PolySwitch(R) PTC Devices PRODUCT: VTP210SSF DOCUMENT: SCD26060 PCN: D77295 REV LETTER: C REV DATE: MAY 11, 2011 PAGE NO.: 1 OF 1 Overcurrent Protection Device Specification Status: Released Electrical Rating Voltage: 16V MAX Current: 100A MAX Chip Size: 5 X 12 mm Leads: Nickel 1/4H 0.125mm nominal thickness Tape: Polyester (White) 13mm Width Solder: Lead-free Marking: (Color: Green) Manufacturer's Mark V21 Part Identification Lot Identification TABLE I. DIMENSIONS: A Mm: In*: Mm: In*: MIN 20.9 (0.82) B MAX 23.1 (0.91) MIN 4.9 (0.19) C MAX 5.3 (0.21) MIN 0.6 (0.02) D MAX 0.8 (0.03) MIN 4.1 (0.16) E MAX 5.8 (0.23) MIN 4.1 (0.16) F MAX 5.8 (0.23) MIN 3.9 (0.15) G MAX 4.1 (0.16) MIN 0.3 (0.01) MAX 0.7 (0.03) H R MIN MAX TYP --3.8 4.2 1.0 (0.15) (0.17) (0.04) *Rounded off approximation TABLE II. PERFORMANCE RATINGS: As measured in Mueller Kelvin Clips model BU-75K. I HOLD AMPS 25C HOLD 2.1 CURRENT TRIP LIMITS AMPS AT 0C HOLD TRIP 2.9 6.0 TIME TO TRIP REFERENCE RESISTANCE AMPS AMPS AMPS SECONDS AT OHMS AT 25C AT 60C AT 80C 25C,10.0A AT 25C HOLD TRIP HOLD TRIP HOLD TRIP TYP MAX MIN MAX 2.1 4.7 1.0 2.8 0.4 1.7 1.7 5 0.018 0.030 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: ONE-HOUR POST-TRIP RESISTANCE OHMS AT 25C TYP MAX 0.018 0.060 TRIPPEDSTATE POWER DISSIPATION WATTS AT 25C, 16V TYP MAX 1.2 1.5 UL, TUV, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame Materials Information: ROHS Compliant ELV Compliant Pb-Free (c) 2005, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: VTP210SSF