NV-series
10
Specifications
General Specifications
*The SRAM (internal RAM) is backed up by the battery. If backing up the data is required, purchase the NV-BAT01 Battery separately.
Performance Spec ifications
*1. This is the estimated time before brightness is reduced by half at room temperature and humidity. It is not a guaranteed value.
*2. The estimate applies to operation when only custom switches are placed on the screen.
*3. This value does not include 1-dot box of frame line.
*4. The capacity of the SD memory card is 32 MB to 1 GB for PT system program version 1.0@.
*5. SD memory cards are shipped pre-formatted from the factory, so there is normally no need to format them. If an SD memory card is formatted
with the standard formatting utility provided with a personal computer, its file system will not conform to the SD memory card standard. Always
use the formatting software provided by SD memory card makers.
*6. The display device of NV3Q-SW@1 of the Lot No. 110999 or earlier is STN, and the Lot No. 111000 or later is TFT.
Item Specifications
Model NV3W-M@20/M@40 NV3W-M@20L NV4W-M@21/M@41 NV3Q-MR@1 NV3Q-SW@1
Rated power supply 24 VDC 5 VDC 24 VDC
Operating voltage
range 21.6 to 26.4 VDC 4.5 to 5.5 VDC 21.6 to 26.4 VDC
Current
consumption 2 W max. (80 mA max.) 1 W max. (200 mA max.) 1.7 W max. (70 mA max.) 2.4 W max. (100 mA max.) 3.6 W max. (150 mA max.)
Ambient operating
temperature 0 to 50 °C
Ambient operating
humidity 20% to 85% (with no condensation)
Ambient st orage
temperature -20 to 60 °C
Ambient st orage
humidity 10% to 85% (with no condensation)
Diel ectric strength Between the power supply terminals and the case 500 VAC for 1 min with a cutoff current of 10 mA (at initial state)
Insulation resistance Between the power supply terminals and the case 100 MΩ (at 500 VDC) (at initial state)
Vibration resistance 10 to 55 Hz with 0.75-amplitude for 10 min each in X,
Y, and Z directions, 1 sweep per min
5 to 9 Hz, 3.5-mm single
amplitude, 9 to 150 Hz,
9.8 m/s2, 10 times each in
X, Y, and Z directions
(1 octave/min)
10 to 55 Hz with 0.75-amplitude for 10 min each in X,
Y, and Z directions, 1 sweep per min
Shock resistance 98m/s2 4 times each in X, Y, and Z directions 147m/s2 3 times each in X,
Y, and Z directions 98m/s2 4 times each in X, Y, and Z directions
Noise immunity 1,000 Vp-p with pulse widths of 50 ns and 1 μs between power supply terminals (via simulator)
Resistance to
environment
For NV3W and NV3Q IP65 (at initial state), For NV4W IP67 (at initial state)
Dust proof and drip proof only from the front of the panel (using Waterproof Packing at the contact surface with the panel)
Replace the Waterproof Packing each time you reinstall the PT.
Battery life
expectancy --- Battery life expectancy: 5 yr (at 25 °C) * Battery life expectancy:
3 yr (at 25 °C) *
Safety standards UL 508 and EC Directives
Weight 160 g max. 240 g max. 210 g max.
Item Specifications
Model NV3W-MG@@ (L)/MR@@ (L) NV4W-M@21/M@41 NV3Q-MR@1/ SW@1
Display device STN monochrome LCD NV3Q-MR: STN monochrome LCD
NV3Q-SW: TFT color LCD *6
Numbe r of dots 128 × 64 dots (H × V) 320 × 120 dots (H × V) 320 × 240 dots (H × V)
Effective display size 70 × 35 mm (H × V) 109 × 41 mm (H × V) 70 × 53 mm (H × V)
Servi ce Lif e 50,000 hours min. *1
Backlights
NV3W-MG : LED backlights, 3 colors
(green, orange, and red)
NV3W-MR : LED backlights, 3 colors
(white, pink, and red)
NV4W-MG : LED backlights, 3 colors
(green, orange, and red)
NV4W-MR : LED backlights, 3 colors
(white, pink, and red)
NV3Q-MR: LED backlights, 3 colors
(white, pink, and red)
NV3Q-SW: LED backlight, 1 color (white)
Touch
switches
Method Analog resistance membrane
Operating force
0.5 N max. 0.8 N max.
Life expec tancy
100 million operations min. (at 25 °C)
Switches 50 max. per screen *2 100 max. per screen *2
Size 8 dots × 8 dots min. *3
External memory ---
SD memory card (32 MB to 2 GB) *4
Manufacturers for which operation has been confirmed: Panasonic
SD standard *5
Host
communic
ations CO M Port
NV3W-M@20(L) :
RS-232C (not isolated), Transmission
distance: 15 m, Connector : 8-pin
NV3W-M@40 :
RS-422A/485 (not isolated),
Transmission distance: 500 m,
Connector : 8-pin
NV4W-M@21:
RS-232C (not isolated), Transmission
distance: 15 m, Connector:8-pin
NV4W-M@41:
RS-422A/485 (not isolated),
Transmission distance: 500
m,Connector: 8-pin
NV3Q-@@21 :
RS-232C (not isolated), Transmission
distance: 15 m, Connector: 8-pin
NV3Q-@@41 :
RS-422A/485 (not isolated),
Transmission distance: 500 m,
Connector: 8-pin
Support
Software
communic
ations
Tool Port RS-232C (not isolated) via Mini DIN 5-pin
connector --- ---
USB port --- USB 1.1 Mini-B, Transmission distance: 5
m max.
USB 1.1 TYPE-B, Transmission distance:
5 m max.
Applicable Support
Software
NV-Designer version 1.0 or higher
(Included with CX-One version 3.2 or in
CX-One Lite version 4.0.)
NV-Designer version 1.1 or higher
(Included with CX-One version 4.03 or in
CX-One Lite version 4.03.)
NV-Designer version 1.0 or higher
(Included with CX-One version 3.2 or in
CX-One Lite version 4.0.)