Silver
1. Minimum applicable load (reference value): 3V AC/DC, 5mA (Applicable range is subject
to the operating conditions and load.)
2. The operational current represents the classication by making and breaking currents
(IEC 60947-5-1).
3. UL, c-UL rating: A300
Direct Opening of Key Selector Switch
2-position (3NC) 3-position (2NC)
Operator Angle for Direct Opening Action 90° 45°
Minimum Operator Torque for Direct
Opening Action 0.2N·m 0.3N·m
Maximum Operator Angle 90° 45°
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
588 www.IDEC.com 1705151132
Weights
Illuminated Pushbutton 46g (CW1L-M1E02QH, 2 contacts)
62g (CW1L-M1E22QH, 4 contacts)
Pushbutton 45g (CW1B-M1E03, 3 contacts)
52g (CW1B-M1E22, 4 contacts)
Pilot Light 27g (CW1P-1EQH)
Selector Switch 48g (CW1S-2E03, 3 contacts)
55g (CW1S-2E22, 4 contacts)
Key Selector Switch 61g (CW1K-2AE03, 3 contacts)
68g (CW1K-2AE22, 4 contacts)
LED Module
Rated Insulation Voltage (Ui) 250V
Rated Operating Voltage (Ue) 6V AC/DC 12V AC/DC 24V AC/DC 100/120V AC 230/240V AC
Operating Voltage Range 6V AC/DC±10% 12V AC/DC±10% 24V AC/DC±10% 100/120V AC±10% 230/240V AC±10%
Illumination Color Code ➁A (amber), G (green), PW (white), R (red), S (blue)
LED Module Part Number CW-EAQ2➁CW-EAQ3➁CW-EAQ4➁CW-EAQH➁CW-EAQM4➁
Current Draw 15mA 15mA 16.5mA 18mA 18mA
Life (reference value) Approx. 30,000 hours
Internal Circuit
Zener Diode
Resistor
Rectifying Diode
LED Chip
R
R
X2
X1
Capacitor
C
R
X1
X2
R
R
LED Chip
Rectifying Diode
Resistor
Zener Diode
1. Specify an illumination color code in place of ➁ in the part number.
2. Use the white (PW) LED module for yellow illumination.
Contact Blocks
Contact Block Single Contact Block Double Contact Block
Contact 1NO 1NC 2NO 2NC 1NO-1NC
Part No. YW-E10R YW-E01 YW-EW2R0 YW-EW02 YW-EW1R1
Shape
Housing Color Blue/Black Reddish Purple Blue/Black Reddish Purple Reddish Purple/Blue
Push Rod Color Black Red Black Red Gray
Terminal No. 3-4 1-2 1st tier: 13-14
2nd tier: 23-24
1st tier: 11-12
2nd tier: 21-22
1st tier: (NO) 13-14
2nd tier: (NC) 21-22
Weight (approx.) 11g 19g
Degree of Protection
Rating IP65 IP66 IP67 UL Type 4X
Illuminated Pushbutton Yes Yes * Yes * Yes *
Pilot Light Yes Yes No Yes
Pushbutton Yes Yes * Yes * Yes *
Selector Switch Yes Yes Yes Yes
Key Selector Switch Yes Yes No Yes
*When used with rubber boot (CW9Z-D11, -D12)
Mounting Hole Layout
IEC 60947-5-1 compliant
R0.8 max.
0
+0.4
+0.4
0
+0.2
0
30
50
ø22.3
3.2
24.1
Note: Determine mounting centers to
ensure proper spacing.
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
589
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Illuminated Pushbuttons (Assembled)
Style Operating
Voltage
Contact
Conguration Black Bezel Metallic Bezel Illumination Color
Code k
Round Flush
CW0L-01
(black bezel)
(metallic bezel)
6V AC/DC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂1E10Q2k
CW1L-➂1E01Q2k
CW1L-➂1E11Q2k
CW1L-➂1E20Q2k
CW1L-➂1E02Q2k
CW1L-➂1E22Q2k
CW4L-➂1E10Q2k
CW4L-➂1E01Q2k
CW4L-➂1E11Q2k
CW4L-➂1E20Q2k
CW4L-➂1E02Q3k
CW4L-➂1E22Q2k
A: amber
G: green
PW: white
R: red
S: blue
Y: yellow
1. Specify an illumination color code in
place of ➁ in the Part Number.
2. Specify function code in place of ➂
in the Part Number. M: momentary, A:
maintained
3. See page 603 for dimensions.
4. See next page for replacement LED
modules.
5. A dummy block is installed when one
contact block is used.
6. Additional contact congurations
available, contact IDEC for more
details
12V AC/DC
1NO
1NC
1NO-1NC
2NO
2NC
2NO-2NC
CW1L-➂1E10Q3k
CW1L-➂1E01Q3k
CW1L-➂1E11Q3k
CW1L-➂1E20Q3k
CW1L-➂1E02Q3k
CW4L-➂1E10Q3k
CW4L-➂1E01Q3k
CW4L-➂1E11Q3k
CW4L-➂1E20Q3k
CW4L-➂1E02Q3k
24V AC/DC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂1E10Q4k
CW1L-➂1E01Q4k
CW1L-➂1E11Q4k
CW1L-➂1E20Q4k
CW1L-➂1E02Q4k
CW1L-➂1E22Q4k
CW4L-➂1E10Q4k
CW4L-➂1E01Q4k
CW4L-➂1E11Q4k
CW4L-➂1E20Q4k
CW4L-➂1E02Q4k
CW4L-➂1E22Q4k
100/120V AC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂1E10QHk
CW1L-➂1E01QHk
CW1L-➂1E11QHk
CW1L-➂1E20QHk
CW1L-➂1E02QHk
CW1L-➂1E22QHk
CW4L-➂1E10QHk
CW4L-➂1E01QHk
CW4L-➂1E11QHk
CW4L-➂1E20QHk
CW4L-➂1E02QHk
CW4L-➂1E22QHk
230/240V AC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂1E10QM4k
CW1L-➂1E01QM4k
CW1L-➂1E11QM4k
CW1L-➂1E20QM4k
CW1L-➂1E02QM4k
CW4L-➂1E22QM4k
CW4L-➂1E10QM4k
CW4L-➂1E01QM4k
CW4L-➂1E11QM4k
CW4L-➂1E20QM4k
CW4L-➂1E02QM4k
CW4L-➂1E22QM4k
Round Extended
CW0L-02
(black bezel)
(metallic bezel)
6V AC/DC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂2E10Q2k
CW1L-➂2E01Q2k
CW1L-➂2E11Q2k
CW1L-➂2E20Q2k
CW1L-➂2E02Q2k
CW1L-➂2E22Q2k
CW4L-➂2E10Q2k
CW4L-➂2E01Q2k
CW4L-➂2E11Q2k
CW4L-➂2E20Q2k
CW4L-➂2E02Q2k
CW4L-➂2E22Q2k
A: amber
G: green
PW: white
R: red
S: blue
Y: yellow
12V AC/DC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂2E10Q3k
CW1L-➂2E01Q3k
CW1L-➂2E11Q3k
CW1L-➂2E20Q3k
CW1L-➂2E02Q3k
CW1L-➂2E22Q3k
CW4L-➂2E10Q3k
CW4L-➂2E01Q3k
CW4L-➂2E11Q3k
CW4L-➂2E20Q3k
CW4L-➂2E02Q3k
CW4L-➂2E22Q3k
24V AC/DC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂2E10Q4k
CW1L-➂2E01Q4k
CW1L-➂2E11Q4k
CW1L-➂2E20Q4k
CW1L-➂2E02Q4k
CW1L-➂2E22Q4k
CW4L-➂2E10Q4k
CW4L-➂2E01Q4k
CW4L-➂2E11Q4k
CW4L-➂2E20Q4k
CW4L-➂2E02Q4k
CW4L-➂2E22Q4k
100/120V AC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂2E10QH➁
CW1L-➂2E01QHk
CW1L-➂2E11QHk
CW1L-➂2E20QHk
CW1L-➂2E02QHk
CW1L-➂2E22QHk
CW4L-➂2E10QHk
CW4L-➂2E01QHk
CW4L-➂2E11QHk
CW4L-➂2E20QHk
CW4L-➂2E02QHk
CW4L-➂2E22QHk
230/240V AC
1NO
1NC
1NO-1NC
2NO
2NC
2N0-2NC
CW1L-➂2E10QM4k
CW1L-➂2E01QM4k
CW1L-➂2E11QM4k
CW1L-➂2E20QM4k
CW1L-➂2E02QM4k
CW1L-➂2E22QM4k
CW4L-➂2E10QM4k
CW4L-➂2E01QM4k
CW4L-➂2E11QM4k
CW4L-➂2E20QM4k
CW4L-➂2E02QM4k
CW4L-➂2E22QM4k
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
590 www.IDEC.com 1705151132
Illuminated Pushbuttons (Sub-assembled)
Contact Blocks + LED Module + Mounting Adapter + Operator + Lens = Completed Unit
Contact Blocks
Style Contacts Contact
Block
Contact
Conguration
Part
Number
Finger-
safe
screw
terminal
Single
1NO YW-E10R
1NC YW-E01
Double
2NO YW-
EW2R0
2NC YW-EW02
1N0-1NC YW-
EW1R1
Dummy block CW-DB
LED Module
Style Part Number
CW-EAQ ➁➀
1. In place of ➀, specify the Lens/LED Color Code
from table.
2. In place of ➁, specify the Voltage Code from table.
3. Use PW LED for yellow lens.
Contact Block Mounting Adaptor
Style Part Number
CW-CN
Operators
Style Black
Bezel
Metallic
Bezel
Momentary
Round Flush CW1L-M10 CW4L-M10
Round Extended CW1L-M20 CW4L-M20
Maintained
Round Flush CW1L-A10 CW4L-A10
Round Extended CW1L-A20 CW4L-A20
Lens
Style Part Number
Round
Flush CW9Z-L11j
Round
Extended CW9Z-L12j
1. In place of ➀, specify the Lens/LED Color
Code from table.
j Lens/LED
Color Code
Color Code
Amber A
Green G
Red R
Blue S
White* PW or C
Yellow Y
*Use PW for LED module, use C
for lens.
k Voltage Code
Voltage Code
6V AC/DC 2
12V AC/DC 3
24V AC/DC 4
100/120V AC H
230/240V AC M4
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
591
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Non-Illuminated Pushbuttons (Assembled)
Style Contact
Conguration Black Bezel Metallic Bezel Button Color Code ➀
Round Flush
CW0B-01
(black bezel)
1NO CW1B-➂1E10jCW4B-➂1E10j
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1. Specify a button color code in place of ➀ in the part
number.
2. Specify function code in place of ➂ in the Part
Number. M: momentary, A: maintained
3. See page 604 for dimensions.
4. Two dummy blocks are installed when one
contact is used and one dummy block in
installed when two contact blocks are used.
5. *These contact congurations are not available in
maintained action
6. Additional contact congurations available; contact
IDEC for more details.
1NC CW1B-➂1E01jCW4B-➂1E01j
1NO-1NC CW1B-➂1E11jCW4B-➂1E11j
2NO CW1B-➂1E20jCW4B-➂1E20j
2NC CW1B-➂1E02jCW4B-➂1E02j
2NO-1NC* CW1B-M1E21jCW4B-M1E21j
1NO-2NC* CW1B-M1E12jCW4B-M1E12j
3NO* CW1B-M1E30jCW4B-M1E30j
3NC* CW1B-M1E03jCW4B-M1E03j
2NO-2NC CW1B-➂1E22j CW4B-➂1E22j
Round Extended
CW0B-02
(metallic bezel)
1NO CW1B-➂2E10jCW4B-➂2E10j
1NC CW1B-➂2E01jCW4B-➂2E01j
1NO-1NC CW1B-➂2E11jCW4B-➂2E11j
2NO CW1B-➂2E20jCW4B-➂2E20j
2NC CW1B-➂2E02jCW4B-➂2E02j
2NO-1NC* CW1B-M2E21jCW4B-M2E21j
1NO-2NC* CW1B-M2E12jCW4B-M2E12j
3NO* CW1B-M2E30jCW4B-M2E30j
3NC* CW1B-M2E03jCW4B-M2E03j
2NO-2NC CW1B-M2E22jCW4B-➂2E22j
Non-Illuminated Pushbuttons (Sub-assembled)
Contact Blocks + Mounting Adaptor + Operator = Completed Unit
Contact Blocks
Style Contacts Contact
Block
Contact
Conguration
Part
Number
Finger-
safe
screw
terminal
Single
1NO YW-E10R
1NC YW-E01
Double
2NO YW-
EW2R0
2NC YW-EW02
1N0-1NC YW-
EW1R1
Dummy block CW-DB
Operators*
Style Black Bezel Metallic Bezel
Momentary
Round Flush CW1B-M1➀CW4B-M1➀
Round Extended CW1B-M2➀CW4B-M2➀
Maintained
Round Flush CW1B-A1➀CW4B-A1➀
Round Extended CW1B-A2➀CW4B-A2➀
1. Specify a button color code in place of ➀.
2. *Operator button is not removable from operator.
j Button Color Code
Color Code
Black B
Green G
Red R
Blue S
White W
Yellow Y
Style Part Number
CW-CN
Contact Block Mounting Adaptor
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
592 www.IDEC.com 1705151132
Pilot Lights (Assembled)
Style Operating Voltage Black Bezel Metallic Bezel Illumination Color Code k
Round Flush Lens
CW0P-1
(black bezel)
6V AC/DC CW1P-1EQ2kCW4P-1EQ2k
A: amber
G: green
R: red
S: blue
PW: white
Y: yellow
1. Specify an illumination color code in place of
➁ in the Part Number
2. See page 604 for dimensions.
3. See page 602 for replacement LED modules.
4. Two dummy blocks are installed.
12V AC/DC CW1P-1EQ3kCW4P-1EQ3k
24V AC/DC CW1P-1EQ4kCW4P-1EQ4k
100/120V AC CW1P-1EQHkCW4P-1EQHk
230/240V AC CW1P-1EQM4kCW4P-1EQM4k
Round Dome Lens
CW0P-2
(metallic bezel)
6V AC/DC CW1P-2EQ2kCW4P-2EQ2k
12V AC/DC CW1P-2EQ3kCW4P-2EQ3k
24V AC/DC CW1P-2EQ4kCW4P-2EQ4k
100/120V AC CW1P-2EQHkCW4P-2EQHk
230/240V AC CW1P-2EQM4kCW4P-2EQM4k
Pilot Lights (Sub-assembled)
Contact Blocks* + LED Module + Mounting Adapter + Operator + Lens = Completed Unit
* 2 dummy blocks are required for each completed pilot light.
Contact Block
Style Contacts Part Number
Dummy Block CW-DB
LED Module
Style Part Number
CW-EAQ ➁➀
1. In place of ➀, specify the Lens/LED Color
Code from table.
2. In place of ➁, specify the Voltage Code
from table.
3. Use PW LED for yellow lens.
Contact Block Mounting Adaptor
Style Part Number
CW-CN
Operators
Style Black
Bezel
Metallic
Bezel
CW1P-00 CW4P-00
Lens
Style Part Number
Round
Flush CW9Z-L11j
Round
Dome CW9Z-L15j
1. In place of ➀, specify the Lens/LED Color
Code from table.
j Lens/LED
Color Code
Color Code
Amber A
Green G
Red R
Blue S
White* PW or C
Yellow Y
k Voltage Code
Voltage Code
6V AC/DC 2
12V AC/DC 3
24V AC/DC 4
100/120V AC H
230/240V AC M4
*Use PW for LED module, use C for lens.
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
593
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Selector Switches (Assembled)
Shape
CW0S
(Knob Operator)
(black bezel) (metallic bezel)
No. of Positions Contact
Conguration
Contact Block Operator Position
LR
Maintained
LR
Spring return
from right
Mounting
Position Type L R
90° 2-position
1NO
(10)
1 NO
CW0S-2E10 CW0S-21E10
2 — Dummy
3 — Dummy
1NC
(01)
1 — Dummy
CW0S-2E01 CW0S-21E01
2 — Dummy
3 NC
1NO-1NC
(11)
1 NO
CW0S-2E11 CW0S-21E11
2 — Dummy
3 NC
2NO
(20)
1 NO
CW0S-2E20 CW0S-21E20
2 — Dummy
3 NO
2NC
(02)
1 NC
CW0S-2E02 CW0S-21E02
2 — Dummy
3 NC
2NO-1NC
(21)
1 NO
CW0S-2E21 CW0S-21E21
2 NO
3 NC
1NO-2NC
(12)
1 NO
CW0S-2E12 CW0S-21E12
2 NC
3 NC
3NO
(30)
1 NO
CW0S-2E30 CW0S-21E30
2 NO
3 NO
3NC
(03)
1 NC
CW0S-2E03 CW0S-21E03
2 NC
3 NC
2NO-2NC
(22)
1NO/
NC
NC
CW0S-2E22 CW0S-21E22
NC
2 — Dummy
NO/
NC
NO
3 NC
4NO
(40)
1 2NO NO
CW0S-2E40 CW0S-2E40
NO
2 — Dummy
3 2NO NO
NO
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
594 www.IDEC.com 1705151132
Selector Switches (Assembled) con’t
No. of
Positions
Contact
Conguration
Contact Block Operator
Position
C
LR
Maintained
C
LR
Spring return
from right
C
LR
Spring return
from left
Spring return
two-way
Mounting
Position Type L C R
45°
3-position
1NO-1NC
(11)
1 NO
CW0S-3E11 CW0S-31E11 CW0S-32E11 CW0S-33E11
2 — Dummy
3 NC
1NO-1NC
(11N1)
1 NC
CW0S-3E11N1 CW0S-31E11N1 CW0S-32E11N1 CW0S-33E11N1
2 — Dummy
3 NO
1NO-1NC
(11N2)
1 NO
CW0S-3E11N2 CW0S-31E11N2 CW0S-32E11N2 CW0S-33E11N2
2 NC
3 — Dummy
1NO-1NC
(11N3)
1 — Dummy
CW0S-3E11N3 CW0S-31E11N3 CW0S-32E11N3 CW0S-33E11N3
2 NC
3 NO
1NO-1NC
(11N4)
1 — Dummy
CW0S-3E11N4 CW0S-31E11N4 CW0S-32E11N4 CW0S-33E11N4
2 NO
3 NC
2NO
(20)
1 NO
CW0S-3E20 CW0S-31E20 CW0S-32E20 CW0S-33E20
2 — Dummy
3 NO
2NO
(20N1)
1 — Dummy
CW0S-3E20N1 CW0S-31E20N1 CW0S-32E20N1 CW0S-33E20N1
2 NO
3 NO
2NC
(02)
1 NC
CW0S-3E02 CW0S-31E02 CW0S-32E02 CW0S-33E02
2 — Dummy
3 NC
2NC
(02N1)
1 — Dummy
CW0S-3E02N1 CW0S-31E02N1 CW0S-32E02N1 CW0S-33E02N1
2 NC
3 NC
2NO-1NC
(21)
1 NO
CW0S-3E21 CW0S-31E21 CW0S-32E21 CW0S-33E21
2 NO
3 NC
2NO-1NC
(21N1)
1 NO
CW0S-3E21N1 CW0S-31E21N1 CW0S-32E21N1 CW0S-33E21N1
2 NC
3 NO
1NO-2NC
(12)
1 NO
CW0S-3E12 CW0S-31E12 CW0S-32E12 CW0S-33E12
2 NC
3 NC
1NO-2NC
(12N1)
1 NC
CW0S-3E12N1 CW0S-31E12N1 CW0S-32E12N1 CW0S-33E12N1
2 NO
3 NC
3NO
(30)
1 NO
CW0S-3E30 CW0S-31E30 CW0S-32E30 CW0S-33E30
2 NO
3 NO
3NC
(03)
1 NC
CW0S-3E03 CW0S-31E03 CW0S-32E03 CW0S-33E03
2 NC
3 NC
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
595
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Selector Switches (Assembled) con’t
No. of
Positions
Contact
Conguration
Contact Block Operator
Position
C
LR
Maintained
C
LR
Spring return
from right
C
LR
Spring return
from left
Spring return
two-way
Mounting
Position Type L C R
45°
3-position
2NO-2NC
(22)
1NO/
NC
NO
CW0S-3E22 CW0S-31E22 CW0S-32E22 CW0S-33E22
NC
2 — Dummy
3NO/
NC
NO
NC
4NO
(40)
1 2NO NO
CW0S-3E40 CW0S-31E40 CW0S-32E40 CW0S-33E40
NO
2 — Dummy
3 2NO NO
NO
2NO-2NC
(22N2)
1 2NC NC
CW0S-3E22N2 CW0S-31E22N2 CW0S-32E22N2 CW0S-33E22N2
NC
2 — Dummy
3 2NO NC
NC
1. Specify a bezel color code in place of 0 in the Part Number, 1 (black bezel), 4 (metallic bezel)
2. For the contact block mounting position, see below.
3. Lever operator is also available. For dimensions, see page 605.
4. To order a lever operator selector switch, insert L before E in the knob operator part number.
Example: Knob Operator part number CW1S-3E11 becomes CW1S-3LE11 for Lever Operator.
123 Left Center Right
L C R
1 NO
2 NC
3 NC
Operator
Position
Contact Block Mounting Position
CW1S-0L
(black bezel)
CW4S-0L
(metallic bezel)
Lever Operator
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
596 www.IDEC.com 1705151132
Selector Switches (Sub-assembled)
Contact Block + Mounting Adaptor + Operator = Completed Unit
Contact Blocks
Style Contacts Contact
Block
Contact
Conguration
Part
Number
Finger-
safe
screw
terminal
Single
1NO YW-E10R
1NC YW-E01
Double
2NO YW-
EW2R0
2NC YW-EW02
1N0-1NC YW-
EW1R1
Dummy block CW-DB
Contact Block Mounting Adaptor
Style Part Number
CW-CN
Operators
Style Position Handle Description Black Bezel Metallic Bezel
(knob operator shown)
2-position
Knob Maintained CW1S-2 CW4S-2
Spring return from right CW1S-21 CW4S-21
Lever Maintained CW1S-2L CW4S-2L
Spring return from right CW1S-21L CW4S-21L
3-position
Knob
Maintained CW1S-3 CW4S-3
Spring return from right CW1S-31 CW4S-31
Spring return from left CW1S-32 CW4S-32
Spring return two-way CW1S-33 CW4S-33
Lever
Maintained CW1S-3L CW4S-3L
Spring return from right CW1S-31L CW4S-31L
Spring return from left CW1S-32L CW4S-32L
Spring return two-way CW1S-33L CW4S-33L
Lever or knob is supplied with operator.
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
597
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Key Selector Switches (Assembled)
Shape
CW0K
(black bezel) (metallic bezel)
No. of Positions Contact
Conguration
Contact Block Operator Position
LR
Maintained
LR
Spring return
from right
Mounting
Position Type L R
90° 2-position
1NO
(10)
1 NO
CW0K-2AE10 CW0K-21BE10
2 — Dummy
3 — Dummy
1NC
(01)
1 — Dummy
CW0K-2AE01 CW0K-21BE01
2 — Dummy
3 NC
1NO-1NC
(11)
1 NO
CW0K-2AE11 CW0K-21BE11
2 — Dummy
3 NC
2NO
(20)
1 NO
CW0K-2AE20 CW0K-21BE20
2 — Dummy
3 NO
2NC
(02)
1 NC
CW0K-2AE02 CW0K-21BE02
2 — Dummy
3 NC
2NO-1NC
(21)
1 NO
CW0K-2AE21 CW0K-21BE21
2 NO
3 NC
1NO-2NC
(12)
1 NO
CW0K-2AE12 CW0K-21BE12
2 NC
3 NC
3NO
(30)
1 NO
CW0K-2AE30 CW0K-21BE30
2 NO
3 NO
3NC
(03)
1 NC
CW0K-2AE03 CW0K-21BE03
2 NC
3 NC
1 NO/NC NO
NC
2NO-2NC
(22) 2 — Dummy CW0K-2AE22 CW0K-21BE22
3 NO/NC NO
NC
1 2NO NO
NO
4NO
(40) 2 — Dummy CW0K-2AE40 CW0K-21BE40
3 2NO NO
NO
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
598 www.IDEC.com 1705151132
Key Selector Switches (Assembled) con’t
No. of
Positions
Contact
Conguration
Contact Block Operator
Position C
LR
Maintained
C
LR
Spring return
from right
C
LR
Spring return
from left
C
LR
Spring return
two-way
Mounting
Position Type L C R
45°
3-position
1NO-1NC
(11)
1 NO
CW0K-3AE11 CW0K-31BE11 CW0K-32CE11 CW0K-33DE11
2 — Dummy
3 NC
1NO-1NC
(11N1)
1 NC
CW0K-3AE11N1 CW0K-31BE11N1 CW0K-32CE11N1 CW0K-33DE11N1
2 — Dummy
3 NO
1NO-1NC
(11N2)
1 NO
CW0K-3AE11N2 CW0K-31BE11N2 CW0K-32CE11N2 CW0K-33DE11N2
2 NC
3 — Dummy
1NO-1NC
(11N3)
1 — Dummy
CW0K-3AE11N3 CW0K-31BE11N3 CW0K-32CE11N3 CW0K-33DE11N3
2 NC
3 NO
1NO-1NC
(11N4)
1 — Dummy
CW0K-3AE11N4 CW0K-31BE11N4 CW0K-32CE11N4 CW0K-33DE11N4
2 NO
3 NC
2NO
(20)
1 NO
CW0K-3AE20 CW0K-31BE20 CW0K-32CE20 CW0K-33DE20
2 — Dummy
3 NO
2NO (20N1)
1 — Dummy
CW0K-3AE20N1 CW0K-31BE20N1 CW0K-32CE20N1 CW0K-33DE20N1
2 NO
3 NO
2NC
(02)
1 NC
CW0K-3AE02 CW0K-31BE02 CW0K-32CE02 CW0K-33DE02
2 — Dummy
3 NC
2NC (02N1)
1 — Dummy
CW0K-3AE02N1 CW0K-31BE02N1 CW0K-32CE02N1 CW0K-33DE02N1
2 NC
3 NC
2NO-1NC (21)
1 NO
CW0K-3AE21 CW0K-31BE21 CW0K-32CE21 CW0K-33DE21
2 NO
3 NC
2NO-1NC
(21N1)
1 NO
CW0K-3AE21N1 CW0K-31BE21N1 CW0K-32CE21N1 CW0K-33DE21N1
2 NC
3 NO
1NO-2NC (12)
1 NO
CW0K-3AE12 CW0K-31BE12 CW0K-32CE12 CW0K-33DE12
2 NC
3 NC
1NO-2NC
(12N1)
1 NC
CW0K-3AE12N1 CW0K-31BE12N1 CW0K-32CE12N1 CW0K-33DE12N1
2 NO
3 NC
3NO
(30)
1 NO
CW0K-3AE30 CW0K-31BE30 CW0K-32CE30 CW0K-33DE30
2 NO
3 NO
3NC
(03)
1 NC
CW0K-3AE03 CW0K-31BE03 CW0K-32CE03 CW0K-33DE03
2 NC
3 NC
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
599
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Key Selector Switches (Assembled) con’t
No. of
Positions
Contact
Conguration
Contact Block Operator
Position C
LR
Maintained
C
LR
Spring return
from right
C
LR
Spring return
from left
C
LR
Spring return
two-way
Mounting
Position Type L C R
90° 2-position
2NO-2NC
(22)
1 NO/NC NO
CW0K-3AE22 CW0K-31BE22 CW0K-32CE22 CW0K-33DE22
NC
2 — Dummy
3 NO/NC NO
NC
4NO
(40)
1 2NO NO
CW0K-3AE40 CW0K-31BE40 CW0K-32CE40 CW0K-33DE40
NO
2 — Dummy
3 2NO NO
NO
2NO-2NC
(22N2)
1 2NC NC
CW0K-3AE22N2 CW0K-31BE22N2 CW0K-32CE22N2 CW0K-33DE22N2
NC
2 — Dummy
3 2NC NC
NC
1. Specify a bezel color code in place of 0 in the Part Number: 1 (black bezel), 4 (metallic
bezel).
2. On the spring-returned models, the key can be released only from the maintained
position. On the maintained models, the key can be released from any position. Key
retained positions are also available. See below.
3. Two keys are supplied.
4. Key cylinder material: Metal
5. Besides the standard key (key number 0H), six other keys are also available. See below.
6. For the contact block mounting position, see right.
7. For dimensions, see page 606.
8. When ordering an optional key or optional key-retained positions, specify designation
codes as shown below:
Example: CW1K-2AE10-1H
Contact Block Mounting Position
123 Left Center Right
L C R
1 NO
2 NC
3 NC
Operator
Position
blank: Standard key (0H, reversible)
1H to 2H: Reversible key
3H to 6H: Non-reversible key
Note:
Key number is indicated on the key cylinder.
Standard keys do not have a key number indication.
Key removal position code
2-position
A: Removable in all positions
B: Removable in left only
C: Removable in right only
3-position
A: Removable in all positions
B: Removable in left and center
C: Removable in right and center
D: Removable in center only
E: Removable in right and left
G: Removable in left only
H: Removable in right only
Note: Key is retained in all spring-returned positions.
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
600 www.IDEC.com 1705151132
Key Selector Switches (Sub-assembled)
Contact Block + Mounting Adaptor + Operator = Completed Unit
Contact Blocks
Style Contacts Contact
Block
Contact
Conguration
Part
Number
Finger-
safe
screw
terminal
Single
1NO YW-E10R
1NC YW-E01
Double
2NO YW-
EW2R0
2NC YW-EW02
1N0-1NC YW-
EW1R1
Dummy block CW-DB
Contact Block Mounting Adaptor
Style Part Number
CW-CN
Operator
Style Position Description Black Bezel Metallic Bezel
2-position
Maintained, key removable all positions CW1K-2A CW4K-2A
Maintained, key removable left position only CW1K-2B CW4K-2B
Maintained, key removable right position only CW1K-2C CW4K-2C
Spring return from right CW1K-21B CW4K-21B
3-position
Maintained, key removable all positions CW1K-3A CW1K-3A
Maintained, key removable left and center positions only CW1K-3B CW4K-3B
Maintained, key removable right and center positions only CW1K-3C CW4K-3C
Maintained, key removable center position only CW1K-3D CW4K-3D
Maintained, key removable left and right positions only CW1K-3E CW4K-3E
Maintained, key removable left position only CW1K-3G CW4K-3G
Maintained, key removable right position only CW1K-3H CW4K-3H
Spring return from right, key removable left and center positions only CW1K-31B CW4K-31B
Spring return from right, key removable center position only CW1K-31D CW4K-31D
Spring return from right, key removable left position only CW1K-31G CW4K-31G
Spring return from left, key removable right and center positions only CW1K-32C CW4K-32C
Spring return from left, key removable center position only CW1K-32D CW4K-32D
Spring return from left, key removable right position only CW1K-32H CW4K-32H
Spring return two-way, key removable center position only CW1K-33D CW4K-33D
Two keys supplied with operator.
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
601
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Accessories
Item Appearance Material Part Number Remarks
Locking
Ring
Wrench
Brass MW9Z-T1
• Used to tighten the locking ring when installing
the CW series control unit in a panel cut-out
• Weight: Approx 150g
ø28
110
Mounting
Hole Plug
Polyamide
(black) LW9Z-BP1
• Used to plug an unnecessary ø22.3mm hole in the panel
• Degree of protection: IP65
• Panel thickness: 0.8 to 6.0mm
Replacement Parts
Shape Material Part Number Remarks
Lens
13
2
1 Round
Flush Polyalylate CW9Z-L11kColor code k: A (amber), C (clear), G (green), R (red), S (blue), Y (yellow)
Use a clear (C) lens for white (PW) illumination.
1: For illuminated pushbutton, pilot light
2: For illuminated pushbutton
3: For pilot light
2 Round
Extended Polyalylate CW9Z-L12k
3 Round
Dome Polyalylate CW9Z-L15k
Single Contact Block
Push rod Housing
1NO YW-E10R
Push rod color: Black
Housing color: Blue/black
Terminal No.: 3-4
1NC YW-E01
Push rod color: Red
Housing color: Reddish purple
Terminal No.: 1-2
Double Contact Block
Push rod Housing
2NO YW-EW2R0
Push rod color: black
Housing color: blue and black
Terminal No. 1st tier: 13-14, 2nd tier: 23-24
2NC YW-EW02
Push rod color: red
Housing color: reddish purple
Terminal No. 1st tier: 11-12, 2nd tier: 21-22
1NO, 1NC YW-EW1R1
Push rod color: gray
Housing color: reddish purple/blue
Terminal No. 1st tier: 13-14, 2nd tier: 21-22
Rubber
Boot
(clear)
Round
Flush
Round
Extended
CW9Z-D11
CW9Z-D12
Dummy
Block Polyamide
(black) CW-DB
Locking
Ring Polyamide
(black) CW9Z-LN
Gasket
Nitrile rubber CW9Z-WM Waterproof gasket between CW control unit bezel and the mounting panel.
Nameplate
Plastic CWAM-OB
Spare Key
Reversible
Non-reversible Zinc
(nickel-plated) LA9Z-SK-0
Specify a key No. in place of 0.
0H: Standard key (reversible)
1H to 2H: Reversible key
3H to 6H: Non-reversible key
For dimensions, see page 606.
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
602 www.IDEC.com 1705151132
LED Modules
Shape Operating Voltage Range Current Draw Part Number Illumination Color Code k
6V AC/DC±10% 15mA CW-EAQ2kSpecify an illumination color code
in place of k in the Part Number
A: amber
G: green
PW: white
R: red
S: blue
12V AC/DC±10% 15mA CW-EAQ3k
24V AC/DC±10% 16.5mA CW-EAQ4k
100/120V AC±10% 18mA CW-EAQHk
230/240V AC±10% 18mA CW-EAQM4k
Nameplate Standard Legend Codes
CWAM–Black Plastic
Pushbuttons Pushbuttons/Selector Switches Selector Switches
Legend Code Legend Code Legend Code Legend Code Legend Code
AUTO
CLOSE
DOWN
EMERG.
STOP
FAST
FORWARD
HAND
HIGH
IN
INCH
JOG
LOW
LOWER
OFF
ON
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
OPEN
OUT
RAISE
RESET
REVERSE
RUN
SLOW
START
STOP
TEST
UP
I (Int’l On)
O (Int’l
Off)
EMO
116
117
118
119
120
121
122
123
125
126
127
150
151
152
AUTO-MAN
CLOSE-OPEN
DOWN-UP
FAST-SLOW
FOR-REV
HAND-AUTO
HIGH-LOW
JOG-RUN
LEFT-RIGHT
LOWER-
RAISE
MAN-AUTO
OFF-ON
ON-OFF
OPEN-CLOSE
RAISE-
LOWER
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
REV-FOR
RUN-JOG
RUN-SAFE
SAFE-RUN
SLOW-FAST
START-STOP
STOP-START
UP-DOWN
OI (Int’l OFF
ON)
216
217
218
219
220
221
222
223
250
AUTO-MAN-OFF
AUTO-OFF-MAN
CLOSE-OFF-OPEN
DOWN-OFF-SLOW
FAST-OFF-SLOW
FOR-OFF-REV
LEFT-OFF-RIGHT
LOWER-OFF-RAISE
OFF-MAN-AUTO
OFF-SLOW-FAST
OFF-1-2
OPEN-OFF-CLOSE
SLOW-OFF-FAST
SUMMER-OFF-
WINTER
UP-OFF-DOWN
1-OFF-2
HAND-OFF-AUTO
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
1. To order engraved nameplates, add legend code to nameplate part number.
2. Character height based on the number of characters and size of nameplate. Standard character size is 3/16”.
3. Nameplates with standard legends are the same list price as blank nameplates.
29
27 2.7
12.1
3014
ø22.2
0.7
Nameplate
(blank
engraving
plate
included)
CWAM-OB
Nameplate
(engraved) CWAM-j
Additional
Insert
(blank)
HWNP-O HWNP
Dimensions
27
12
Additional
Insert
(engraved)
HWNP-j
1. In place of j, insert either the standard legend
code from table below or custom engraving
delimited by “ “.
2. Standard engravings are available at no charge.
Nameplates Order Form — CW Series
Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired.
To ensure engraving accuracy, fax it to your IDEC representative or Distributor.
Your Company: IDEC Rep/Distributor Contact:
Name: PO number (if known):
Telephone: IDEC Rep/Distributor Phone:
Fax & Email: IDEC Rep/Distributor Fax & Email:
CWAM Nameplate
Engraving
Location
Step 1.
Choose Letter Size - 7/64” or 1/8”.
Check the box for the letter size you want.
Then write your lettering in box below the
check boxes. Note: 1/8” size letters cannot
exceed 9 characters.
7/64”
Letter
Size
11 characters maximum
(for 7/64” size letters)
1/8”
Letter
Size
9 characters maximum
(for 7/8” size letters)
Step 2.
Specify Quantity.
Enter the number of nameplates
desired in the box on the right. 1 2 3 4 5 6 7 8 9 10 11
Sample Letter Sizes
7/64” Letters: A B C D
1/8” Letters: A B C D
Qty
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
603
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Dimensions (mm)
Illuminated Pushbuttons
1 to 3 Contacts
Round Flush Round Extended
101010
2.5
41.4
28.5
30
0.5
LOCK
M3.5 Terminal Screw
Contact Block
M3.5
Terminal Screw
LED Module
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Momentary: 39.9
Maintained: 44.6
ø28
ø19.5
(Lens Diameter)
0.5
101010
2.5
5.2
41.4
28.5
30
1
2
3
LOCK
M3.5 Terminal Screw
Contact Block
M3.5
Terminal Screw
LED Module
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Momentary: 39.9
Maintained: 44.6
ø28
ø19.5
(Lens Diameter)
4 to 6 Contacts
Round Flush Round Extended
LOCK
10 10
10
2nd-tier
contact block (NC) 1st-tier
contact block (NO)
0.5
2.5
41.4
28.5
30
M3.5 Terminal Screw
Contact Block Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Momentary: 59.9
Maintained: 64.6
ø28
ø19.5
(Lens Diameter)
LOCK
0.5
2.5
5.2
28.5
41.4 101010
30
M3.5 Terminal Screw
Contact Block Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Momentary: 59.9
Maintained: 64.6
ø28
ø19.5
(Lens Diameter)
2nd-tier
contact block (NC)
1st-tier
contact block (NO)
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
604 www.IDEC.com 1705151132
Pushbuttons
1 to 3 Contacts
Round Flush Round Extended
2.5
0.5
30 30
LOCK
LOCK
M3.5 Terminal Screw
Contact Block
Panel Thickness 0.8 to 3.2
Momentary Maintained
Locking Ring Gasket
Momentary: 39.9
Maintained: 44.6
ø28
1010
41.4
28.5
28.5
10
ø19.5
(Button Diameter
)
2.5
0.5
5.23
03
0
LOCK
LOCK
M3.5 Terminal Screw
Contact Block
Panel Thickness 0.8 to 3.2
Momentary Maintained
Locking Ring Gasket
Momentary: 39.9
Maintained: 44.6
ø28
10101041.4
28.5
28.5
ø19.5
(Button Diameter)
4 to 6 Contacts
Round Flush Round Extended
LOCK
LOCK
M3.5 Terminal Screw
Contact Block Panel Thickness 0.8 to 3.2
Momentary Maintained
Locking Ring Gasket
2.5
0.5
30 30
Momentary: 59.9
Maintained: 64.6
28.5
101010
41.4
28.5
ø28
ø19.5
(Button Diameter)
2nd-tie
r
contact block (NC)
1st-tier
contact block (NO)
0.5
28.5
28.5
M3.5 Terminal Screw
Contact Block Panel Thickness 0.8 to 3.2
Locking Ring Gasket
2.5
30 30
5.2
Momentary: 59.9
Maintained: 64.6
ø28
ø19.5
41.4 101010
(Button Diameter)
2nd-tier
contact block (NC)
1st-tier
contact block (NO)
LOCK
LOCK
Momentary Maintained
Pilot Lights
Round Flush Round Dome
0.5
10
2.539.9
41.4
ø19.5
ø28
28.5
30
1010
1
2
3
M3.5
Terminal Scre
w
LED Module
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
(Lens Diameter)
LOCK
0.5
101010
1
2
3
4.139.9
41.4
ø19.5
ø28
28.5
30
2.5
M3.5
Terminal Scre
w
LED Module
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
(Lens Diameter)
LOCK
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
605
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Selector Switches
1 to 3 Contacts
Knob Operator Lever Operator
0.5
2.5
39.9
41.4
ø28
13.1
1
2
3
28.5
30
45°
45°
101010
M3.5 Terminal Screw
Contact Block
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Operator Angle
LOCK
0.5
1010
10
1
2
3
2.5
39.9
41.4
ø28
28.5
30
17.1
45°
45°
M3.5 Terminal Screw
Contact Block
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Operator Angle
LOCK
4 to 6 Contacts
Knob Operator Lever Operator
28.5
41.4 101010
30
59.9
2.5
0.5
13.1
45º
45º
Panel Thickness 0.8 to 3.2
M3.5 Terminal Screw
Contact Block
Locking Ring Gasket
Operator Angle
ø28
2nd-tier
contact block (NC)
1st-tier
contact block (NO)
LOCK
30
59.9
2.5
17.1
45º
45º
Panel Thickness 0.8 to 3.2
M3.5 Terminal Screw
Contact Block
Locking Ring Gasket
0.5
Operator Angle
2nd-tier
contact block (NC) 1st-tier
contact block (NO)
LOCK
28.5
ø28
41.4
101010
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
606 www.IDEC.com 1705151132
Key Selector Switches
1 to 3 Contacts Keys
0.5
101010
1
2
3
2.5
39.9
41.4
ø28
10.4
28.5
30
45°
45°
31.5
Key No.: 0H to 2H (reversible key)
Key No.: 3H to 6H (non-reversible key)
1.5
31.5
M3.5 Terminal Screw
Contact Bloc
k
Panel Thickness 0.8 to 3.2
Locking Ring Gasket
Operator Angle
LOCK
Reversible Key
22
Logo Stamping
Key No. Stamping
Logo Stamping
Key No. Stamping
Key No.
Key No.
8.8
14
228.8
14
6.3 4.8
0 H
3 H
Non-reversible Key
22
Logo Stamping
Key No. Stamping
Logo Stamping
Key No. Stamping
Key No.
Key No.
8.8
14
228.8
14
6.3 4.8
0 H
3 H
4 to 6 Contacts
28.5
10.4
31.5
2.5
30
59.9
41.4 101010
Locking Ring Gasket
45º
45º
LOCK
Operator Angle
ø28
0.5
Panel Thickness 0.8 to 3.2
M3.5 Terminal Screw
Contact Block
2nd-tier
contact block (NC) 1st-tier
contact block (NO)
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
607
800-262-IDEC (4332) • USA & Canada
ø22mm - CW Series
Switches & Pilot Devices
1705151132
Safety Precautions
Turn off the power to CW series switches before installation, removal, wiring
and maintenance. Failure to turn power off may cause electrical shocks or re
hazard.
When wiring, use wires of a proper size to meet the voltage and current require-
ments. Tighten the M3.5 terminal screws to a tightening torque of 1.0 to 1.3
N·m. Failure to tighten the terminal screws may cause overheating and re.
Operating Instructions
Notes for Operation
When using the CW series switches in a safety-
related circuit of a control system, observe safety
rules and regulations of each country concerning
particular applications of the actual machines and
facilities. Perform risk assessment before operation
to ensure safety.
Operating Conditions
In corrosive gas or high-temperature, high-humidity
environments, contact failure due to corrosion or
color change or breakage of the housing may occur.
Main parts of the CW series switches are made
of plastic. Do not scratch the surface with a sharp
object or apply excessive electric shock or load,
otherwise the switches may be damaged. In
particular, keep the button, lens and bezel from such
damage, otherwise appearance and function may be
impaired.
Do not apply detergents, cutting oils, or chemicals
which may impair the function and appearance of
the CW series switches.
Panel Mounting
First remove the contact block and then the locking
ring from the operator. Insert the operator into the
panel cut-out from the front, tighten the locking ring
from the back, then install the contact block to the
operator.
Mounting Hole
1. Mounting hole dimensions are in compliance with
IEC60947-5-1.
2. If the anti-rotation projection is removed from
the bezel, CW series switches can be mounted
in ø22.3mm mounting holes. To remove the anti-
rotation projection, remove the gasket and use
cutting pliers to break the projection.
Removing and Installing the Contact Unit
1. To remove the contact block from the operator,
push the yellow locking lever and turn it to the
left.
Locking Lever
2. To install, align the TOP marking on the operator
with the TOP marking on the contact block mount-
ing adaptor, and turn the locking lever to the right.
Installation in Panel Cut-out
Remove the locking ring from the operator. With the
anti-rotation projection on the operator aligned with
the recess in the mounting hole, insert the operator
into the mounting hole. Tighten the locking ring from
the rear of the panel.
TOP marking on selector and key selector
switches
Locking Ring
Panel
TOP marking on illuminated
pushbuttons, pushbuttons and
pilot lights
Anti-rotation projection
Recess in mounting hole
Note for Panel Mounting
When installing the operator in a panel cut-out,
use the optional locking ring wrench (MW9Z-T1) to
tighten the locking ring to a recommended tighten-
ing torque of 1.2 N·m. Do not use pliers and do not
tighten excessively, otherwise the operator may be
damaged.
Illuminated Pushbuttons and Pilot Lights
Removing the Lens
To remove the lens from an illuminated pushbutton
or pilot light, insert a at screwdriver under the
ange of the lens at 90° from the TOP marking and
twist the screwdriver.
Do not insert the screwdriver too far and do not ap-
ply excessive force to the lens, otherwise the bezel
surface may be damaged.
Screwdriver Insertion Direction
TOP Marking
TOP Marking
Screwdriver Insertion Angle
Approx. 30°
Panel Surface
Installing the Lens
Turn the groove in the lens to the TOP marking on
the operator housing. With the groove aligned with
the ridge, press the lens in.
TOP Marking
Groove in the Lens
Ridge
Marking
Marking lm can be applied for inscriptions or
identication.
Applicable Marking Film Size
Illuminated Pushbutton (Round Flush)
Pilot Light (Round Flush, Round Extended)
Illuminated Pushbutton (Round
Extended)
ø15.
9
13.8
12.6
ø15.
9
Thickness: 0.2mm maximum
Film material: Polyester (recommended)
Note: Film is not supplied and must be provided by the user.
Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - CW Series Switches & Pilot Devices
608 www.IDEC.com 1705151132
Operating Instructions, con’t
Pushbuttons
Pushbutton caps cannot be removed. Do not tamper
with the cap using a screwdriver or pliers, otherwise
it may be damaged.
Selector Switches
Turn the selector operator or key to the detent
positions.
Key Selector Switches
To prevent malfunction and damage, take the follow-
ing precautions.
• Completely insert the key before turning.
• Do not remove the key while turning.
• Besides the standard key (0H), six other keys
are available. Use only a key with a number
that matches the number on the switches’ key
cylinder. (The standard key does not have a key
number.)
• Keys are available in two shapes.
-0H (standard), 1H, 2H: reversible keys
-3H, 4H, 5H, 6H: non-reversible keys
Make sure of correct insertion direction.
Contact Blocks and LED Modules
To remove the contact block from the operator, insert
a at screwdriver under the latch and push the
screwdriver down as shown below. Before removing
the LED module, rst remove all contact blocks, and
then remove the LED module in the same manner.
Wiring
Applicable Wires
Stranded wire: 2.0 mm2 maximum (14AWG)
Solid wire: ø1.6 mm maximum
8.0 max.
ø1.6 max.
One or two wires can be connected to the terminal.
Applicable Crimping Terminals
Spade terminal
When using crimping terminals, be sure to use
insulating tubes or insulated crimping terminals.
11.5 max.
8.1 max.
6.9 max.
3.6 min.
0.5 min.
Crimping Terminal
Wire
Insulation Tube
Ferrule
When connecting two ferrules to one terminal, use
ferrules without insulation.
8.0 max.
1.7 max.
Insulation
8.0 max.
1.7 max.
When using spade terminals or ferrules, ensure that
they are inserted completely.
Ring terminals cannot be used.
Screw Tightening Torque
Tighten the M3.5 terminal screws to a recommend-
ed torque of 1.0 to 1.3N·m.