FM Series for Automatic Assembly The FM series includes small, resin-molded electric double-layer capacitors suitable for automatic assembly. These capacitors are ideal as long-time backup devices for minute-current loads in VCRs, audio systems, cordless telephones, and compact electronic systems. (FME types are backup devices adaptable to current consumption mA level.) Features * High adaptability to automatic assembly * Can be cleaned * Excellent voltage holding characteristics ideal for long-time supply of 1 A to several hundred A (Except 3.5 V type, FME type) * Space saving Applications Backup of CMOS microcomputers, static RAMs, and DTSs Part Number System * Bulk FM 0H 473 Z Capacitance tolerance Z: +80%, -20% Nominal capacitance First two digits represent significant figures. Third digit specifies number of zeros to follow F code. Maximum operating voltage 0H: 5.5 Vdc 0V: 3.5 Vdc 0 J: 6.5 Vdc Super Capacitor: FM series FME type FMR type FMC type * Tape (Ammo Pack) FM0H223Z TP 16 Height of component from tape center. 16: 16 mm, 18: 18 mm Tape packaging Part number of bulk packaging Number of Packed Capacitors Tape: 1000 pcs./box 24 Super Capacitors Vol.05 Markings Negative polarity identification NT Nominal capacitance Maximum rated voltage 5.5 V 473 E - K1 E:FME type Marking R:FMR type Marking + Date code Polarity Dimensions And Standard Ratings 10.5 0.5 T 0.5 (0.413) 11.5 0.5 (0.453) 0.4 (0.016) 5 1 (0.197) 0.5 0.1 0.4 0.1 (0.020) Unit: mm (inch) (0.016) 5 0.5 (0.197) 5.5 V Type Part Number Ammo pack Max. Voltage Max. ESR Max. Current Rated Nominal Capacitance at 30 Holding (at 1 kHz) Voltage Charge System Discharge System minutes Characteristic () (VDC) (mA) Min. (V) (F) (F) T mm (inch) Weight g (oz) FM0H103Z FM0H103ZTP ( ) 5.5 0.01 0.014 300 0.015 4.2 5.0 (0.197) 1.3 (0.046) FM0H223Z FM0H223ZTP ( ) 5.5 0.022 0.028 200 0.033 4.2 5.0 (0.197) 1.3 (0.046) FM0H473Z FM0H473ZTP ( ) 5.5 0.047 0.06 200 0.071 4.2 5.0 (0.197) 1.3 (0.046) FM0H104Z FM0H104ZTP ( ) 5.5 0.10 0.13 100 0.15 4.2 6.5 (0.256) 1.6 (0.056) FM0H224Z FM0H224ZTP ( ) 5.5 - 0.22 100 0.33 4.2 6.5 (0.256) 1.6 (0.056) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 34.) Super Capacitors Vol.05 25 3.5 V Type Ammo pack Max. Rated Voltage (VDC) FM0V473Z FM0V473ZTP ( ) FM0V104Z FM0V224Z Max. Current at 30 minutes (mA) T mm (inch) Weight g (oz) Charge System (F) Discharge System (F) Max. ESR (at 1 kHz) () 3.5 0.047 0.06 200 0.042 5.0 (0.197) 1.3 (0.046) FM0V104ZTP ( ) 3.5 0.10 0.13 100 0.090 5.0 (0.197) 1.3 (0.046) FM0V224ZTP ( ) 3.5 0.22 0.30 100 0.20 6.5 (0.256) 1.6 (0.056) Part Number Nominal Capacitance Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 34.) FME Type ( Backup Large Current , mA Order ) Part Number Ammo pack Max. Rated Voltage (VDC) Charge System (F) Discharge System (F) Max. ESR (at 1 kHz) () Nominal Capacitance Max. Current at 30 minutes (mA) T mm (inch) Weight g (oz) FME0H223Z FME0H223ZTP ( ) 5.5 0.022 0.028 40 0.033 5.0 (0.197) 1.3 (0.046) FME0H473Z FME0H473ZTP ( ) 5.5 0.047 0.06 20 0.071 5.0 (0.197) 1.3 (0.046) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 34.) FMR Type ( Extended Operating Temperature range ) Part Number Ammo pack FMR0H473Z FMR0H473ZTP ( ) Max. Rated Voltage (VDC) 5.5 Charge System (F) Discharge System (F) Max. ESR (at 1 kHz) () 0.047 0.062 200 Nominal Capacitance Max. Current at 30 minutes (mA) Voltage Holding Characteristic Min.(V) T mm (inch) Weight g (oz) 0.071 4.2 6.5 1.6 Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 34.) FM 6.5V Type Ammo pack Max. Rated Voltage (VDC) FM0J473ZTP ( ) 6.5 Part Number FM0J473Z Charge System (F) Discharge System (F) Max. ESR (at 1 kHz) () 0.047 0.062 200 Nominal Capacitance Max. Current at 30 minutes (mA) T mm (inch) Weight g (oz) 0.085 6.5 1.6 Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 34.) 26 Super Capacitors Vol.05 Specifications 5.5 V Type Standard Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 5.5 VDC Nominal Capacitance Range See standard list Capacitance Allowance +80%, -20% Equivalent Series Resistance See standard list Current (30-minutes value) See characteristics measuring method. See characteristics measuring method. See characteristics measuring method. See standard list Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality. Capacitance 50% or higher of initial value Equivalent series resistance 4 or less times initial value Capacitance 200% or below of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) 1.5 CV (mA) or below Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Capacitance Within 20% of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) Satisty initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Solderability Satisty initial standard value Current (30-minute value) Appearance Capacitance Soldering Heat Resistance Satisty initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Humidity Resistance High Temperature Load Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10sec. Conforms to 8.2.3 Frequency : 10 to 55 Hz Test duration : 6 hours Conforms to 8.4 Solder temperature: 230 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Appearance No obvious abnormality Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Capacitance Within 20% of initial value Conforms to 9.5 Equivalent series resistance 1.2 or less times initial standard value Temperature: Current (30-minute value) 1.2 or less times initial standard value Relative humidity: 90 to 95% RH Test duration: 240 8 hours Equivalent series resistance Satisty initial standard value Current (30-minute value) Appearance No obuious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Voltage Holding Characteristics Conforms to 7.14 Surge Voltage: 6.3 V Temperature: 70 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.01F: 1500 0.22F: 56 0.022 F: 560 0.047 F: 300 0.10 F: 150 Discharge resistance: 0 No obvious abnormality 3/4 or more of the pin surface should be covered with new solder Equivalent series resistance Test Conditions Conforming to JIS C 5102-1994 40 2C Conforms to 9.10 Temperature: 70 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000+48 0 hours Charging condition Voltage applied: 5.0 VDC Series resistance: 0 Charging time: 24hours Storage Time: 24hours Temperature:Lower than 25C Humidity:Lower than 70%RH Voltage between terminal leads higher than 4.2 V (Self Discharge ) Super Capacitors Vol.05 27 Specifications 3.5 V Type Standard Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 3.5 VDC Nominal Capacitance Range See standard list Capacitance Allowance +80%, -20% Equivalent Series Resistance See standard list Current (30-minutes value) See characteristics measuring method. See characteristics measuring method. See characteristics measuring method. See standard list Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance 50% or higher of initial value Equivalent series resistance 4 or less times initial value Capacitance 200% or below of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) 1.5 CV (mA) or below Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Capacitance Within 20% of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) Satisty initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Solderability Satisty initial standard value Current (30-minute value) Appearance Capacitance Soldering Heat Resistance Satisty initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Equivalent series resistance Humidity Resistance High Temperature Load 28 Super Capacitors Vol.05 Satisty initial standard value Current (30-minute value) Appearance Conforms to 7.14 Surge voltage: 4.0 V Temperature: 70 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 0.10 F: 150 0.22 F: 56 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10 sec Conforms to 8.2.3 Frequency: 10 to 55 Hz Test duration: 6 hours No considerable abnormality 3/4 or more of the pin surface should be covered with new solder Equivalent series resistance Test Conditions Conforming to JIS C 5102-1994 No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obvious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Conforms to 8.4 Solder temperature: 230 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from for the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from for the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 3.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Specifications FME Type Standard Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 5.5 VDC Nominal Capacitance Range See standard list Capacitance Allowance +80%, -20% Equivalent Series Resistance See standard list Current (30-minutes value) See standard list Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance 50% or higher of initial value Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Equivalent series resistance 3 or less times initial value Capacitance 150% or below of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) 1.5 CV (mA) or below Capacitance Within 20% of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) Satisty initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Should satisty initial standard value Current (30-minute value) Appearance Test Conditions Conforming JIS C 5102-1994 See characteristics measuring method. See characteristics measuring method. See characteristics measuring method. Conforms to 7.14 Surge Voltage: 7.4 V Temperature: 70 2C Chargs: 30 sec. Dischargs: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.022 F: 560 0.047 F: 300 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10 sec Conforms to 8.2.3 Frequency: 10 to 55 Hz Test duration: 6 hours There should be no considerable abnormality Conforms to 8.4 Solderability 3/4 or more of the pin surface should be covered with new solder Capacitance Soldering Heat Resistance Equivalent series resistance Satisty initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Equivalent series resistance Current (30-minute value) Appearance Humidity Resistance High Temperature Load Satisty initial standard value No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obvious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Solder temperature: 230 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Super Capacitors Vol.05 29 Specifications FMR Type Standard Item Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Range Capacitance Allowance Equivalent Series Resistance Current (30-minutes value) -40C to +85C 5.5 VDC See standard list +80%, -20% See standard list See standard list Capacitance Equivalent series resistance Current (30-minute value) More than 90% of initial requirement Not to exceed 120% of initial requirement Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance Equivalent series resistance Capacitance Equivalent series resistance Capacitance Equivalent series resistance Current (30-minute value) Capacitance Equivalent series resistance Current (30-minute value) 50% or higher initial value 4 or less times initial value 30% or higher initial value 7 or less times initial value 200% or higher initial value Satisfy initial standard value 1.5 CV (mA) or below Within 20% of initial standard value Satisfy initial standard value Satisfy initial standard value See characteristics measuring method. See characteristics measuring method. See characteristics measuring method. Surge Voltage Phase 2 Phase 3 Temperature Variation of Characteristics Phase 5 Phase 6 Test Conditions Conforming to JIS C 5102-1994 Conforms to 7.14 Surge Voltage: 6.3 V Temperature: 85 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +85 2C Phase 6: +25 2C Lead Strengh (Tensile) No loosening nor permanent damage of the leads Conforms to 8.1.2 (1) 1 kg 10sec. Vibration Resistance Capacitance Equivalent series resistance Current (30-minute value) Appearance Conforms to 8.2.3 Frequency : 10 to 55 Hz Test duration : 6 hours Solderability Soldering Heat Resistance Temperature Cycle Humidity Resistance High Temperature Load Satisty initial standard value No obvious abnormality 3/4 or more of the pin surface should be covered with new solder. Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Satisty initial standard value No obvious abnormality Satisty initial standard value No obvious abnormality Within 20% of initial value 1.2 or less times initial standard value 1.2 or less times initial standard value No obuious abnormality Within 30% of initial value Twice or less times initial standard value Twice or less times initial standard value No obvious abnormality Voltage Holding Characteristics Conforms to 8.4 Solder temperature: 230 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -40C normal temperature +85C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 85 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Charging condition Voltage applied: 5.0 VDC Series resistance: 0 Charging time: 24hours Storage Time: 24hours Temperature:Lower than 25C Humidity:Lower than 70%RH Voltage between terminal leads higher than 4.2 V (Self Discharge ) 30 Super Capacitors Vol.05 Specifications FM 6.5V Type Standard Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 6.5 VDC Nominal Capacitance Range See standard list Capacitance Allowance +80%, -20% Equivalent Series Resistance See standard list Current (30-minutes value) See characteristics measuring method. See characteristics measuring method. See characteristics measuring method. See standard list Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance 50% or higher of initial value Equivalent series resistance 4 or less times initial value Capacitance 200% or below of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) 1.5 CV (mA) or below Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Capacitance Within 20% of initial value Equivalent series resistance Satisty initial standard value Current (30-minute value) Satisty initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Solderability Satisty initial standard value Current (30-minute value) Appearance 3/4 or more of the pin surface should be covered with new solder Equivalent series resistance Satisty initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Humidity Resistance High Temperature Load Equivalent series resistance Conforms to 7.14 Surge Voltage: 7.4 V Temperature: 70 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10sec. Conforms to 8.2.3 Frequency : 10 to 55 Hz Test duration : 6 hours No obvious abnormality Capacitance Soldering Heat Resistance Test Conditions Conforming to JIS C 5102-1994 Satisty initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obuious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Conforms to 8.4 Solder temperature: 230 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 6.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Super Capacitors Vol.05 31 FMC Type Markings Negative polarity identification NT Nominal capacitance Maximum rated voltage 5.5 V 473 C - C:FMC type Marking + K1 Date code Polarity Dimensions And Standard Ratings b 0.5 T 0.5 a 0.5 0.4 5 1 d1 0.1 d 2 0.1 Unit: mm 5 0.5 Part Number Ammo pack FMC0H473Z FMC0H473ZTP( ) FMC0H104Z FMC0H104ZTP( ) FMC0H334Z FMC0H334ZTP( ) Max. Nominal Capacitance Max. ESR Max. Current Voltage a b T d1 d2 Weight at 30 Rated Holding Voltage Charge System Discharge System (at 1 kHz) minutes Characteristic ( mA ) (F) Min. ( V ) (mm) (mm) (mm) (mm) (mm) ( g ) (VDC) ( F ) () 5.5 5.5 5.5 0.047 0.10 - more than 0.062 less than less than 100 0.071 4.2V 11.5 10.5 5.0 0.5 0.4 1.3 0.13 less than less than more than 4.2V 11.5 10.5 6.5 0.5 0.4 1.6 0.33 less than more than 15.0 14.0 9.0 0.6 0.6 3.5 50 25 0.15 less than 0.50 4.2V Chip parts applicable to treatment in bond hardening furnace (160 5C for 120 10 seconds) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 34 or 35.) 32 Super Capacitors Vol.05 Specifications FMC Type Standard Item Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Range Capacitance Allowance Equivalent Series Resistance Current (30-minutes value) -25C to +70C 5.5 VDC 0.047F , 0.10F , 0.33F +80%, -20% See standard list See standard list Capacitance Equivalent series resistance Current (30-minute value) More than 90% of initial requirement Not to exceed 120% of initial requirement Not to exceed 120% of initial requirement Appearance No obvious abnormality. Capacitance Equivalent series resistance Capacitance Equivalent series resistance Current (30-minute value) Capacitance Equivalent series resistance Current (30-minute value) 50% or higher of initial value 4 or less times initial value 200% or below of initial value Satisty initial standard value 1.5 CV (mA) or below Within 20% of initial value Satisty initial standard value Satisty initial standard value See characteristics measuring method. See characteristics measuring method. See characteristics measuring method. Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tenile) No loosening nor permanent damage of the leads Vibration Resistance Capacitance Equivalent series resistance Current (30-minute value) Appearance Solderability Soldering Heat Resistance Temperature Cycle Humidity Resistance High Temperature Load Voltage Holding Characteristics (Self Dischage) Should satisty initial standard value Conforms to 7.14 Surge Voltage: 6.3 V Temperature: 70 2C Chargs: 30 sec. Dischargs: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 0.1 F: 150 0.33 F: 51 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10 sec Conforms to 8.2.3 Frequency: 10 to 55 Hz Test duration: 6 hours There should be no considerable abnormality 3/4 or more of the pin surface should be covered with new solder Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Test Conditions Conforming to JIS C 5102-1994 Satisty initial standard value No obvious abnormality Satisty initial standard value No obvious abnormality Within 20% of initial value 1.2 or less times initial standard value 1.2 or less times initial standard value No obvious abnormality Within 30% of initial value Twice or less times initial standard value Twice or less times initial standard value No obvious abnormality Voltage between terminal leads higher then 4.2V Conforms to 8.4 Solder temperature: 230 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 +48 Test duration: 1000 0 hours Voltage applied: 5.0 VDC Charging Series resistance: 0 condition Charging time: 24hours Storage Time: 24hours Temperature:Lower than 25C Humidity:Lower than 70%RH Super Capacitors Vol.05 33 Taping Specification (Ammo pack) P2 (except FMC0H334ZTP( )) P h b a c - F + W4 t3 W0 W1 L H P1 + W2 - W t2 P0 D0 t1 Unit : mm Symbol Value Tolerance Component Height Item a 11.5 0.5 Component Width b 10.5 0.5 Component Thickness C - 0.5 Lead-wire Width W4 0.5 0.1 Lead-wire Thickness t3 t3 0.4 0.1 Pitch of Component P 12.7 1.0 Sprocket Pitch P0 12.7 0.3 Sprocket Hole Center to Lead P1 3.85 0.7 Sprocket Hole to Component Center P2 6.35 1.3 Lead Spacing F 5.0 0.5 Component Alignment h 2.0 Max. - Tape Width W 18.0 +1.0 - 0.5 Hold-down tape Width W0 12.5 Min. - Sprocket Hole Position W1 9.0 0.5 Hold-down Tape Position W2 3.0 Max. - 16.0 0.5 Height of Component from Tape Center H Sprocket Hole Diameter D0 Total Tape Thickness Length of Shipped Lead Packing Quantity 1000 pcs. / box 34 Super Capacitors Vol.05 18.0 0.5 4.0 0.2 t1 0.7 0.2 t2 1.5 Max. - L 11.0 Max. - Remarks 5.5 V Type: 5.0/0.010 F~0.047 F, 6.5/0.10 F~0.22 F 3.5 V Type: 5.0/0.047 F~0.10 F, 6.5/0.22 F FME Type: 5.0/0.022 F~0.047 F 6.5 Type: 6.5/0.022 F FMR Type: 6.5/0.047 F FMC Type: 5.0/0.047 F, 6.5/0.10 F Including tiltiing caused by bending of lead wire No protrusion of tape Taping Specifications [FMC0H334ZTP( )] P2 P h b a c + - F W4 t3 W W0 W1 L H P1 + W2 - P0 D0 t2 t1 Unit : mm Item Symbol Value Tolerance Component Height a 15.0 0.5 Component Width b 14.0 0.5 c 9.0 0.5 W4 0.6 0.1 Component Thickness Lead-wire Width Lead-wire Thickness t3 0.6 0.1 Pitch of Component P 25.4 1.0 Sprocket Pitch P0 12.7 0.3 Sprocket Hole Center to Lead P1 3.85 0.7 Sprocket Hole to Component Center P2 6.35 1.3 Lead Spacing F 5.0 0.5 Component Alignment h 2.0 Max. - Tape Width W 18.0 +1.0 - 0.5 Hold-down tape Width W0 12.5 Min. - Sprocket Hole Position W1 9.0 0.5 Hold-down Tape Position W2 3.0 Max. - 16.0 0.5 Height of Component from Tape Center H Sprocket Hole Diameter D0 Total tape thickness Length of Shipped Lead 18.0 0.5 4.0 0.2 t1 0.67 0.2 t2 1.7 Max. - L 11.0 Max. - Remarks Including tiltiing caused by bending of lead wire No protrusion of tape Packing Quantity 400 pcs. / box Super Capacitors Vol.05 35 Packing dimensions Top View Outlet SUPER CAPACITOR 350 Max. Outlet 350 Max. Side View UP Label 55 Max. Part number Quantity Date code Marking of Box Marking shows the following items. (a) Terminal direction (b) Part number (c) Quantity (d) Date code (e) Company logo Packing Quantity : 1000 pcs. / box (Except FMC0H334ZTP( )) 400 pcs. / box (FMC0H334ZTP( )) 36 Super Capacitors Vol.05