DATA SHEET PIN Diode Chips Supplied on Film Frame Applications Switches Attenuators Features Preferred device for module applications PIN diodes supplied are 100% tested, saw cut, and mounted on film frame Low cost Description The PIN diodes that comprise this family of diodes supplied on film frames are designed for high volume applications from 10 MHz to over 3 GHz. This family contains two groups of PIN diodes: 1. Low-capacitance, low-resistance PIN diodes designed primarily for RF switching applications: SMP1320-099 SMP1321-099 SMP1322-099 SMP1340-099 SMP1353-099 2. PIN diodes with thick I-layers designed for low-distortion RF variable attenuator applications: SMP1302-099 SMP1304-099 SMP1307-099 These PIN diodes are provided as 100 percent tested, diced wafers mounted on film frames for optimal compatibility with high-volume pick-and-place assembly techniques. Absolute maximum ratings are provided in Table 1. Electrical specifications are provided in Table 2. Chip dimensions are shown in Table 3. Typical performance characteristics are illustrated in Figures 1 through 6. Figure 7 describes the wafer film frame. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200140I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * June 26, 2013 1 DATA SHEET * PIN DIODE CHIPS SUPPLIED ON FILM FRAME Table 1. PIN Diode Chips Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Reverse voltage VR Voltage rating V Power dissipation @ 25 C at the base of the chip PD 250 mW Operating temperature TOP -65 +150 C Storage temperature TSTG -65 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. CAUTION: Although these devices are designed to be as robust as possible, Electrostatic Discharge (ESD) can damage them. These devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. PIN diode chips supplied on film frames are Class 1C ESD devices. Table 2. PIN Diode Chips Electrical Specifications (Note 1) (TOP = 25 C) Voltage Rating (V) Max CJ (pF) VR = 30 V, f = 1 MHz Typ VF (mV) @ IF = 10 mA Max RS () IF = 1 mA, f = 100 MHz Max RS () IF = 10 mA, f = 100 MHz Typ TL (ns) IF = 10 mA SMP1320-099 50 0.175 850 2 typ 0.9 400 SMP1321-099 100 0.150 860 3 typ 2.0 400 SMP1322-099 50 0.850 825 1.5 0.45 typ 400 Part Number Switching Applications SMP1340-099 50 0.15 @ 10 V 880 1.7 typ 1.2 100 SMP1353-099 200 0.13 @ 20 V 825 15 2.8 1000 SMP1302-099 200 0.15 800 20 3 700 SMP1304-099 200 0.15 800 50 7 1000 SMP1307-099 200 0.20 850 75 typ 1.5 1500 Attenuator Applications Note 1: Performance is guaranteed only under the conditions listed in this Table. Reverse current is specified @ 10 A maximum at the voltage rating. This voltage should not be exceeded. The PIN diodes listed here are processed on 100 mm silicon wafers, 100% DC tested, saw cut, and shipped on 6-inch film frame hoops. Electrical rejects are identified with black ink on the film frame. Attenuators are 100% series resistance tested @ 1 mA/100 MHz. Table 3. PIN Diode Chip Dimensions Quantity of Good Diodes Per Wafer Minimum Nominal Chip Size (In) Chip Height (In) Anode Contact (In) SMP1320-099 40000 46000 0.0135 0.001 0.005 0.001 0.0030 0.0003 SMP1321-099 40000 46000 0.0135 0.001 0.005 0.001 0.0030 0.0003 SMP1322-099 40000 46000 0.0135 0.001 0.005 0.001 0.0075 0.0005 SMP1340-099 65000 72000 0.0105 0.001 0.005 0.001 0.0029 0.0003 SMP1353-099 65000 72000 0.0105 0.001 0.005 0.001 0.0070 0.0005 SMP1302-099 40000 46000 0.0135 0.001 0.005 0.001 0.0085 0.0005 SMP1304-099 40000 46000 0.0135 0.001 0.009 0.001 0.0085 0.0005 SMP1307-099 20000 25000 0.0185 0.001 0.009 0.001 0.0110 0.0005 Part Number Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 June 26, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200140I DATA SHEET * PIN DIODE CHIPS SUPPLIED ON FILM FRAME Typical Performance Characteristics (TOP = 25 C) 1.2 SMP1322 SMP1340 SMP1320 SMP1321 SMP1353 100 SMP1320 SMP1321 SMP1322 SMP1340 SMP1353 1.0 Capacitance (pF) Series Resistance () 1000 10 0.8 0.6 0.4 1 0.2 0.1 0.01 0.1 1.0 10 0 100 0 5 10 20 25 30 Figure 2. Capacitance vs Reverse Voltage Figure 1. Series Resistance vs Forward Current @ 100 MHz 0.25 10000 SMP1304 0.20 Capacitance (pF) 1000 Series Resistance () 15 Reverse Voltage (V) Forward Current (mA) SMP1302 100 10 1302 0.15 1304 0.10 0.05 1 0.1 0.01 0 0.1 1 10 100 Forward Current (mA) Figure 3. Series Resistance vs Forward Current @ 100 MHz 0 5 10 15 20 25 30 Reverse Voltage (V) Figure 4. Capacitance vs Reverse Voltage Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200140I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * June 26, 2013 3 DATA SHEET * PIN DIODE CHIPS SUPPLIED ON FILM FRAME 10000 0.5 Series Resistance () Junction Capacitance (pF) 0.6 0.4 0.3 0.2 1000 100 10 0.1 0 0 5 10 15 20 25 30 1 0.01 0.1 Reverse Voltage (V) 1 10 Forward Current (mA) Figure 5. Capacitance vs Reverse Voltage (SMP1307-099) Figure 6. Series Resistance vs Forward Current (SMP1307-099) 0.003 (0.076 mm) Nom. Separation Between Die 0.003 (0.076 mm) Separation Between Die 5.981 (151.92 mm) Outer Ring O.D. 5.520 (140.2 mm) Inner Ring I.D. 3.940 (100 mm) Wafer Dia. Grip Ring 0.236 (5.99 mm) Ring Thickness Wafer on nitto tape Color: light blue Thickness: 2.2 to 3.0 mils Tensile strength: 6.6 lbs (in width) Ring material: plastic Figure 7. Wafer Film Frame Description Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 June 26, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200140I 100 DATA SHEET * PIN DIODE CHIPS SUPPLIED ON FILM FRAME Copyright (c) 2002-2008, 2011-2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200140I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * June 26, 2013 5