!Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. POSISTORr for Circuit Protection Cat.No.R90E-14 R90E.pdf Mar.4,2014 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant s s s All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). R90E.pdf Mar.4,2014 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. CONTENTS Mar.4,2014 1 POSISTORr and "POSISTOR" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Part Numbering 2 Basic Characteristics of POSISTORr 5 Selection Guide 7 Application Matrix 8 Application Notes 9 Overcurrent Protection Chip Type 13 Chip Type Specifications and Test Methods 22 2 Overcurrent Protection Narrow Current Band 30V Series 25 3 Overcurrent Protection Narrow Current Band 51/60V Series 28 4 Overcurrent Protection Narrow Current Band 140V Series 33 5 Overcurrent Protection 16V Series 36 6 Overcurrent Protection 24/30/32V Series 39 7 Overcurrent Protection 56/80V Series 46 8 Overcurrent Protection 125/140V Series 51 9 Overcurrent Protection 250/265V Series 56 1 PTGL Series Narrow Current Band Specifications and Test Methods 64 PTGL Series Specifications and Test Methods 66 10 Inrush Current Suppression (Less than 100F) 67 11 Inrush Current Suppression for High Capacitance (100F or more) 68 Inrush Current Suppression Specifications and Test Methods 69 12 Overheat Sensing Chip Tight Tolerance Type 70 13 Overheat Sensing Chip Type 71 Overheat Sensing Chip Type (Related Data) 72 Overheat Sensing Chip Tight Tolerance Type (Reference Data) 73 Overheat Sensing Chip Type (Reference Data) 76 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods 78 Overheat Sensing Chip Type Specifications and Test Methods 81 14 Overheat Sensing Lead Type 82 Temperature Sensor Lead Type Specifications and Test Methods 86 !Caution/Notice 87 Chip Type PRG/PRF Series Package 99 Lead Type PTGL/PTF Series Package 100 2 3 4 5 6 7 8 9 10 11 12 13 14 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 o Part Numbering PTC Thermistors (POSISTORr) for Overcurrent Protection Chip Type (Part Number) PR G 18 BB 470 M B1 RB q w e r t y u i qProduct ID tResistance Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Product ID PR PTC Thermistors Chip Type wSeries Code Series G for Overcurrent Protection Ex. Code Resistance 4R7 4.7 eDimensions (LgW) 470 47 471 470 Code Dimensions (LgW) EIA 15 1.00g0.50mm 0402 18 1.60g0.80mm 0603 Code Resistance Tolerance 21 2.00g1.25mm 0805 M 20% rTemperature Characteristics yResistance Tolerance uIndividual Specifications Code Temperature Characteristics BB Curie Point 100C BC Curie Point 90C Ex. Code Individual Specifications B1 Structure, others iPackaging 2 Code Packaging RA Embossed Taping (4mm Pitch) (4000 pcs.) RB Paper Taping (4mm Pitch) (4000 pcs.) RC Paper Taping (2mm Pitch) (10000 pcs.) RK Embossed Taping (4mm Pitch) (3000 pcs.) R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 PTC Thermistors (POSISTORr) for Overheat Sensing Chip Type (Part Number) PR F 18 BB 471 Q B5 RB q w e r t y u i tResistance qProduct ID Expressed by three figures. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Product ID PR PTC Thermistors Chip Type wSeries Ex. Code Series F for Overheat Sensing Code Resistance 471 470 yResistance Tolerance eDimensions (LgW) Code Resistance Tolerance Sensing Temp. Tolerance Code Dimensions (LgW) EIA Q Special Tolerance 5C 15 1.00g0.50mm 0402 R Special Tolerance 3C 18 1.60g0.80mm 0603 21 2.00g1.25mm 0805 uIndividual Specifications Ex. Code Individual Specifications B5 Structure, others rTemperature Characteristics Code Temperature Characteristics AR Curie Point 120C iPackaging AS Curie Point 130C Code Packaging BA Curie Point 110C RA Embossed Taping (4mm Pitch) (4000 pcs.) BB Curie Point 100C RB Paper Taping (4mm Pitch) (4000 pcs.) BC Curie Point 90C RC Paper Taping (2mm Pitch) (10000 pcs.) BD Curie Point 80C BE Curie Point 70C BF Curie Point 60C BG Curie Point 50C 3 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 PTC Thermistors (POSISTORr) for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type (Part Number) PT GL 07 AR 220 M q w e r t y 3P51 A0 u i tResistance qProduct ID Product ID PT PTC Thermistors wSeries Expressed by three-digit alphanumerics. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Ex. Code Series Code Resistance FL for Overheat Sensing Lead Type R22 0.22 FM for Overheat Sensing with Lug-terminal 2R2 2.2 for Current Control (Over Current Protection * Inrush Current Suppression) Lead Type 220 22 GL yResistance Tolerance eDimensions Code Resistance Tolerance Code Dimensions H 25% 04 Nominal Body Diameter 4mm Series K 10% 05 Nominal Body Diameter 5mm Series M 20% 07 Nominal Body Diameter 7mm Series N 30% 09 Nominal Body Diameter 9mm Series Q Special Tolerance 10 Nominal Body Diameter 10mm Series 12 Nominal Body Diameter 12mm Series uIndividual Specifications 13 Nominal Body Diameter 13mm Series Ex. 14 Nominal Body Diameter 14mm Series 16 Nominal Body Diameter 16mm Series 18 Nominal Body Diameter 18mm Series 20 Nominal Body Diameter 20mm Series rTemperature Characteristics 4 Code Temperature Characteristics AR Curie Point 120C AS Curie Point 130C BA Curie Point 110C BB Curie Point 100C BC Curie Point 90C BD Curie Point 80C BE Curie Point 70C BF Curie Point 60C BG Curie Point 50C BH Curie Point 40C Code Individual Specifications 3P51 Lead Type, others iPackaging Code Packaging A* Ammo Pack B* Bulk R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Basic Characteristics of POSISTORr cBasic Characteristics Resistance - Temperature Characteristic 5 10 Resistance Change Ratio, R/R25C POSISTORr has three main characteristics. 1. Resistance - Temperature Characteristics Although there is a negligible difference between the normal and "Curie Point" temperature, POSISTORr shows almost constant resistance-temperature characteristics. Yet they have resistance-temperature characteristics that cause resistance to sharply increase when the temperature exceeds the Curie Point. The Curie Point (C.P.) is defined as the temperature at which the resistance value is twice the one at 25C. BD BC BB AR 4 10 3 10 2 10 10 1 0 100 150 200 C.P. (AR: 120C) Temperature (C) Current - Voltage Characteristic (Static Characteristic) 3 10 Ta=25C Current (mA) 2. Current - Voltage Characteristics (Static Characteristic) This shows the relation between applied voltage when voltage applied to POSISTORr causes balancing of inner heating and outer thermal dissipation and stabilized current. This has both a maximum point of current and constant output power. 50 2 10 10 1 0.1 1 10 2 10 Voltage (V) Current - Time Characteristic (Dynamic Characteristic) 1.5 Current (A) 3. Current - Time Characteristics (Dynamic Characteristic) This shows the relation between current and time before inner heating and outer thermal dissipation arrive at equilibrium state. This features having large initial current and abruptly continuous attenuating portion. Ta=25C 1.0 0.5 Time (sec.) 5 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Basic Characteristics of POSISTORr Technical Terms Load Curve of Circuit and Voltage - Current Characteristics a Load curve in normal state of POSISTORr (normal current) b Load curve in abnormal state (abnormal current) c Voltage-current characteristics of POSISTORr Vp b E RL I Current (log) 1. Protective Threshold Current The maximum current value is called the "Protective Threshold Current" for Voltage vs. Current characteristics (static). When smaller than the protective threshold current flows in POSISTORr, it reaches its stability (as shown in figure on right) at the intersection (A) of the load curve (a) and voltage-current characteristics of POSISTORr(c). And POSISTORr works as a normal fixed resistor. However, when larger than protective threshold current flows, it stabilizes at the intersection (B) with the load curve (b). c a A E - Vp I = RL B Voltage (log) 1000 800 Trip Current 600 Protective Threshold Current 400 Hold Current 200 0 -20 0 20 40 60 Ambient Temperature (C) Operating Current Current (A) 3. Operating Time A period starting from the voltage input to the moment current itself sharply attenuates is called "Operating Time." Conventionally, operation time (t0) is determined to be the period until inrush current (I0) decreases to a level one half the original inrush current (I0/2). Protective Threshold Current Range Current (mA) 2. Protective Threshold Current Range Protective threshold current varies depending on the ambient temperature, resistance value, temperature characteristics and shape. (see Figure on right) The maximum value of trip current and the minimum value of the hold current are in the range of ambient temperature -10 to +60C. That is, when a current is smaller than the hold current, POSISTORr works only as a fixed resistor. When larger than the trip current flows, however, POSISTORr protects the circuit from overload. I0 Operating Time I0 2 t0 Time (sec.) 6 E R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Selection Guide Please confirm the parameters according to the following questions. The best selection is the product that matches three parameters. o Confirmation Items How much current flows in the circuit at normal conditions? What is the potential maximum voltage applied to POSISTORr? How much current flows in the circuit at abnormal conditions? o Example Usual Current 200mA Line Voltage 140V Abnormal Current 580mA o Selection Standards Line voltage V Maximum voltage of POSISTORr Usual current V Hold current of POSISTORr Hold Trip Current at +60C Current at -10C (mA) (mA) Abnormal current U Trip current of POSISTORr Max. Current (A) Resistance (at 25C) (ohm) Body Diameter (D) (mm) Thickness (T) (mm) 900 1.7 4.7 20% 18.5 5.5 1050 2.0 3.3 20% 18.5 5.5 230 0.5 33 20% 7.4 6.0 140 330 1.0 22 20% 9.6 6.0 170 400 1.0 15 20% 11.6 6.0 140 220 510 1.0 10 20% 13.0 6.0 PTGL13AR6R8M6C01B0 140 290 670 1.0 6.8 20% 14.0 6.0 PTGL16AR5R6M6C01B0 140 340 780 2.0 5.6 20% 17.0 6.0 Part Number Max. Voltage (V) PTGL18AR4R7M6B72B0 125 360 PTGL18AR3R3M6B72B0 125 420 PTGL07AR330M6A51B0 140 100 PTGL09AR220M6C61B0 140 PTGL10AR150M6C61B0 140 PTGL12AR100M6C01B0 PTGL12AR100M6C01B0 is the best selection in this case. 7 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Application Matrix Series Application AV equipment Information equipment Communications equipment Car electronics Home electronics Household equipment Power supply 8 Plasma TV LCD TV Projection TV CATV STB Video camera Digital camera DVD recorder Audio Electric keyboard, Electronic music instrument Digital mobile audio MD/CD player TV game Portable game Laptop Desktop computer Server Printer Scanner LCD display USB access device HDD CD/DVD-ROM/RAM Copy machine Electronic dictionary/databook Electronic blackboard Electronic automatic exchange Transmission equipment PBX Cordless telephone Fax machine Modem Cellular phone Headset Cellular phone base station Intercom Engine control ECU Drive control ECU Air bag Anticollision radar ABS/ESC Instrument/display panel, Meter Rechargeable battery for EV/HEV Car air conditioner HID/LED headlight, AFS LED tail light LED interior light Retractable electric mirror Door lock, trunk opener Power seat Shock absorber VICS, ETC Burglar alarm Car navigation Car audio Refrigerator Microwave, Oven Electric rice-cooker IH cooking device Air conditioner Fan heater Cleaner Clothes washer, cloth dryer Ventilator Hot-water pot Illumination device Massage chair, healthcare equipment Hot water spray toilet seat Electric power tool Switching supply Inverter power AC adapter, battery charger Overcurrent Protection Chip type Lead type PRG PTGL o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Overheat Sensing Chip type Lead type PRF PTFL, PTFM o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Application Notes c Inrush Current Limit for Power Supply POSISTORr Lead type: PTGL series 1. Applications POSISTORr is an integrated solution to work as both current limit resistor and overcurrent fuse. It works as a stable resistor in normal operation and protects itself against overcurrent situations. (1) High wattage power supply (flat display panels etc.) (2) Power supply for fluorescent lights (3) Other switching power supplies Replacement idea for a resistor and fuse solution POSISTORr + - + - Load Load 2. Benefits (1) Protection against overcurrent situations (2) Automatic reset from protective trip mode (3) Space-saving (4) Various characteristics to meet a suitable resistance value 3. Recommended part numbers Choose an appropriate part number based on the resistance value required to the inrush current limit. Review the maximum voltage. Application For high wattage power supply Part Number Max. Voltage (V) Body Diameter (mm) Thickness (mm) Lead Space (mm) Lead Diameter (mm) More Details PTGL13AR100H8B72B0 10 25% 14.0 6.0 7.5 0.60 page 57 PTGL12AR150H8B72B0 15 25% 12.5 6.0 7.5 0.60 page 57 PTGL14AR180M9C01B0 18 20% 15.7 6.5 10.0 0.65 page 57 PTGL09AR250H8B52B0 265 PTGL09AR390M9C61B0 For power supply of electronic fluorescent ballasts Resistance (at 25 C) (ohm) 25 25% 10.0 6.0 5.0 0.60 page 57 39 20% 10.0 6.5 6.5 0.65 page 56 PTGL07AR560M9B51A0 56 20% 8.2 6.5 5.0 0.60 - PTGL07AR820M9B51A0 82 20% 8.2 6.5 5.0 0.60 - 120 20% 7.8 6.0 5.0 0.50 page 67 180 20% 7.8 6.0 5.0 0.50 page 67 PTGL07AS121M0N51A0 PTGL07AS181M0N51A0 280 Please ask for details. 9 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Application Notes c Overcurrent Protection for Communication Facility POSISTORr Lead type: PTGL series 1. Applications POSISTORr is an efficient device to protect a telephone line interface (SLIC: Subscriber-Loop-Interface-Circuit) against AC line contact. (1) Landline telephones or FAX machines (2) Telephone interface of STB, VoIP equipment (3) Any other equipment of communication facility having a phone line interface Replacement idea for a current fuse. Ring Ring POSISTORr SLIC SLIC Tip Tip 2. Benefits (1) Automatic reset from protective trip up to 265V AC line contact (2) Compatible with the 600V over voltage test by UL60950 (3) High resistance to the lighting surge (*A surge absorber is still required to protect SLIC) 3. Recommended part numbers Choose an appropriate part number based on the hold current and on the resistance value required to the operation current of SLIC. Part Number Max. Max. Voltage Current (V) (A) Hold Current (at +60 C) (mA) Trip Current (at -10 C) (mA) Resistance (at +25 C) (ohm) Body Thickness Diameter (mm) (mm) Lead Lead Space Diameter (mm) (mm) More Details PTGL07BB220N0B52A0 250 0.5 90 300 22 30% 8.0 6.0 5.0 0.6 page 56 PTGL09AR390N0B52A0 250 0.6 100 280 39 30% 10.0 6.0 5.0 0.6 page 56 PTGL09AR250H8B52B0 265 1.0 118 330 25 25% 10.0 6.0 5.0 0.6 page 57 Please ask for details. 10 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Application Notes c Current Limiter for LED Chip POSISTORr: PRG series 1. Applications POSISTORr is an effective current limit solution based on LED's allowable current and temperature characteristics. (1) LED lighting instruments (2) LED backlight of flat displays See below figures. Higher brightness vs. a fixed resistor LED Current IC LED Current Protected by POSISTORr IC Allowable LED Working Zone Allowable LED Working Zone Ambient Temp. Ambient Temp. LED Driving Circuit Current Limit by a fixed resistor LED Current 2. Benefits (1) Higher LED brightness versus a fixed resistor. LED can work in the smaller series resistance with POSISTORr at normal operation temperature. The number of LEDs is possibly reduced. (2) LED lifetime may be extended due to the current limiting function of the POSISTORr in cases of overheat or overcurrent situation. (3) Small 0805 package allows the POSISTORr to be placed close to the LED. It offers accurate detection of ambient temperature near LED and increases flexibility of packaging. 3. Recommended part numbers Choose an appropriate part number having max. voltage and resistance value. Review the protective threshold current range based on the operating current and temperature of the LED. Part Number Max. Voltage (V) Max. Current (A) Hold Current (at +60 C) (mA) Trip Current (at -10 C) (mA) Resistance (at +25 C) (ohm) Curie Point (C) * More Details PRG21BC0R6MM1RA 6 10 285 1100 0.6 20% 90 page 14 PRG21BC0R2MM1RA 6 10 500 2000 0.2 20% 90 page 14 PRG21BC1R0MM1RA 12 10 220 850 1.0 20% 90 page 14 PRG21BC2R2MM1RA 16 6.5 150 600 2.2 20% 90 page 14 PRG21BC3R3MM1RA 20 6.0 120 480 3.3 20% 90 page 14 PRG21BC6R8MM1RA 30 3.5 80 320 6.8 20% 90 page 14 PRG21BC4R7MM1RA 30 5.0 100 400 4.7 20% 90 page 14 *Curie Point means the temperature at which the resistance value reaches twice the resistance at 25C. Please ask for details. 11 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Application Notes c Overheat/Overcurrent Protection for High Brightness LED Leaded POSISTORr: PTGL series & Chip POSISTORr: PRG series 1. Applications POSISTORr is an effective solution to protect the LED against overheat and overcurrent situation. (1) LED lighting instruments (Appliances, Automotive etc.) a) Overcurrent Resistance up !! Heat up by overcurrent ! b) Overheat Resistance up !! Heat up by overheat situation ! 2. Benefits (1) Posistor installed in series with LED provides both overheat and overcurrent protection (2) No additional driver IC or software required (3) Automatic reset from protective trip mode (4) 0603 and 0805 SMD type available (smaller than 1/2W or 1W chip resistor) 3. Recommended part numbers Choose an appropriate part number having max. voltage and resistance value. Review the protective threshold current range based on the operating current and temperature of the LED. Type Max. Voltage (V) Max. Current (A) Hold Current (at +60 C) (mA) Trip Current (at -10 C) (mA) Resistance (at +25 C) (ohm) Curie Point (C) * More Details 6 10 285 1100 0.6 20% 90 page 14 PRG21BC0R2MM1RA 6 10 500 2000 0.2 20% 90 page 14 PRG21BC1R0MM1RA 12 10 220 850 1.0 20% 90 page 14 PRG21BC2R2MM1RA 16 6.5 150 600 2.2 20% 90 page 14 PRG21BC3R3MM1RA 20 6.0 120 480 3.3 20% 90 page 14 PRG21BC6R8MM1RA 30 3.5 80 320 6.8 20% 90 page 14 PRG21BC4R7MM1RA 30 5.0 100 400 4.7 20% 90 page 14 PTGL04AS100K2N51B0 30 1.5 122 240 10 10% 130 page 25 PTGL04AS100K2B51B0 30 2.0 167 330 10 10% 130 page 25 PTGL05AS3R9K2B51B0 30 3.5 269 530 3.9 10% 130 page 25 PTGL07AS2R7K2B51B0 30 4.5 336 663 2.7 10% 130 page 25 PTGL07AS1R8K2B51B0 30 5.0 420 829 1.8 10% 130 page 25 PTGL09AS1R2K2B51B0 30 6.0 556 1097 1.2 10% 130 page 25 PTGL12AS0R8K2B51B0 30 7.0 685 1352 0.8 10% 130 page 25 PTGL04AS100K3B51B0 51 1.0 168 332 10 10% 130 page 28 PTGL05AS6R8K3B51B0 51 1.5 197 388 6.8 10% 130 page 28 PTGL07AS3R3K3B51B0 51 3.0 307 606 3.3 10% 130 page 28 PTGL09AS2R2K3B51B0 51 4.0 412 814 2.2 10% 130 page 28 PTGL12AS1R2K3B51B0 51 5.0 592 1168 1.2 10% 130 page 28 PTGL07AR220M3P51B0 56 1.0 90 240 22 20% 120 page 46 PTGL07AR8R2M3P51B0 56 1.0 130 350 8.2 20% 120 page 46 PTGL09AR150M3B51B0 56 1.2 150 400 15 20% 120 page 46 PTGL10AR3R9M3P51B0 56 2.0 210 550 3.9 20% 120 page 46 PTGL09AR4R7M3B51B0 56 2.0 270 700 4.7 20% 120 page 46 PTGL10AR3R9M3B51B0 56 2.0 300 800 3.9 20% 120 page 46 PTGL14AR3R3M3B71B0 56 2.5 380 980 3.3 20% 120 page 46 Part Number PRG21BC0R6MM1RA SMD type Lead type * Curie Point means the temperature at which the resistance value reaches twice the resistance at 25C. Please ask for details. 12 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection 1 Overcurrent Protection Chip Type e e T Overcurrent Protection device with resettable function suitable for current limiting resistor. This product is a chip type PTC thermistor for overcurrent protection that is suitable for the following. * Countermeasure for short circuit testing * Current limiting resistor g L Part Number PRG15_RC PRG18_RB PRG21_RA PRG21_RK c Features 1. Rapid operation to protect the circuit in an overcurrent condition abnormality such as a short circuit. By removing the overcurrent condition, these products automatically return to the initial condition and can be used repeatedly. 2. Suitable for countermeasure to short circuit test in safety standard. 3. Stable resistance after operation due to ceramic PTC. 4. Similar size (0603 size) is possible due to the large capacity for electric power. 5. Possible to use these products as current limiting resistors with overcurrent protection functions 6. The SMD type's small size and light weight are helpful in miniaturizing the circuit. W Dimensions (mm) L W T e g 1.00.05 0.50.05 0.50.05 0.15 to 0.35 1.60.15 0.80.15 0.80.15 0.1 to 0.6 2.00.2 1.250.2 0.90.2 0.2 min. 0.5 min. 2.00.2 1.250.2 1.250.2 0.2 min. 0.5 min. Chip Type 0402(1005) Size Max. Voltage (V) Hold Current (at +60C) (mA) Hold Current (at +25C) (mA) Trip Current (at +25C) (mA) PRG15BC330MM1RC 30 25 38 73 92 1200 33 20% PRG15BC220MM1RC 16 28 43 90 113 1000 22 20% PRG15BC180MM1RC 16 31 47 98 125 1200 18 20% PRG15BC4R7MM1RC 9 60 91 172 216 2500 4.7 20% PRG15BC3R3MM1RC 9 71 110 205 260 3500 3.3 20% PRG15BC2R2MM1RC 6 88 134 252 318 3500 2.2 20% Hold Current (at +25C) (mA) Trip Current (at +25C) (mA) Trip Current (at -10C) (mA) Max. Current (mA) Resistance (at +25C) (ohm) Part Number Trip Current (at -10C) (mA) Max. Current (mA) Resistance (at +25C) (ohm) Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. Chip Type 0603(1608) Size Part Number Max. Voltage (V) Hold Current (at +60C) (mA) PRG18BB471MB1RB 24 7 10 21 25 60 470 20% PRG18BB221MB1RB 24 10 14 29 35 130 220 20% PRG18BB101MB1RB 24 15 21 45 55 300 100 20% PRG18BB470MB1RB 24 20 29 61 75 630 47 20% PRG18BB330MB1RB 24 25 36 71 85 900 33 20% PRG18BC6R8MM1RB 20 80 120 260 320 3500 6.8 20% PRG18BC4R7MM1RB 20 100 155 330 400 5000 4.7 20% Continued on the following page. 13 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. Max. Voltage (V) Hold Current (at +60C) (mA) Hold Current (at +25C) (mA) Trip Current (at +25C) (mA) Trip Current (at -10C) (mA) Max. Current (mA) Resistance (at +25C) (ohm) PRG18BC3R3MM1RB 16 120 180 400 480 6000 3.3 20% PRG18BC2R2MM1RB 12 150 220 500 600 6500 2.2 20% PRG18BC1R0MM1RB 6 220 330 740 850 7500 1.0 20% Trip Current (at +25C) (mA) Trip Current (at -10C) (mA) Max. Current (mA) Resistance (at +25C) (ohm) 22 20% 1 Part Number Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. This series is recognized by UL. Chip Type 0805(2012) Size Max. Voltage (V) Hold Current (at +60C) (mA) Hold Current (at +25C) (mA) PRG21BB220MB1RK 20 30 44 91 110 1100 PRG21BB150MB1RK 20 40 59 116 140 1600 15 20% PRG21BC6R8MM1RA 30 80 120 260 320 5500 6.8 20% PRG21BC4R7MM1RA 30 100 155 330 400 8000 4.7 20% PRG21BC3R3MM1RA 20 120 180 400 480 6000 3.3 20% PRG21BC2R2MM1RA 16 150 220 500 600 6500 2.2 20% PRG21BC1R0MM1RA 12 220 330 740 850 10000 1.0 20% PRG21BC0R6MM1RA 6 285 420 920 1100 10000 0.6 20% PRG21BC0R2MM1RA 6 500 750 1620 2000 10000 0.2 20% Part Number Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. This series is recognized by UL. c Standard Land Pattern Dimensions Solder resist Land c Chip b a (in mm) Dimensions (mm) Soldering Part Number Methods a b c Chip (LgW) Reflow Soldering 0.5 0.4-0.5 0.5 1.0g0.5 PRG15 Reflow Soldering 1.6g0.8 0.6-0.8 0.6-0.7 0.6-0.8 PRG18 Reflow Soldering 2.0g1.25 1.0-1.2 0.5-0.7 1.0-1.2 PRG21 c Protective Threshold Current Range PRG15BC330MM1RC PRG15BC220MM1RC 100 120 90 100 80 Current (mA) 70 Trip current Current (mA) Trip current 60 Protective threshold current 50 80 Protective threshold current 60 40 40 30 Hold current 20 Hold current 20 10 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 Continued on the following page. 14 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range PRG15BC180MM1RC 1 PRG15BC4R7MM1RC 250 140 120 200 Current (mA) Trip current Current (mA) Trip current 100 80 Protective threshold current 60 150 Protective threshold current 100 40 Hold current Hold current 50 20 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 0 -20 70 -10 0 PRG15BC3R3MM1RC 50 60 70 60 70 PRG15BC2R2MM1RC 350 300 300 250 Trip current 150 Trip current 250 200 Current (mA) Current (mA) 10 20 30 40 Ambient Temperature (C) Protective threshold current 200 Protective threshold current 150 100 100 Hold current Hold current 50 50 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 0 -20 70 -10 0 PRG18BB471MB1RB 10 20 30 40 Ambient Temperature (C) 50 PRG18BB221MB1RB 60 40 Current (mA) Current (mA) 30 Trip current 20 40 Trip current Protective threshold current Protective threshold current 20 10 Hold current 0 -10 0 10 Hold current 20 30 40 50 0 -10 60 0 Ambient Temperature (C) 10 20 30 40 50 60 50 60 Ambient Temperature (C) PRG18BB101MB1RB PRG18BB470MB1RB 100 80 80 Trip current Current (mA) Current (mA) 60 Trip current 40 Protective threshold current 60 Protective threshold current 40 Hold current 20 20 Hold current 0 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 0 -10 0 10 20 30 40 Ambient Temperature (C) Continued on the following page. 15 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range PRG18BB330MB1RB PRG18/21BC6R8M Type 350 100 Trip current Trip current 300 80 60 Current (mA) Current (mA) 250 Protective threshold current 40 200 Protective threshold current 150 Hold current 100 20 Hold current 50 0 -10 0 10 20 30 40 50 60 0 -10 0 Ambient Temperature (C) 10 20 30 40 50 60 Ambient Temperature (C) PRG18/21BC4R7M Type PRG18/21BC3R3M Type 450 700 Trip current 400 600 Current (mA) 350 Current (mA) 300 250 Protective threshold current 200 150 Trip current 500 400 300 Protective threshold current 200 100 Hold current 100 Hold current 50 0 -10 0 -10 0 10 20 30 40 50 0 10 60 20 30 40 50 60 Ambient Temperature (C) Ambient Temperature (C) PRG18/21BC2R2M Type PRG18/21BC1R0M Type 1200 700 600 1000 Trip current 500 Current (mA) Current (mA) Trip current 400 Protective threshold current 300 800 600 Protective threshold current 400 200 Hold current 0 -10 0 10 Hold current 200 100 20 30 40 50 0 -10 60 0 Ambient Temperature (C) 160 140 140 30 120 Trip current Current (mA) 100 80 Protective threshold current range 60 40 40 50 60 Trip current 100 Protective threshold current range 80 60 40 Hold current Hold current 20 0 -10 20 PRG21BB150MB1RK 160 120 10 Ambient Temperature (C) PRG21BB220MB1RK Current (mA) 1 20 0 10 20 30 40 Ambient Temperature (C) 50 60 0 -10 0 10 20 30 40 50 60 Ambient Temperature (C) Continued on the following page. 16 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range PRG21BC0R6MM1RA 3.0 1200 Trip current 1000 2.5 800 Trip current 2.0 Current (A) Current (mA) 1 PRG21BC0R2MM1RA Protective threshold current 600 1.5 Protective threshold current 400 1.0 Hold current 200 0.5 0 -10 0 10 20 30 40 50 60 Hold current 0.0 -10 Ambient Temperature (C) 0 10 20 30 40 50 60 Ambient Temperature (C) c Operating Time (Typical Curve) PRG15BC330MM1RC PRG15BC220MM1RC 1 1 -10C Ambient +25C Temp. +60C Operating Time (sec.) Operating Time (sec.) -10C Ambient +25C Temp. +60C 0.1 0.01 0.001 10 100 Overcurrent (mA) 0.1 0.01 0.001 1000 10 PRG15BC180MM1RC 100 Overcurrent (mA) 1000 PRG15BC4R7MM1RC 1 1 Operating Time (sec.) Operating Time (sec.) -10C Ambient +25C Temp. +60C 0.1 0.1 -10C Ambient +25C Temp. +60C 0.01 0.01 0.001 0.001 10 100 Overcurrent (mA) 0.0001 100 1000 PRG15BC3R3MM1RC Operating Time (sec.) Operating Time (sec.) 1 -10C Ambient +25C Temp. +60C 0.01 0.001 0.0001 100 10000 PRG15BC2R2MM1RC 1 0.1 1000 Current (mA) 0.1 -10C Ambient +25C Temp. +60C 0.01 0.001 1000 Current (mA) 10000 0.0001 100 1000 Overcurrent (mA) 10000 Continued on the following page. 17 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time (Typical Curve) PRG18BB471MB1RB PRG18BB221MB1RB 20 20 15 15 W25C Y10C Operating Time (sec.) Operating Time (sec.) Y10C Ambient Temp. W60C 10 5 W25C 10 0 0 20 40 60 80 100 0 20 40 Overcurrent (mA) 80 100 PRG18BB470MB1RB 20 20 15 15 Operating Time (sec.) Y10C W25C 60 Overcurrent (mA) PRG18BB101MB1RB Operating Time (sec.) Ambient Temp. W60C 5 0 Ambient Temp. W60C 10 Y10C W25C Ambient Temp. W60C 10 5 5 0 0 0 100 200 300 0 100 Overcurrent (mA) 200 300 Overcurrent (mA) PRG18BB330MB1RB PRG18BC6R8MM1RB 10.0 20 8.0 15 -10C +25C Ambient Temp. Operating Time (sec.) +60C Operating Time (sec.) 1 Y10C W25C Ambient Temp. W60C 10 6.0 4.0 5 2.0 0.0 0 0 100 200 300 Overcurrent (mA) 400 500 0 200 400 600 800 1000 Overcurrent (mA) Continued on the following page. 18 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time (Typical Curve) PRG18BC4R7MM1RB 10.0 10.0 8.0 8.0 -10C -10C +25C +25C Ambient Temp. 6.0 4.0 2.0 6.0 4.0 2.0 0.0 0.0 0 200 400 600 800 1000 0 500 Overcurrent (mA) 1000 1500 Overcurrent (mA) PRG18BC2R2MM1RB PRG18BC1R0MM1RB 10.0 10.0 8.0 8.0 -10C -10C +25C +25C Ambient Temp. Ambient Temp. +60C Operating Time (sec.) +60C Operating Time (sec.) Ambient Temp. +60C Operating Time (sec.) Operating Time (sec.) +60C 6.0 4.0 2.0 6.0 4.0 2.0 0.0 0.0 0 500 1000 1500 0 500 Overcurrent (mA) 1000 1500 2000 2500 3000 Overcurrent (mA) PRG21BB220MB1RK PRG21BB150MB1RK 20 20 15 15 Y10C Y10C W25C Ambient Temp. Operating Time (sec.) Operating Time (sec.) 1 PRG18BC3R3MM1RB W60C 10 5 W25C Ambient Temp. W60C 10 5 0 0 0 100 200 300 Overcurrent (mA) 400 500 0 100 200 300 400 500 Overcurrent (mA) Continued on the following page. 19 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time (Typical Curve) PRG21BC6R8MM1RA PRG21BC4R7MM1RA 10 10 8 8 Y10C Operating Time (sec.) Operating Time (sec.) W25C 6 Y10C W25C Ambient Temp. W60C 4 2 4 0 0 200 400 600 800 1000 0 200 400 Overcurrent (mA) 600 800 1000 Overcurrent (mA) PRG21BC3R3MM1RA PRG21BC2R2MM1RA 10.0 10.0 8.0 8.0 -10C -10C +25C +25C Ambient Temp. Ambient Temp. +60C Operating Time (sec.) +60C Operating Time (sec.) Ambient Temp. W60C 6 2 0 6.0 4.0 2.0 6.0 4.0 2.0 0.0 0.0 0 500 1000 1500 0 500 Overcurrent (mA) 1000 1500 Overcurrent (mA) PRG21BC1R0MM1RA PRG21BC0R6MM1RA 10.0 10.0 8.0 8.0 -10C -10C +25C +25C Ambient Temp. Ambient Temp. +60C Operating Time (sec.) +60C Operating Time (sec.) 1 6.0 4.0 2.0 6.0 4.0 2.0 0.0 0.0 0 500 1000 1500 2000 Overcurrent (mA) 2500 3000 0 500 1000 1500 2000 2500 3000 Overcurrent (mA) Continued on the following page. 20 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R90E.pdf Mar.4,2014 Continued from the preceding page. c Operating Time (Typical Curve) 1 PRG21BC0R2MM1RA 1.0 0.9 0.8 Operating Time (sec.) 0.7 Y10C 0.6 W25C Ambient Temp. W60C 0.5 0.4 0.3 0.2 0.1 0.0 0 1 2 3 4 5 6 7 8 9 10 Overcurrent (A) 21 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Mar.4,2014 Chip Type Specifications and Test Methods c PRG15 Series No. 1 2 3 Item Operating Temp. Range Resistance Value at 25C Withstanding Voltage Rating Value TO # Method of Examination 4EMPERATURE RANGE THAT PERMIT TO APPLY MAX VOLTAGE TO THE 0OSISTORr. 7ITHIN THE SPECIFIED RANGE It is measured by below flow. !PPLIED MAX VOLTAGE FOR MIN 3TORAGE HRS IN ROOM TEMPERATURE 3) Measured by four-terminal method with less than 1mA (DC0.1V). Without damage 4HE VOLTAGE WHICH RISES GRADUALLY TO OF THE MAX VOLTAGE APPLIES TO THE 0OSISTORr FOR SEC AT # ! PROTECTIVE RESISTOR IS TO BE CONNECTED IN SERIES AND THE INRUSH CURRENT THROUGH 0OSISTORr MUST BE LIMITED BELOW MAX rated value.) 4 Vibration s 2ESISTANCE 2 CHANGE ,ESS THAN s !PPEARANCE .O DEFECTS OR ABNORMALITIES 2EFERENCE STANDARD )%# s 3OLDERED 04# TO 0#" s &REQUENCY RANGE TO (Z s !MPLITUDE MM s 3WEEP RATE OCTAVEMIN s $IRECTION 8 9 : DIRECTION s CYCLES IN EACH AXIS 5 Solderability Wetting of soldering area: U 2EFERENCE STANDARD )%# s 3OLDER 3N !G #U s 3OLDER TEMP # s )MMERSION TIME S 6 Resistance to Soldering Heat 2EFERENCE STANDARD )%# [Reflow method] s 3OLDER 3N !G #U s 0REHEAT TO # S s 0EAK TEMP # s 3OLDERING TIME # TO S s 2EFLOW CYCLE TIME s 4EST BOARD 'RASS %POXY TEST BOARD &2 WITH OUR STANDARD land size *2 7 High Temperature Storage 2EFERENCE STANDARD )%# s 3OLDERED 04# TO 0#" s # s HRS Low Temperature Storage 2EFERENCE STANDARD )%# s 3OLDERED 04# TO 0#" s # s HRS 8 9 Damp Heat, Steady State 10 Thermal Shock *3 s 2ESISTANCE 2 CHANGE ,ESS THAN s !PPEARANCE .O DEFECTS OR ABNORMALITIES 2EFERENCE STANDARD )%# s 3OLDERED 04# TO 0#" s # 2( s HRS 2EFERENCE STANDARD )%# [Test Na] s 3OLDERED 04# TO 0#" s 4RANSPORT TIME SEC s 4EST CONDITION 3EE BELOW TABLE Step 1 2 Condition (C) -203 Time (min.) 30 30 s 4EST CYCLE CYCLES 11 High Temperature Load 2EFERENCE STANDARD )%# s 3OLDERED 04# TO 0#" s # s !PPLIED MAX VOLTAGE s HRS *1: The resistance value after the test is measured by 4-terminal method with less than 10mA (DC0.1V), after storage in 252C for 2 hrs. *2: Above mentioned soldering is done following condition at our side. s 'LASS %POXY 0# BOARD s 3TANDARD LAND DIMENSION s 3TANDARD SOLDER PASTE s 3TANDARD SOLDER PROFILE Above conditions are mentioned in Notice. 7E CANNOT GUARANTEE THE RESISTANCE CHANGE IN 4HERMAL 3HOCK IN CASE OF DEFECTIVE MOUNTING (Note) .O (IGH 4EMPERATURE ,OAD IS BASED ON 'LASS %POXY 0# BOARD WHICH THERMAL DISSIPATION COEFFICIENT OF A MOUNTING STATE IS M7 # )N OTHER CONDITION OF M7 # (IGH 4EMPERATURE ,OAD CHARACTERISTICS MAY CHANGE 22 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Chip Type Specifications and Test Methods c PRG18/21BB Series No. Item Rating Value Metheod of Examination 1 Operating Temp. -10 to 60C Temperature range with maximum voltage applied to PTC. 2 Resistance Value at 25C Within the specified range After applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) 3 Withstanding Voltage Without damage We apply 120% of the maximum operating voltage to PTC by raising gradually for 1805 secs. at 25C. (A protective resistor is to be connected in series, and the inrush current through PTC must be limited below maximum rated value.) There is no sign of exfoliation on electrode. Reference standard: IEC 60068-2-21 (2006) * Soldered PTC to PCB (**) * Force: 5.0N * Test time: 10 sec. 4 Adhesive Strength 5 Vibration * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-6 (2007) * Soldered PTC to PCB (**) * Frequency range: 10 to 55Hz * Amplitude: 1.5mm * Sweep rate: 1 octave/min. * Direction: X-Y-Z (3 direction) * 24 cycles in each axis 6 Solderability Wetting of soldering area: U75% Reference standard: IEC 60068-2-58 (2004) * Solder: Sn-3.0Ag-0.5Cu * Solder temp.: 2455C * Immersion time: 30.3s * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-58 (2004) [Reflow method] * Solder: Sn-3.0Ag-0.5Cu * Preheat: +150 to +180C, 120+/-5s * Peak temp: 260+/-5C * Soldering time: U220C, 60 to 90s * Reflow cycle: 1 time * Test board: Grass-Epoxy test board (FR-4) with our standard land size 7 Resistance to Soldering Heat 8 High Temperature Storage Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +602C * 1000+48/-0 hrs. Low Temperature Storage Reference standard: IEC 60068-2-1 (2007) * Soldered PTC to PCB (**) * -103C * 1000+48/-0 hrs 9 Reference standard: IEC 60068-2-67 (1995) * Soldered PTC to PCB (**) * +402C, 905%RH * 500+24/-0 hrs 10 Damp Heat, Steady State * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) 11 Thermal Shock Reference standard: IEC 60068-2-14 (2009) [ Test Na ] * Soldered PTC to PCB (**) * Transport time: <10 sec. * Test condition: See below table Step 1 2 Condition -203C +852C Time 30min. 30min. * Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +602C * Applied voltage: See below table 12 High Temperature Load Step 1 2 Voltage Max. voltage OFF Time 1.5hrs. 0.5hrs. * 500+24/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 252C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. * Glass-Epoxy PC board * Standard solder paste * Standard land dimension * Standard solder profile Above conditions are mentioned in Notice. 23 1 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Mar.4,2014 Chip Type Specifications and Test Methods c PRG18/21BC Series No. Item Rating Value Metheod of Examination 1 Operating Temp. -10 to 60C Temperature range with maximum voltage applied to PTC. 2 Resistance Value at 25C Within the specified range After applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) 3 Withstanding Voltage Without damage We apply 120% of the maximum operating voltage to PTC by raising gradually for 1805 secs. at 25C. (A protective resistor is to be connected in series, and the inrush current through PTC must be limited below maximum rated value.) There is no sign of exfoliation on electrode. Reference standard: IEC 60068-2-21 (2006) * Soldered PTC to PCB (**) * Force: 5.0N * Test time: 10 sec. 4 Adhesive Strength 5 Vibration * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-6 (2007) * Soldered PTC to PCB (**) * Frequency range: 10 to 55Hz * Amplitude: 1.5mm * Sweep rate: 1 octave/min. * Direction: X-Y-Z (3 direction) * 24 cycles in each axis 6 Solderability Wetting of soldering area: U75% Reference standard: IEC 60068-2-58 (2004) * Solder: Sn-3.0Ag-0.5Cu * Solder temp.: 2455C * Immersion time: 30.3s * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-58 (2004) [Reflow method] * Solder: Sn-3.0Ag-0.5Cu * Preheat: +150 to +180C, 120+/-5s * Peak temp: 260+/-5C * Soldering time: U220C, 60 to 90s * Reflow cycle: 1 time * Test board: Grass-Epoxy test board (FR-4) with our standard land size 7 Resistance to Soldering Heat 8 High Temperature Storage Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +602C * 1000+48/-0 hrs. Low Temperature Storage Reference standard: IEC 60068-2-1 (2007) * Soldered PTC to PCB (**) * -103C * 1000+48/-0 hrs 9 Reference standard: IEC 60068-2-67 (1995) * Soldered PTC to PCB (**) * +602C, 905%RH * 500+24/-0 hrs 10 Damp Heat, Steady State * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) 11 Thermal Shock Reference standard: IEC 60068-2-14 (2009) [ Test Na ] * Soldered PTC to PCB (**) * Transport time: <10 sec. * Test condition: See below table Step 1 2 Condition -203C +852C Time 30min. 30min. * Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +602C * Applied voltage: See below table 12 High Temperature Load Step 1 2 Voltage Max. voltage OFF Time 1.5hrs. 0.5hrs. * 500+24/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 252C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. * Glass-Epoxy PC board * Standard solder paste * Standard land dimension * Standard solder profile Above conditions are mentioned in Notice. 24 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection Narrow Current Band 30V Series 2 D max. T max. H max. This product is a leaded type PTC thermistor for overcurrent protection which is suitable for a current limiting resistor. c Features 4.01.5 1. Small fluctuation in the circuit due to resistance tolerance +/-10% 2. Narrow current range (less than twice) between operating and non-operating current at -10 to 60 degrees C. 3. Quick operating time due to small size compared with conventional products. 4. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 5. Circuit is protected until current is turned off. 6. Restores the original low resistance value automatically once the overload is removed. 7. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. od0.05 F1.5 (in mm) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (mm) (F) (mm) (phi d) (mm) Part Number PTGL04AS100K2N51B0 30 122 154 205 240 1.5 10 10% 4.5 3.5 9.5 5.0 0.5 PTGL04AS100K2B51B0 30 167 212 282 330 2.0 10 10% 4.5 3.5 9.5 5.0 0.6 PTGL05AS3R9K2B51B0 30 269 340 452 530 3.5 3.9 10% 5.5 3.5 10.5 5.0 0.6 PTGL07AS2R7K2B51B0 30 336 425 565 663 4.5 2.7 10% 7.3 3.5 12.3 5.0 0.6 PTGL07AS1R8K2B51B0 30 420 532 708 829 5.0 1.8 10% 7.3 3.5 12.3 5.0 0.6 PTGL09AS1R2K2B51B0 30 556 704 936 1097 6.0 1.2 10% 9.3 3.5 14.3 5.0 0.6 PTGL12AS0R8K2B51B0 30 685 867 1153 1352 7.0 0.8 10% 11.5 3.5 16.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 30V Series is recognized by UL. Taping type is also available. Please refer to the page of "Package" information for details. c Protective Threshold Current Range PTGL04AS100K2N51B0 PTGL04AS100K2B51B0 280 400 Trip current 240 Trip current 300 Protective threshold current 160 Current (mA) Current (mA) 200 Hold current 120 80 Protective threshold current 200 Hold current 100 40 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 80 Continued on the following page. 25 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range PTGL05AS3R9K2B51B0 PTGL07AS2R7K2B51B0 700 600 Trip current Trip current 2 600 Protective threshold current 500 Protective threshold current 400 Current (mA) Current (mA) 500 300 Hold current 400 Hold current 300 200 200 100 100 0 -20 0 20 40 Ambient Temperature (C) 60 0 80 -20 PTGL07AS1R8K2B51B0 0 20 40 Ambient Temperature (C) 60 80 PTGL09AS1R2K2B51B0 1000 1200 Trip current Trip current 1000 Protective threshold current 600 Current (mA) Current (mA) 800 400 Protective threshold current 800 600 Hold current Hold current 400 200 200 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 80 PTGL12AS0R8K2B51B0 1600 Trip current Current (mA) 1200 Protective threshold current 800 Hold current 400 0 -20 0 20 40 Ambient Temperature (C) 60 80 c Operating Time (Typical Curve) PTGL04AS100K2N51B0 PTGL04AS100K2B51B0 100 10 Operating Time (sec.) Operating Time (sec.) 100 - 30C - 10C 25C Ambient Temp. 60C 85C 1 - 30C - 10C 25C Ambient Temp. 60C 85C 1 0.1 0.1 0.01 0.1 10 1 Overcurrent (A) 10 0.01 0.1 1 Overcurrent (A) 10 Continued on the following page. 26 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time (Typical Curve) PTGL05AS3R9K2B51B0 PTGL07AS2R7K2B51B0 10 100 - 30C - 10C 25C Ambient Temp. 60C 85C 1 Operating Time (sec.) Operating Time (sec.) 100 0.1 0.01 0.1 10 2 1 0.1 1 Overcurrent (A) 10 0.01 0.1 PTGL07AS1R8K2B51B0 1 Overcurrent (A) 10 PTGL09AS1R2K2B51B0 100 10 1 Operating Time (sec.) 100 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) - 30C - 10C 25C Ambient Temp. 60C 85C - 30C - 10C 25C Ambient Temp. 60C 85C 10 1 0.1 0.1 1 Overcurrent (A) 10 0.1 0.1 1 Overcurrent (A) 10 PTGL12AS0R8K2B51B0 100 Operating Time (sec.) - 30C - 10C 25C Ambient Temp. 60C 85C 10 1 0.1 0.1 1 Overcurrent (A) 10 27 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection Narrow Current Band 51/60V Series D max. H max. T max. c Features 1. Small fluctuation in the circuit due to resistance tolerance +/-10% 2. Narrow current range (less than twice) between operating and non-operating current at -10 to 60 degrees C. 3. Quick operating time due to small size compared with conventional products. 4. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 5. Circuit is protected until current is turned off. 6. Restores the original low resistance value automatically once the overload is removed. 7. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Part Number 4.01.5 3 This product is a leaded type PTC thermistor for overcurrent protection which is suitable for a current limiting resistor. od0.05 F1.5 (in mm) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (mm) (F) (mm) (phi d) (mm) PTGL04AS100K3B51B0 51 168 213 283 332 1.0 10 10% 4.5 3.5 9.5 5.0 0.6 PTGL05AS6R8K3B51B0 51 197 249 331 388 1.5 6.8 10% 5.5 3.5 10.5 5.0 0.6 PTGL07AS3R3K3B51B0 51 307 389 517 606 3.0 3.3 10% 7.3 3.5 12.3 5.0 0.6 PTGL09AS2R2K3B51B0 51 412 522 694 814 4.0 2.2 10% 9.3 3.5 14.3 5.0 0.6 PTGL12AS1R2K3B51B0 51 592 749 996 1168 5.0 1.2 10% 11.5 3.5 16.5 5.0 0.6 PTGL04AS220K4N51B0 60 88 112 149 175 1.0 22 10% 4.5 3.5 9.5 5.0 0.5 PTGL04AS220K4B51B0 60 115 145 193 226 1.0 22 10% 4.5 3.5 9.5 5.0 0.6 PTGL05AS100K4B51B0 60 170 215 286 335 1.5 10 10% 5.5 3.5 10.5 5.0 0.6 PTGL07AS5R6K4N51B0 60 186 236 314 368 2.2 5.6 10% 7.3 3.5 12.3 5.0 0.5 PTGL07AS5R6K4B51B0 60 229 290 386 452 3.0 5.6 10% 7.3 3.5 12.3 5.0 0.6 PTGL09AS3R3K4B51B0 60 333 421 560 656 4.0 3.3 10% 9.3 3.5 14.3 5.0 0.6 PTGL12AS2R2K4B51B0 60 439 556 739 867 5.0 2.2 10% 11.5 3.5 16.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 51/60V Series are recognized by UL. Taping type is also available. Please refer to the page of "Package" information for details. 28 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Protective Threshold Current Range (51V Series) PTGL04AS100K3B51B0 PTGL05AS6R8K3B51B0 400 400 Trip current Trip current 300 Protective threshold current Current (mA) Current (mA) 300 200 Protective threshold current 200 Hold current 3 Hold current 100 0 100 -20 0 20 40 Ambient Temperature (C) 60 0 80 -20 PTGL07AS3R3K3B51B0 0 20 40 Ambient Temperature (C) 60 80 PTGL09AS2R2K3B51B0 1000 700 Trip current 600 Trip current 800 Protective threshold current Current (mA) Current (mA) 500 400 300 Hold current Protective threshold current 600 400 Hold current 200 200 100 0 -20 0 20 40 Ambient Temperature (C) 60 0 80 -20 0 20 40 Ambient Temperature (C) 60 80 PTGL12AS1R2K3B51B0 1400 1200 Trip current Current (mA) 1000 Protective threshold current 800 600 Hold current 400 200 0 -20 0 20 40 Ambient Temperature (C) 60 80 c Protective Threshold Current Range (60V Series) PTGL04AS220K4N51B0 PTGL04AS220K4B51B0 200 240 Trip current Trip current 200 Protective threshold current 120 80 Current (mA) Current (mA) 160 Protective threshold current 160 120 Hold current Hold current 80 40 40 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 80 Continued on the following page. 29 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (60V Series) PTGL05AS100K4B51B0 PTGL07AS5R6K4N51B0 400 400 Trip current Trip current 3 300 Protective threshold current Current (mA) Current (mA) 300 200 Protective threshold current 200 Hold current Hold current 100 100 0 0 -20 0 20 40 Ambient Temperature (C) 60 -20 80 PTGL07AS5R6K4B51B0 0 20 40 Ambient Temperature (C) 60 80 PTGL09AS3R3K4B51B0 700 500 Trip current Trip current 600 500 Protective threshold current 300 200 Current (mA) Current (mA) 400 Protective threshold current 400 300 Hold current Hold current 200 100 100 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 80 PTGL12AS2R2K4B51B0 1000 Trip current Current (mA) 800 Protective threshold current 600 400 Hold current 200 0 -20 0 20 40 Ambient Temperature (C) 60 80 c Operating Time 51V Series (Typical Curve) PTGL04AS100K3B51B0 PTGL05AS6R8K3B51B0 100 10 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) Operating Time (sec.) 100 1 1 0.1 0.1 10 - 30C - 10C 25C Ambient Temp. 60C 85C 1 Overcurrent (A) 10 0.1 0.1 1 Overcurrent (A) 10 Continued on the following page. 30 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 51V Series (Typical Curve) PTGL07AS3R3K3B51B0 PTGL09AS2R2K3B51B0 10 100 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) Operating Time (sec.) 100 1 0.1 0.1 - 30C - 10C 25C Ambient Temp. 60C 85C 10 3 1 1 Overcurrent (A) 0.1 10 0.1 1 Overcurrent (A) 10 PTGL12AS1R2K3B51B0 Operating Time (sec.) 100 - 30C - 10C 25C Ambient Temp. 60C 85C 10 1 0.1 0.1 1 Overcurrent (A) 10 c Operating Time 60V Series (Typical Curve) PTGL04AS220K4N51B0 PTGL04AS220K4B51B0 Operating Time (sec.) - 30C - 10C 25C Ambient Temp. 60C 85C 10 1 Operating Time (sec.) 100 100 1 0.1 Overcurrent (A) 1 0.01 0.1 PTGL05AS100K4B51B0 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) Operating Time (sec.) 10 100 1 0.1 0.1 1 Overcurrent (A) PTGL07AS5R6K4N51B0 100 10 - 30C - 10C 25C Ambient Temp. 60C 85C 0.1 0.1 0.01 0.01 10 10 - 30C - 10C 25C Ambient Temp. 60C 85C 1 1 Overcurrent (A) 10 0.1 0.1 1 Overcurrent (A) 10 Continued on the following page. 31 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 60V Series (Typical Curve) PTGL07AS5R6K4B51B0 PTGL09AS3R3K4B51B0 100 3 10 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) Operating Time (sec.) 100 1 Overcurrent (A) 10 PTGL12AS2R2K4B51B0 Operating Time (sec.) 100 - 30C - 10C 25C Ambient Temp. 60C 85C 10 1 0.1 0.1 32 - 30C - 10C 25C Ambient Temp. 60C 85C 1 1 0.1 0.1 10 1 Overcurrent (A) 10 0.1 0.1 1 Overcurrent (A) 10 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection Narrow Current Band 140V Series D max. T max. H max. This product is a leaded type PTC thermistor for overcurrent protection which is suitable for a current limiting resistor. c Features 4 4.01.5 1. Small fluctuation in the circuit due to resistance tolerance +/-10% 2. Narrow current range (less than twice) between operating and non-operating current at -10 to 60 degrees C. 3. Quick operating time due to small size compared with conventional products. 4. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 5. Circuit is protected until current is turned off. 6. Restores the original low resistance value automatically once the overload is removed. 7. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. od0.05 F1.5 (in mm) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (mm) (F) (mm) (phi d) (mm) Part Number PTGL04AS560K6B51B0 140 74 94 125 147 0.5 56 10% 4.5 4.5 9.5 5.0 0.6 PTGL05AS270K6B51B0 140 106 134 178 209 1.0 27 10% 5.5 4.5 10.5 5.0 0.6 PTGL07AS150K6B51B0 140 148 187 249 292 1.5 15 10% 7.3 4.5 12.3 5.0 0.6 PTGL09AS120K6B51B0 140 192 244 324 380 2.0 12 10% 9.3 4.5 14.3 5.0 0.6 PTGL09AS7R6K6B51B0 140 227 287 382 447 2.2 7.6 10% 9.3 4.5 14.3 5.0 0.6 PTGL12AS4R7K6B51B0 140 310 393 523 613 3.5 4.7 10% 11.5 4.5 16.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 140V Series is recognized by UL. Taping type is also available. Please refer to the page of "Package" information for details. c Protective Threshold Current Range PTGL04AS560K6B51B0 PTGL05AS270K6B51B0 240 160 Trip current 200 Trip current 160 Current (mA) Current (mA) 120 Protective threshold current 80 Hold current Protective threshold current 120 Hold current 80 40 40 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 80 Continued on the following page. 33 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range PTGL07AS150K6B51B0 400 300 Trip current Trip current 300 Protective threshold current 200 Current (mA) Current (mA) PTGL09AS120K6B51B0 Protective threshold current 200 Hold current Hold current 100 100 0 4 -20 0 20 40 Ambient Temperature (C) 60 0 80 -20 PTGL09AS7R6K6B51B0 0 20 40 Ambient Temperature (C) 60 80 PTGL12AS4R7K6B51B0 700 500 Trip current 600 Trip current 500 Protective threshold current 300 Current (mA) Current (mA) 400 Protective threshold current 400 300 Hold current 200 Hold current 200 100 100 0 -20 0 20 40 60 80 0 -20 Ambient Temperature (C) 0 20 40 Ambient Temperature (C) 60 80 c Operating Time (Typical Curve) PTGL04AS560K6B51B0 PTGL05AS270K6B51B0 Operating Time (sec.) - 30C - 10C 25C Ambient Temp. 60C 85C 10 Operating Time (sec.) 100 100 1 1 0.1 0.01 10 0.1 Overcurrent (A) 0.1 0.1 1 PTGL07AS150K6B51B0 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) Operating Time (sec.) 10 100 1 0.1 0.1 1 Overcurrent (A) PTGL09AS120K6B51B0 100 10 - 30C - 10C 25C Ambient Temp. 60C 85C 10 - 30C - 10C 25C Ambient Temp. 60C 85C 1 1 Overcurrent (A) 10 0.1 0.1 1 Overcurrent (A) 10 Continued on the following page. 34 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time (Typical Curve) PTGL09AS7R6K6B51B0 PTGL12AS4R7K6B51B0 10 100 - 30C - 10C 25C Ambient Temp. 60C 85C Operating Time (sec.) Operating Time (sec.) 100 1 0.1 0.1 10 - 30C - 10C 25C Ambient Temp. 60C 85C 1 1 Overcurrent (A) 10 0.1 0.1 1 Overcurrent (A) 4 10 35 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection 16V Series D max. T max. 4.01.5 H max. This low-voltage, low-resistance type "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like motor lock or short circuit, will be increased to restrain overcurrent. This "POSISTOR" is most suitable for low-voltage circuits. c Features (in mm) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (mm) (F) (mm) (phi d) (mm) Part Number PTGL05AR1R0M1B51B0 16 370 470 880 1040 2.0 1.0 20% 6.0 3.5 9.5 5.0 0.6 PTGL06AR0R8M1B51B0 16 400 505 955 1120 3.0 0.8 20% 6.5 3.5 10.0 5.0 0.6 PTGL07ARR47M1B51B0 16 560 705 1310 1570 5.0 0.47 20% 7.5 3.5 12.0 5.0 0.6 PTGL09ARR33M1B51B0 16 680 875 1625 1900 7.0 0.33 20% 9.0 3.5 14.0 5.0 0.6 PTGL10ARR27M1B51B0 16 800 1025 1900 2250 8.0 0.27 20% 10.1 3.5 15.0 5.0 0.6 PTGL12AR0R2M1B51B0 16 1000 1300 2410 2800 9.0 0.2 20% 11.3 3.5 16.0 5.0 0.6 PTGL14ARR15M1B51B0 16 1200 1545 2855 3360 10 0.15 20% 13.5 3.5 18.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. Taping type is also available(except PTGL14ARR15M1B51B0). Please refer to the page of "Package" information for details. c Protective Threshold Current Range (16V Series) PTGL05AR1R0M1B51B0 PTGL06AR0R8M1B51B0 1400 1400 1200 1200 1000 1000 Trip current Current (mA) Trip current Current (mA) 5 od0.05 F1.5 1. Best suited to meet the requirements for power supplies and motor protection. Error-free operation is assured by rush current. 2. Circuit is protected until current is turned off. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. 800 Protective threshold current 600 400 800 Protective threshold current 600 400 Hold current Hold current 200 0 -20 200 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 80 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 80 Continued on the following page. 36 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (16V Series) PTGL07ARR47M1B51B0 PTGL09ARR33M1B51B0 2000 2600 1800 2400 2200 1600 2000 Trip current 1200 Protective threshold current 1000 Trip current 1800 Current (mA) Current (mA) 1400 800 1600 1400 Protective threshold current 1200 1000 800 600 Hold current Hold current 600 400 400 200 200 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 0 -20 80 -10 0 PTGL10ARR27M1B51B0 10 20 30 40 Ambient Temperature (C) 50 60 70 80 PTGL12AR0R2M1B51B0 5 4000 3000 2800 3500 2600 2400 2200 3000 Trip current Trip current Current (mA) Current (mA) 2000 1800 1600 Protective threshold current 1400 1200 2500 2000 Protective threshold current 1500 1000 800 1000 Hold current Hold current 600 400 500 200 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 80 70 80 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 70 80 PTGL14ARR15M1B51B0 4000 3500 3000 Current (mA) Trip current 2500 Protective threshold current 2000 1500 1000 Hold current 500 0 -20 -10 0 10 20 30 40 Ambient Temperature (C) 50 60 c Operating Time 16V Series (Typical Curve) PTGL05AR1R0M1B51B0 PTGL06AR0R8M1B51B0 100.0 -10C +25C Ambient +60C Temp. 10.0 Operating Time (sec.) Operating Time (sec.) 100.0 1.0 0.1 0.1 1 10 Overcurrent (A) 100 -10C +25C Ambient +60C Temp. 10.0 1.0 0.1 0.1 1 10 Overcurrent (A) 100 Continued on the following page. 37 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 16V Series (Typical Curve) PTGL07ARR47M1B51B0 PTGL09ARR33M1B51B0 100.0 -10C +25C Ambient +60C Temp. 10.0 Operating Time (sec.) Operating Time (sec.) 100.0 1.0 0.1 0.1 1 10 Overcurrent (A) 10.0 1.0 0.1 0.1 100 PTGL10ARR27M1B51B0 5 Operating Time (sec.) Operating Time (sec.) -10C +25C Ambient +60C Temp. 1.0 1 10 Overcurrent (A) 100 PTGL14ARR15M1B51B0 100.0 Operating Time (sec.) -10C +25C Ambient +60C Temp. 38 10 Overcurrent (A) 100 100.0 10.0 10.0 1.0 0.1 0.1 1 PTGL12AR0R2M1B51B0 100.0 0.1 0.1 -10C +25C Ambient +60C Temp. 1 10 Overcurrent (A) 100 -10C +25C Ambient +60C Temp. 10.0 1.0 0.1 0.1 1 10 Overcurrent (A) 100 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection 24/30/32V Series T max. D max. 6.0 max. The safety resistor "POSISTOR" is most suited to meet the requirements of the safety standard short-circuit tests such as IEC, VDE, BS, UL, CSA, etc., worldwide. c Features 1. Best suited to meet the requirements of the shortcircuit test. Quick response compared with current fuse and resistor and error-free operation are assured. 2. Small size save board space. Capable of being mounted anywhere because replacement is not required. 3. Actuates by excessive current during the shortcircuit test to restrain abnormal heat generation in other circuit components and printed boards. This state will be maintained until the abnormal state is removed or power is turned off to reset the "POSISTOR" to the original state. Surface temperature of "POSISTOR" is kept low, below a certain value, during the actuation. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Part Number 4.01.5 od 0.05 F1.5 (in mm) 6 Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (F) (mm) (phi d) (mm) PTGL07BD100N2B51B0 24 80 124 251 320 2.0 10 30% 7.4 4.0 5.0 0.6 PTGL07BD6R8N2B51B0 24 90 139 296 370 2.0 6.8 30% 7.4 4.0 5.0 0.6 PTGL09BD4R7N2B51B0 24 120 216 398 500 2.0 4.7 30% 9.5 4.0 5.0 0.6 PTGL09BD3R3N2B51B0 24 140 248 461 580 2.0 3.3 30% 9.5 4.0 5.0 0.6 PTGL09BD2R2N2B51B0 24 180 326 431 710 2.0 2.2 30% 9.5 4.0 5.0 0.6 PTGL04AR130H2B51B0 30 145 180 350 400 0.7 13 25% 5.5 4.0 5.0 0.6 PTGL07AR4R6H2B51B0 30 250 340 610 700 2.0 4.6 25% 7.4 4.0 5.0 0.6 PTGL09AR1R8H2B51B0 30 410 510 970 1120 3.0 1.8 25% 9.5 4.0 5.0 0.6 PTGL12AR1R2H2B51B0 30 520 645 1225 1420 4.3 1.2 25% 12.0 4.0 5.0 0.6 PTGL13AR0R8H2B71B0 30 680 870 1600 1900 5.5 0.8 25% 13.5 4.0 7.5 0.6 PTGL07BD470N3B51B0 32 30 55 115 140 1.5 47 30% 7.4 4.0 5.0 0.6 PTGL07BD330N3B51B0 32 40 60 135 170 1.5 33 30% 7.4 4.0 5.0 0.6 PTGL07BD220N3B51B0 32 45 75 160 200 1.5 22 30% 7.4 4.0 5.0 0.6 PTGL07BD150N3B51B0 32 60 100 195 240 1.5 15 30% 7.4 4.0 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 24/30/32V Series are recognized by UL (except PTGL13AR0R8H2B71B0). Only PTGL_51B0 series are available in taping type (except PTGL12AR1R2H2B51B0). Please refer to the page of "Package" information for details. 39 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Protective Threshold Current Range (24V Series) PTGL07BD100N2B51B0 PTGL07BD6R8N2B51B0 600 Current (mA) Current (mA) 600 400 Trip current 400 Trip current Protective threshold current 200 Protective threshold current 200 Hold current 0 -20 0 Hold current 40 20 Ambient Temperature (C) 0 60 -20 PTGL09BD4R7N2B51B0 60 600 Current (mA) Current (mA) 20 40 Ambient Temperature (C) PTGL09BD3R3N2B51B0 600 6 0 Trip current 400 Trip current 400 Protective threshold current Protective threshold current 200 200 Hold current Hold current 0 -20 0 40 20 Ambient Temperature (C) 0 60 -20 0 40 20 Ambient Temperature (C) 60 PTGL09BD2R2N2B51B0 1500 Current (mA) 1000 Trip current 500 Protective threshold current Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 c Protective Threshold Current Range (30V Series) PTGL04AR130H2B51B0 PTGL07AR4R6H2B51B0 600 800 Trip current 600 Trip current Current (mA) Current (mA) 400 Protective threshold current Protective threshold current 400 200 Hold current 200 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 0 -20 0 20 40 Ambient Temperature (C) 60 Continued on the following page. 40 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (30V Series) PTGL09AR1R8H2B51B0 PTGL12AR1R2H2B51B0 1500 1500 Trip current Trip current 1000 Current (mA) Current (mA) 1000 Protective threshold current Protective threshold current 500 500 Hold current 0 -20 0 Hold current 20 40 Ambient Temperature (C) 0 60 -20 0 40 20 Ambient Temperature (C) 60 PTGL13AR0R8H2B71B0 2000 Trip current Current (mA) 1500 6 Protective threshold current 1000 Hold current 500 0 -20 0 20 40 Ambient Temperature (C) 60 c Protective Threshold Current Range (32V Series) PTGL07BD470N3B51B0 PTGL07BD330N3B51B0 300 Current (mA) 200 200 Trip current Trip current Protective threshold current 100 100 Protective threshold current Hold current Hold current 0 0 -20 0 20 40 Ambient Temperature (C) 60 -20 PTGL07BD220N3B51B0 0 20 40 Ambient Temperature (C) 60 PTGL07BD150N3B51B0 300 Current (mA) 300 Current (mA) Current (mA) 300 200 Trip current Trip current 200 Protective threshold current Protective threshold current 100 100 Hold current Hold current 0 -20 0 40 20 Ambient Temperature (C) 60 0 -20 0 40 20 Ambient Temperature (C) 60 41 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Operating Time 24V Series (Typical Curve) PTGL07BD6R8N2B51B0 25 25 20 20 15 Operating Time (sec.) Operating Time (sec.) PTGL07BD100N2B51B0 -10C 25C Ambient Temp. 60C 15 10 10 5 5 0 0 0 6 0.5 1.0 1.5 Overcurrent (A) -10C 25C Ambient Temp. 60C 2.0 0 PTGL09BD4R7N2B51B0 0.5 1.0 1.5 Overcurrent (A) 2.0 PTGL09BD3R3N2B51B0 30 25 -10C 25C Ambient Temp. 60C 25 -10C 25C Ambient Temp. 60C 15 Operating Time (sec.) Operating Time (sec.) 20 20 15 10 10 5 0 5 0 0 0.5 1.0 1.5 Overcurrent (A) 2.0 PTGL09BD2R2N2B51B0 70 60 Operating Time (sec.) 50 -10C 25C Ambient Temp. 60C 40 30 20 10 0 42 0 0.5 1.0 1.5 Overcurrent (A) 2.0 0 0.5 1.0 1.5 Overcurrent (A) 2.0 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Operating Time 30V Series (Typical Curve) PTGL07AR4R6H2B51B0 70 70 60 60 50 50 Operating Time (sec.) Operating Time (sec.) PTGL04AR130H2B51B0 40 -10C 25C 60C 30 Ambient Temp. 40 30 -10C 25C Ambient Temp. 60C 20 20 10 10 0 0 0.2 0.4 Overcurrent (A) 0 0.6 0 0.2 70 70 60 60 50 50 40 30 -10C 25C Ambient Temp. 60C 10 10 1.0 2.0 Overcurrent (A) 6 0 3.0 -10C 25C Ambient Temp. 60C 30 20 0 1.0 40 20 0 0.6 0.8 Overcurrent (A) PTGL12AR1R2H2B51B0 Operating Time (sec.) Operating Time (sec.) PTGL09AR1R8H2B51B0 0.4 0 1.0 2.0 3.0 Overcurrent (A) 4.0 PTGL13AR0R8H2B71B0 70 60 Operating Time (sec.) 50 40 -10C 25C Ambient Temp. 60C 30 20 10 0 0 1.0 2.0 3.0 4.0 Overcurrent (A) 5.0 43 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Operating Time 32V Series (Typical Curve) PTGL07BD330N3B51B0 25 25 20 20 Operating Time (sec.) Operating Time (sec.) PTGL07BD470N3B51B0 15 -10C 25C Ambient Temp. 60C -10C 25C Ambient Temp. 60C 10 10 5 5 0 6 15 0 0 0.5 1.0 Overcurrent (A) 1.5 0 0.5 PTGL07BD220N3B51B0 1.0 Overcurrent (A) 1.5 PTGL07BD150N3B51B0 25 25 20 Operating Time (sec.) Operating Time (sec.) 20 15 -10C 25C Ambient Temp. 60C 10 15 -10C 25C Ambient Temp. 60C 10 5 5 0 0 0 0.5 1.0 Overcurrent (A) 1.5 0 0.5 1.0 Overcurrent (A) 1.5 c Application Circuit (1) Short - Circuit Test of Transistor (2) Short - Circuit Test of Diode PTH PTH R3 R1 Short C + AC 100V - R1 B E Short R4 R2 AC 100V Continued on the following page. 44 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Application Circuit (3) Short - Circuit Test of IC (4) Short - Circuit Test of Electrolytic Capacitor PTH +V0 PTH + IC Short Short - Electrolytic Capacitor AC 100V (5) Lock Test of Motor (6) Transistor Protection Circuit PTH PTH RL RB 6 DC24V M Motor (Lock) RA C RE (7) Transformer Protection Circuit PTH Power Supply 45 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection 56/80V Series D max. T max. 4.01.5 6.0 max. "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "POSISTOR" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. od0.05 F1.5 c Features (in mm) c Applications 1. DC cooling fan motors in office equipment, e.g., computers, facsimiles, floppy disk drives and power units. 2. DC drive motors in VTRs and cassette tape recorders. Power transformers (at secondary winding) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (F) (mm) (phi d) (mm) Part Number PTGL07AR220M3P51B0 56 90 115 205 240 1.0 22 20% 7.4 4.0 5.0 0.6 PTGL07AR8R2M3P51B0 56 130 165 300 350 1.0 8.2 20% 7.4 4.0 5.0 0.6 PTGL09AR150M3B51B0 56 150 190 340 400 1.2 15 20% 9.5 4.0 5.0 0.6 PTGL10AR3R9M3P51B0 56 210 260 470 550 2.0 3.9 20% 10.5 4.0 5.0 0.6 PTGL09AR4R7M3B51B0 56 270 350 600 700 2.0 4.7 20% 9.5 4.0 5.0 0.6 PTGL10AR3R9M3B51B0 56 300 390 680 800 2.0 3.9 20% 10.5 4.0 5.0 0.6 PTGL14AR3R3M3B71B0 56 380 490 830 980 2.5 3.3 20% 14.5 4.0 7.5 0.6 PTGL05AR550H4P51B0 80 50 62 115 135 0.7 55 25% 5.5 4.5 5.0 0.6 PTGL07AR250H4B51B0 80 110 140 260 300 1.0 25 25% 7.4 4.5 5.0 0.6 PTGL09AR9R4H4B51B0 80 190 240 450 530 3.0 9.4 25% 9.5 4.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. Please contact us for UL recognized products. Only PTGL_51B0 type is available in taping type. Please refer to the page of "Package" information for details. c Protective Threshold Current Range (56V Series) PTGL07AR220M3P51B0 PTGL07AR8R2M3P51B0 300 500 400 Trip current 200 Trip current Current (mA) Current (mA) 7 1. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 2. Circuit is protected until current is turned off. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Protective threshold current 300 Protective threshold current 200 100 Hold current Hold current 100 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 80 Continued on the following page. 46 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (56V Series) PTGL09AR150M3B51B0 PTGL10AR3R9M3P51B0 800 500 400 600 Trip current Current (mA) Current (mA) Trip current 300 Protective threshold current 200 Hold current 400 Protective threshold current 200 100 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 0 -20 80 0 PTGL09AR4R7M3B51B0 60 80 PTGL10AR3R9M3B51B0 1000 800 800 Trip current 600 Trip current Current (mA) Current (mA) 20 40 Ambient Temperature (C) Protective threshold current 400 600 Protective threshold current 400 Hold current 7 Hold current 200 200 0 -20 0 20 40 Ambient Temperature (C) 60 0 -20 80 0 20 40 Ambient Temperature (C) 60 80 PTGL14AR3R3M3B71B0 1500 1000 Current (mA) Trip current Protective threshold current 500 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 80 c Protective Threshold Current Range (80V Series) PTGL05AR550H4P51B0 PTGL07AR250H4B51B0 150 400 Trip current Trip current 100 Current (mA) Current (mA) 300 Protective threshold current 200 Protective threshold current 50 100 Hold current Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 0 -20 0 20 40 Ambient Temperature (C) 60 Continued on the following page. 47 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (80V Series) PTGL09AR9R4H4B51B0 800 600 Current (mA) Trip current 400 Protective threshold current 200 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 c Operating Time 56V Series (Typical Curve) PTGL07AR220M3P51B0 PTGL07AR8R2M3P51B0 50 70 60 40 7 -10C 25C Ambient Temp. 60C Operating Time (sec.) Operating Time (sec.) 50 40 30 30 -10C 25C Ambient Temp. 60C 20 20 10 10 0 0 0.2 0.4 0.6 Overcurrent (A) 0 0.8 0 PTGL09AR150M3B51B0 0.5 1.0 Overcurrent (A) 1.5 2.0 PTGL10AR3R9M3P51B0 25 70 -10C 25C 60C Ambient Temp. 60 20 Operating Time (sec.) Operating Time (sec.) 50 40 30 15 -10C 25C Ambient Temp. 60C 10 20 5 10 0 0 0.2 0.4 0.6 Overcurrent (A) 0.8 0 0 1 2 Overcurrent (A) 3 4 Continued on the following page. 48 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 56V Series (Typical Curve) PTGL10AR3R9M3B51B0 25 25 20 20 Operating Time (sec.) Operating Time (sec.) PTGL09AR4R7M3B51B0 15 -10C 25C Ambient Temp. 60C 10 15 -10C 25C Ambient Temp. 60C 10 5 0 5 0 1 2 Overcurrent (A) 3 0 4 0 1 2 Overcurrent (A) 3 4 PTGL14AR3R3M3B71B0 40 7 Operating Time (sec.) 30 -10C 25C 60C Ambient Temp. 20 10 0 0 1 2 3 Overcurrent (A) 4 c Operating Time 80V Series (Typical Curve) PTGL07AR250H4B51B0 70 70 60 60 50 50 40 30 -10C Ambient Temp. 25C 60C Operating Time (sec.) Operating Time (sec.) PTGL05AR550H4P51B0 40 20 20 10 10 0 0 0 0.2 0.4 Overcurrent (A) 0.6 -10C 25C Ambient Temp. 60C 30 0 0.2 0.4 0.6 0.8 Overcurrent (A) 1.0 Continued on the following page. 49 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 80V Series (Typical Curve) PTGL09AR9R4H4B51B0 70 60 Operating Time (sec.) 50 40 30 -10C 25C Ambient Temp. 60C 20 10 0 0 1.0 2.0 Overcurrent (A) 3.0 c Application Circuit (1) DC Motor Protection Circuit (2) Transistor Protection Circuit PTH 7 PTH RL RB M Power Supply Motor RA C (3) Transformer Protection Circuit PTH Power Supply 50 RE R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection 125/140V Series D max. T max. c Features 125V Series F1.5 1. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 2. Circuit is protected until current is turned off. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. 4.01.5 6.0 max. "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "POSISTOR" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. od0.05 (in mm) T max. 6.0 max. D max. c Applications Circuit Protection : 1. Transformers 2. Transistors 3. Fluorescent Lamps Part Number od 0.05 4.01.5 140V Series F1.5 (in mm) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (F) (mm) (phi d) (mm) PTGL05AR181M7P52B0 125 30 38 64 75 0.3 180 20% 6.0 5.0 5.0 0.6 PTGL09AR220M6B52B0 125 135 175 290 340 0.8 22 20% 10.0 5.5 5.0 0.6 PTGL14AR100M6B72B0 125 220 280 475 550 1.2 10 20% 15.0 5.5 7.5 0.6 PTGL07AR330M6A51B0 140 100 130 200 230 0.5 33 20% 7.4 6.0 5.0 0.5 PTGL09AR220M6C61B0 140 140 180 280 330 1.0 22 20% 9.6 6.0 6.5 0.65 PTGL10AR150M6C61B0 140 170 220 345 400 1.0 15 20% 11.6 6.0 6.5 0.65 PTGL12AR100M6C01B0 140 220 290 440 510 1.0 10 20% 13.0 6.0 10.0 0.65 PTGL13AR6R8M6C01B0 140 290 370 575 670 1.0 6.8 20% 14.0 6.0 10.0 0.65 PTGL16AR5R6M6C01B0 140 340 440 670 780 2.0 5.6 20% 17.0 6.0 10.0 0.65 Maximum Current shows typical capacities of the transformer which can be used. Please contact us for UL recognized products. Only PTGL_52B0 type is available in taping type. Please refer to the page of "Package" information for details. 51 8 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Protective Threshold Current Range (125V Series) PTGL05AR181M7P52B0 PTGL09AR220M6B52B0 100 500 80 400 Trip current Current (mA) Current (mA) Trip current 60 Protective threshold current 40 300 Protective threshold current 200 Hold current Hold current 20 100 0 -20 0 20 40 Ambient Temperature (C) 60 0 -20 80 0 20 40 Ambient Temperature (C) 60 80 PTGL14AR100M6B72B0 800 600 Current (mA) Trip current 400 Protective threshold current 200 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 80 8 c Protective Threshold Current Range (140V Series) PTGL07AR330M6A51B0 PTGL09AR220M6C61B0 800 300 Trip current 600 Current (mA) Current (mA) 200 Protective threshold current 400 Trip current 100 Protective threshold current Hold current 200 Hold current 0 -20 0 40 20 Ambient Temperature (C) 60 0 80 -20 20 40 Ambient Temperature (C) 60 80 60 80 PTGL12AR100M6C01B0 800 800 600 600 Current (mA) Current (mA) PTGL10AR150M6C61B0 0 Trip current 400 Trip current 400 Protective threshold current Protective threshold current Hold current 200 200 Hold current 0 -20 0 40 20 Ambient Temperature (C) 60 80 0 -20 0 40 20 Ambient Temperature (C) Continued on the following page. 52 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (140V Series) PTGL13AR6R8M6C01B0 PTGL16AR5R6M6C01B0 800 800 Trip current Trip current 600 600 Current (mA) Current (mA) Protective threshold current Protective threshold current 400 Hold current 400 Hold current 200 200 0 -20 0 40 20 Ambient Temperature (C) 60 80 0 -20 0 40 20 Ambient Temperature (C) 60 80 c Operating Time 125V Series (Typical Curve) PTGL05AR181M7P52B0 PTGL09AR220M6B52B0 70 70 60 -10C 25C 60C Ambient Temp. 60 50 Operating Time (sec.) Operating Time (sec.) 50 -10C 25C Ambient Temp. 60C 40 30 30 8 20 20 10 10 0 40 0 0.1 0 0.2 0.3 Overcurrent (A) 0 0.2 0.4 0.6 Overcurrent (A) 0.8 PTGL14AR100M6B72B0 70 -10C 25C 60C Ambient Temp. 60 Operating Time (sec.) 50 40 30 20 10 0 0 0.5 1.0 Overcurrent (A) 1.5 53 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Operating Time 140V Series (Typical Curve) PTGL07AR330M6A51B0 PTGL09AR220M6C61B0 70 70 60 60 50 -10C 25C Ambient Temp. 60C 40 30 Operating Time (sec.) Operating Time (sec.) 50 -10C 25C Ambient Temp. 60C 40 30 20 20 10 10 0 0 0.25 0.50 Overcurrent (A) 0 0.75 0 PTGL10AR150M6C61B0 70 60 60 40 30 Operating Time (sec.) Operating Time (sec.) 50 -10C 25C Ambient Temp. 60C 10 10 0.5 1.0 Overcurrent (A) 0 1.5 -10C 25C Ambient Temp. 60C 30 20 0 0 70 70 60 60 50 50 30 10 10 0 0.5 1.0 Overcurrent (A) 1.5 1.5 30 20 0 1.0 Overcurrent (A) -10C 25C Ambient Temp. 60C 40 20 0 54 -10C 25C 60C Ambient Temp. 0.5 PTGL16AR5R6M6C01B0 Operating Time (sec.) Operating Time (sec.) PTGL13AR6R8M6C01B0 40 1.5 40 20 0 1.0 Overcurrent (A) PTGL12AR100M6C01B0 70 50 8 0.5 0 1.0 2.0 Overcurrent (A) 3.0 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Application Circuit (1) Transformer Protection Circuit 1) (2) Transformer Protection Circuit 2) PTH PTH D Power Supply C Power Supply (3) Transistor Protection Circuit (4) Fluorescent Lamp Protection Circuit PTH RL RB Fluorescent Lamp C S S CH Power Source R C C RA C RE PTH 8 55 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overcurrent Protection 250/265V Series D max. T max. "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "POSISTOR" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. c Features 250V Series +0.8 F -0.3 1. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 2. Circuit is protected until current is turned off. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. od0.05 (in mm) T max. 6.0 max. D max. od 0.05 4.01.5 265V Series (PTGL_1B0) F1.5 (in mm) 9 D max. 265V Series (PTGL_2B0) F1.5 4.01.5 6.0 max. T max. od0.05 (in mm) Part Number Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (F) (mm) (phi d) (mm) PTGL07BB220N0B52A0 250 90 130 250 300 0.5 22 30% 8.0 6.0 5.0 0.6 PTGL10BB120N0P52A0 250 90 130 250 300 0.6 12 30% 11.0 6.0 5.0 0.6 PTGL09AR390N0B52A0 250 100 115 245 280 0.6 39 30% 10.0 6.0 5.0 0.6 PTGL05AR151H8P52B0 265 28 35 65 78 0.2 150 25% 6.0 6.0 5.0 0.6 PTGL05AR181M9N51B0 265 29 37 60 70 0.3 180 20% 6.5 6.5 5.0 0.5 PTGL05AR121M9N51B0 265 35 47 75 85 0.3 120 20% 6.5 6.5 5.0 0.5 PTGL07AR820M9A51B0 265 60 75 125 150 0.5 82 20% 8.2 6.5 5.0 0.5 PTGL07AR700H8B52B0 265 66 85 160 185 0.4 70 25% 8.0 6.0 5.0 0.6 PTGL07AR650H8B52B0 265 68 84 162 190 1.0 65 25% 8.0 6.0 5.0 0.6 PTGL07AR450H8B52B0 265 80 105 200 220 1.0 45 25% 8.0 6.0 5.0 0.6 PTGL07AR560M9A51B0 265 80 95 165 190 0.8 56 20% 8.2 6.5 5.0 0.5 PTGL09AR390M9C61B0 265 100 130 210 240 1.2 39 20% 10.0 6.5 6.5 0.65 Continued on the following page. 56 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Voltage (at +60C) (at +25C) (at +25C) (at -10C) Current (at +25C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (ohm) (D) (mm) (mm) (F) (mm) (phi d) (mm) Part Number PTGL09AR250H8B52B0 265 118 150 290 330 1.0 25 25% 10.0 6.0 5.0 0.6 PTGL12AR270M9C01B0 265 150 200 310 360 1.5 27 20% 14.0 6.5 10.0 0.65 PTGL12AR150H8B72B0 265 165 210 400 460 1.5 15 25% 12.5 6.0 7.5 0.6 PTGL14AR180M9C01B0 265 180 230 380 440 1.8 18 20% 15.7 6.5 10.0 0.65 PTGL13AR100H8B72B0 265 200 260 480 560 2.2 10 25% 14.0 6.0 7.5 0.6 PTGL18AR6R0H8B72B0 265 300 380 715 830 4.1 6.0 25% 18.5 6.0 7.5 0.6 Maximum Current shows typical capacities of the transformer which can be used. 250/265V Series are recognized by UL. Only PTGL_52B0 type is available in taping type. Please refer to the page of "Package" information for details. c Protective Threshold Current Range (250V Series) PTGL07BB220N0B52A0 PTGL10BB120N0P52A0 400 400 Protective Threshold Current (mA) 350 300 Current (mA) Trip current 250 200 Protective threshold current 150 100 Hold current 300 Trip current 200 Protective threshold current 100 Hold current 50 0 0 -20 0 20 40 Ambient Temperature (C) 60 80 -20 0 40 20 Ambient Temperature (C) 60 80 PTGL09AR390N0B52A0 400 9 300 Current (mA) Trip current 200 Protective threshold current 100 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 80 c Protective Threshold Current Range (265V Series) PTGL05AR151H8P52B0 PTGL05AR181M9N51B0 80 Trip current 120 100 Current (mA) Current (mA) 60 Protective threshold current 40 80 Trip current 60 Protective threshold current Hold current 40 20 20 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 0 -20 0 20 40 Ambient Temperature (C) 60 80 Continued on the following page. 57 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (265V Series) PTGL05AR121M9N51B0 PTGL07AR820M9A51B0 120 250 100 200 Current (mA) Current (mA) Trip current 80 60 Protective threshold current Trip current 150 Protective threshold current 100 40 Hold current 50 20 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 0 80 -20 0 20 40 60 80 Ambient Temperature (C) PTGL07AR700H8B52B0 PTGL07AR650H8B52B0 200 300 Trip current Current (mA) Current (mA) 150 Protective threshold current 100 200 Trip current Protective threshold current 100 Hold current 50 Hold current 0 -20 0 20 40 Ambient Temperature (C) 0 60 -20 PTGL07AR450H8B52B0 0 20 40 Ambient Temperature (C) 60 PTGL07AR560M9A51B0 300 9 250 Trip current 200 Current (mA) Current (mA) 200 Protective threshold current Trip current 150 Protective threshold current 100 100 Hold current Hold current 0 50 0 -20 0 20 40 Ambient Temperature (C) -20 60 0 20 40 60 80 Ambient Temperature (C) PTGL09AR390M9C61B0 PTGL09AR250H8B52B0 400 Trip current 300 Current (mA) Current (mA) 300 Trip current 200 Protective threshold current 200 Protective threshold current 100 100 Hold current Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 Continued on the following page. 58 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Protective Threshold Current Range (265V Series) PTGL12AR270M9C01B0 PTGL12AR150H8B72B0 400 600 Current (mA) Trip current Current (mA) 300 Protective threshold current 200 Trip current 400 Protective threshold current Hold current 200 100 Hold current 0 -20 0 40 20 Ambient Temperature (C) 60 0 80 -20 PTGL14AR180M9C01B0 0 20 40 Ambient temperature (C) 60 PTGL13AR100H8B72B0 800 600 600 Current (mA) Current (mA) Trip current Trip current 400 Protective threshold current 200 400 Protective threshold current 200 Hold current 0 -20 0 Hold current 40 20 Ambient Temperature (C) 60 80 0 -20 0 20 40 Ambient Temperature (C) 60 PTGL18AR6R0H8B72B0 1500 9 Current (mA) 1000 Trip current Protective threshold current 500 Hold current 0 -20 0 20 40 Ambient Temperature (C) 60 59 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 c Operating Time 250V Series (Typical Curve) PTGL07BB220N0B52A0 PTGL10BB120N0P52A0 40 70 60 Operating Time (sec.) Operating Time (sec.) 30 20 -10C 25C Ambient Temp. 60C 10 50 -10C 25C Ambient Temp. 60C 40 30 20 10 0 0.5 1.0 1.5 0 0.5 Overcurrent (A) 1.0 Overcurrent (A) 1.5 PTGL09AR390N0B52A0 Operating Time (sec.) 30 -10C 25C Ambient Temp. 60C 20 9 10 0 0 0.5 1.0 1.5 Overcurrent (A) 2.0 c Operating Time 265V Series (Typical Curve) PTGL05AR151H8P52B0 PTGL05AR181M9N51B0 70 60 25 50 40 30 -10C 25C Ambient Temp. 60C Operating Time (sec.) Operating Time (sec.) 20 15 -10C 25C Ambient Temp. 60C 10 20 5 10 0 0 0.04 0.08 0.12 0.16 Overcurrent (A) 0.20 0 0 0.2 0.4 0.6 Overcurrent (A) 0.8 Continued on the following page. 60 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 265V Series (Typical Curve) PTGL07AR820M9A51B0 25 25 20 20 Operating Time (sec.) Operating Time (sec.) PTGL05AR121M9N51B0 15 -10C 25C Ambient Temp. 60C 15 -10C 25C Ambient Temp. 60C 10 10 5 5 0 0 0 0.2 0.4 0.6 Overcurrent (A) 0.8 0 0.5 70 60 60 50 50 40 -10C 25C Ambient Temp. 60C 30 40 30 -10C 25C Ambient Temp. 60C 20 20 10 10 0 0 0.2 0.4 0.6 Overcurrent (A) 1.5 PTGL07AR650H8B52B0 70 Operating Time (sec.) Operating Time (sec.) PTGL07AR700H8B52B0 1.0 Overcurrent (A) 0 0 0.8 0.2 PTGL07AR450H8B52B0 0.4 9 0.6 0.8 Overcurrent (A) 1.0 PTGL07AR560M9A51B0 70 25 50 20 Operating Time (sec.) Operating Time (sec.) 60 40 30 -10C 25C Ambient Temp. 60C -10C 25C Ambient Temp. 60C 15 10 20 5 10 0 0 0.2 0.4 0.6 0.8 Overcurrent (A) 1.0 1.2 0 0 0.5 1.0 Overcurrent (A) 1.5 Continued on the following page. 61 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 265V Series (Typical Curve) PTGL09AR390M9C61B0 PTGL09AR250H8B52B0 70 60 25 50 Operating Time (sec.) Operating Time (sec.) 20 15 10 -10C 25C Ambient Temp. 60C 30 -10C 25C Ambient Temp. 60C 20 5 0 40 10 0 1.0 2.0 Overcurrent (A) 0 0 3.0 0.2 PTGL12AR270M9C01B0 0.4 0.6 0.8 Overcurrent (A) 1.0 PTGL12AR150H8B72B0 70 60 25 50 Operating Time [sec.] Operating Time (sec.) 20 15 -10C 25C Ambient Temp. 60C 9 40 -10C 25C 60C Ambient Temp. 30 10 20 5 0 10 0 0 0 1.0 2.0 Overcurrent (A) 0.4 3.0 PTGL14AR180M9C01B0 0.8 1.2 Overcurrent [A] PTGL13AR100H8B72B0 70 25 60 50 40 -10C 25C Ambient Temp. 60C 30 Operating Time (sec.) Operating Time [sec.] 20 15 -10C 25C Ambient Temp. 60C 10 20 5 10 0 0 0.4 0.8 1.2 Overcurrent [A] 1.6 0 0 1.0 2.0 Overcurrent (A) 3.0 Continued on the following page. 62 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Operating Time 265V Series (Typical Curve) c Application Circuit PTGL18AR6R0H8B72B0 (1) Transistor Protection Circuit 70 PTH RL RB 60 Operating Time [sec.] 50 40 RA RE C 30 -10C 25C Ambient Temp. 60C 20 10 0 0 1.0 2.0 3.0 Overcurrent [A] 4.0 (2) Transformer Protection Circuit 1) (3) Transformer Protection Circuit 2) PTH PTH D Power Supply C Power Supply 9 (4) Fluorescent Lamp Protection Circuit Fluorescent Lamp C S (5) Telecommunication Circuit PTH S Varistor CH Arrester Power Source R Telephone or PBX C C Varistor PTH PTH 63 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 PTGL Series Narrow Current Band Specifications and Test Methods No. Item Rating Value Method of Examination The temperature range with maximum voltage applied to the POSISTORr. 1 Operating Temperature -30 to +85C 2 Storage Temperature -40 to +125C The temperature range with zero voltage. Satisfies ratings Resistance value is measured by applying voltage under 1.0Vdc (by a direct current of less than 10mA) at 25C. But it must be measured after maximum voltage is applied for 180 seconds and then is left for 2 hours at 25C. Withstanding Voltage No problem We apply AC voltage 120% that of the maximum voltage to POSISTORr by raising voltage gradually for 1805 seconds at 25C. (A protective resistor is to be connected in series, and the inrush current through POSISTORr must be limited below maximum rated value.) Protective Threshold Current Satisfies ratings (Trip Current, Hold Current) Maximum current is measured in this examination. Voltage is applied to POSISTORr for 3 minutes step by step on still air based on "Protective Threshold Current Test Conditions" shown in next page. Stable current is measured at each step. 3 4 5 6 Resistance Value (at 25C) Tensile Strength of Lead Wire Terminal The load is gradually applied to each terminal of POSISTORr until the force of the following table in the axial direction with fixing POSISTORr's body itself and this load is kept for 10 seconds. No damage Lead Diameter o0.60mm max. o0.65mm min. 7 Bending Strength of Lead Wire Terminal Lead wire does not come off POSISTORr is held so that it is perpendicular to the lead wire with the following lead hanging in the axial direction of the lead wire. The lead wire is slowly bent to 90 and returned. Then it is slowly bent in the opposite direction and returned to original state. Lead Diameter o0.60mm max. o0.65mm min. 8 9 Solderability Terminal Durability of Soldering 10 Humidity Test 11 12 Load Test at High Temperature Load Cycle Test at Room Temperature Force 4.90N 9.80N Force 2.45N 4.90N Solder is applied around the lead wire covering 3/4 or more of the circumference without gap in the axial direction. The Lead wire of POSISTORr is soaked in an Isopropyl Alcohol (JIS K 8839) solution (about 25wt%) of colophony (JIS K 5902) for 5-10 sec. Each lead wire is soaked in molten solder (JIS Z 3282 H60A) at 2355C from the bottom to a point of 2.0-2.5mm for 20.5 seconds. R/R25V15% The lead wire of POSISTORr is soaked in molten solder (JIS Z 3282 H60A) at 35010C from the bottom to a point of 2.0-2.5mm for 3.50.5 seconds. After the device is left at room temperature (25C) for 244 hours, the resistance is then measured. R/R25V20% POSISTORr is set in an environmental chamber at 602C and 90-95% humidity for 5004 hours. After the device is left at room temperature (25C) for one hour, the resistance measurement is then performed. R/R25V20% POSISTORr is set in an environmental chamber at 853C with maximum voltage applied for 5004 hours. After the device is left at room temperature (25C) for one hour, the resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below maximum rated value.) R/R25V20% POSISTORr is set at room temperature (252C) with maximum voltage applied for 1 minute and then is left without voltage applied for 5 minutes. This cycle is repeated for 100 cycles, and after the device is left at room temperature (25C) for one hour, the resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below maximum rated value.) Continued on the following page. 64 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 PTGL Series Narrow Current Band Specifications and Test Methods Continued from the preceding page. c Protective Threshold Current Test Conditions 1. Substrate Materials: Phenol Size: 50x50xt1.6mm Land Pattern: Cu land without through hole 25.0 2.5 2.5 5.0 2.5 o0.9 25.0 3.0 1.0 25.0 25.0 (in mm) 2. Measurement condition Solder POSISTORr on the substrate, then put a 150mm3 cover surrounding POSISTORr to prevent airflow. 3. Measurement circuit POSISTORr D.C POWER SUPPLY D.V + Digital - Voltmeter 1 D.V + Digital - Voltmeter 65 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 PTGL Series Specifications and Test Methods Item Continuous Operating Temperature Resistance Value (at 25C) Withstanding Voltage Tensile Strength of Lead Wire Terminal Rating Value Method of Examination -10 to +60 C The temperature range with maximum voltage applied to the POSISTORr. Satisfies ratings Resistance value is measured by applying voltage under 1.5Vdc (by a direct current of less than 10mA) at 25C. But it must be measured after maximum voltage is applied for 180 seconds and then is left for 2 hours at 25C. As for 16V series, measurement probes should be connected on the lead wire at the point within 2mm from the below side of the forming. Resistance should be measured by 4 wiring method. No problem We apply AC voltage 120% (16V Series: 110%) that of the maximum voltage to POSISTORr by raising voltage gradually for 1805 seconds at 25C. (A protective resistor is to be connected in series, and the inrush current through POSISTORr must be limited below max. rated value.) No damage The load is gradually applied to each terminal of POSISTORr until the force of the following table in the axial direction with fixing POSISTORr's body itself and this load is being kept for 10 seconds. Lead Diameter o0.60mm max. o0.65mm min. Bending Strength of Lead Wire Terminal Lead wire does not come off. Force 4.90N 9.80N POSISTORr is held so that it is perpendicular to the lead wire with the following lead hanging in the axial direction of the lead wire. The lead wire is slowly bent to 90 and returned. Then it is slowly bent in the opposite direction and returned to original state. Lead Diameter o0.60mm max. o0.65mm min. Force 2.45N 4.90N Solderability Solder is applied around the lead wire covering 3/4 or more of the circumference without gap in the axial direction. The Lead wire of POSISTORr is soaked in an Isopropyl Alcohol (JIS K 8839) or ethanol (JIS K 8101) solution (about 25wt%) of colophony (JIS K 5902) for 5 to 10 sec. And, each lead wire is soaked in molten solder (JIS Z 3282 H60A) at 2355C from the bottom to a point of 2.0 to 2.5mm for 20.5 sec. Terminal Durability of Soldering R/R25<15% The lead wire of POSISTORr is soaked in molten solder (JIS Z 3282 H60A) at 35010C from the bottom to a point of 2.0 to 2.5mm for 3.50.5 sec. After the device is being left at room temperature (25C) for 244 hours, the resistance is measured. <20% R/R25= POSISTORr is set in an environmental chamber at 402C and 90 to 95% humidity for 5004 hours. After the device is left at room temperature (25C) for one hour, the resistance measurement is performed. <20% R/R25= POSISTORr is set in an environmental chamber at 603C with maximum voltage applied for 1.5 hours and then is left without voltage applied for 0.5 hours. This cycle is repeated for 100010 hours, and after the device is left at room temperature (25C) for one hour, the resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below max. rated value.) Humidity Test Load Cycle Test at High Temperature 66 = R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Inrush Current Suppression (Less than 100F) D max. T max. 4.01.5 6.0 max. POSISTORr is one of lead type PTC Thermistor that is able to support overcurrent or inrush current issue on the power supply circuit. It is able to integrated circuit for protection from inrush current suppression with POSISTORr and relay or semiconductor switch as thyristor. c Features od0.05 F1.5 1. Protection against overcurrent situations 2. Automatic reset from protective trip mode 3. Space-saving 4. Various characteristics to meet a suitable resistance value (in mm) c Applications POSISTORr is an integrated solution to work as both current limit resistor and overcurrent fuse. It works as a stable resistor in normal operation and products itself against overcurrent situation. It can be replaced from normal resistor or the resistor with temperature fuses solution as Fig.1. POSISTORr + - + - Load Load Fig.1 10 POSISTORr works as normal resistor in normal condition, and it works as protector against over current situation on the circuit. 1. High-power switching power supply (LCD TV) 2. The power supply for inverter on outside unit for Air-conditioner 3. The power supply for inverter type fluorescent lamp 4. Other SW type power supply Part Number Max. Voltage (V) Resistance (at +25C) (ohm) Max. Inrush Current (A) Max. Applying Time of Inrush (ms) Body Diameter (D) (mm) Thickness (T) (mm) Lead Space (F) (mm) Lead Diameter (phi d) (mm) PTGL07AS121M0N51B0 280 120 20% 8.46 peak 10 7.8 6.0 5.0 0.5 PTGL07AS181M0N51B0 280 180 20% 6.22 peak 10 7.8 6.0 5.0 0.5 PTGL07AS201M0N51B0 280 200 20% 5.66 peak 10 7.8 6.0 5.0 0.5 Max. inrush current shows the maximum inrush current value which be introduced into "POSISTOR" at operating temperature range. Max. applying time of inrush shows the maximum applying time of inrush current value at operating temperature range. Operating temperature range is -40 to +105C. Taping type of part numbers with "A0" is available. 67 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Inrush Current Suppression for High Capacitance (100F or more) D max. T max. 6.0 max. POSISTORr is one of lead type PTC Thermistor that is able to support overcurrent or inrush current issue on the power supply circuit. It is able to integrated circuit for protection from inrush current suppression with POSISTORr and relay or semiconductor switch as thyristor. 1. Protection against overcurrent situations 2. Automatic reset from protective trip mode 3. Space-saving 4. Various characteristics to meet a suitable resistance value F1.5 4.01.5 c Features od0.05 (in mm) c Applications POSISTORr is an integrated solution to work as both current limit resistor and overcurrent fuse. It works as a stable resistor in normal operation and products itself against overcurrent situation. It can be replaced from normal resistor or the resistor with temperature fuses solution as Fig.1. POSISTORr + - + - Load Load Fig.1 11 POSISTORr works as normal resistor in normal condition, and it works as protector against over current situation on the circuit. 1. High-power switching power supply (LCD TV) 2. The power supply for inverter on outside unit for Air-conditioner 3. The power supply for inverter type fluorescent lamp 4. Other SW type power supply Part Number Max. Resistance Max. Inrush Voltage (at +25C) Current (V) (ohm) (A) Max. Charge Energy (at +60C) (J) Max. Charge Energy (at +85C) (J) Body Thickness Lead Lead Diameter (D) (T) Space (F) Diameter (phi d) (mm) (mm) (mm) (mm) PTGL14AS470H0B02BZ 280 47 25% 27 peak 106.9 56.9 16.0 6.5 10.0 0.6 PTGL16AS330H0B02BZ 280 33 25% 39 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL16AS470H0B02BZ 280 47 25% 27 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL16AS680H0B02BZ 280 68 25% 19 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL16AS101H0B02BZ 280 100 25% 13 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL20AS330H0D02BZ 280 33 25% 39 peak 181.7 131.7 22.0 6.5 10.0 0.8 PTGL20AS470H0D02BZ 280 47 25% 27 peak 181.7 131.7 22.0 6.5 10.0 0.8 Max. inrush current shows the maximum applying time of inrush current value at operating temperature range. Max charge energy is defined as the maximum charged up energy value of over 95%. The capacitance is calculated as the following formula. J=CV^2/2 C: capacitance, V: peak voltage Note: The criteria of the standard for the maximum charged up energy value of over 95%. If there is the difference between our definition and yours, could you ask us free? Operating temperature range is -20 to +85C. 68 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R90E.pdf Mar.4,2014 Inrush Current Suppression Specifications and Test Methods Item Humidity Test High Temperature Continuous Load Load Cycle Test at Room Temperature Rating Value Method of Examination R/R25V20% POSISTORr is set in an environmental chamber at 853C and 85% humidity for 5004 hours. After the device is left at room temperature (25C) for one hour, the resistance measurement is performed. R/R25V20% POSISTORr is set in an environmental chamber at 853C with maximum voltage applied for 5004 hours. After the device is left at room temperature (25C) for one hour, the resistance measurement is performed. R/R25V20% POSISTORr is set in a room temperature (252C) with maximum voltage applied for 1 minute, and then is left without voltage applied for 5 minutes. This cycle is repeated for 10k cycles, and after the device is left at room temperature (25C) for one hour, the resistance measurement is performed. 69 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overheat Sensing Chip Tight Tolerance Type e g e This chip PTC Thermistor is a reflow soldering SMD type for overheat sensing for power transistors, power diodes and power ICs in hybrid circuits. T c Features 1. SMD type is helpful for miniaturizing circuits because of its small size and light weight. 2. Excellent thermal response due to small size 3. Solid-state construction provides excellent resistance to mechanical vibration and impact resistance. 4. Contactless operation provides noiseless operation. L W Dimensions (mm) L W T e g PRF15_RC 1.00.05 0.50.05 0.50.05 0.15 to 0.4 0.3 min. PRF18_RB 1.60.15 0.80.15 0.80.15 0.1 to 0.6 Part Number Chip Tight Tolerance Type 0402 (1005) Size Sensing Temperature (at 10k ohm) (C) Sensing Temperature (at 100k ohm) (C) Maximum Voltage (V) Resistance (at 25C) (k ohm) Operating Temperature Range (C) PRF15AR102RB6RC 135 5C 150 3C 32 1 50% -40 to 160 PRF15BA102RB6RC 125 5C 140 3C 32 1 50% -40 to 150 PRF15BB102RB6RC 115 5C 130 3C 32 1 50% -40 to 140 PRF15BC102RB6RC 105 5C 120 3C 32 1 50% -40 to 130 PRF15BD102RB6RC 95 5C 110 3C 32 1 50% -40 to 120 PRF15BE102RB6RC 85 5C 100 3C 32 1 50% -40 to 110 PRF15BF102RB6RC 75 5C 90 3C 32 1 50% -40 to 100 PRF15BG102RB6RC 65 5C 80 3C 32 1 50% -40 to 90 Part Number This series is applied to reflow soldering. Sensing Temperature (at 4.7M ohm) (C) Maximum Voltage (V) Resistance (at 25C) (k ohm) Operating Temperature Range (C) PRF15BB103RB6RC 130 3C 32 10 50% -20 to 140 PRF15BE103RB6RC 100 3C 32 10 50% -20 to 110 PRF15BG103RB6RC 80 3C 32 10 50% -20 to 90 Part Number This series is applied to reflow soldering. 12 Chip Tight Tolerance Type 0603 (1608) Size Sensing Temperature (at 4.7k ohm) (C) Sensing Temperature (at 47k ohm) (C) Maximum Voltage (V) Resistance (at 25C) (ohm) Operating Temperature Range (C) PRF18BB471RB5RB 115 3C 130 7C 32 470 50% -20 to 140 PRF18BC471RB5RB 105 3C 120 7C 32 470 50% -20 to 130 PRF18BD471RB5RB 95 3C 110 7C 32 470 50% -20 to 120 PRF18BE471RB5RB 85 3C 100 7C 32 470 50% -20 to 110 PRF18BF471RB5RB 75 3C 90 7C 32 470 50% -20 to 100 PRF18BG471RB5RB 65 3C 80 7C 32 470 50% -20 to 90 Part Number This series is applied to flow/reflow soldering. This series is recognized by UL. 70 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overheat Sensing Chip Type e g e This chip PTC Thermistor is a reflow soldering SMD type for overheat sensing for power transistors, power diodes and power ICs in hybrid circuits. T c Features 1. SMD type is helpful for miniaturizing circuits because of its small size and light weight. 2. Excellent thermal response due to small size 3. Solid-state construction provides excellent resistance to mechanical vibration and impact resistance. 4. Contactless operation provides noiseless operation. L W Dimensions (mm) L W T e g PRF18_RB 1.60.15 0.80.15 0.80.15 0.1 to 0.6 PRF21_RA 2.00.2 1.250.2 0.90.2 0.2 min. 0.5 min. Part Number Chip Type 0603 (1608) Size Part Number Sensing Temperature (at 4.7k ohm) (C) Sensing Temperature (at 47k ohm) (C) Maximum Voltage (V) Resistance (at 25C) (ohm) Operating Temperature Range (C) PRF18AS471QB5RB 145 5C - 32 470 50% -20 to 160 PRF18AR471QB5RB 135 5C 150 7C 32 470 50% -20 to 160 PRF18BA471QB5RB 125 5C 140 7C 32 470 50% -20 to 150 PRF18BB471QB5RB 115 5C 130 7C 32 470 50% -20 to 140 PRF18BC471QB5RB 105 5C 120 7C 32 470 50% -20 to 130 PRF18BD471QB5RB 95 5C 110 7C 32 470 50% -20 to 120 PRF18BE471QB5RB 85 5C 100 7C 32 470 50% -20 to 110 PRF18BF471QB5RB 75 5C 90 7C 32 470 50% -20 to 100 PRF18BG471QB5RB 65 5C 80 7C 32 470 50% -20 to 90 This series is applied to flow/reflow soldering. This series is recognized by UL. Chip Type 0805 (2012) Size Sensing Temperature (at 4.7k ohm) (C) Maximum Voltage (V) Resistance (at 25C) (ohm) Operating Temperature Range (C) PRF21AS471QB5RA 145 5C 32 470 50% -20 to 160 PRF21AR471QB5RA 135 5C 32 470 50% -20 to 150 PRF21BA471QB5RA 125 5C 32 470 50% -20 to 140 PRF21BB471QB5RA 115 5C 32 470 50% -20 to 130 PRF21BC471QB5RA 105 5C 32 470 50% -20 to 120 PRF21BD471QB5RA 95 5C 32 470 50% -20 to 110 PRF21BE471QB5RA 85 5C 32 470 50% -20 to 100 Part Number 13 This series is applied to flow/reflow soldering. This series is recognized by UL. 71 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Type (Related Data) c Standard Land Pattern Dimensions c Resistance - Temperature Characteristics (Typical) Solder resist Chip BG Land BF BE BD BC BB BA c 1000 AR AS b a (in mm) Dimensions (mm) Part Number a b c Chip (LgW) 0.5 0.4-0.5 0.5 1.0g0.5 PRF15 Reflow Soldering 1.6g0.8 0.6-0.8 0.6-0.7 0.6-0.8 PRF18 2.0g1.25 1.0-1.2 0.5-0.7 1.0-1.2 PRF21 Soldering Methods Resistance Change (R/R25) 100 10 1 0.1 -20 0 20 40 60 80 100 120 140 Temperature (C) c Overheat Protection Circuit c Temperature Sensing Circuit +Vcc +Vcc R1 PTH RE2 RL RL1 Thermal Connection R1 RL2 R2 Load RE RE1 PTH 72 160 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Tight Tolerance Type (Reference Data) c Resistance - Temperature Characteristics Range PRF15BA102RB6RC 1000 1000 100 100 Resistance (k) Resistance (k) PRF15AR102RB6RC 10 1 1 0 40 80 120 160 0.1 -40 200 120 PRF15BC102RB6RC 100 100 10 1 160 200 160 200 160 200 10 1 0 40 80 120 160 0.1 -40 200 0 40 80 120 Ambient Temperature (C) Ambient Temperature (C) PRF15BD102RB6RC PRF15BE102RB6RC 1000 1000 100 100 Resistance (k) Resistance (k) 80 PRF15BB102RB6RC 1000 10 1 0.1 -40 40 Ambient Temperature (C) 1000 0.1 -40 0 Ambient Temperature (C) Resistance (k) Resistance (k) 0.1 -40 10 10 1 0 40 80 120 Ambient Temperature (C) 160 200 0.1 -40 0 40 80 120 Ambient Temperature (C) Continued on the following page. 73 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Tight Tolerance Type (Reference Data) Continued from the preceding page. c Resistance - Temperature Characteristics Range PRF15BG102RB6RC 1000 1000 100 100 Resistance (k) Resistance (k) PRF15BF102RB6RC 10 1 1 0.1 -40 40 0 80 120 160 0.1 -40 200 80 120 Ambient Temperature (C) PRF15BB103RB6RC PRF15BE103RB6RC 100000 100000 10000 10000 1000 1000 100 160 200 100 10 10 1 -20 40 0 Ambient Temperature (C) Resistance (k) Resistance (k) 10 0 20 40 60 80 100 120 140 1 -20 160 0 20 40 60 80 100 120 140 Ambient Temperature (C) Ambient Temperature (C) PRF15BG103RB6RC PRF18BB471RB5RB 100000 100000 10000 Resistance () Resistance (k) 10000 1000 100 1000 10 1 -20 0 20 40 60 80 Ambient Temperature (C) 100 120 140 100 -20 0 20 40 60 80 100 120 140 160 Temperature (C) Continued on the following page. 74 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Tight Tolerance Type (Reference Data) Continued from the preceding page. c Resistance - Temperature Characteristics Range PRF18BC471RB5RB PRF18BD471RB5RB 10000 10000 Resistance () 100000 Resistance () 100000 1000 100 -20 1000 0 20 40 60 80 100 120 140 100 -20 160 0 20 Temperature (C) 40 60 80 100 120 140 160 120 140 160 Temperature (C) PRF18BE471RB5RB PRF18BF471RB5RB 10000 10000 Resistance () 100000 Resistance () 100000 1000 100 -20 1000 0 20 40 60 80 100 120 140 160 Temperature (C) 100 -20 0 20 40 60 80 100 Temperature (C) PRF18BG471RB5RB 100000 Resistance () 10000 1000 100 -20 0 20 40 60 80 100 120 140 160 Temperature (C) 75 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Type (Reference Data) c Resistance - Temperature Characteristics Range PRF18/21AS471Q Type PRF18/21AR471Q Type 100000 10000 10000 Resistance () Resistance () 100000 1000 1000 100 -20 0 20 40 60 80 100 120 140 100 -20 160 0 20 40 60 80 100 120 140 160 120 140 160 120 140 160 Temperature (C) Temperature (C) PRF18/21BA471Q Type PRF18/21BB471Q Type 100000 10000 10000 Resistance () Resistance () 100000 1000 100 -20 1000 0 20 40 60 80 100 120 140 100 -20 160 0 20 Temperature (C) 40 60 80 100 Temperature (C) PRF18/21BC471Q Type PRF18/21BD471Q Type 100000 10000 10000 Resistance () Resistance () 100000 1000 1000 100 -20 0 20 40 60 80 Temperature (C) 100 120 140 160 100 -20 0 20 40 60 80 100 Temperature (C) Continued on the following page. 76 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Type (Reference Data) Continued from the preceding page. c Resistance - Temperature Characteristics Range PRF18/21BE471Q Type PRF18BF471Q Type 10000 10000 Resistance () 100000 Resistance () 100000 1000 100 -20 1000 0 20 40 60 80 100 120 140 160 Temperature (C) 100 -20 0 20 40 60 80 100 120 140 160 Temperature (C) PRF18BG471Q Type 100000 Resistance () 10000 1000 100 -20 0 20 40 60 80 100 120 140 160 Temperature (C) 77 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods c PRF15_102 Series No. 1 Item Resistance Value at 25C Rating Value Metheod of Examination Within the specified range After applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25C, measured by applying voltage less than DC1.0V. 2 Vibration * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-6 (2007) * Soldered PTC to PCB (**) * Frequency range: 10 to 55Hz * Amplitude: 1.5mm * Sweep rate: 1 octave/min. * Direction: X-Y-Z (3 direction) * 24 cycles in each axis 3 Solderability Wetting of soldering area: U95% Reference standard: IEC 60068-2-58 (2004) * Solder: Sn-3.0Ag-0.5Cu * Solder temp.: 2455C * Immersion time: 30.3s * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] * Solder: Sn-3.0Ag-0.5Cu * Preheat: 1505C, 90 to 120s * Solder temp.: 2605C * Immersion time: 101s 4 Resistance to Soldering Heat 5 High Temperature Storage Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * (Max. operating temp.)2C * 1000+48/-0 hrs. 6 Low Temperature Storage Reference standard: IEC 60068-2-1 (2007) * Soldered PTC to PCB (**) * (Min. operating temp.)3C * 1000+48/-0 hrs 7 Damp Heat, Steady State Reference standard: IEC 60068-2-67 (1995) * Soldered PTC to PCB (**) * +852C, 855%RH * 1000+48/-0 hrs * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) 8 Thermal Shock Reference standard: IEC 60068-2-14 (2009) [ Test Na ] * Soldered PTC to PCB (**) * Transport time: <10 sec. * Test condition: See below table Step 1 2 Condition (Min. Operating temp.)3C (Max. Operating temp.)2C * Test cycle: 5 cycles 9 High Temperature Load Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * (Max. operating temp.)2C * Applied max. voltage * 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.0V after left at 252C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. * Glass-Epoxy PC board * Standard land dimension * Standard solder paste * Standard solder profile Above conditions are mentioned in Notice. 78 Time 30min. 30min. R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods c PRF15_103R Series No. 1 Item Resistance Value at 25C Rating Value Metheod of Examination Within the specified range After applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25C, measured by applying voltage less than DC3.0V. 2 Vibration * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-6 (2007) * Soldered PTC to PCB (**) * Frequency range: 10 to 55Hz * Amplitude: 1.5mm * Sweep rate: 1 octave/min. * Direction: X-Y-Z (3 direction) * 24 cycles in each axis 3 Solderability Wetting of soldering area: U95% Reference standard: IEC 60068-2-58 (2004) * Solder: Sn-3.0Ag-0.5Cu * Solder temp.: 2455C * Immersion time: 30.3s * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] * Solder: Sn-3.0Ag-0.5Cu * Preheat: 1505C, 90 to 120s * Solder temp.: 2605C * Immersion time: 101s 4 Resistance to Soldering Heat 5 High Temperature Storage Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * (Max. operating temp.)2C * 1000+48/-0 hrs. 6 Low Temperature Storage Reference standard: IEC 60068-2-1 (2007) * Soldered PTC to PCB (**) * (Min. operating temp.)3C * 1000+48/-0 hrs 7 Damp Heat, Steady State Reference standard: IEC 60068-2-67 (1995) * Soldered PTC to PCB (**) * +602C, 905%RH * 1000+48/-0 hrs * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) 8 Thermal Shock Reference standard: IEC 60068-2-14 (2009) [ Test Na ] * Soldered PTC to PCB (**) * Transport time: <10 sec. * Test condition: See below table Step 1 2 Condition (Min. Operating temp.)3C (Max. Operating temp.)2C Time 30min. 30min. * Test cycle: 5 cycles 9 High Temperature Load Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * (Max. operating temp.)2C * Applied max. voltage * 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC3.0V after left at 252C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. * Glass-Epoxy PC board * Standard land dimension * Standard solder paste * Standard solder profile Above conditions are mentioned in Notice. 79 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods c PRF18_471R Series No. 1 2 Item Resistance Value at 25C Adhesive Strength Rating Value Metheod of Examination Within the specified range After applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) There is no sign of exfoliation on electrode. Reference standard: IEC 60068-2-21 (2006) * Soldered PTC to PCB (**) * Force: 5.0N * Test time: 10 sec. 3 Vibration * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-6 (2007) * Soldered PTC to PCB (**) * Frequency range: 10 to 55Hz * Amplitude: 1.5mm * Sweep rate: 1 octave/min. * Direction: X-Y-Z (3 direction) * 24 cycles in each axis 4 Solderability Wetting of soldering area: U95% Reference standard: IEC 60068-2-58 (2004) * Solder: Sn-3.0Ag-0.5Cu * Solder temp.: 2455C * Immersion time: 30.3s * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] * Solder: Sn-3.0Ag-0.5Cu * Preheat: 1505C, 90 to 120s * Solder temp.: 2605C * Immersion time: 101s 5 Resistance to Soldering Heat 6 High Temperature Storage Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +1502C * 1000+48/-0 hrs. 7 Low Temperature Storage Reference standard: IEC 60068-2-1 (2007) * Soldered PTC to PCB (**) * -203C * 1000+48/-0 hrs 8 Damp Heat, Steady State Reference standard: IEC 60068-2-67 (1995) * Soldered PTC to PCB (**) * +402C, 905%RH * 500+24/-0 hrs * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) 9 Thermal Shock Reference standard: IEC 60068-2-14 (2009) [ Test Na ] * Soldered PTC to PCB (**) * Transport time: <10 sec. * Test condition: See below table Step 1 2 Condition -203C +1502C Time 30min. 30min. * Test cycle: 5 cycles 10 High Temperature Load Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +852C * Applied max. voltage * 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 252C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. * Glass-Epoxy PC board * Standard land dimension * Standard solder paste * Standard solder profile Above conditions are mentioned in Notice. 80 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Overheat Sensing Chip Type Specifications and Test Methods c PRF18/21_471Q Series No. 1 2 Item Resistance Value at 25C Adhesive Strength Rating Value Metheod of Examination Within the specified range After applying maximum operating voltage for 3 mins. and leaving for 2 hours in 25C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) There is no sign of exfoliation on electrode. Reference standard: IEC 60068-2-21 (2006) * Soldered PTC to PCB (**) * Force: 5.0N * Test time: 10 sec. 3 Vibration * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-6 (2007) * Soldered PTC to PCB (**) * Frequency range: 10 to 55Hz * Amplitude: 1.5mm * Sweep rate: 1 octave/min. * Direction: X-Y-Z (3 direction) * 24 cycles in each axis 4 Solderability Wetting of soldering area: U95% Reference standard: IEC 60068-2-58 (2004) * Solder: Sn-3.0Ag-0.5Cu * Solder temp.: 2455C * Immersion time: 30.3s * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] * Solder: Sn-3.0Ag-0.5Cu * Preheat: 1505C, 90 to 120s * Solder temp.: 2605C * Immersion time: 101s 5 Resistance to Soldering Heat 6 High Temperature Storage Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +1502C * 1000+48/-0 hrs. 7 Low Temperature Storage Reference standard: IEC 60068-2-1 (2007) * Soldered PTC to PCB (**) * -203C * 1000+48/-0 hrs 8 Damp Heat, Steady State Reference standard: IEC 60068-2-67 (1995) * Soldered PTC to PCB (**) * +402C, 905%RH * 500+24/-0 hrs * Appearance: No defects or abnormalities * Resistance (R25) change: Less than 20% (*) 9 Thermal Shock Reference standard: IEC 60068-2-14 (2009) [ Test Na ] * Soldered PTC to PCB (**) * Transport time: <10 sec. * Test condition: See below table Step 1 2 Condition -203C +1502C Time 30min. 30min. * Test cycle: 5 cycles 10 High Temperature Load Reference standard: IEC 60068-2-2 (2007) * Soldered PTC to PCB (**) * +852C * Applied max. voltage * 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 252C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. * Glass-Epoxy PC board * Standard land dimension * Standard solder paste * Standard solder profile Above conditions are mentioned in Notice. 81 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 POSISTORr for Circuit Protection Overheat Sensing Lead Type 5.0 max. "PTFL Series" is a popular lead type temperature sensor which is suitable for use as an air temperature sensing. 25 min. 3.0 max. "PTFM Series" is a screw clamp type temperature sensor which has been developed for sensing the temperature of Transistors, Thyristors, stereo main amplifiers, and other devices having risk of overheat. 4.0 max. 3.51.5 o0.50.05 PTFL Series "PTFM_S" Series is a screw clamp type temperature sensor which have high environmental reliability. It is certified by UL/cUL/VDE. (in mm) 7.50.4 c Features t0.50.05 2.5max. 13.20.5 1. PTFM_S Series is fixed easily to objects because of a screw clamp type. 2. Compact and light design as well as excellent thermal response. 3. Contactless operation provides a prolonged service life, yet permits noiseless operation. 4. The operating point of "POSISTOR" is set on the steepest point along the resistance-temperature characteristic curve, thus performing the overheat protective operation securely. 5. PTFM Series and PTFL Series have same resistancetemperature characteristics, providing a selection depending on the mounting method. 6. PTFM_S Series is certified by UL/cUL/VDE. It is suitable for a powersupply, etc, required the safety standard. 14 3.00.3 3.70.3 395 3.51.5 PTFM Series o0.50.05 in mm Max. Voltage Sensing Temp. (TS) Resistance Value Resistance Value Resistance Value at 25C (max.) (TS-10C) (max.) (TSC) (min.) (V) (C) (ohm) (ohm) (ohm) Part Number (Lead Type) Part Number (with Lug-Terminal Type) PTFL04BH471Q2N34B0 PTFM04BH471Q2N34BS 16 60 100 330 470 PTFL04BG471Q2N34B0 PTFM04BG471Q2N34BS 16 70 100 330 470 PTFL04BF471Q2N34B0 PTFM04BF471Q2N34BS 16 80 100 330 470 PTFL04BE471Q2N34B0 PTFM04BE471Q2N34BS 16 90 100 330 470 PTFL04BD471Q2N34B0 PTFM04BD471Q2N34BS 16 100 100 330 470 PTFL04BC471Q2N34B0 PTFM04BC471Q2N34BS 16 110 100 330 470 PTFL04BB471Q2N34B0 PTFM04BB471Q2N34BS 16 120 100 330 470 PTFL04BH222Q2N34B0 PTFM04BH222Q2N34BS 16 60 330 1.5k 2.2k PTFL04BG222Q2N34B0 PTFM04BG222Q2N34BS 16 70 330 1.5k 2.2k PTFL04BF222Q2N34B0 PTFM04BF222Q2N34BS 16 80 330 1.5k 2.2k PTFL04BE222Q2N34B0 PTFM04BE222Q2N34BS 16 90 330 1.5k 2.2k PTFL04BD222Q2N34B0 PTFM04BD222Q2N34BS 16 100 330 1.5k 2.2k PTFL04BC222Q2N34B0 PTFM04BC222Q2N34BS 16 110 330 1.5k 2.2k PTFL04BB222Q2N34B0 PTFM04BB222Q2N34BS 16 120 330 1.5k 2.2k Operating temperature range is -10 to TS+10C. 82 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Resistance - Temperature Characteristics Mar.4,2014 c Example of Thermal Response Time Operating Time of POSISTORr 100 104 BB BC 80 Resistance Change (%) (R/R90C) BD 103 BE Resistance Change (R/R25C) BF BG BH 102 10 PTFM04BE222Q2N34BS POSISTORr R meter Screw 60 40 Heater Aluminum plate T=90C constant 20 1 0 -20 0 20 40 60 80 Temperature (C) 100 120 10 20 30 40 Time (sec.) 50 60 Relation between resistance change and time after POSISTORr PTFM04BE222Q2N34BS is installed on the part heated at a constant temperature of 90C (3mm thick alminum sheet) is shown in the figure above. 140 c Overheat Protection Circuit 0 c Overheat Sensing Circuit +Vcc +Vcc R1 RE2 RL RL1 Thermal Connection PTH R1 RL2 R2 Load RE RE1 PTH c Resistance - Temperature Characteristics Range (Ref. Only) PTF_04BG471Q Type 104 104 103 103 Resistance () Resistance () PTF_04BH471Q Type 102 10 102 10 14 -20 0 20 40 60 80 Temperature (C) 100 120 140 -20 0 20 40 60 80 100 120 140 Temperature (C) Continued on the following page. 83 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Resistance - Temperature Characteristics Range (Ref. Only) PTF_04BE471Q Type 104 103 103 Resistance () Resistance () PTF_04BF471Q Type 104 102 10 102 10 -20 0 20 40 60 80 100 120 140 -20 0 20 Temperature (C) 80 100 120 140 140 160 PTF_04BC471Q Type 104 104 103 103 Resistance () Resistance () 60 Temperature (C) PTF_04BD471Q Type 102 102 10 10 -20 0 20 40 60 80 Temperature (C) 100 120 0 140 20 40 60 80 100 120 Temperature (C) PTF_04BB471Q Type PTF_04BH222Q Type 104 105 103 104 Resistance () Resistance () 40 102 103 14 102 10 0 20 40 60 80 100 Temperature (C) 120 140 160 -20 0 20 40 60 80 100 120 140 Temperature (C) Continued on the following page. 84 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Continued from the preceding page. c Resistance - Temperature Characteristics Range (Ref. Only) PTF_04BF222Q Type 105 104 104 Resistance () Resistance () PTF_04BG222Q Type 105 103 102 -20 103 102 0 20 40 60 80 100 120 140 -20 0 20 40 Temperature (C) 104 104 103 100 120 140 103 102 102 0 20 40 60 80 100 120 -20 140 0 20 40 60 80 100 120 140 Temperature (C) Temperature (C) PTF_04BC222Q Type PTF_04BB222Q Type 105 105 104 104 Resistance () Resistance () 80 PTF_04BD222Q Type 105 Resistance () Resistance () PTF_04BE222Q Type 105 -20 60 Temperature (C) 103 103 14 102 102 0 20 40 60 80 100 Temperature (C) 120 140 160 0 20 40 60 80 100 120 140 160 Temperature (C) 85 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Temperature Sensor Lead Type Specifications and Test Methods No. 1 Item Resistance Value Rating Value Method of Examination Satisfies specification Resistance value is measured by applying voltage under 1.5Vdc (by a direct current of less than 10mA) in a silicone oil vessel. 2 Withstanding Voltage No problem We apply AC voltage 120% that of the maximum voltage to POSISTORr by raising voltage gradually for 1805 seconds at 25C. (A protective resistor is to be connected in series, and the inrush current through POSISTORr must be limited below max. rated value.) 3 Tensile Strength of Lead Wire Terminal No damage The load is gradually applied to each terminal of POSISTORr until 9.80N in the axial-direction with fixing POSISTORr's body itself and this load is kept for 10 seconds. 4 Bending Strength of Lead Wire Terminal POSISTORr is held so that it is perpendicular to the lead wire with the following load hanging in the axial direction of the lead wire. The lead wire is slowly bent to 90 and returned; then it is slowly bent in the opposite direction and returned to original state. (Above mentioned procedure is done slowly with one cycle.) Lead wire does not come off. Series PTFL PTFM Force 2.45N 4.90N The lead wire of POSISTORr is soaked in a Isopropyl Alcohol (JIS K 8839) or ethanol (JIS K 8101) solution (about 25wt%) of colophony (JIS K 5902) for 5-10 sec. And, each lead wire is soaked in molten solder (JIS Z 3282 H60A) at 2355C from the bottom to a point of 2.0-2.5mm for 20.5 seconds. 5 Solderability Solder is applied around the lead wire covering 3/4 or more of the circumference without gap in the axial-direction. 6 Terminal Durability of Soldering R/R25VT15% The lead wire of POSISTORr is soaked in molten solder (JIS Z 3282 H60A) at 35010C from the bottom to a point of 2.0-2.5 mm for 3.50.5 seconds. And, after the device is left at room temperature (25C) for 244 hours, the resistance is measured. R/R25VT20% POSISTORr is set in an environmental chamber at 402C and 90-95% humidity for 5004 hours. And after the device is left at room temperature (25C) for one hour, the resistance measurement is performed. 7 Damp Heat R/R25VT20% PTH 8 High Temperature Load Rs S.W Test circuit 14 86 POSISTORr is set in an environmental chamber at 853C with maximum voltage applied for 1.5 hours and then is left without voltage applied for 0.5 hours. This cycle is repeated for 100010 hours, and after the device is left at room temperature (25C) for one hour, the resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below max. rated value.) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R90E.pdf Mar.4,2014 !Caution/Notice c !Caution (Storage and Operating Condition) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the characteristics or cause product failure and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid conditions 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist c !Caution (Other) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. c Notice (Storage and Operating Condition) To keep solderability of product from declining, the following storage conditions are recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, promptly reseal this product or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid, Chlorine, etc.) or in direct sunlight. c Notice (Soldering and Mounting) PTGL Series When the lead of this product is soldered, observe the following points to avoid the decline of element characteristics or break-down of the element. 1. Use rosin type flux or non-activated flux 2. Do not dip the body into flux (flux should be coated to lead wire only for soldering). 3. Be sure that preheating does not melt the soldering of this product. c Notice (Soldering and Mounting) PTFL/PTFM Series 1. PTFM Series is to be screwed beside the PowerTransistor on the radiative plate. 2. If PTFL Series is to be mounted with thermal cement, the cement should not be of the Cyano Acrylate family. 3. Please bend the lead wire far from the root of the body and do not apply force to the lead wire of the product. 4. When the lead of this product is soldered, observe the following points to avoid the decline of element characteristics or break-down of the element. (1) Use rosin type flux or non-activated flux. (2) Do not dip the body into flux. (Flux should be coated to lead wire only for soldering.) (3) Be sure that preheating does not melt the soldering of this product. 87 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice c Notice (Soldering and Mounting) PRG15 Series 1. Solder and Flux (1) Solder Paste Use solder paste Sn:Pb=63:37wt%. For your reference, we are using 63Sn/37Pb RMA9086 90-3-M18, manufactured by Alpha Metals Japan Ltd. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, manufactured by Senju Metal Industry Co., LTD for any Internal tests of this product. (2) Flux Use rosin type flux in soldering process. If below flux is used, some problems might be caused in the product characteristics and reliability. Please do not use below flux. s 3TRONG ACIDIC FLUX WITH HALIDE CONTENT EXCEEDING 0.2wt%). s 7ATER SOLUBLE FLUX (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning 2-propanol Less than 5 minutes at room temp. or Less than 2 minutes at 40C max. Less than 1 minute 20W/L Frequency of several 10kHz to 100kHz. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.10 to 0.15 mm. (b) After soldering, the solder fillet should be a height from 0.15 mm to the thickness of this product (see the figure at right). (c) Too much solder gives too strong mechanical stress to this product. Such stress may cause cracking or other mechanical damage. Also, it can destroy the electrical performance of this product. E T Electrode Solder Solder 0.15mm V T V E Continued on the following page. 88 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice Continued from the preceding page. (2) Reflow soldering conditions The following figure and table show our recommended reflow profile. (a) Insufficient preheating may cause a crack on ceramic body. The temperature difference between preheat and peak should be control within 100C to prevent this. (b) The excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) Rapid cooling by dipping in solvent or by other means is not recommended. (d) Please evaluate it on your condition if you will do mounting using not applying condition to the above-mentioned. Temp. (C) 260C 250C 220C Limit Profile 180C 150C Standard Profile Time (s) 9030s 30 to 60s 90s Standard Profile Preheat Soldering Time (U220C) Limit Profile 150 to 180C, 9030s 30 to 60s 90s Peak Temp. 250C 260C Reflow Cycle Max. 2 times Max. 2 times (3) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under specified mounting conditions. 89 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice c Notice (Soldering and Mounting) PRG18/21 Series 1. Solder and Flux (1) Solder Paste Use solder paste Sn:Pb=63:37wt%. For your reference, we are using 63Sn/37Pb RMA9086 90-3-M18, manufactured by Alpha Metals Japan Ltd. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, manufactured by Senju Metal Industry Co., LTD for any internal tests of this product. (2) Flux Use rosin type flux in the soldering process. If the flux below is used, some problems might be caused in the product characteristics and reliability. Please do not use these types of flux. s 3TRONG ACIDIC FLUX WITH HALIDE CONTENT EXCEEDING 0.2wt%). s 7ATER SOLUBLE FLUX (*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes' quality. Solvent Dipping Cleaning Ultrasonic Cleaning Drying 2-propanol Less than 5 minutes at room temp. or Less than 2 minutes at 40C max. Less than 1 minute 20W/L Frequency of several 10kHz to 100kHz. After cleaning, promptly dry this product. A sufficient cleaning should be applied to remove flux completely. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.15 to 0.20 mm. (b) After soldering, the solder fillet should be a height from 0.2 mm to the thickness of this product (see the figure at right). (c) Too much solder result in excessive mechanical stress to this product. Such stress may cause cracking or other mechanical damage. Also, it can destroy the electrical performance of this product. E T Electrode Solder Solder 0.2mm V T V E Continued on the following page. 90 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice Continued from the preceding page. Allowable Reflow Soldering Temp. and Time 270 260 Temperature (C) (2) Allowable Soldering Temperature and Time (a) Solder within the temperature and time combinations, indicated by the slanted lines in the graphs at right. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In the case of repeated soldering, the accumulated soldering time should be within the range shown at right. (For example, Reflow peak temperature: 260C, twice -> The accumulated soldering time at 260C is within 15sec.) 250 240 230 220 210 200 0 20 30 40 Time (second) 50 60 Reflow Soldering Conditions Preheating (in air) Temperature (C) (3) Standard Temperature Profile for Soldering (a) Insufficient preheating may cause a crack on the ceramic body. The difference between preheating temperature and maximum temperature in the profile should be 100C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. 10 Soldering Gradual cooling (in air) 240C 200 100 0 1 to 2 min. *20 sec. Preheating: 15010C, 1 to 2 minutes Soldering: 240C, 20 sec. * In the case of repeated soldering, the accumulated soldering time should be within the range shown in "(2) Allowable Soldering Temperature and Time." (4) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under the specified mounting conditions. 91 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice c Notice (Soldering and Mounting) PRF15_102R Series 1. Solder and Flux (1) Solder Paste Use solder paste Sn:Pb=63:37wt%. For your reference, we are using 63Sn/37Pb RMA9086 90-3-M18, manufactured by Alpha Metals Japan Ltd. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, manufactured by Senju Metal Industry Co., LTD for any Internal tests of this product. (2) Flux Use rosin type flux in soldering process. If below flux is used, some problems might be caused in the product characteristics and reliability. Please do not use below flux. s 3TRONG ACIDIC FLUX WITH HALIDE CONTENT EXCEEDING 0.2wt%). s 7ATER SOLUBLE FLUX (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning 2-propanol Less than 5 minutes at room temp. or Less than 2 minutes at 40C max. Less than 1 minute 20W/L Frequency of several 10kHz to 100kHz. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.10 to 0.15 mm. (b) After soldering, the solder fillet should be a height from 0.15 mm to the thickness of this product (see the figure at right). (c) Too much solder gives too strong mechanical stress to this product. Such stress may cause cracking or other mechanical damage. Also, it can destroy the electrical performance of this product. E T Electrode Solder Solder 0.15mm V T V E Continued on the following page. 92 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice Continued from the preceding page. (2) Reflow soldering conditions The following figure and table show our recommended reflow profile. (a) Insufficient preheating may cause a crack on ceramic body. The temperature difference between preheat and peak should be control within 100C to prevent this. (b) The excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) Rapid cooling by dipping in solvent or by other means is not recommended. (d) Please evaluate it on your condition if you will do mounting using not applying condition to the above-mentioned. Temp. (C) 270C 250C 220C Limit Profile 180C 150C Standard Profile Time (s) 9030s 30 to 60s 90s Standard Profile Preheat Soldering Time (U220C) Limit Profile 150 to 180C, 9030s 30 to 60s 90s Peak Temp. 250C 270C Reflow Cycle Max. 2 times Max. 2 times (3) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under specified mounting conditions. 93 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice c Notice (Soldering and Mounting) PRF15_103R Series 1. Solder and Flux (1) Solder Paste Use solder paste Sn:Pb=63:37wt%. For your reference, we are using 63Sn/37Pb RMA9086 90-3-M18, manufactured by Alpha Metals Japan Ltd. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, manufactured by Senju Metal Industry Co., LTD for any Internal tests of this product. (2) Flux Use rosin type flux in soldering process. If below flux is used, some problems might be caused in the product characteristics and reliability. Please do not use below flux. s 3TRONG ACIDIC FLUX WITH HALIDE CONTENT EXCEEDING 0.2wt%). s 7ATER SOLUBLE FLUX (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning 2-propanol Less than 5 minutes at room temp. or Less than 2 minutes at 40C max. Less than 1 minute 20W/L Frequency of several 10kHz to 100kHz. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.10 to 0.15 mm. (b) After soldering, the solder fillet should be a height from 0.15 mm to the thickness of this product (see the figure at right). (c) Too much solder gives too strong mechanical stress to this product. Such stress may cause cracking or other mechanical damage. Also, it can destroy the electrical performance of this product. E T Electrode Solder Solder 0.15mm V T V E Continued on the following page. 94 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice Continued from the preceding page. Allowable Reflow Soldering Temp. and Time 280 270 Temperature (C) (2) Allowable Soldering Temperature and Time (a) Solder within the temperature and time combinations, indicated by the slanted lines in the graphs at right. (b) The excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In case of repeated soldering, the accumulated soldering time should be within the range shown below figure. ( For example, Reflow peak temperature: 260C, twice -> The accumulated soldering time at 260C is within 30 sec. ) 260 250 240 230 220 210 0 10 20 30 40 50 60 70 80 90 100110 Time (sec.) Reflow Soldering Conditions Preheating (in air) Temperature (C) (3) Standard Temperature Profile for Soldering (a) Insufficient preheating may cause a crack on ceramic body. Difference between preheating temperature and maximum temperature in the profile should be 100C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. Soldering Gradual cooling (in air) 250C 200 100 0 1 to 2 min. *20 sec. Preheating: 15010C, 1 to 2 minutes Soldering: 250C, 20 seconds * In case of repeated soldering, the accumulated soldering time should be within the range shown above figure (2). (4) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under specified mounting conditions. 95 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice c Notice (Soldering and Mounting) PRF18/21 Series 1. Solder and Flux (1) Solder Paste (a) Flow Soldering: Use Sn:Pb=60:40wt%, Sn:Pb=63:37wt%, Sn:Ag:Cu=96.5:3.0:0.5wt% or equivalent type of solder. (b) Reflow Soldering: Use Sn:Pb=60:40wt%, Sn:Pb=63:37wt%, Sn:Ag:Cu=96.5:3.0:0.5wt% or equivalent type of solder paste. For your reference, we are using "63Sn/37Pb RMA9086 90-3-M18," manufactured by Alpha Metals Japan Ltd., "96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V," manufactured by Senju Metal Industry Co., Ltd. for any internal tests of this product. (2) Flux Use rosin type flux in the soldering process. If the flux below is used, some problems might be caused in the product characteristics and reliability. Please do not use these types of flux. s 3TRONG ACIDIC FLUX WITH HALIDE CONTENT EXCEEDING 0.2wt%). s 7ATER SOLUBLE FLUX (*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes' quality. (1) Cleaning Conditions Solvent 2-propanol Dipping Cleaning Ultrasonic Cleaning Less than 5 minutes at room temp. or Less than 2 minutes at 40C max. Less than 1 minute 20W/L Frequency of several 10kHz to 100kHz. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. (1) Printing Conditions of Solder Paste (a) Recommended thickness of solder paste printing should be from 0.15 to 0.20mm. (b) After soldering, the solder fillet should be a height from 0.2 mm to the thickness of this product (see the figure at right). (c) Too much solder result in excessive mechanical stress on this product. Such stress may cause cracking or other mechanical damage. Also, it can destroy the electrical performance of this product. E T Electrode Solder Solder 0.2mm V T V E Continued on the following page. 96 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 !Caution/Notice Continued from the preceding page. (3) Allowable Soldering Temperature and Time (a) Solder within the temperature and time combinations, indicated by the slanted lines in the following graphs. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In the case of repeated soldering, the accumulated soldering time should be within the range shown in the figures below. (For example, Reflow peak temperature: 260C, twice -> The accumulated soldering time at 260C is within 30sec.) Allowable Flow Soldering Temp. and Time Allowable Reflow Soldering Temp. and Time 270 280 260 270 250 260 Temperature (C) Temperature (C) (2) Adhesive Application and Curing (a) If insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, this product may have a loose contact with the land, during flow soldering. (b) Too low viscosity of adhesive causes this product to slip on the board, after mounting. 240 230 220 210 200 0 250 240 230 220 10 20 Time (sec.) 210 0 10 20 30 40 50 60 70 80 90 100110 Time (sec.) 30 (4) Recommendable Temperature Profile for Soldering (a) Insufficient preheating may cause a crack on the ceramic body. The difference between preheating temperature and maximum temperature in the profile should be 100C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. Reflow Soldering Conditions Temperature (C) Preheating (in air) Soldering Gradual cooling (in air) 250C 200 100 Preheating (in air) Temperature (C) Flow Soldering Conditions Soldering Gradual cooling (in air) 250C 200 100 0 0 1 to 2 min. *3 sec. 1 to 2 min. *20 sec. Preheating: 15010C, 1-2 minutes. Soldering: 250C, 3 sec. Preheating: 15010C, 1-2 minutes. Soldering: 250C, 20 sec. * In the case of repeated soldering, the accumulated soldering time should be within the range shown in "(3) Allowable Soldering Temperature and Time." * In the case of repeated soldering, the accumulated soldering time should be within the range shown in "(3) Allowable Soldering Temperature and Time." (5) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process caused by mounting conditions. Please make sure that this product is correctly mounted under the specified mounting conditions. 97 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution/Notice c Notice (Handling) PTGL Series 1. Do not apply an excessive force to the lead. Otherwise, it may cause the junction between lead and element to break, or may crack the element. Therefore, holding the element side lead wire is recommended when lead wire is bent or cut. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as decline of characteristics or current leak. 3. When this product is operated, the temperature of some areas may be over 100 to 160 degrees C. Be sure that surrounding parts and inserting material can withstand the temperature. If the surrounding part and material are kept under such conditions, they may deteriorate or produce harmful gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.), and such harmful gas may deteriorate the element. c Notice (Handling) PTFL/PTFM Series 1. Do not apply an excessive force to the lead. Otherwise, it may cause the junction between lead and element to break, or may crack the element. Therefore, holding the element side lead wire is recommended when lead wire is bent or cut. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as decline of characteristics or current leak. c Notice (Handling) PRG/PRF Series 1. When this product is operated, the temperature of some area may be over 100 to 150 degrees C. Be sure that surrounding parts and inserting material can withstand the temperature. If the surrounding parts and material are kept under such conditions, they may deteriorate or produce harmful gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.), and such harmful gas may deteriorate the element. 98 2. Do not assemble this product with air-sealing or resin casting. Such sealing may deteriorate element. R90E.pdf Mar.4,2014 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Chip Type PRG/PRF Series Package c Minimum Quantity Guide Quantity (pcs.) Part Number Paper Tape Embossed Tape PR*15_RC 10,000 - PR*18_RB 4,000 - PR*21_RA - 4,000 PR*21_RK - 3,000 c Tape Dimensions o1.00.1 Direction feed W0.1 o1.5 Y0 3.50.05 2.250.1 3.50.05 2.00.1 4.00.1 4.00.1 0.2 8.00.3 2.25 1.45 o1.0 W0.3 Y0 1.1 1.750.1 PR*21_RK Series: Embossed Tape 1.750.1 PR*21_RA Series: Embossed Tape W0.1 * Reference Value Direction feed Direction of feed o1.5 Y0 1.1 max. 3.50.05 8.00.3 *1.05 *0.65 * Reference Value 2.00.1 4.00.1 4.00.1 W0.1 o1.5 Y0 (1.85) *1.15 2.00.1 4.00.1 4.00.1 0.8 max. 3.50.1 8.00.3 o1.5 Y0 1.450.1 1.300.05 0.250.05 8.00.3 W0.1 2.00.05 4.00.1 1.750.1 PR*18_RB Series: Paper Tape 1.750.1 PR*15_RC Series: Paper Tape Direction feed (in mm) c Reel Dimensions Reel Dimensions o60 W1.0 Y0 2.00.5 o13.00.2 o21.00.8 9.0 W1.0 Y0 W0 13.01.0 o180 Y1.5 (in mm) 99 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Lead Type PTGL/PTF Series Package c Minimum Order Quantity (for Overcurrent Protection) Series Narrow Current Band 30V series Part Number PTGL04AS100K2N51B0 PTGL04AS100K2N51A0 PTGL05AS3R9K2B51B0 PTGL05AS3R9K2B51A0 PTGL07AS2R7K2B51B0 500 PTGL07AR250H4B51B0 500 PTGL07AR250H4B51A0 1500 PTGL09AR9R4H4B51A0 PTGL09AR9R4H4B51B0 1500 Min. Qty. PTGL05AR181M7P52B0 500 PTGL05AR181M7P52A0 1500 300 PTGL09AR220M6B52A0 1000 PTGL14AR100M6B72B0 150 - - PTGL12AS0R8K2B51A0 PTGL07AR330M6A51B0 500 - - PTGL04AS100K3B51B0 PTGL04AS100K3B51A0 PTGL09AR220M6C61B0 - - PTGL05AS6R8K3B51B0 PTGL05AS6R8K3B51A0 PTGL10AR150M6C61B0 - - 300 500 125V Series 140V Series 300 PTGL12AR100M6C01B0 250 - - PTGL09AS2R2K3B51A0 PTGL13AR6R8M6C01B0 200 - - PTGL12AS1R2K3B51A0 PTGL16AR5R6M6C01B0 150 - - PTGL04AS220K4B51B0 PTGL04AS220K4B51A0 - - PTGL07BB220N0B52A0 PTGL04AS220K4N51B0 PTGL04AS220K4N51A0 - - PTGL09AR390N0B52A0 - PTGL10BB120N0P52A0 PTGL07AS3R3K3B51B0 PTGL09AS2R2K3B51B0 PTGL05AS100K4B51B0 PTGL07AS5R6K4B51B0 300 500 PTGL07AS3R3K3B51A0 1500 250V Series - PTGL05AS100K4B51A0 PTGL07AS5R6K4B51A0 - - - PTGL12AS2R2K4B51A0 PTGL07AR820M9A51B0 - - PTGL04AS560K6B51A0 PTGL07AR700H8B52B0 PTGL07AR700H8B52A0 1000 PTGL05AS270K6B51A0 PTGL07AR650H8B52B0 PTGL07AR650H8B52A0 1000 PTGL07AS150K6B51A0 PTGL07AR450H8B52B0 PTGL07AR450H8B52A0 1000 PTGL07AR560M9A51B0 - - PTGL09AS3R3K4B51B0 PTGL09AS3R3K4B51A0 500 1000 PTGL05AR121M9N51B0 PTGL05AR181M9N51B0 PTGL07AS150K6B51B0 1000 - PTGL07AS5R6K4N51A0 300 PTGL05AR151H8P52A0 PTGL05AR151H8P52B0 1500 PTGL07AS5R6K4N51B0 1500 265V Series 500 300 PTGL09AS120K6B51B0 PTGL09AS120K6B51A0 PTGL09AS7R6K6B51B0 PTGL09AS7R6K6B51A0 PTGL09AR390M9C61B0 - - PTGL12AS4R7K6B51A0 PTGL09AR250H8B52B0 PTGL09AR250H8B52A0 1000 PTGL05AR1R0M1B51B0 PTGL05AR1R0M1B51A0 PTGL12AR270M9C01B0 - - PTGL06AR0R8M1B51B0 PTGL06AR0R8M1B51A0 PTGL12AR150H8B72B0 - - PTGL07ARR47M1B51A0 PTGL14AR180M9C01B0 - - - - - - 300 500 PTGL09ARR33M1B51B0 PTGL09ARR33M1B51A0 PTGL10ARR27M1B51B0 PTGL10ARR27M1B51A0 PTGL12AR0R2M1B51B0 300 - PTGL07BD100N2B51B0 PTGL07BD100N2B51A0 PTGL07BD6R8N2B51B0 PTGL07BD6R8N2B51A0 PTGL09BD4R7N2B51B0 500 2000 PTGL13AR100H8B72B0 PTGL18AR6R0H8B72B0 200 150 100 PTGL12AR0R2M1B51A0 PTGL14ARR15M1B51B0 PTGL09BD4R7N2B51A0 - 1500 c Minimum Order Quantity (for Inrush Current Suppression) PTGL07AS121M0N51B0 Less than 100F PTGL07AS181M0N51B0 Series PTGL07AS201M0N51B0 500 PTGL07AS121M0N51A0 1000 500 PTGL07AS181M0N51A0 1000 500 PTGL07AS201M0N51A0 1000 PTGL09BD3R3N2B51B0 PTGL09BD3R3N2B51A0 PTGL14AS470H0B02BZ 150 - - PTGL09BD2R2N2B51B0 PTGL09BD2R2N2B51A0 PTGL16AS330H0B02BZ 150 - - PTGL04AR130H2B51B0 PTGL04AR130H2B51A0 PTGL16AS470H0B02BZ 150 - - PTGL16AS680H0B02BZ 150 - - PTGL16AS101H0B02BZ 150 - - PTGL07AR4R6H2B51B0 500 PTGL07AR4R6H2B51A0 1500 100F or more Series PTGL09AR1R8H2B51B0 PTGL09AR1R8H2B51A0 PTGL12AR1R2H2B51B0 - - PTGL20AS330H0D02BZ 100 - - - PTGL20AS470H0D02BZ 100 - PTGL13AR0R8H2B71B0 300 PTGL07BD470N3B51B0 PTGL07BD330N3B51B0 PTGL07BD220N3B51B0 PTGL07BD470N3B51A0 500 PTGL07BD330N3B51A0 PTGL07BD220N3B51A0 PTGL07BD150N3B51B0 PTGL07BD150N3B51A0 PTGL07AR220M3P51B0 PTGL07AR220M3P51A0 PTGL07AR8R2M3P51B0 PTGL09AR150M3B51B0 56V Series 80V Series Part Number PTGL05AR550H4P51A0 PTGL09AR220M6B52B0 PTGL07ARR47M1B51B0 32V Series Min. Qty. PTGL05AR550H4P51B0 PTGL09AS1R2K2B51A0 PTGL12AS4R7K6B51B0 30V Series Part Number Ammo Pack Taping Type PTGL07AS1R8K2B51A0 PTGL05AS270K6B51B0 24V Series Bulk Type PTGL09AS1R2K2B51B0 PTGL04AS560K6B51B0 16V Series PTGL07AS2R7K2B51A0 Min. Qty. Series PTGL07AS1R8K2B51B0 PTGL12AS2R2K4B51B0 Narrow Current Band 140V series Part Number PTGL04AS100K2B51A0 PTGL12AS1R2K3B51B0 Narrow Current Band 60V series Min. Qty. PTGL04AS100K2B51B0 PTGL12AS0R8K2B51B0 Narrow Current Band 51V series Ammo Pack Taping Type Bulk Type PTGL09AR150M3B51A0 PTGL10AR3R9M3P51A0 PTGL09AR4R7M3B51B0 PTGL09AR4R7M3B51A0 PTGL14AR3R3M3B71B0 c Minimum Order Quantity (for Overheat Sensing) PTF Series PTFL Series 400 - - PTFM Series 200 - - PTGL07AR8R2M3P51A0 500 PTGL10AR3R9M3P51B0 PTGL10AR3R9M3B51B0 1500 300 1500 PTGL10AR3R9M3B51A0 - Continued on the following page. 100 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Lead Type PTGL/PTF Series Package Continued from the preceding page. c Narrow Current Band 30 - 140V Series / 16 - 80V Series / Inrush Current Suppression Taping Dimensions P2 S P h1 D h2 l oD F d 0 P1 W W0 L W1 H0 W2 e H2 T t2 t1 P0 Code Dimensions (mm) Pitch of Component Item P 12.7 Pitch of Sprocket Hole P0 12.70.3 Lead Spacing F 5.0+0.8 -0.3 3.850.8 Length from Hole Center to Lead P1 Length from Hole Center to Component Center P2 6.351.3 Body Diameter D Please see in Ratings Body Thickness T Please see in Ratings Deviation along Tape, Left or Right Defect S 1.5 Carrier Tape Width W 18.00.5 Position of Sprocket Hole W1 9.0+0.5 -0.75 Lead Distance between Reference and Bottom Planes H0 16.01.0 H2 6.0 max. I +0.5 to -1.0 Protrusion Length Diameter of Sprocket Hole D0 4.00.2 Lead Diameter d Please see in Ratings Total Tape Thickness t1 0.60.3 Total Thickness of Tape and Lead Wire t2 2.0 max. h1, h2 1.5 max. Deviation across Tape Portion to cut in Case of Defect L Deviation in the feeding direction Including the inclination caused by lead bending Deviation of tape width 11.0+0 -2.0 Hold down Tape Width W0 Hold down Tape Position W2 4.0 max. e Up to the center of crimp Coating Extension on Lead Note Tolerance is determined by S. 11.0 min. Continued on the following page. 101 R90E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.4,2014 Lead Type PTGL/PTF Series Package Continued from the preceding page. c 125/250/265V Series Taping Dimensions S P P2 h1 h2 T l oD F d 0 P1 W W0 L W1 H0 W2 e H2 D t2 t1 P0 Code Dimensions (mm) Pitch of Component Item P 12.7 Pitch of Sprocket Hole P0 12.70.3 Lead Spacing F 5.0+0.8 -0.3 3.850.8 Length from Hole Center to Lead P1 Length from Hole Center to Component Center P2 6.351.3 Body Diameter D Please see Ratings Body Thickness T Please see Ratings Deviation along Tape, Left or Right S 1.5 Carrier Tape Width W 18.00.5 Position of Sprocket Hole W1 9.0+0.5 -0.75 Lead Distance between Reference and Bottom Planes H0 16.01.0 H2 6.0 max. I W0.5 to Y1.0 Protrusion Length Diameter of Sprocket Hole D0 4.00.2 Lead Diameter d 0.60.05 Total Tape Thickness t1 0.60.3 Total Thickness of Tape and Lead Wire t2 2.0 max. Deviation across Tape Portion to cut in Case of Defect L 1.5 max. 11.0+0 -2.0 Hold down Tape Width W0 Hold down Tape Position W2 4.0 max. e Up to the center of crimp Coating Extension on Lead 102 h1, h2 11.0 min. Note Tolerance is determined by S. Deviation in the feeding direction Including the inclination caused by lead bending. Deviation of tape width. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R90E.pdf Mar.4,2014