SAW Components
SAW Rx filter
GSM 1800 Rx
Series/type:
Ordering code: B3832
B39172B3832U410
Date:
Version: June 27, 2012
2.0
EPCOS AG 2015. Reproduction, publication and dissemination of this publicatio n, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
2June 27, 2012
B3832
1747.5 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW Rx filter
Data sheet
Application
Low-loss filter GSM 1800 Rx
Unbalanced to Unbalanced operation
Usable passband of 75MHz
No matching required for operation at 50
Features
Package size 3.0 x 3.0 x 1.1 mm3
Package code DCC6C
RoHS compatible
Approximate weight 0.037 g
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitive Level 1
Filter surface passivated
Pin configuration
2 Input unbalanced
5 Output unbalanced
1,3,4,6 To be grounded
3June 27, 2012
B3832
1747.5 MHz
SAW Components
SAW Rx filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Characteristics
Temperature range for specification: T = –0 ˚C to +70 ˚C
Terminating source impedance: ZS=50
Terminating load impedance: ZL=50
min. typ.
@ 25 ˚C max.
Centre frequency fC 1747.5 MHz
Maximum insertion attenuation αmax
1710.0 ... 1785.0 MHz 3.1 4.0 dB
Amplitude ripple (p-p) ∆α
1710.0 ... 1785.0 MHz 1.1 2.0 dB
VSWR
Input 1710.0 ... 1785.0 MHz 2.2 3.0
Output 1710.0 ... 1785.0 MHz 2.2 3.0
Absolute attenuation αabs
1330.0... 1405.0 MHz 42 45 dB
1464.0... 1539.0 MHz 40 43 dB
1615.0 MHz 28 35 dB
1690.0 MHz 5 12 dB
1805.0 MHz 5 14 dB
1880.0 MHz 25 32 dB
1956.0... 2031.0 MHz 32 34 dB
4June 27, 2012
B3832
1747.5 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW Rx filter
Data sheet
Maximum ratings
Operable temperature range T –40/+85 ˚C
Storage temperature range Tstg –40/+85 ˚C
DC voltage VDC 0 V
ESD voltage VESD 501)
1) acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Vmachine model, 1 pulse
Input power
1710.0 ... 1785.0 MHz PIN 9.5 dBm continuous wave, 100000 hrs,
85˚C
5June 27, 2012
B3832
1747.5 MHz
SAW Components
SAW Rx filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Transfer function
Transfer function (wideband)
6June 27, 2012
B3832
1747.5 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW Rx filter
Data sheet
Smith charts
S11 function
S22 function
7June 27, 2012
B3832
1747.5 MHz
SAW Components
SAW Rx filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
References
Type B3832
Ordering code B39172B3832U410
Marking and package C61157-A7-A67
Packaging F61074-V8168-Z000
Date codes L_1126
S-parameters B3832_NB.s2p, B3832_WB.s2p
see file header for port/pin assignment table
Soldering profile S_6001
RoHS compatible defined as compatible with the following documents:
"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Matching coils See Inductor pdf-catalog
http://
www
.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
w
ww.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2012. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
t
he international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
t
he type in question please also contact one of our Sales Offices.
8June 27, 2012
Important notes
T
he following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.