Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted
Symbols 1N4942 1N4944 1N4946 1N4947 1N4948 Units
Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55 I(AV) 1.0 Amp
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM 25.0 Amps
Maximum instantaneous forward voltage at: 1.0A
at: 2.0A, TA=40 VF
1.3
2.5 Volts
Maximum DC reverse current TA=25
at rated DC blocking voltage TA=175 IR
1.0
500.0 A
Maximum reverse recovery time (Note 1) Trr 150 250 500 nS
Typical junction capacitance (Note 2) CJ15.0 F
Typical thermal resistance (Note 3) R JA 55.0 /W
Operating junction and storage temperature range TJ, TSTG -65 to +175
Features
1N4942 THRU 1N4948
FAST SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 200 to 1000 Volts
Forward Current - 1.0 Ampere
High temperature metallurgically bonded construction
Hermetically sealed package
1.0 ampere operation at TA=55 with no thermal runaway
Typical IR less than 0.1 A
Capable of meeting environmental standards of
MIL-S-19500
Fast switching for high efficiency
High temperature soldering guaranteed:
350 /10 seconds, 0.375 (9.5mm) lead length,
5 lbs. (2.3Kg) tension
Maximum Ratings and Electrical Characteristics
1
Ratings at 25 ambient temperature unless otherwise specified.
Mechanical Data
Case: DO-41 solid plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode
Weight: 0.012 ounce, 0.33 gram
DIMENSIONS
DIM
inches mm
Note
Min. Max. Min. Max.
A 0.165 0.205 4.2 5.2
B 0.079 0.106 2.0 2.7
C 0.028 0.034 0.71 0.86
D 1.000 - 25.40 -
RATINGS AND CHARACTERISTIC CURVES
2
