0 9 8 7 6 | 5 | P 3 2 D+0.05 B J ta] --0.50:006 TYP | boooooooononond y CKT No. 1 (0.18) MXL2 0.40] 0.20+0.05 TYP X = r [0.40 asot | |os0 SECTION X-X 1 b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 p AIo.10 C NOTE: . = mz = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 1, MATERIAL: == |sympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC Oc PROJECTION HOUSING: PA46 GLASS FILLED, UL94V-0, COLOR: NATURAL sas mm INCH _| DRAWN BY DATE TITLE TERMINAL: COPPER ALLOY oa <= iz/G7-0 [CPLACESIE=-- [5 --- LalAo 2006/05/05 0.50MM PITCH, FPC CONN. 2. PLATING: S Hs aE 3 PLACES|t--- _[t--~ [CHECKED BY DATE NON-ZIF, SMT 1) 0.10 Lm MIN. GOLD PLATING OVER NICKEL PLATING OVERALL mEse i \/-0 2 PLACES 0.15 + BOKOK ~ 2006/06/06 - - Sete TPLACE [f777 [+777 2) 1-3 Hm TIN-BISMUTH PLATING OVER NICKEL PLATING OVERALL |S & 3 &| W-0 0 PLACE TE + TLIM 2006/06/06 molex 3. PRODUCT SPECIFICATION: PS-78119-001 D SSae ANGULAR + 3 MATERIAL NO- DOCUMENT-NO- SHEET NO. 4. PRODUCT ARE PACKED IN TAPE & REEL. moet DRAET WHERE APPLICABLE] SEE TABLE SD-78127-001 10F 7 WOO = MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B rf WITHIN DIMENSIONS A SINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 6 | 5 4 | 3 | 2 | 10 9 8 7 6 5 4 3 2 1 F E Ph B :0.05 SUPPORTING TAPE CKT No. 1 N] 03028 [03038 [035% [035% P[0.5020.03 |0.5020.05 | 0.50+0.02 | 0.50+0.05 } M|0.50+0.10 | 0.50+0.08 | 0.50+0.12 | 0.50+0.10 B:0.03 | B+0.05 | Bs0.03 | B+0.05 D A A a 6 : : : one A AAA Z 1 2 1 2 {| DAY ABABWAe = FFC EPC r AU AAAAY 3 4.00 +0.10 y) y) y y y) y) Wy yy 3 WWMMnAwewaw ~ 1.60 0.10 ! HW oy iy YY % y) WY WY Ha VA AA A A R0.30(2X)_ ZA_VA 44 Vv 4A t 4 (FPC ONLY) | c _| LL P 0,30 +0.05 0.40 20.05 |. os0 20.05 M B APPLICABLE FPC/FFC W +#0.07 RECOMMENDED PCB LAYOUT B mm = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ==S) |sympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC Oc PROJECTION J Ses mm INCH __| DRAWN BY DATE TITLE a == 8267-0 [PLACES|E-- |=--__LOIAO 2006/05/05 0.50MM PITCH, FPC CONN. S<=.|f 3 PLACES|#---_[t--- __ [CHECKED BY DATE NON-ZIF, SMT = BS\5\\/-0 [2 PLACES|+0.15 _[+--- BOKOK 2006/06/06 Slz=|u 1 PLACE [E--- |i--- APPROVED BY DATE ANS=S/|W/-0 DPace t TLIM 2006/06/06 molex A Lu 7 a x x 2 S 5 a Pa ANGULAR + 30 MATERIAL NO. DOCUMENT NO. SHEET NO, HOeLE DRAFT WHERE APPLICABLEL_SEE TABLE SD-78127-001 2 0F 7 fe a tl _ MUST REMAIN SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B a WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 4 7 | 6 5 | P | 3 | 2 | 1 Rev. G 2012/01/1110 9 8 7 6 5 4 3 2 1 GOLD PLATING TERMINAL ASSEMBLY PART NUMBERS ASSY P/N ASSY P/N W/O PACKAGING CKT | DIMA DIM B DIM C DIM D eae W/O PACKAGING CKT | DIM A DIM B DIM C DIM D ee 78127-0108 10 7.10 4.50 6.40 5.60 78127-0318 31 17.60 15.00 16.90 16.10 78127-0118 "1 7.60 5.00 6.90 6.10 78127-0328 32 18.10 15.50 17.40 16.60 78127-0128 12 8.10 5.50 7.40 6.60 78127-0338 33 18.60 16.00 17,90 17.10 78127-0138 13 8.60 6.00 7.90 7.10 78127-0348 34 19.10 16.50 18.40 17.60 78127-0148 14 9.10 6.50 8.40 7.60 78127-0358 35 19,60 17.00 18.90 18.10 78127-0158 5 9.60 7.00 8.90 8.10 78127-0368 36 20.10 17.50 19.40 18.60 1 78127-0168 16 10.10 7.50 9.40 8.60 78127-0378 37 20.60 18.00 19.90 19.10 78127-0178 17 10.60 8.00 9.90 9.10 78127-0388 38 21.10 18.50 20.40 19.60 78127-0188 18 11.10 8.50 10.40 9.60 78127-0398 39 21.60 19.00 20.90 20.10 78127-0198 19 11.60 9.00 10.90 10.10 4 78127-0408 40 22,10 19.50 21.40 20.60 78127-0208 20 12.10 9.50 11.40 10.60 78127-0218 21 12.60 10.00 11.90 11.10 78127-0228 22 13.10 10.50 12.40 11.60 78127-0238 23 13.60 11.00 12.90 12.10 78127-0248 24 14.10 11.50 13.40 12.60 78127-0258 25 14.60 12.00 13.90 13.10 78127-0268 26 13.10 12.50 14.40 13.60 78127-0278 27 15.60 13.00 14.90 14.10 78127-0288 28 16.10 13.50 15.40 14.60 78127-0298 29 16.60 14.00 15.90 15.10 78127-0308 30 17.10 14.50 16.40 15.60 b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 - m = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ==] Isympo_s| (UNLESS SPECIFIED) MM ONLY NTS METRIC | Cl eRoyection = = = mm INCH DRAWN BY DATE TITLE o SS 5/Z\\G/=0 [CPLACES|E--- _[#--- VLQIAO 2006/05/05 0.50MM PITCH, FPC_ CONN. o <= _|i 3 PLACES|It--- |+-- CHECKED BY DATE NON-ZIF, SMT 2 = 2 S|5|V/-0 [2 PLACES|#0.15 [+--- BOKOK 2006/06/06 ae 2S =|" TPLACE [E--- Jt--- APPROVED BY DATE mS S=S} |\6/-0 [oO Prace + TLIM 2006/06/06 molex 2 S Sas ANGULAR + 3 MATERIAL NO. DOCUMENT NO. SHEET NO. ooeee DRAFT WHERE APPLICABLE|_SEE TABLE SD-78127-001 3 OF 7 Fuoao <_ SIE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B wy WITHIN DIMENSIONS A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 6 | 5 | 4 | 3 | 2 | 110 9 8 7 6 5 4 3 2 1 Rev. G 2012/01/11 F TIN-BISMUTH PLATING TERMINAL ASSEMBLY PART NUMBERS E ASSY P/N ASSY P/N w/o PACKAGING] CT | OM A DMB | DMC | DMD ee w/o PACKAGING) CKT | DMA DMB | DMC | DMD ee __| 78127-0109 10 7.10 4.50 6.40 5.60 78127-0319 31 | 17.60 15.00 16.90 16.10 78127-0119 1 7.60 5.00 6.90 6.10 78127-0329 32 | 18.10 15.50 17.40 16.60 78127-0129 12 8.10 5.50 7.40 6.60 78127-0339 33 | 18.60 16.00 17.90 17.10 78127-0139 B 8.60 6.00 7.90 7.10 78127-0349 34 | 19.10 16.50 18.40 17.60 D 78127-0149 14 9.10 6.50 8.40 7.60 78127-0359 35 | 19.60 17.00 18.90 18.10 78127-0159 5 9.60 7.00 8.90 8.10 78127-0369 36 | 20.10 17.50 19.40 18.60 2 78127-0169 16 10.10 7.50 9.40 8.60 78127-0379 37 | 20.60 18.00 19.90 19.10 78127-0179 17 | 10.60 8.00 9,90 9.10 78127-0389 38 | 2110 18.50 20.40 19.60 78127-0189 18 11.10 8.50 10.40 9.60 78127-0399 39 | 21.60 19.00 20.90 20.10 78127-0199 19 11.60 9.00 10.90 10.10 > 78127-0409 40 | 22.10 19.50 21.40 20.60 78127-0209 20 | 12.10 9.50 11.40 10.60 78127-0219 21 | 12.60 10.00 11.90 11.10 c 78127-0229 22 | 13.10 10.50 12.40 11.60 78127-0239 23 | 13.60 41.00 12.90 12.10 78127-0249 24 | 14.10 11.50 13.40 12.60 | 78127-0259 25 | 14.60 12.00 13.90 13.10 78127-0269 26 | 15.10 12.50 14.40 13.60 78127-0279 27 | 15.60 13.00 14.90 14.10 78127-0289 28 | 16.10 13.50 15.40 14.60 B 78127-0299 29 | 16.60 14.00 15.90 15.10 78127-0309 30 | 17.10 14.50 16.40 15.60 an DIMENSION STYLE SCALE DESIGN UNITS SS5) AN ER NS | WO ne | were OCED ANE | eeoeo mm INCH DRAWN BY DATE TITLE a = 8217-0 [PLACES|IE-- [=--__"LOIAO 2006/05/05 0.50MM PITCH, FPC CONN. Sfeala 3 PLACES|#--- [4-- _ [CHECKED BY DATE NON-ZIF, SMT m= 2 a\o|W/-O [2 PLACES|0.15 _|[4--- _ BOKOK 2006/06/06 Sa tez|4 T PLACE [t--- _|+--- [APPROVED BY DATE A GSSZ5| \/-0 orca e = TLIM 2006/06/06 molex S She ANGULAR + 3 MATERIAL NO. DOCUMENT NO. SHEET NO, Oe Se DRAFT WHERE APPLICABLEL_ SEE TABLE SD-78127-001 4 OF 7 fei a = _ | SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B a WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 5 8 7 | 6 | 5 4 | 3 | 2 | 110 9 8 EMBOSSED TYPE A PO SOOO OOOO OED CUSTOMER PULL OUT DIRECTION <=> NOTES: 4. LEADER AND TRAILER TAPE Yiu 1.10 re EMBOSSED TYPE B = TYP @ 150*010 PILOT HOLE eo SCGOCECHEOCHSEOHR a7 Oo OO 0.40 iL SECTION Y-Y 0.20 20.05 | 4.00 2.60 7 [7 7.39 = [= 12.00 TYP=| tt \ eran 1 IF 4 LL a Rev. G 2012/01/11 160 MIN. 390 MIN NP a P Toe Tbe SECTION Z-Z TRAILER COMPONENT PULL OUT DIRECTION 160 MIN. LE Ey an TAIL PART (EMPTY) EMPTY) PART R=] Quality] GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS Oc] THIRD ANGLE 2. PEELING OFF FORCE OF THE TOP TAPE: 20-80f. S35 SYMBOLS} (UNLESS SCH ORAWN MM ONLY = ae METRIC PROJECTION (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) 2 SR E]ZNG/-0 [ZPLACES|E--- [=--- _VLOIAO 2006/05/05 090M ON SIE i CONN. PEEL OFF DIRECTION <= lh 3 PLACES |+--- +--- CHECKED BY DATE - : 15 T=BSSeN/-O0 [2 PLAceS|+0.15 _|4--- BOKOK 2006/06/06 MAX. - 5 e2zS|u +--- |4t--- APPROVED BY DATE aneeeezlt T PLACE | PULL OUT DIRECTION nS Sees \G/=0 [oO PLACE E + TLIM 2006/06/06 momex 3. PACKAGING STANDARD IS AS PER EIA-481. +2208 ANGULAR 3 ___manar nomen We ae 4. TAPE & REEL QUANTITY = 1000 PCS/REEL ogee DRAFT WHERE APPLICABLE| SEE TABLE SD-78127-001 2 OF 7 HI OQ =o} MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B i WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 | 3 7 | 6 5 | | 3 | 2 | 110 9 8 7 6 5 4 3 2 1 F GOLD PLATING TERMINAL ASSEMBLY PART NUMBERS E ASSY P/N ASSY P/N EMBOSSED ASSY P/N ASSY P/N EMBOSSED PACKED IN T&aR|w/o PACKAGING] KT W so F Bo 8 TYPE PACKED IN TaR|w/o PACKAGING} KT W se F Bo B TYPE | 78127-1108 78127-0108 10 | 24.00 - 11.50 7.40 5.10 78127-1318 78127-0318 31 32.00 28.40 14.20 17.90 15.60 78127-1118 78127-0118 " 24.00 - 11.50 7.90 5.60 78127-1328 78127-0328 32 | 32.00 28.40 14.20 18.40 16.10 78127-1128 78127-0128 12 | 24.00 - 11.50 8.40 6.10 78127-1338 78127-0338 33 | 32.00 28.40 14.20 18.90 16.60 78127-1138 78127-0138 13 | 24.00 - 11.50 8.90 6.60 78127-1348 78127-0348 34 | 32.00 28.40 14.20 19.40 17.10 D 78127-1148 78127-0148 14 | 24.00 - 11.50 9.40 7.10 78127-1358 78127-0358 35 | 32.00 28.40 14.20 19.90 17.60 B 78127-1158 78127-0158 15 | 24.00 - 11.50 9.90 7.60 A 78127-1368 78127-0368 36 | 32.00 28.40 14.20 20.40 18.10 78127-1168 78127-0168 16 | 24.00 - 11.50 10.40 8.10 78127-1378 78127-0378 37 | 32.00 28.40 14.20 20.90 18.60 __| |__ 78127-1178 78127-0178 17, | 24.00 - 11.50 10.90 8.60 78127-1388 78127-0388 38 | 32.00 28.40 14.20 21.40 19.10 78127-1188 78127-0188 18 | 24.00 - 11.50 11.40 9.10 78127-1398 78127-0398 39 | 44.00 40.40 20.20 21.90 19.60 78127-1198 78127-0198 19 | 24.00 - 11.50 11.90 9.60 78127-1408 78127-0408 40 | 44.00 40.40 20.20 22.40 20.10 78127-1208 78127-0208 20 | 24.00 - 11.50 12.40 10.10 c 78127-1218 78127-0218 21 | 32.00 28.40 14.20 12.90 10.60 78127-1228 78127-0228 22 | 32.00 28.40 14.20 13.40 41.10 78127-1238 78127-0238 23 | 32.00 28.40 14.20 13.90 11.60 78127-1248 78127-0248 24 | 32.00 28.40 14.20 14.40 12.10 | 78127-1258 78127-0258 25 | 32.00 28.40 14.20 14.90 12.60 78127-1268 78127-0268 26 | 32.00 28.40 14.20 15.40 13.10 B 78127-1278 78127-0278 27 | 32.00 28.40 14.20 15.90 13.60 78127-1288 78127-0288 28 | 32.00 28.40 14.20 16.40 14.10 B 78127-1298 78127-0298 29 | 32.00 28.40 14.20 16.90 14.60 78127-1308 78127-0308 30 | 32.00 28.40 14.20 17.40 15.10 mez DIMENSION STYLE SCALE DESIGN UNITS == S| is UNLESS SPECIED) MM ONLY nts | METRIC |O CIRO RCHON eee mm INCH _ | DRAWN BY DATE TITLE ao RRR z W-0 T PLACES IE ELON AO 9006/05/05 0.50MM PITCH, FPC CONN. S<z.|f 3 PLACES|--- [+--- __ [CHECKED BY DATE NON-ZIF, SMT zeal e| W/O [2 PLACES|0.5 [#--- _BOKOK 2006/06/06 aA 5 = = = Ww _ 1 PLACE +--- +--- APPROVED BY DATE A mS S=S) \G/-0 fora + TLIM 2006/06/06 molex 2 S San ANGULAR + 3 MATERIAL NO. DOCUMENT NO. SHEET NO. MOSSE DRAFT WHERE APPLICABLEL_SEE TABLE SD-78127-001 6 OF 7 Pe a 4) MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B wy WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 4 Rev. G 2012/01/1110 9 8 7 6 5 4 3 2 1 Rev. G 2012/01/11 F TIN-BISMUTH PLATING TERMINAL ASSEMBLY PART NUMBERS E ASSY P/N ASSY P/N cKT W 5 - B B EMBOSSED|| ASSY P/N ASSY P/N cKT W 5 B B EMBOSSED PACKED IN T&R| W/O PACKAGING TYPE PACKED IN T&R| W/O PACKAGING TYPE | | 78127-v109 78127-0109 10. | 24.00 - 11.50 7.40 5.10 78127-1319 78127-0319 31 | 32.00 | 2840 | 14.20 1790 | 15.60 78127-1119 78127-0119 | 24.00 - 11.50 7.90 5.60 78127-1329 78127-0329 32 | 32.00 | 2840 | 14.20 18.40 16.10 78127-1129 78127-0129 12 | 24.00 - 41.50 8.40 6.10 78127-1339 78127-0339 33 | 32.00 | 28.40 | 14.20 18.90 | 16.60 D 78127-1139 78127-0139 13. | 24.00 - 11.50 8.90 6.60 78127-1349 78127-0349 34 | 32.00 | 2840 | 14.20 19.40 17.10 78127-1149 78127-0149 14 | 24.00 = 41.50 9.40 7.10 78127-1359 78127-0359 35 | 32.00 | 28.40 | 14.20 19.90 | 17.60 B 78127-1159 78127-0159 15 | 24.00 - 1.50 9.90 7.60 A 78127-1369 78127-0369 36 | 32.00 | 2840 | 1420 | 20.40 | 18.10 78127-1169 78127-0169 16 | 24.00 - 11.50 10.40 8.10 78127-1379 78127-0379 37 | 32.00 | 2840 | 1420 | 20.90 | 18.60 78127-1179 78127-0179 17_| 24.00 = 41.50 10.90 8.60 78127-1389 78127-0389 38 | 32.00 | 28.40 | 14.20 21.40 19.10 78127-1189 78127-0189 18 | 24.00 - 11.50 1.40 9.10 78127-1399 78127-0399 39 | 44.00 | 4040 | 2020 | 2190 | 19.60 78127-1199 78127-0199 19. | 24.00 = 1.50 1.90 9.60 78127-1409 78127-0409 40 | 44.00 | 4040 | 2020 | 2240 | 20.10 78127-1209 78127-0209 20 | 24.00 - 41.50 12.40 40.10 C 78127-1219 78127-0219 21 | 32.00 | 2840 | 14.20 1290 | 10.60 78127-1229 78127-0229 22 | 3200 | 2840 | 14.20 13.40 41.10 78127-1239 78127-0239 23 | 32.00 | 2840 | 14.20 13,90 11.60 78127-1249 78127-0249 24 | 32.00 | 2840 | 14.20 14.40 12.10 |__ 78127-1259 78127-0259 25 | 32.00 | 2840 | 14.20 14.90 | 12.60 3 78127-1269 78127-0269 26 | 32.00 | 2840 | 14.20 15.40 13.10 78127-1279 78127-0279 27 | 3200 | 2840 | 14.20 1590 | 13.60 78127-1289 78127-0289 28 | 32.00 | 2840 | 14.20 16.40 44.10 B 78127-1299 78127-0299 29 | 32.00 | 2840 | 14.20 16.90 | 14.60 78127-1309 78127-0309 30 | 32.00 | 2840 | 14.20 17.40 15.10 - -= = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE FS] ee UNLESS SPECISIED) MM ONLY NTS | METRIC | Cl pRovECTION T = > = mm INCH DRAWN BY DATE TITLE a == )2/07-0 PLACESE--- _[E- LIAO 2006/05/05 0.50MM PITCH, FPC CONN. 3 <x =e i 3 PLACES|4+--- +--- (CHECKED BY DATE NON-ZIF, SMT 7 =Sa\5 =0 === OKOK 2006/06/06 T=Bsisi\/-0 [2 PLACES|+0.15_|+ ae = = =| 1PLACE [t---. |+--- APPROVED BY DATE A mSS=S} \G/-0 [PLACE = TLIM 2006/06/06 molex 2 S Sag ANGULAR + 3 MATERIAL NO. DOCUMENT NO. SHEET NO, Ho eee DRAFT WHERE APPLICABLEL_SEE TABLE SD-78127-001 7_OF 7 Pt 0 =a) AIN >ZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B fe WITHIN. DIMENSIONS [A S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 | 6 | 5 | 4 | 3 | 2 | 1