Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices o22 Flush Mount CW Switches & Pilot Devices Flush bezel projects only 2.5mm from front of panel and as little as 39.9mm behind the panel! Key features: * * * * * * * * Mark File No. or Organization UL508 CSA C22.2 No.14 Relays & Sockets Applicable Standards Signaling Lights * * * o22.3mm mounting hole compliant with IEC 60947-5-1 3.5-mm operator travel for pushbuttons ensures comfortable and reliable operation Up to 6 contacts per switch are possible with use of dual contact blocks Black and metallic bezels available Illuminated pushbuttons, pushbuttons, pilot lights, selector switches and key selector switches are available Direct opening NC contact Seven different keys can be chosen for key selector switches 10A contact rating; up to three contact blocks for non-illuminated and two contact blocks for illuminated models can be connected Contact blocks can be removed by locking lever IP20 finger-safe screw terminals UL Type 4X rating UL/c-UL File No. E68961 TUV SUD EN60947-5-1 EC Low Voltage Directive Specifications Contact Ratings Operating Humidity 45 to 85% RH (no condensation) Storage Temperature -40 to +80C Contact Resistance 50 m maximum (initial value) Insulation Resistance 100 M minimum (500V DC megger) Overvoltage Category II (IEC 60664-1) Impulse Withstand Voltage 2.5 kV (IEC60664-1/60947-5-1) Operating extremes: 5 to 55Hz, amplitude 0.5mm Shock Resistance Operating extremes: 100m/s2 Damage limits: 1000m/s2 Mechanical Life (minimum operations) Pushbutton, illuminated pushbutton: 2,000,000 Selector switch: 250,000 Key selector switch: 250,000 Electrical Life (minimum operations) 50,000 (see Contact Ratings) 100,000 (see Contact Ratings) (switching frequency 1800 operations/h) Degree of Protection (IEC60529) Panel front: IP65 Terminals: IP20 Type 4X 250V/10A fuse, (Type aM IEC60269-1, IEC602069-2) Electrical Shock Protection Class II (IEC61140) Terminal Style Screw terminal (M3.5 slotted Phillips screw) Bezel Material Polyamide Applicable Wire Size Up to 2 wires of 2mm2 (solid wire o1.6) maximum (AWG14 to 16) (Ring terminal cannot be used) Recommended Tightening Torque 1705151132 Terminal: 1.0 to 1.3N*m Locking ring: 1.2N*m 10A Rated Operating Voltage (Ue) 24V 120V 240V Resistive Load (AC-12) 10A 10A 6A Inductive Load (AC-15) 10A 6A 3A Resistive Load (DC-12) 8A 2.2A 1.1A Inductive Load (DC-13) 4A 1.1A 0.55A Resistive Load (AC-12) 5A 5A 3A Inductive Load (AC-15) 5A 3A 1.5A Resistive Load (DC-12) 4A 1.1A 0.55A Inductive Load (DC-13) 2A 0.55A 0.27A Electrical Life 50,000 operations AC 50/60Hz DC Rated Operating Current (Ie) Electrical Life 100,000 operations AC 50/60Hz DC Contact Material Silver 1. Minimum applicable load (reference value): 3V AC/DC, 5mA (Applicable range is subject to the operating conditions and load.) 2. The operational current represents the classification by making and breaking currents (IEC 60947-5-1). 3. UL, c-UL rating: A300 Direct Opening of Key Selector Switch 2-position (3NC) 3-position (2NC) Operator Angle for Direct Opening Action 90 45 Minimum Operator Torque for Direct Opening Action 0.2N*m 0.3N*m Maximum Operator Angle 90 45 800-262-IDEC (4332) * USA & Canada Circuit Breakers Short-circuit Protection Rated Thermal Current (Ith) Terminal Blocks 3 (IEC60947-5-1) Vibration Resistance 300V Contactors Pollution Degree Rated Insulation Voltage (Ui) Timers Operating Temperature Non-illuminated: -25 to +60C (no freezing) LED illuminated: -25 to +55C (no freezing) 587 Switches & Pilot Devices Weights Illuminated Pushbutton Pushbutton Pilot Light Selector Switch 27g (CW1P-1EQH) 48g (CW1S-2E03, 3 contacts) 55g (CW1S-2E22, 4 contacts) 61g (CW1K-2AE03, 3 contacts) 68g (CW1K-2AE22, 4 contacts) LED Module Rated Insulation Voltage (Ui) 250V Rated Operating Voltage (Ue) 6V AC/DC 12V AC/DC Operating Voltage Range 6V AC/DC10% 12V AC/DC10% Relays & Sockets Illumination Color Code Timers 24V AC/DC10% 100/120V AC10% 230/240V AC10% CW-EAQ2 CW-EAQ3 CW-EAQ4 CW-EAQH CW-EAQM4 Current Draw 15mA 15mA 16.5mA 18mA 18mA Life (reference value) Approx. 30,000 hours X1 R X1 R LED Chip Internal Circuit R Rectifying Diode Zener Diode R X2 Resistor R C LED Chip Rectifying Diode Zener Diode Resistor Capacitor 1. Specify an illumination color code in place of in the part number. 2. Use the white (PW) LED module for yellow illumination. Contact Blocks Contact Part No. Contactors 230/240V AC LED Module Part Number Contact Block Single Contact Block Double Contact Block 1NO YW-E10R 1NC YW-E01 2NO YW-EW2R0 Blue/Black Black Reddish Purple Red 3-4 1-2 2NC YW-EW02 1NO-1NC YW-EW1R1 Shape Housing Color Push Rod Color Terminal No. Weight (approx.) Terminal Blocks 100/120V AC A (amber), G (green), PW (white), R (red), S (blue) X2 Circuit Breakers 24V AC/DC Blue/Black Black 1st tier: 13-14 2nd tier: 23-24 Reddish Purple Red 1st tier: 11-12 2nd tier: 21-22 19g 11g Degree of Protection Rating IP65 IP66 IP67 UL Type 4X Illuminated Pushbutton Yes Yes * Yes * Yes * Pilot Light Yes Yes No Yes Pushbutton Yes Yes * Yes * Yes * Selector Switch Yes Yes Yes Yes Key Selector Switch Yes Yes No Yes Reddish Purple/Blue Gray 1st tier: (NO) 13-14 2nd tier: (NC) 21-22 Mounting Hole Layout IEC 60947-5-1 compliant 3.2 +0.2 0 R0.8 max. o22 .3 +0.4 0 24.1+0.4 0 Signaling Lights Key Selector Switch 46g (CW1L-M1E02QH, 2 contacts) 62g (CW1L-M1E22QH, 4 contacts) 45g (CW1B-M1E03, 3 contacts) 52g (CW1B-M1E22, 4 contacts) 50 Switches & Pilot Devices o22mm - CW Series *When used with rubber boot (CW9Z-D11, -D12) Note: Determine mounting centers to ensure proper spacing. 30 588 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Illuminated Pushbuttons (Assembled) Style Operating Voltage CW4L-1E10Q4k CW4L-1E01Q4k CW4L-1E11Q4k CW4L-1E20Q4k CW4L-1E02Q4k CW4L-1E22Q4k 100/120V AC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-1E10QHk CW1L-1E01QHk CW1L-1E11QHk CW1L-1E20QHk CW1L-1E02QHk CW1L-1E22QHk CW4L-1E10QHk CW4L-1E01QHk CW4L-1E11QHk CW4L-1E20QHk CW4L-1E02QHk CW4L-1E22QHk 230/240V AC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-1E10QM4k CW1L-1E01QM4k CW1L-1E11QM4k CW1L-1E20QM4k CW1L-1E02QM4k CW4L-1E22QM4k CW4L-1E10QM4k CW4L-1E01QM4k CW4L-1E11QM4k CW4L-1E20QM4k CW4L-1E02QM4k CW4L-1E22QM4k 6V AC/DC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-2E10Q2k CW1L-2E01Q2k CW1L-2E11Q2k CW1L-2E20Q2k CW1L-2E02Q2k CW1L-2E22Q2k CW4L-2E10Q2k CW4L-2E01Q2k CW4L-2E11Q2k CW4L-2E20Q2k CW4L-2E02Q2k CW4L-2E22Q2k 12V AC/DC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-2E10Q3k CW1L-2E01Q3k CW1L-2E11Q3k CW1L-2E20Q3k CW1L-2E02Q3k CW1L-2E22Q3k CW4L-2E10Q3k CW4L-2E01Q3k CW4L-2E11Q3k CW4L-2E20Q3k CW4L-2E02Q3k CW4L-2E22Q3k 24V AC/DC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-2E10Q4k CW1L-2E01Q4k CW1L-2E11Q4k CW1L-2E20Q4k CW1L-2E02Q4k CW1L-2E22Q4k CW4L-2E10Q4k CW4L-2E01Q4k CW4L-2E11Q4k CW4L-2E20Q4k CW4L-2E02Q4k CW4L-2E22Q4k 100/120V AC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-2E10QH CW1L-2E01QHk CW1L-2E11QHk CW1L-2E20QHk CW1L-2E02QHk CW1L-2E22QHk CW4L-2E10QHk CW4L-2E01QHk CW4L-2E11QHk CW4L-2E20QHk CW4L-2E02QHk CW4L-2E22QHk 230/240V AC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC CW1L-2E10QM4k CW1L-2E01QM4k CW1L-2E11QM4k CW1L-2E20QM4k CW1L-2E02QM4k CW1L-2E22QM4k CW4L-2E10QM4k CW4L-2E01QM4k CW4L-2E11QM4k CW4L-2E20QM4k CW4L-2E02QM4k CW4L-2E22QM4k (metallic bezel) 800-262-IDEC (4332) * USA & Canada A: G: PW: R: S: Y: amber green white red blue yellow A: G: PW: R: S: Y: amber green white red blue yellow 1. Specify an illumination color code in place of in the Part Number. 2. Specify function code in place of in the Part Number. M: momentary, A: maintained 3. See page 603 for dimensions. 4. See next page for replacement LED modules. 5. A dummy block is installed when one contact block is used. 6. Additional contact configurations Circuit Breakers CW1L-1E10Q4k CW1L-1E01Q4k CW1L-1E11Q4k CW1L-1E20Q4k CW1L-1E02Q4k CW1L-1E22Q4k Terminal Blocks 24V AC/DC 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC Contactors CW4L-1E10Q3k CW4L-1E01Q3k CW4L-1E11Q3k CW4L-1E20Q3k CW4L-1E02Q3k Timers CW1L-1E10Q3k CW1L-1E01Q3k CW1L-1E11Q3k CW1L-1E20Q3k CW1L-1E02Q3k Relays & Sockets 12V AC/DC 1NO 1NC 1NO-1NC 2NO 2NC 2NO-2NC Illumination Color Code k Signaling Lights 6V AC/DC CW4L-1E10Q2k CW4L-1E01Q2k CW4L-1E11Q2k CW4L-1E20Q2k CW4L-1E02Q3k CW4L-1E22Q2k (metallic bezel) 1705151132 Metallic Bezel CW1L-1E10Q2k CW1L-1E01Q2k CW1L-1E11Q2k CW1L-1E20Q2k CW1L-1E02Q2k CW1L-1E22Q2k (black bezel) (black bezel) Black Bezel 1NO 1NC 1NO-1NC 2NO 2NC 2N0-2NC Round Flush CW0L-01 Round Extended CW0L-02 Contact Configuration available, contact IDEC for more details 589 Switches & Pilot Devices Signaling Lights Switches & Pilot Devices o22mm - CW Series Illuminated Pushbuttons (Sub-assembled) Contact Blocks + LED Module + Mounting Adapter Contact Blocks Style Contact Contact Part Block Configuration Number 1NO YW-E10R Relays & Sockets Fingersafe screw terminal Double 1NC YW-E01 2NO YWEW2R0 2NC 1N0-1NC Dummy block LED Module Timers + Style Round Flush Single Part Number CW-EAQ 1. In place of , specify the Lens/LED Color Code from table. 2. In place of , specify the Voltage Code from table. 3. Use PW LED for yellow lens. Contactors Operator Lens = Operators Contacts Style + Metallic Bezel CW1L-M10 CW4L-M10 Momentary Round Extended Round Flush YW-EW02 CW1L-M20 CW1L-A10 CW4L-M20 CW4L-A10 Maintained YWEW1R1 CW-DB Black Bezel Round Extended CW1L-A20 CW4L-A20 Completed Unit j Lens/LED Color Code Color Code Amber A Green G Red R Blue S White* PW or C Yellow Y *Use PW for LED module, use C for lens. k Voltage Code Lens Style Part Number Round Flush Round Extended CW9Z-L11j Voltage Code 6V AC/DC 2 12V AC/DC 3 24V AC/DC 4 100/120V AC H 230/240V AC M4 CW9Z-L12j 1. In place of , specify the Lens/LED Color Code from table. Contact Block Mounting Adaptor Terminal Blocks Style Part Number Circuit Breakers CW-CN 590 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Non-Illuminated Pushbuttons (Assembled) Style Round Flush CW0B-01 Round Extended CW0B-02 Metallic Bezel 1NO CW1B-1E10j CW4B-1E10j 1NC CW1B-1E01j CW4B-1E01j 1NO-1NC CW1B-1E11j CW4B-1E11j 2NO CW1B-1E20j CW4B-1E20j 2NC CW1B-1E02j CW4B-1E02j 2NO-1NC* CW1B-M1E21j CW4B-M1E21j 1NO-2NC* CW1B-M1E12j CW4B-M1E12j 3NO* CW1B-M1E30j CW4B-M1E30j 3NC* CW1B-M1E03j CW4B-M1E03j 2NO-2NC CW1B-1E22j CW4B-1E22j 1NO CW1B-2E10j CW4B-2E10j 1NC CW1B-2E01j CW4B-2E01j 1NO-1NC CW1B-2E11j CW4B-2E11j 2NO CW1B-2E20j CW4B-2E20j 2NC CW1B-2E02j CW4B-2E02j 2NO-1NC* CW1B-M2E21j CW4B-M2E21j 1NO-2NC* CW1B-M2E12j CW4B-M2E12j 3NO* CW1B-M2E30j CW4B-M2E30j 3NC* CW1B-M2E03j CW4B-M2E03j 2NO-2NC CW1B-M2E22j CW4B-2E22j Button Color Code B: G: R: S: W: Y: black green red blue white yellow 1. Specify a button color code in place of in the part number. 2. Specify function code in place of in the Part Number. M: momentary, A: maintained 3. See page 604 for dimensions. 4. Two dummy blocks are installed when one contact is used and one dummy block in installed when two contact blocks are used. 5. *These contact configurations are not available in maintained action 6. Additional contact configurations available; contact IDEC for more details. Timers Non-Illuminated Pushbuttons (Sub-assembled) Contact Blocks Style Contacts Mounting Adaptor Contact Contact Part Block Configuration Number YW-E10R 1NC YW-E01 Single Fingersafe screw terminal 2NO Double 2NC 1N0-1NC Dummy block Operator = Completed Unit Operators* j Button Color Code Style Black Bezel Round Flush CW1B-M1 Metallic Bezel CW4B-M1 Momentary YWEW2R0 YW-EW02 CW1B-M2 CW4B-M2 Round Flush CW1B-A1 CW4B-A1 Round Extended CW1B-A2 CW4B-A2 Maintained YWEW1R1 CW-DB Round Extended 1. Specify a button color code in place of . 2. *Operator button is not removable from operator. Color Code Black B Green G Red R Blue S White W Yellow Y Terminal Blocks 1NO + Contact Block Mounting Adaptor Part Number Circuit Breakers Style CW-CN 1705151132 800-262-IDEC (4332) * USA & Canada Contactors Contact Blocks + Relays & Sockets (metallic bezel) Black Bezel Signaling Lights (black bezel) Contact Configuration 591 Switches & Pilot Devices Relays & Sockets Signaling Lights Switches & Pilot Devices o22mm - CW Series Pilot Lights (Assembled) Style Operating Voltage Black Bezel Metallic Bezel Round Flush Lens CW0P-1 6V AC/DC CW1P-1EQ2k CW4P-1EQ2k 12V AC/DC CW1P-1EQ3k CW4P-1EQ3k 24V AC/DC CW1P-1EQ4k CW4P-1EQ4k 100/120V AC CW1P-1EQHk CW4P-1EQHk (black bezel) 230/240V AC CW1P-1EQM4k CW4P-1EQM4k Round Dome Lens CW0P-2 6V AC/DC CW1P-2EQ2k CW4P-2EQ2k 12V AC/DC CW1P-2EQ3k CW4P-2EQ3k 24V AC/DC CW1P-2EQ4k CW4P-2EQ4k 100/120V AC CW1P-2EQHk CW4P-2EQHk 230/240V AC CW1P-2EQM4k CW4P-2EQM4k (metallic bezel) Illumination Color Code k A: G: R: S: PW: Y: amber green red blue white yellow 1. Specify an illumination color code in place of in the Part Number 2. See page 604 for dimensions. 3. See page 602 for replacement LED modules. 4. Two dummy blocks are installed. Pilot Lights (Sub-assembled) + LED Module + Mounting Adapter + Operator + Lens = Completed Unit Timers Contact Blocks* * 2 dummy blocks are required for each completed pilot light. Contactors Contact Block Style Contact Block Mounting Adaptor Contacts Dummy Block Part Number Style Part Number Lens Style Part Number CW-DB CW-CN LED Module Style Part Number Terminal Blocks Black Bezel CW1P-00 Metallic Bezel CW4P-00 Circuit Breakers 1. In place of , specify the Lens/LED Color Code from table. 2. In place of , specify the Voltage Code from table. 3. Use PW LED for yellow lens. Style CW9Z-L11j Round Dome CW9Z-L15j 1. In place of , specify the Lens/LED Color Code from table. Operators CW-EAQ Round Flush j Lens/LED Color Code k Voltage Code Voltage Code Color Code 6V AC/DC 2 Amber A 12V AC/DC 3 Green G 24V AC/DC 4 Red R 100/120V AC H Blue S 230/240V AC M4 White* PW or C Yellow Y *Use PW for LED module, use C for lens. 592 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Selector Switches (Assembled) CW0S (Knob Operator) Shape (black bezel) No. of Positions Contact Configuration 1NC (01) 2NO (20) 90 2-position 2NC (02) 1NO-2NC (12) 3NC (03) CW0S-21E10 NO 2 -- Dummy 3 -- Dummy 1 -- Dummy 2 -- Dummy CW0S-2E01 CW0S-21E01 Dummy CW0S-2E11 CW0S-21E11 Dummy CW0S-2E20 CW0S-21E20 Dummy CW0S-2E02 CW0S-21E02 CW0S-2E21 CW0S-21E21 CW0S-2E12 CW0S-21E12 CW0S-2E30 CW0S-21E30 CW0S-2E03 CW0S-21E03 CW0S-2E22 CW0S-21E22 CW0S-2E40 CW0S-2E40 3 NC 1 NO 2 -- 3 NC 1 NO 2 -- 3 NO 1 NC 2 -- 3 NC 1 NO 2 NO 3 NC 1 NO 2 NC 3 NC 1 NO 2 NO 3 NO 1 NC 2 NC 3 NC NC NO/ NC NC 2 -- 3 NO/ NO NC NC 1 2NO 2 NO NO -- 2NO Dummy Dummy Circuit Breakers 3 1705151132 CW0S-2E10 1 R Terminal Blocks 4NO (40) Spring return from right Type 1 2NO-2NC (22) Maintained Mounting Position Contactors 3NO (30) L R Timers 2NO-1NC (21) R L Relays & Sockets 1NO-1NC (11) L Operator Position Signaling Lights 1NO (10) Contact Block (metallic bezel) NO NO 800-262-IDEC (4332) * USA & Canada 593 Switches & Pilot Devices Switches & Pilot Devices o22mm - CW Series Selector Switches (Assembled) con't No. of Positions Contact Configuration Signaling Lights 1NO-1NC (11) 1NO-1NC (11N1) 1NO-1NC (11N2) Relays & Sockets 1NO-1NC (11N3) 1NO-1NC (11N4) 2NO (20) Timers 2NO (20N1) 45 3-position 2NC (02) 2NC (02N1) Contactors 2NO-1NC (21) 2NO-1NC (21N1) Terminal Blocks 1NO-2NC (12) 1NO-2NC (12N1) 3NO (30) Circuit Breakers 3NC (03) 594 Operator Position Contact Block Mounting Position Type 1 NO 2 3 1 2 -- NC NC -- 3 NO 1 NO 2 NC 3 1 -- -- 2 NC 3 NO 1 -- 2 NO 3 NC 1 NO 2 -- 3 NO 1 -- 2 NO 3 NO 1 2 3 1 NC -- NC -- 2 NC 3 NC 1 NO 2 NO 3 NC 1 NO 2 NC 3 NO 1 NO 2 NC 3 1 NC NC 2 NO 3 NC 1 NO 2 NO 3 NO 1 NC 2 NC 3 NC L L C L R C R L C R L C R Maintained Spring return from right Spring return from left Spring return two-way Dummy CW0S-3E11 CW0S-31E11 CW0S-32E11 CW0S-33E11 Dummy CW0S-3E11N1 CW0S-31E11N1 CW0S-32E11N1 CW0S-33E11N1 CW0S-3E11N2 CW0S-31E11N2 CW0S-32E11N2 CW0S-33E11N2 CW0S-3E11N3 CW0S-31E11N3 CW0S-32E11N3 CW0S-33E11N3 CW0S-3E11N4 CW0S-31E11N4 CW0S-32E11N4 CW0S-33E11N4 CW0S-3E20 CW0S-31E20 CW0S-32E20 CW0S-33E20 CW0S-3E20N1 CW0S-31E20N1 CW0S-32E20N1 CW0S-33E20N1 CW0S-3E02 CW0S-31E02 CW0S-32E02 CW0S-33E02 CW0S-3E02N1 CW0S-31E02N1 CW0S-32E02N1 CW0S-33E02N1 CW0S-3E21 CW0S-31E21 CW0S-32E21 CW0S-33E21 CW0S-3E21N1 CW0S-31E21N1 CW0S-32E21N1 CW0S-33E21N1 CW0S-3E12 CW0S-31E12 CW0S-32E12 CW0S-33E12 CW0S-3E12N1 CW0S-31E12N1 CW0S-32E12N1 CW0S-33E12N1 CW0S-3E30 CW0S-31E30 CW0S-32E30 CW0S-33E30 CW0S-3E03 CW0S-31E03 CW0S-32E03 CW0S-33E03 C R Dummy Dummy Dummy Dummy Dummy Dummy Dummy www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Selector Switches (Assembled) con't Operator Position Contact Block No. of Positions Contact Configuration Mounting Position 1 2NO-2NC (22) 4NO (40) 2 2NO 1 2NC 2 R L C R L C R Maintained Spring return from right Spring return from left Spring return two-way Dummy CW0S-3E22 CW0S-31E22 CW0S-32E22 CW0S-33E22 Dummy CW0S-3E40 CW0S-31E40 CW0S-32E40 CW0S-33E40 Dummy CW0S-3E22N2 CW0S-31E22N2 CW0S-32E22N2 CW0S-33E22N2 NO NO NC NC -- 2NO C NC NO 2NO NO -- 3 3 1. 2. 3. 4. NO/ NC NO R L R Relays & Sockets 2NO-2NC (22N2) NO NC -- C C Signaling Lights 1 L NO/ NC 2 3 45 3-position Type L NC NC Specify a bezel color code in place of 0 in the Part Number, 1 (black bezel), 4 (metallic bezel) For the contact block mounting position, see below. Lever operator is also available. For dimensions, see page 605. To order a lever operator selector switch, insert L before E in the knob operator part number. Example: Knob Operator part number CW1S-3E11 becomes CW1S-3LE11 for Lever Operator. Lever Operator Contact Block Mounting Position Left Center L CW1S-0L (black bezel) CW4S-0L (metallic bezel) 1 NO 2 NC 3 NC C Timers 1 2 3 Right R Operator Position Contactors Terminal Blocks Circuit Breakers 1705151132 800-262-IDEC (4332) * USA & Canada 595 Switches & Pilot Devices Signaling Lights Switches & Pilot Devices o22mm - CW Series Selector Switches (Sub-assembled) Contact Block + Mounting Adaptor + Operator = Completed Unit Contact Blocks Style Contacts Contact Contact Part Block Configuration Number 1NO YW-E10R 1NC YW-E01 2NO YWEW2R0 2NC YW-EW02 Single Relays & Sockets Fingersafe screw terminal Double 1N0-1NC Dummy block YWEW1R1 CW-DB Timers Contact Block Mounting Adaptor Style Part Number Contactors CW-CN Operators Style Position Handle Knob Terminal Blocks 2-position Knob 3-position (knob operator shown) Circuit Breakers Lever Lever Description Black Bezel Metallic Bezel Maintained CW1S-2 CW4S-2 Spring return from right CW1S-21 CW4S-21 Maintained CW1S-2L CW4S-2L Spring return from right CW1S-21L CW4S-21L Maintained CW1S-3 CW4S-3 Spring return from right CW1S-31 CW4S-31 Spring return from left CW1S-32 CW4S-32 Spring return two-way CW1S-33 CW4S-33 Maintained CW1S-3L CW4S-3L Spring return from right CW1S-31L CW4S-31L Spring return from left CW1S-32L CW4S-32L Spring return two-way CW1S-33L CW4S-33L Lever or knob is supplied with operator. 596 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Key Selector Switches (Assembled) CW0K Shape (black bezel) Contact Block 1NO (10) 1NC (01) 2NO (20) 2NC (02) 90 2-position 1NO-2NC (12) 3NO (30) 2NO-2NC (22) 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 NO -- -- -- -- NC NO -- NC NO -- NO NC -- NC NO NO NC NO NC NC NO NO NO NC NC NC 1 NO/NC 2 1 4NO (40) 3 Spring return from right Dummy Dummy Dummy Dummy CW0K-2AE10 CW0K-21BE10 CW0K-2AE01 CW0K-21BE01 Dummy CW0K-2AE11 CW0K-21BE11 Dummy CW0K-2AE20 CW0K-21BE20 Dummy CW0K-2AE02 CW0K-21BE02 CW0K-2AE21 CW0K-21BE21 CW0K-2AE12 CW0K-21BE12 CW0K-2AE30 CW0K-21BE30 CW0K-2AE03 CW0K-21BE03 Dummy CW0K-2AE22 CW0K-21BE22 Dummy CW0K-2AE40 CW0K-21BE40 NC NO NO/NC NC NO 2NO NO -- 2NO Maintained NO -- 2 R R Terminal Blocks 3 L L Contactors 3NC (03) Type R Timers 2NO-1NC (21) L Mounting Position Relays & Sockets 1NO-1NC (11) Operator Position Signaling Lights No. of Positions Contact Configuration (metallic bezel) NO NO Circuit Breakers 1705151132 800-262-IDEC (4332) * USA & Canada 597 Switches & Pilot Devices Key Selector Switches (Assembled) con't No. of Positions Contact Configuration 1NO-1NC (11) 1NO-1NC (11N1) Signaling Lights Switches & Pilot Devices o22mm - CW Series 1NO-1NC (11N2) Relays & Sockets 1NO-1NC (11N3) 1NO-1NC (11N4) 2NO (20) Timers 2NO (20N1) 45 3-position 2NC (02) 2NC (02N1) Contactors 2NO-1NC (21) 2NO-1NC (21N1) 1NO-2NC (12) Terminal Blocks 1NO-2NC (12N1) 3NO (30) Mounting Position Type 1 2 3 1 2 3 NO -- NC NC -- NO 1 NO 2 3 1 2 NC -- -- NC 3 1 2 3 1 2 3 1 2 NO -- NO NC NO -- NO -- NO 3 1 2 3 1 2 3 1 NO NC -- NC -- NC NC NO 2 3 1 L C R L C R L C R L C R Maintained Spring return from right Spring return from left Spring return two-way Dummy CW0K-3AE11 CW0K-31BE11 CW0K-32CE11 CW0K-33DE11 Dummy CW0K-3AE11N1 CW0K-31BE11N1 CW0K-32CE11N1 CW0K-33DE11N1 CW0K-3AE11N2 CW0K-31BE11N2 CW0K-32CE11N2 CW0K-33DE11N2 CW0K-3AE11N3 CW0K-31BE11N3 CW0K-32CE11N3 CW0K-33DE11N3 CW0K-3AE11N4 CW0K-31BE11N4 CW0K-32CE11N4 CW0K-33DE11N4 CW0K-3AE20 CW0K-31BE20 CW0K-32CE20 CW0K-33DE20 CW0K-3AE20N1 CW0K-31BE20N1 CW0K-32CE20N1 CW0K-33DE20N1 CW0K-3AE02 CW0K-31BE02 CW0K-32CE02 CW0K-33DE02 CW0K-3AE02N1 CW0K-31BE02N1 CW0K-32CE02N1 CW0K-33DE02N1 NO NC NO CW0K-3AE21 CW0K-31BE21 CW0K-32CE21 CW0K-33DE21 2 NC CW0K-3AE21N1 CW0K-31BE21N1 CW0K-32CE21N1 CW0K-33DE21N1 3 NO 1 NO 2 3 1 2 3 1 NC NC NC NO NC NO CW0K-3AE12 CW0K-31BE12 CW0K-32CE12 CW0K-33DE12 CW0K-3AE12N1 CW0K-31BE12N1 CW0K-32CE12N1 CW0K-33DE12N1 2 NO CW0K-3AE30 CW0K-31BE30 CW0K-32CE30 CW0K-33DE30 3 1 2 3 NO NC NC NC CW0K-3AE03 CW0K-31BE03 CW0K-32CE03 CW0K-33DE03 L C R Dummy Dummy Dummy Dummy Dummy Dummy Dummy Circuit Breakers 3NC (03) Operator Position Contact Block 598 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Key Selector Switches (Assembled) con't Operator Position Contact Block No. of Positions Contact Configuration Mounting Position 1 2NO-2NC (22) 2NO 2 2NO 1 2NC 2 3 C L R L C R Maintained Spring return from right Spring return from left Spring return two-way Dummy CW0K-3AE22 CW0K-31BE22 CW0K-32CE22 CW0K-33DE22 Dummy CW0K-3AE40 CW0K-31BE40 CW0K-32CE40 CW0K-33DE40 Dummy CW0K-3AE22N2 CW0K-31BE22N2 CW0K-32CE22N2 CW0K-33DE22N2 C R NC NO NO NO NC NC NC NC Key removal position code 2-position A: Removable in all positions B: Removable in left only C: Removable in right only Left Center L 1 NO 2 NC 3 NC C Right R Operator Position Note: Key number is indicated on the key cylinder. Standard keys do not have a key number indication. Contactors Standard key (0H, reversible) Reversible key Non-reversible key Contact Block Mounting Position 1 2 3 Timers 1. Specify a bezel color code in place of 0 in the Part Number: 1 (black bezel), 4 (metallic bezel). 2. On the spring-returned models, the key can be released only from the maintained position. On the maintained models, the key can be released from any position. Key retained positions are also available. See below. 3. Two keys are supplied. 4. Key cylinder material: Metal 5. Besides the standard key (key number 0H), six other keys are also available. See below. 6. For the contact block mounting position, see right. 7. For dimensions, see page 606. 8. When ordering an optional key or optional key-retained positions, specify designation codes as shown below: Example: CW1K-2AE10-1H blank: 1H to 2H: 3H to 6H: R NO -- 2NC C NO -- 3 L NO NC -- NO/NC R Relays & Sockets 2NO-2NC (22N2) L C Signaling Lights 1 90 2-position NO/NC 2 3 4NO (40) Type L 3-position A: Removable in all positions B: Removable in left and center C: Removable in right and center D: Removable in center only E: Removable in right and left G: Removable in left only H: Removable in right only Terminal Blocks Note: Key is retained in all spring-returned positions. Circuit Breakers 1705151132 800-262-IDEC (4332) * USA & Canada 599 Switches & Pilot Devices Signaling Lights Switches & Pilot Devices o22mm - CW Series Key Selector Switches (Sub-assembled) Contact Block + Mounting Adaptor + Contact Blocks Style Contacts Operator Relays & Sockets Completed Unit Contact Block Mounting Adaptor Contact Contact Part Block Configuration Number 1NO YW-E10R 1NC YW-E01 2NO YWEW2R0 2NC YW-EW02 Style Single Fingersafe screw terminal = Double 1N0-1NC Dummy block Part Number CW-CN YWEW1R1 CW-DB Timers Operator Style Position Contactors 2-position Terminal Blocks 3-position Description Black Bezel Metallic Bezel Maintained, key removable all positions CW1K-2A CW4K-2A Maintained, key removable left position only CW1K-2B CW4K-2B Maintained, key removable right position only CW1K-2C CW4K-2C Spring return from right CW1K-21B CW4K-21B Maintained, key removable all positions CW1K-3A CW1K-3A Maintained, key removable left and center positions only CW1K-3B CW4K-3B Maintained, key removable right and center positions only CW1K-3C CW4K-3C Maintained, key removable center position only CW1K-3D CW4K-3D Maintained, key removable left and right positions only CW1K-3E CW4K-3E Maintained, key removable left position only CW1K-3G CW4K-3G Maintained, key removable right position only CW1K-3H CW4K-3H Spring return from right, key removable left and center positions only CW1K-31B CW4K-31B Spring return from right, key removable center position only CW1K-31D CW4K-31D Spring return from right, key removable left position only CW1K-31G CW4K-31G Spring return from left, key removable right and center positions only CW1K-32C CW4K-32C Spring return from left, key removable center position only CW1K-32D CW4K-32D Spring return from left, key removable right position only CW1K-32H CW4K-32H Spring return two-way, key removable center position only CW1K-33D CW4K-33D Circuit Breakers Two keys supplied with operator. 600 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Accessories Item Appearance Material Part Number Remarks Locking Ring Wrench Brass MW9Z-T1 * Used to tighten the locking ring when installing the CW series control unit in a panel cut-out * Weight: Approx 150g Mounting Hole Plug Polyamide (black) LW9Z-BP1 * Used to plug an unnecessary o22.3mm hole in the panel * Degree of protection: IP65 * Panel thickness: 0.8 to 6.0mm 110 8 o2 Signaling Lights Replacement Parts Part Number Lens 1 2 3 1 Round Flush Polyalylate CW9Z-L11k 2 Round Extended Polyalylate CW9Z-L12k 3 Round Dome Polyalylate CW9Z-L15k 1NO YW-E10R 1NC YW-E01 Single Contact Block Push rod Housing Double Contact Block Housing YW-EW2R0 2NC YW-EW02 1NO, 1NC YW-EW1R1 Rubber Round Boot Flush (clear) Push rod color: Black Housing color: Blue/black Terminal No.: 3-4 Push rod color: Red Housing color: Reddish purple Terminal No.: 1-2 Push rod color: black Housing color: blue and black Terminal No. 1st tier: 13-14, 2nd tier: 23-24 Push rod color: red Housing color: reddish purple Terminal No. 1st tier: 11-12, 2nd tier: 21-22 Push rod color: gray Housing color: reddish purple/blue Terminal No. 1st tier: 13-14, 2nd tier: 21-22 CW9Z-D11 CW9Z-D12 Round Extended Locking Ring CW-DB Polyamide (black) CW9Z-LN Nitrile rubber CW9Z-WM Plastic CWAM-OB Terminal Blocks Polyamide (black) Contactors Dummy Block Color code k: A (amber), C (clear), G (green), R (red), S (blue), Y (yellow) Use a clear (C) lens for white (PW) illumination. 1: For illuminated pushbutton, pilot light 2: For illuminated pushbutton 3: For pilot light Timers Push rod 2NO Remarks Relays & Sockets Material Shape Gasket Waterproof gasket between CW control unit bezel and the mounting panel. Nameplate Non-reversible Reversible 1705151132 Zinc (nickel-plated) LA9Z-SK-0 Specify a key No. in place of 0. 0H: Standard key (reversible) 1H to 2H: Reversible key 3H to 6H: Non-reversible key For dimensions, see page 606. 800-262-IDEC (4332) * USA & Canada Circuit Breakers Spare Key 601 Switches & Pilot Devices LED Modules Shape Operating Voltage Range Current Draw Part Number Illumination Color Code k 6V AC/DC10% 15mA CW-EAQ2k 12V AC/DC10% 15mA CW-EAQ3k 24V AC/DC10% 16.5mA CW-EAQ4k 100/120V AC10% 18mA CW-EAQHk 230/240V AC10% 18mA CW-EAQM4k Specify an illumination color code in place of k in the Part Number A: amber G: green PW: white R: red S: blue Nameplate Standard Legend Codes Pushbuttons CWAM-Black Plastic 29 27 2.7 Relays & Sockets .2 o22 14 30 12.1 Signaling Lights Switches & Pilot Devices o22mm - CW Series 0.7 Nameplate (blank engraving CWAM-OB plate included) Additional Insert (blank) HWNP-O Additional Insert (engraved) HWNP-j Code AUTO CLOSE DOWN EMERG. STOP FAST FORWARD HAND HIGH IN INCH JOG LOW LOWER OFF ON 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 HWNP Dimensions Pushbuttons/Selector Switches Legend Code Legend OPEN OUT RAISE RESET REVERSE RUN SLOW START STOP TEST UP I (Int'l On) O (Int'l Off) EMO AUTO-MAN CLOSE-OPEN DOWN-UP FAST-SLOW FOR-REV HAND-AUTO HIGH-LOW JOG-RUN LEFT-RIGHT LOWERRAISE MAN-AUTO OFF-ON ON-OFF OPEN-CLOSE RAISELOWER 116 117 118 119 120 121 122 123 125 126 127 150 151 152 Code 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 Legend Selector Switches Code Legend REV-FOR RUN-JOG RUN-SAFE SAFE-RUN SLOW-FAST START-STOP STOP-START UP-DOWN OI (Int'l OFF ON) 216 217 218 219 220 221 222 223 250 AUTO-MAN-OFF AUTO-OFF-MAN CLOSE-OFF-OPEN DOWN-OFF-SLOW FAST-OFF-SLOW FOR-OFF-REV LEFT-OFF-RIGHT LOWER-OFF-RAISE OFF-MAN-AUTO OFF-SLOW-FAST OFF-1-2 OPEN-OFF-CLOSE SLOW-OFF-FAST SUMMER-OFFWINTER UP-OFF-DOWN 1-OFF-2 HAND-OFF-AUTO Code 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 1. To order engraved nameplates, add legend code to nameplate part number. 2. Character height based on the number of characters and size of nameplate. Standard character size is 3/16". 3. Nameplates with standard legends are the same list price as blank nameplates. 27 12 Timers Nameplate CWAM-j (engraved) Legend 1. In place of j, insert either the standard legend code from table below or custom engraving delimited by " ". 2. Standard engravings are available at no charge. To ensure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: IDEC Rep/Distributor Contact: Name: PO number (if known): Telephone: IDEC Rep/Distributor Phone: Fax & Email: IDEC Rep/Distributor Fax & Email: CWAM Nameplate Engraving Location Circuit Breakers Terminal Blocks Contactors Nameplates Order Form -- CW Series Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired. Step 1. Choose Letter Size - 7/64" or 1/8". Check the box for the letter size you want. Then write your lettering in box below the check boxes. Note: 1/8" size letters cannot exceed 9 characters. Step 2. Specify Quantity. Enter the number of nameplates desired in the box on the right. 602 7/64" Letter Size 11 characters maximum (for 7/64" size letters) 1/8" Letter Size 9 characters maximum (for 7/8" size letters) Sample Letter Sizes Qty 1 2 3 4 5 6 www.IDEC.com 7 8 9 10 11 7/64" Letters: ABCD 1/8" Letters: A BCD 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Dimensions (mm) Illuminated Pushbuttons 1 to 3 Contacts Round Flush Round Extended LO 28.5 CK o28 o19.5 41.4 (Lens Diameter) 28.5 o28 o19.5 (Lens Diameter) 10 10 10 K Relays & Sockets 41.4 LOC Signaling Lights 1 Gasket Panel Thickness 0.8 to 3.2 M3.5 0.5 Terminal Screw LED Module Locking Ring Gasket 0.5 Locking Ring 2 M3.5 Terminal Screw LED Module 3 10 Panel Thickness 0.8 to 3.2 10 M3.5 Terminal Screw Contact Block 10 M3.5 Terminal Screw Contact Block 2.5 Momentary: 39.9 Maintained: 44.6 2.5 Momentary: 39.9 Maintained: 44.6 30 30 5.2 4 to 6 Contacts Round Flush Round Extended M3.5 Terminal Screw Contact Block M3.5 Terminal Screw Contact Block Panel Thickness 0.8 to 3.2 10 10 10 2nd-tier 1st-tier contact block (NC) contact block (NO) 0.5 CK 28.5 o28 o19.5 (Lens Diameter) 28.5 CK o28 (Lens Diameter) 41.4 o19.5 2.5 LO LO Contactors Momentary: 59.9 Maintained: 64.6 0.5 Locking Ring Gasket Locking Ring Gasket 41.4 2nd-tier 1st-tier contact block (NC) contact block (NO) Timers 10 10 10 Panel Thickness 0.8 to 3.2 2.5 30 Momentary: 59.9 Maintained: 64.6 5.2 30 Terminal Blocks Circuit Breakers 1705151132 800-262-IDEC (4332) * USA & Canada 603 Switches & Pilot Devices Pushbuttons 1 to 3 Contacts Round Flush Round Extended M3.5 Terminal Screw Contact Block M3.5 Terminal Screw Contact Block Panel Thickness 0.8 to 3.2 LO Momentary o19.5 41.4 Maintained LO Locking Ring Gasket LO CK 28.5 CK 28.5 CK 28.5 28.5 CK o28 o19.5 (Button Diameter) 41.4 0.5 Maintained LO o28 Momentary Locking Ring Gasket (Button Diameter) 0.5 Signaling Lights Panel Thickness 0.8 to 3.2 10 10 10 10 10 10 Switches & Pilot Devices o22mm - CW Series 2.5 2.5 30 30 30 4 to 6 Contacts Round Extended M3.5 Terminal Screw Contact Block M3.5 Terminal Screw Contact Block Panel Thickness 0.8 to 3.2 10 10 10 Panel Thickness 0.8 to 3.2 o19.5 41.4 30 Momentary: 59.9 Maintained: 64.6 30 Maintained LO LO CK CK 28.5 28.5 CK 28.5 28.5 2.5 Momentary Locking Ring Gasket LO CK 0.5 o28 Maintained LO o28 o19.5 41.4 (Button Diameter) Timers 2nd-tier 1st-tier contact block (NC) contact block (NO) (Button Diameter) Momentary Locking Ring Gasket Momentary: 59.9 Maintained: 64.6 2.5 5.2 30 30 Pilot Lights Round Flush Round Dome Panel Thickness 0.8 to 3.2 10 0.5 28.5 K o28 o19.5 41.4 LOC Gasket (Lens Diameter) Locking Ring 28.5 K o28 o19.5 (Lens Diameter) 10 10 10 41.4 1 1 LOC Gasket 2 2 M3.5 Terminal Screw LED Module 0.5 Locking Ring 3 3 M3.5 Terminal Screw LED Module 10 Panel Thickness 0.8 to 3.2 10 Contactors 5.2 Momentary: 39.9 Maintained: 44.6 Round Flush 0.5 2nd-tier 1st-tier contact block (NC) contact block (NO) Terminal Blocks 30 10 10 10 Relays & Sockets Momentary: 39.9 Maintained: 44.6 Circuit Breakers 2.5 39.9 604 2.5 39.9 30 www.IDEC.com 4.1 30 1705151132 Switches & Pilot Devices o22mm - CW Series Switches & Pilot Devices Selector Switches 1 to 3 Contacts Knob Operator Lever Operator M3.5 Terminal Screw Contact Block 10 10 10 10 1 1 2 2 3 3 10 Panel Thickness 0.8 to 3.2 10 Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Contact Block Operator Angle Operator Angle 45 LOC K Locking Ring 45 Gasket K o28 41.4 o28 41.4 45 LOC Relays & Sockets 2.5 2.5 39.9 45 28.5 Gasket 28.5 Locking Ring Signaling Lights 0.5 0.5 13.1 39.9 30 17.1 30 4 to 6 Contacts Knob Operator Lever Operator M3.5 Terminal Screw Contact Block M3.5 Terminal Screw Contact Block Panel Thickness 0.8 to 3.2 10 10 10 Timers 10 10 10 Panel Thickness 0.8 to 3.2 2nd-tier 1st-tier contact block (NC) contact block (NO) 0.5 2nd-tier 1st-tier contact block (NC) contact block (NO) 0.5 Operator Angle Operator Angle LOC K 45 45 o28 41.4 28.5 o28 41.4 K Contactors 59.9 LOC 2.5 2.5 13.1 45 Locking Ring Gasket 28.5 45 Locking Ring Gasket 30 59.9 17.1 30 Terminal Blocks Circuit Breakers 1705151132 800-262-IDEC (4332) * USA & Canada 605 Switches & Pilot Devices Key Selector Switches 1 to 3 Contacts Keys Reversible Key Panel Thickness 0.8 to 3.2 Operator Angle 0.5 45 LOC K 45 Key No. o28 41.4 Key No. Stamping Key No. Stamping Non-reversible Key 2.5 10.4 8.8 8.8 30 31.5 39.9 Relays & Sockets Logo Stamping Logo Stamping Key No. 28.5 Gasket 0 H0 H Signaling Lights Locking Ring 22 22 14 14 1 8.8 8.8 4.84.8 10 10 2 10 M3.5 Terminal Screw Contact Block 3 22 22 1.5 6.36.3 Key No.: 0H to 2H (reversible key) 14 14 Switches & Pilot Devices o22mm - CW Series Logo Stamping Logo Stamping Key No. Key No. 3 H3 H 31.5 Key No. Stamping Key No. Stamping 4 to 6 Contacts M3.5 Terminal Screw Contact Block Panel Thickness 0.8 to 3.2 2nd-tier 1st-tier contact block (NC) contact block (NO) 0.5 Operator Angle 45 Locking Ring Gasket LOC K 45 Terminal Blocks o28 41.4 28.5 Contactors 10 10 10 Timers Key No.: 3H to 6H (non-reversible key) 2.5 10.4 31.5 30 Circuit Breakers 59.9 606 www.IDEC.com 1705151132 Switches & Pilot Devices o22mm - CW Series Turn off the power to CW series switches before installation, removal, wiring and maintenance. Failure to turn power off may cause electrical shocks or fire hazard. When wiring, use wires of a proper size to meet the voltage and current requirements. Tighten the M3.5 terminal screws to a tightening torque of 1.0 to 1.3 N*m. Failure to tighten the terminal screws may cause overheating and fire. Operating Instructions Removing and Installing the Contact Unit Illuminated Pushbuttons and Pilot Lights When using the CW series switches in a safetyrelated circuit of a control system, observe safety rules and regulations of each country concerning particular applications of the actual machines and facilities. Perform risk assessment before operation to ensure safety. 1. To remove the contact block from the operator, push the yellow locking lever and turn it to the left. Removing the Lens To remove the lens from an illuminated pushbutton or pilot light, insert a flat screwdriver under the flange of the lens at 90 from the TOP marking and twist the screwdriver. Locking Lever Do not insert the screwdriver too far and do not apply excessive force to the lens, otherwise the bezel surface may be damaged. Operating Conditions Main parts of the CW series switches are made of plastic. Do not scratch the surface with a sharp object or apply excessive electric shock or load, otherwise the switches may be damaged. In particular, keep the button, lens and bezel from such damage, otherwise appearance and function may be impaired. Panel Mounting First remove the contact block and then the locking ring from the operator. Insert the operator into the panel cut-out from the front, tighten the locking ring from the back, then install the contact block to the operator. 1. Mounting hole dimensions are in compliance with IEC60947-5-1. 2. If the anti-rotation projection is removed from the bezel, CW series switches can be mounted in o22.3mm mounting holes. To remove the antirotation projection, remove the gasket and use cutting pliers to break the projection. Anti-rotation projection Recess in mounting hole TOP Marking Screwdriver Insertion Angle Panel Approx. 30 Panel Surface TOP marking on illuminated pushbuttons, pushbuttons and pilot lights Locking Ring Installing the Lens Turn the groove in the lens to the TOP marking on the operator housing. With the groove aligned with the ridge, press the lens in. TOP Marking Ridge TOP marking on selector and key selector switches Contactors Mounting Hole Installation in Panel Cut-out Remove the locking ring from the operator. With the anti-rotation projection on the operator aligned with the recess in the mounting hole, insert the operator into the mounting hole. Tighten the locking ring from the rear of the panel. TOP Marking Timers Do not apply detergents, cutting oils, or chemicals which may impair the function and appearance of the CW series switches. Screwdriver Insertion Direction 2. To install, align the TOP marking on the operator with the TOP marking on the contact block mounting adaptor, and turn the locking lever to the right. Relays & Sockets In corrosive gas or high-temperature, high-humidity environments, contact failure due to corrosion or color change or breakage of the housing may occur. Groove in the Lens Marking Marking film can be applied for inscriptions or identification. Terminal Blocks Note for Panel Mounting When installing the operator in a panel cut-out, use the optional locking ring wrench (MW9Z-T1) to tighten the locking ring to a recommended tightening torque of 1.2 N*m. Do not use pliers and do not tighten excessively, otherwise the operator may be damaged. Applicable Marking Film Size Illuminated Pushbutton (Round Flush) Pilot Light (Round Flush, Round Extended) Illuminated Pushbutton (Round Extended) 13.8 9 5. o1 12.6 9 5. o1 800-262-IDEC (4332) * USA & Canada Circuit Breakers Thickness: 0.2mm maximum Film material: Polyester (recommended) Note: Film is not supplied and must be provided by the user. 1705151132 Signaling Lights Notes for Operation Switches & Pilot Devices Safety Precautions 607 Switches & Pilot Devices Operating Instructions, con't Pushbuttons Contact Blocks and LED Modules Applicable Crimping Terminals Pushbutton caps cannot be removed. Do not tamper with the cap using a screwdriver or pliers, otherwise it may be damaged. To remove the contact block from the operator, insert a flat screwdriver under the latch and push the screwdriver down as shown below. Before removing the LED module, first remove all contact blocks, and then remove the LED module in the same manner. Spade terminal When using crimping terminals, be sure to use insulating tubes or insulated crimping terminals. Key Selector Switches 8.1 max. Insulation Tube Crimping Terminal Wire To prevent malfunction and damage, take the following precautions. * Completely insert the key before turning. 0.5 min. Wiring * Besides the standard key (0H), six other keys are available. Use only a key with a number that matches the number on the switches' key cylinder. (The standard key does not have a key number.) Applicable Wires o1.6 max. * Keys are available in two shapes. -0H (standard), 1H, 2H: reversible keys -3H, 4H, 5H, 6H: non-reversible keys Make sure of correct insertion direction. Stranded wire: 2.0 mm2 maximum (14AWG) Solid wire: o1.6 mm maximum Ferrule When connecting two ferrules to one terminal, use ferrules without insulation. 1.7 max. * Do not remove the key while turning. Insulation 8.0 max. 8.0 max. One or two wires can be connected to the terminal. Timers Relays & Sockets 3.6 min. Turn the selector operator or key to the detent positions. 11.5 max. 1.7 max. Signaling Lights Selector Switches 6.9 max. Switches & Pilot Devices o22mm - CW Series 8.0 max. When using spade terminals or ferrules, ensure that they are inserted completely. Ring terminals cannot be used. Screw Tightening Torque Circuit Breakers Terminal Blocks Contactors Tighten the M3.5 terminal screws to a recommended torque of 1.0 to 1.3N*m. 608 www.IDEC.com 1705151132