APC-F203-024-050-150-150 - Advanced Power Conversion

Advanced Power Conversion PLC

APC-F203 Series DC-DC CONVERTE

An outstanding

achievement from APC is the

realisation of a TRIPLE output

converter in the industry standard “full

brick” size package.

Able to provide 3 different levels of output

voltage from 1 module, this cutting edge

design has been developed to offer maximum

versatility and supreme flexibility. This helps

simplify the design and reduce the cost of

distributed power supply architectures.

Surface mount technology and a proprietary

transformer design give reliable performance,

and space saving versatility in a cost effective

package.

The 200W DC-DC converter has fast dynamic

response times and low output ripple. The

comprehensive list of in-built protection

features such as over voltage protection,

under-voltage protection and short circuit

protection are complemented by functions

such as remote on/off and

synchronisation facility to an external

clock frequency.

200W Full Brick Triple Output Converte

FEATURES

3 different outputs from a single

standard full brick size module

 200W of power and a low profile

 Low input & output ripple currents

Thermal monitoring of voltage to

provide early warning of system fault

Remote sensing provided to allow

automatic compensation for voltage

drop.

Single connection for parallel operation

to provide true N+1 redundancy

capability

 No need for master/slave operation

 Input transient voltage protection

 External synchronisation facility

 Hot plug in capability

 Remote shutdown

 Output short circuit protection

 Wide input voltage range

 Thermal Current monitor voltage

 Output current monitor voltage

dvanced Power Conversion PL

Unit B5, Armstrong Mall, Southwood Summit Centre, Farnborough, Hants England GU14 0NR

Tele: +44 (0) 1252 407800 Fax: +44 (0) 1252 407810

E-mail: sales@apcuk.com http://www.apcuk.com

Exceeding absolute maximum ratings may cause permanent damage and may reduce reliability. Information and specifications contained in this data sheet are believed to be correct at

the time of publication. However, APC accept no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice

Outline Product Specification

PC-F203 Triple Output Full Brick DC-DC Converter - 200W

Oct 2001

Range

ote: Minimum load is 10% of lowest output current

Mechanical

Outline

General Characteristics Conditions Min Typ Max Unit

Efficiency V1=, nom,Ta=24%, Io=Io - 83 - %

Switching frequency - 300 - KHz

Isolation resistance input to output 10 - -

Calculated MTBF 80% of full load, Tc=40oc - 1.0 - Mhr.

Weight - 170 - g

NB: Absolute Maximum Ratings

Tc Operating case temperature -25 85 ºC

Tstg Storage Temperature -55 125 ºC

V1, trans Transient input voltage (100ms) 48v - 100 V

V1, trans Transient input voltage (100ms) 24v - 50 V

Viso input to output isolation voltage - 1500 V

Input Characteristics Conditions Min Typ Max Unit

V1 Operating input voltage (48V) 36 48 75

Operating input voltage (24V) 18 24 36 V

I1, typ Typical Input Current (48V) 5.2 A

(24v) 10.7

In Input reflected ripple current - 48v - 0.5A A

pp (5Hz to 20MHz) 24V - 1.0A

Ir Input Ripple rejection (120Hz) 60 dB

Controlled Output Characteristics Conditions Min Typ Max Unit

Vo1 Output Voltage Setpoint V1=V1, nom, Ta=25ºC Io=Io, max 4.965 5 5.035 V

Vo1 Output Voltage Tolerance Band Over all line, load & temeprature

conditions 4.955 5 5.045 V

Vo1 Line Regulation V1=V1, min to V1 max 0.1 %Vo

Vo1 Load Regulation Io=Io, min to Lo, max 0.1 %Vo

Vo1 Temperature Regulation Tc=25ºC to +100ºC 0.01 %/ ºC

Vo1 Vtr Load Transient voltage

deviation Vi=V1, nom, Ta=25ºC Io/ t=0.1A/us 5 %

Vo1 Ttr Load Transient Recovery Time Io change from 50% to 75% of Io, max

or 50% to 25% of Io, max 500 us

Vo1 Io Output Current The module may exceed output ripple

specification at I<Io, min 0.1 20 A

Vo1, Po, max Maximum Output Power 100 W

Vo1 Output Current Limit 20.5 22 A

Vo1 Output Ripple and Noise RMS Test frequency band width <20MHz 25 mV

Vo1 Output Ripple and Noise Peak to

Peak 50 mV

Semi-Regulated Secondary Output Characteristics Min Typ Max Unit

Vo2 & V03 Line Regulation V1, min to V1 max 1 2 %Vo

Vo2 & Vo3 Load Regulation 10% to100% Io, max 3 5 %Vo

Cross Regulation 25% to 100% of Io (controlled output) 4 6 %

Vo2 & Vo3 Output Ripple and Noise

Peak to Peak 100% of Io, max 3 6 %

Model Number Input Voltage

(V)

Output Voltage V1

(V)

Output Voltage V2

(V)

Output Voltage V3

(V)

Maximum Output Current

Vo1 (A)

Maximum Output Current

Vo2, Vo3 (A)

APC-F203-048-050-120-120 48 5.0 +/- 12 +/- 12 20 4.2

APC-F203-048-050-150-150 48 5.0 +/- 15 +/- 15 20 3.3

APC-F203-024-050-120-120 24 5.0 +/- 12 +/- 12 20 4.2

APC-F203-024-050-150-150 24 5.0 +/- 15 +/- 15 20 3.3

nternational Sa

Standards

This module has been certified

y the Nemko approval

authority to EN60950 and by

UL/CSA to UL1950 & CSA950

Please contact APC for full

details

Input Specifications (48V &

24V input models)

Unless otherwise indicated,

specifications apply over all

operating input voltage, resistive

load, and temperature condition

Note: This power module can be

used in a wide variety o

applications. To preserve

maximum flexibility, internal

fusing is not included. However,

to achieve maximum safety and

system protection, always use an

input line fuse. The safety

agencies require a normal-blow,

DC fuse with a maximum rating

of 20A. The same type fuse with

a lower rating can be used in

practice

Other versions and special custom modules available upon request