66 www.calmark.com •800-854-7086
SERIES 107 ALUMINUM INSERTER - EXTRACTOR
Series 107-50 - Inserter/Extractor (Aluminum)
Calmark offers the Series 107 Aluminum
Inserter-Extractor for safe and easy
insertion and extraction of printed
circuit boards in the most severe
applications. This product series offer
a wide range of inserter-extractor with
varying features from mechanical
advantage ratios, color, board thickness,
etc. If you don't see one here that
meets your requirements, please contact
our Applications Engineers with your
specification.
FEATURES
n “Ultra strong” lever action design
overcomes insertion and extraction
forces of highest possible limits
n Widths from 7.37 (.290) to 7.92 (.312)
for printed circuit boards ranging
from 1.6 (.063) to 3.2 (.125) thick
n Actuates from a simple “U”
channel form
n Mounting detail on card retrofits
other industry standards
n Available in black anodize or clear
chemical film
n Generous area for identification
markings
n Strong and Ultra-strong lever action
overcome high insertion and
extraction forces
n 107-73 and 107-75 offers a positive
locking feature
MATERIALS/FINISH
EXTRACTOR
Aluminum alloy 6061-T6. Black anodize
per Mil-A-8625, Type II Cl. 2. or Clear
chemical film per Mil-5541 Cl 3 for a
conductive finish. Other anodize colors
or a gold chemical film also available.
Please contact an Application Engineer
with your requirements.
ROLL PIN
Stainless steel, 2.38 (.094) x 6.35
(.250) [except all Series 107-35
use 7.95 (.313) long]. Roll pins
are furnished with each inserter-
extractor. [Series 107-73 and
107-75, two roll pins]
Series Feature Board Thickness Standard
Color Mechanical
Advantage Figures
107-35 I E 1.6 (.063) black 5.5:1 1/A
C107-35 I E 1.6 (.063) clear 5.5:1 1/A
107-35-3 I E 2.4 (.093) black 5.5:1 1/A
C107-35-3 I E 2.4 (.093) clear 5.5:1 1/A
107-35-4 I E 3.2 (.125) black 5.5:1 1/A
C107-35-4 I E 3.2 (.125) clear 5.5:1 1/A
107-50 I E 1.6 (.063) black 4.5:1 2/B
C107-50 I E 1.6 (.063) clear 4.5:1 2/B
107-50-3 I E 2.4 (.093) black 4.5:1 2/B
C107-50-3 I E 2.4 (.093) clear 4.5:1 2/B
107-50-4 I E 3.2 (.125) black 4.5:1 2/B
C107-50-4 I E 3.2 (.125) clear 4.5:1 2/B
107-51 I E 1.6 (.063) black 3.3:1 3/B
C107-51 I E 1.6 (.063) clear 3.3:1 3/B
107-51-3 I E 2.4 (.093) black 3.3:1 3/B
C107-51-3 I E 2.4 (.093) clear 3.3:1 3/B
107-51-4 I E 3.2 (.125) black 3.3:1 3/B
C107-51-4 I E 3.2 (.125) clear 3.3:1 3/B
107-55 I E 1.6 (.063) black 8:1 4/B
C107-55 I E 1.6 (.063) clear 8:1 4/B
107-55-3 I E 2.4 (.093) black 8:1 4/B
C107-55-3 I E 2.4 (.093) clear 8:1 4/B
107-55-4 I E 3.2 (.125) black 8:1 4/B
C107-55-4 I E 3.2 (.125) clear 8:1 4/B
107-73 I E L 1.6 (.063) black 4.2:1 5/C
C107-73 I E L 1.6 (.063) clear 4.2:1 5/C
107-73-3 I E L 2.4 (.093) black 4.2:1 5/C
C107-73-3 I E L 2.4 (.093) clear 4.2:1 5/C
107-73-4 I E L 3.2 (.125) black 4.2:1 5/C
C107-73-4 I E L 3.2 (.125) clear 4.2:1 5/C
107-75 I E L 1.6 (.063) black 7:1 6/C
C107-75 I E L 1.6 (.063) clear 7:1 6/C
107-75-3 I E L 2.4 (.093) black 7:1 6/C
C107-75-3 I E L 2.4 (.093) clear 7:1 6/C
107-75-4 I E L 3.2 (.125) black 7:1 6/C
C107-75-4 I E L 3.2 (.125) clear 7:1 6/C
Feature: I = Inserter E = Extractor L = Latching
For Pre-start pin feature, add “P” prefix to part number
67
www.calmark.com •800-854-7086
SERIES 107 ALUMINUM INSERTER - EXTRACTOR
FIG. 1
43.2
(1.70)
7.92
(.312)
11.18
(.440)
3.96
(.156)
R
9.91
(.390)
8.26
(.325)
FIG. 5
47.5
(1.87)
50.8
(2.00)
7.37
(.290)
12.7
(5.00)
22.4 (.88)
12.06
(.475)
FIG. 6
82.5
(3.25)
7.37
(.290)
12.7
(5.00)
22.4 (.88)
12.06
(.475)
FIG. 2
50.8
(2.00)
7.37
(.290)
12.7
(5.00)
3.96
(.156)
R
12.06
(.475)
FIG. 3
38.1
(1.50)
7.37
(.290)
12.7
(5.00)
3.96
(.156)
R
12.06
(.475)
FIG. 4
88.9
(3.50)
7.37
(.290)
12.7
(5.00)
12.06
(.475)
APPLICATION DATA
Two inserter or inserter-extractors are recommended per
printed circuit board taller than 127 (5) in height.
FIG. A
7.87
(.310)
4.57 (.180)
9.4
(.37)
2.36
(.093)
Dia.
17.8
(.70)
Provides insertion and extraction travel of 7.6 (.30) min.
Nominal position of card edge when
seated in connector. The Inserter-
Extractor will allow .76 (.03) overtravel
for tolerance take-up.
Detail of Actuating Surfaces
Required on Top and Bottom Guide Plates
Card Guide
Surface
.8 (.03) max.
4.3 (.17) min.
1.02 (.040) Ref
4.83 ± .25 (.109 ± .010)
FIG. B
6.35
(.250)
6.35
(.250)
2.77
(.109)
Dia.
18.5 (.73)
9.1
(.36)
Provides insertion and extraction travel of 8.9 (.35) min.
Nominal position of card edge when
seated in connector. The Inserter-
Extractor will allow 1.3 (.05) overtravel
for tolerance take-up.
Detail of Actuating Surfaces
Required on Top and Bottom Guide Plates
7.24 ± .38
(.285 ± .015)
1.5 (.06)
Card Guide
Surface
1.5 (.06) max.
6.1 (.24) min.
FIG. C
Units: mm (in)
Unless specified otherwise,
.xx = ± .25, .x = ±.5
(.xxx = ± .010, .xx = ± .02)
Units: mm (in)
Unless specified otherwise,
.xx = ± .25, .x = ±.5
(.xxx = ± .010, .xx = ± .02)